C/C++ 多线程机制

一、C/C++多线程操作说明

C/C++多线程基本操作如下: 
1. 线程的建立结束 
2. 线程的互斥和同步 
3. 使用信号量控制线程 
4. 线程的基本属性配置 

在C/C++代码编写时,使用多线程机制,首先需要做的事情就是声明引用,具体如下:

#include "pthread.h"

二、线程基本操作方法

基本线程操作:

1. pthread_create():创建线程开始运行相关线程函数,运行结束则线程退出

2. pthread_eixt():因为exit()是用来结束进程的,所以则需要使用特定结束线程的函数

3. pthread_join():挂起当前线程,用于阻塞式地等待线程结束,如果线程已结束则立即返回,0=成功

4. pthread_cancel():发送终止信号给thread线程,成功返回0,但是成功并不意味着thread会终止

5. pthread_testcancel():在不包含取消点,但是又需要取消点的地方创建一个取消点,以便在一个没有包含取消点的执行代码线程中响应取消请求.

6. pthread_setcancelstate():设置本线程对cancle线程的反应

7. pthread_setcanceltype():设置取消状态 继续运行至下一个取消点再退出或者是立即执行取消动作

8. pthread_setcancel():设置取消状态

三、线程互斥与同步机制 

基本的互斥与同步的操作方法:

1. pthread_mutex_init():互斥锁的初始化

2. pthread_mutex_lock():锁定互斥锁,如果尝试锁定已经被上锁的互斥锁则阻塞至可用为止

3. pthread_mutex_trylock():非阻塞的锁定互斥锁

4. pthread_mutex_unlock():释放互斥锁

5. pthread_mutex_destory():互斥锁销毁函数

四、信号量线程控制机制

C/C++在使用信号量机制的时候,默认的信号量为匿名信号量。

1. sem_init(sem):初始化一个定位在sem的匿名信号量

2. sem_wait():把信号量减1操作,如果信号量的当前值为0则进入阻塞,为原子操作

3. sem_trywait():如果信号量的当前值为0则返回错误而不是阻塞调用(errno=EAGAIN),其实是sem_wait()的非阻塞版本

4. sem_post():给信号量的值加1,它是一个“原子操作”,即同时对同一个信号量做加1,操作的两个线程是不会冲突的

5. sem_getvalue(sval):把sem指向的信号量当前值放置在sval指向的整数上

6. sem_destory(sem):销毁由sem指向的匿名信号量

五、多线程实践

1. 基本的线程及建立运行

下面的代码是C/C++开发的基本的线程的运行,使用的就是最基本的pthread.h:

/* thread.c */
#include 
#include 
#include 
 
#define THREAD_NUMBER       3                 /*线程数*/
#define REPEAT_NUMBER       5                 /*每个线程中的小任务数*/
#define DELAY_TIME_LEVELS  10.0             /*小任务之间的最大时间间隔*/
//
void *thrd_func(void *arg) { 
    /* 线程函数例程 */
    int thrd_num = (int)arg;
    int delay_time = 0;
    int count = 0;
    printf("Thread %d is starting\n", thrd_num);
    for (count = 0; count < REPEAT_NUMBER; count++) {
        delay_time = (int)(rand() * DELAY_TIME_LEVELS/(RAND_MAX)) + 1;
        sleep(delay_time);
        printf("\tThread %d: job %d delay = %d\n", thrd_num, count, delay_time);
    }
 
    printf("Thread %d finished\n", thrd_num);
    pthread_exit(NULL);
}
 
int main(void) {
     pthread_t thread[THREAD_NUMBER];
     int no = 0, res;
     void * thrd_ret;
     srand(time(NULL));    
     for (no = 0; no < THREAD_NUMBER; no++) {
          /* 创建多线程 */
          res = pthread_create(&thread[no], NULL, thrd_func, (void*)no);
          if (res != 0) {
               printf("Create thread %d failed\n", no);
               exit(res);
          }
     }
 
     printf("Create treads success\n Waiting for threads to finish...\n");
     for (no = 0; no < THREAD_NUMBER; no++) {
          /* 等待线程结束 */
          res = pthread_join(thread[no], &thrd_ret);
          if (!res) {
            printf("Thread %d joined\n", no);
          } else {
            printf("Thread %d join failed\n", no);
          }
     }
     return 0;        
}

