VMware Centos虚机配置固定ip

1、查看网卡Mac地址并记录eth1对应的Mac地址

cat /etc/udev/rules.d/70-persistent-net.rules

# PCI device 0x8086:0x100f (e1000)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:f4:56:50", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

# PCI device 0x8086:0x100f (e1000)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:c7:9a:77", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

2、修改配置文件

vim /etc/sysconfig/network-scripts/ifcfg-eth0

DEVICE="eth1"
BOOTPROTO="static"
HWADDR="00:0c:29:c7:9a:77"
IPV6INIT="yes"
NM_CONTROLLED="yes"
ONBOOT="yes"
TYPE="Ethernet"
IPADDR="192.168.47.130"       ###
NETMASK="255.255.255.0"      ###
GATEWAY="192.168.47.1"        ###

3、关闭NetworkManager服务

chkconfig NetworkManager off

4、修改本机VMware Network Adapter VMnet网络属性使之与虚机可以进行通信，
其中VMnet0用于桥接模式、VMnet1用于仅主机模式、VMnet8用于Nat模式