例程中循环3次建立3条线程,并且使用pthread_join函数依次等待线程结束; 
线程中使用rand()获取随机值随机休眠5次,随意会出现后执行的线程先执行完成; 
运行结果:

$ gcc thread.c -lpthread
$ ./a.out 
Create treads success
 Waiting for threads to finish...
Thread 0 is starting
Thread 1 is starting
Thread 2 is starting
Thread 1: job 0 delay = 2
Thread 1: job 1 delay = 2
Thread 0: job 0 delay = 8
Thread 2: job 0 delay = 10
Thread 2: job 1 delay = 3
Thread 1: job 2 delay = 10
Thread 0: job 1 delay = 8
Thread 0: job 2 delay = 3
Thread 0: job 3 delay = 1
Thread 2: job 2 delay = 8
Thread 1: job 3 delay = 8
Thread 1: job 4 delay = 1
Thread 1 finished
        Thread 2: job 3 delay = 6
        Thread 0: job 4 delay = 7
Thread 0 finished
Thread 0 joined
Thread 1 joined
        Thread 2: job 4 delay = 10
Thread 2 finished
Thread 2 joined

可以看到,线程1先于线程0执行,但是pthread_join的调用时间顺序,先等待线程0执行; 
由于线程1已经早结束,所以线程0被pthread_join等到的时候,线程1已结束,就在等待到线程1时,直接返回; 

2. 线程执行的互斥和同步pthread_mutex_lock

下面我们在上面的程序中增加互斥锁:

/*thread_mutex.c*/
#include 
#include 
#include 
 
#define THREAD_NUMBER        3            /* 线程数 */
#define REPEAT_NUMBER        3            /* 每个线程的小任务数 */
#define DELAY_TIME_LEVELS 10.0         /*小任务之间的最大时间间隔*/
pthread_mutex_t mutex;
 
void *thrd_func(void *arg) {
     int thrd_num = (int)arg;
     int delay_time = 0, count = 0;
     int res;
     /* 互斥锁上锁 */
     res = pthread_mutex_lock(&mutex);
     if (res) {
          printf("Thread %d lock failed\n", thrd_num);
          pthread_exit(NULL);
     }
     printf("Thread %d is starting\n", thrd_num);
     for (count = 0; count < REPEAT_NUMBER; count++) {          
         delay_time = (int)(rand() * DELAY_TIME_LEVELS/(RAND_MAX)) + 1;
         sleep(delay_time);
         printf("\tThread %d: job %d delay = %d\n", 
                                      thrd_num, count, delay_time);
     }
     printf("Thread %d finished\n", thrd_num);
     pthread_exit(NULL);
}
 
int main(void) {
     pthread_t thread[THREAD_NUMBER];
     int no = 0, res;
     void * thrd_ret;
 
     srand(time(NULL));
     /* 互斥锁初始化 */
     pthread_mutex_init(&mutex, NULL);
     for (no = 0; no < THREAD_NUMBER; no++) {
          res = pthread_create(&thread[no], NULL, thrd_func, (void*)no);
          if (res != 0) {
              printf("Create thread %d failed\n", no);
              exit(res);
          }
     }     
     printf("Create treads success\n Waiting for threads to finish...\n");
     for (no = 0; no < THREAD_NUMBER; no++) {
          res = pthread_join(thread[no], &thrd_ret);
          if (!res) {
                printf("Thread %d joined\n", no);
          } else  {
              printf("Thread %d join failed\n", no);
          }
     }   
     /****互斥锁解锁***/
     pthread_mutex_unlock(&mutex);
     pthread_mutex_destroy(&mutex);          
     return 0;        
}

在上面的例程中直接添加同步锁pthread_mutex_t; 
在线程中加入,于是程序在执行线程程序时; 
调用pthread_mutex_lock上锁,发现上锁时候后进入等待,等待锁再次释放后重新上锁; 
所以线程程序加载到队列中等待,等待成功上锁后继续执行程序代码; 
运行结果如下:

$gcc thread_mutex.c -lpthread
$ ./a.out 
Create treads success
 Waiting for threads to finish...
Thread 0 is starting
        Thread 0: job 0 delay = 9
        Thread 0: job 1 delay = 4
        Thread 0: job 2 delay = 7
Thread 0 finished
Thread 0 joined
Thread 1 is starting
        Thread 1: job 0 delay = 6
        Thread 1: job 1 delay = 4
        Thread 1: job 2 delay = 7
Thread 1 finished
Thread 1 joined
Thread 2 is starting
        Thread 2: job 0 delay = 3
        Thread 2: job 1 delay = 1
        Thread 2: job 2 delay = 6
Thread 2 finished
Thread 2 joined

 

3. 使用信号量控制线程的执行顺序sem_post

修改上面例程,上面的是使用pthread_mutex_lock互斥锁控制线程执行顺序, 
使用另外一种线程执行顺序的控制:

/* thread_sem.c */
#include 
#include 
#include 
#include 
 
#define THREAD_NUMBER       3
#define REPEAT_NUMBER       3
#define DELAY_TIME_LEVELS   10.0
 
sem_t sem[THREAD_NUMBER];
 
void * thrd_func(void *arg) {
    int thrd_num = (int)arg;
    int delay_time = 0;
    int count = 0;
    sem_wait(&sem[thrd_num]);
    printf("Thread %d is starting\n", thrd_num);
    for (count = 0; count < REPEAT_NUMBER; count++) {
        delay_time = (int)(rand() * DELAY_TIME_LEVELS/(RAND_MAX)) + 1;
        sleep(delay_time);
        printf("\tThread %d: job %d delay = %d\n", thrd_num, count, delay_time);
    }
    printf("Thread %d finished\n", thrd_num);
    pthread_exit(NULL);
}
 
int main(void) {
    pthread_t thread[THREAD_NUMBER];
    int no = 0, res;
    void * thrd_ret;
    srand(time(NULL));
    for (no = 0; no < THREAD_NUMBER; no++) {
        sem_init(&sem[no], 0, 0);
        res = pthread_create(&thread[no], NULL, thrd_func, (void*)no);
        if (res != 0) {
            printf("Create thread %d failed\n", no);
            exit(res);
        }
    }
 
    printf("Create treads success\n Waiting for threads to finish...\n");
    sem_post(&sem[THREAD_NUMBER - 1]);
    for (no = THREAD_NUMBER - 1; no >= 0; no--) {
        res = pthread_join(thread[no], &thrd_ret);
        if (!res) {
            printf("Thread %d joined\n", no);
        } else {
            printf("Thread %d join failed\n", no);
        }
        sem_post(&sem[(no + THREAD_NUMBER - 1) % THREAD_NUMBER]);           
    }
 
    for (no = 0; no < THREAD_NUMBER; no++) {
        sem_destroy(&sem[no]);      
    }
    return 0;        
}

 

执行结果,仍然是建立3条线程,每条线程执行时休眠随机时长:

$ gcc thread_sem.c -lpthread 
$ ./a.out 
Create treads success
 Waiting for threads to finish...
Thread 2 is starting
        Thread 2: job 0 delay = 9
        Thread 2: job 1 delay = 9
        Thread 2: job 2 delay = 5
Thread 2 finished
Thread 2 joined
Thread 1 is starting
        Thread 1: job 0 delay = 5
        Thread 1: job 1 delay = 7
        Thread 1: job 2 delay = 4
Thread 1 finished
Thread 1 joined
Thread 0 is starting
        Thread 0: job 0 delay = 3
        Thread 0: job 1 delay = 9
        Thread 0: job 2 delay = 8
Thread 0 finished
Thread 0 joined

执行结果与第2个例程非常相似,只不过教材中进行倒序执行而已; 
那么这种方式其实与使用互斥锁相比,代码量可读性基本持平不相上下;

 

你可能感兴趣的:(c/c++)