一、前言
在我们运维MySQL的时候，总会遇到各种情况导致程序和MySQL之间的会话异常中断，比如
假如强制关闭应用
假如client机器突然崩溃宕机/断电
假如网络发生抖动/网卡发生故障
机房级别断网那么此时正在MySQL中执行的事务会何表现？
二、实践
设计一个案例模拟client 在MySQL中执行事务，但是client机器突然down机，导致会话异常中断。
client 192.168.56.102
MySQL 192.168.56.101
client 连接db 执行 select for update 动作给记录加上锁，当然实际上 也可以是update，delete 这样的动作给记录加上锁。
然后关闭client机器模拟断电，断网。
此时server端 网络层的连接状态依然是 ESTABLISH 数据库中的事务处于running状态。
再开启另外一个会话，对t1表进行加锁需要等待，说明断网之后的事务依然处于活跃状态。
ok 表演结束 ，我们接下来继续分析网络断开，事务为啥没有退出？
三、分析
3.1 服务端为什么没有退出这个事务呢？
MySQL普通的会话连接没有保活机制，即没有设置socket属性，也没有设置心跳机制。如果网络连接异常断开服务端不能及时探测到该异常。更进一步，我们通过 TCP 关闭的四次握手来看
网络异常的时候，TCP连接的状态还是ESTABLISHED，说明 server 和 client 任何一方都没有主动发送FIN包，服务端还在等待 client端 发送数据，此时的 MySQL 事务无法直接退出。
3.2 事务在网络断开后如何处理
事务正在执行
一个连接进行事务后，如果事务语句正在执行，那么网络断开后会在语句执行完成后回滚掉。因为执行状态包不能送达客户端,因此会感知到这种网络断开的错误。调试堆栈信息参考 堆栈1。
if (thd->is_error() || (thd->variables.option_bits & OPTION_MASTER_SQL_ERROR))
trans_rollback_stmt(thd);事务执行完成未提交
如果事务中sql执行完成而没有提交，此时网络断开，那么事务还存在服务端，需要手动kill。client到server端的连接路径:
socket->listen->poll(socketfd)->accept->newthread->poll(newfd,wait_timeout)
一旦有新的数据到来，如果需要读取或者写入由于网络问题依旧使用poll进行等待，直到超时。其中参数 read_timeout/write_timeout 用于读取网络数据的，如果网络不可用，会话保持的时间就是等待网络可用的时间，也就是 wait_timeout和 read_timeout/write_timeout 均使用poll的timeout实现。见栈2，可见 vio_io_wait 函数用于处理各种超时，主要用poll来处理。
net_write_packet
->net_write_raw_loop 一个包大小16M
->vio_write ->mysql_socket_send 如果发送信息失败 inline_mysql_socket_send调用send命令 ->如果是SOCKET_EAGAIN那么通过vio_socket_io_wait函数进行判定，需要等待的时间 /* Wait for the output buffer to become writable.*/
3.3 何时退出呢？
这里需要分情况来讨论。
空闲连接状态时
此时连接的会话时间由 MySQL参数 wait_timeout 决定，默认是8h，也即会话时间空闲超过8h，会被MySQL自动关闭。详细知识可以移步到如下链接:
浅析interactive_timeout和wait_timeout
等待TCP超时
默认情况下会话会保持2小时+11次*75秒，此时服务端为啥没有退出这个事务呢？ 。(由TCP属性决定)
/proc/sys/net/ipv4/tcp_keepalive_time = 7200（等待空闲时间秒）
/proc/sys/net/ipv4/tcp_keepalive_intvl = 75（探测间隔秒）
/proc/sys/net/ipv4/tcp_keepalive_probes = 9（探测次数）
主动kill 异常会话
kill $thread_id;
我们之前遇到一次机房级别的断网，应用重连之后遇到大量sql 锁等待，于是乎，我们写了一个脚本定期kill 长时间活跃的事务，仅供大家参考。
# 针对系统运维层面
Kill_SQL="select concat('kill ', trx_mysql_thread_id ,' ;') from information_schema.processlist a,information_schema.INNODB_TRX b where a.ID=b.trx_mysql_thread_id and trx_started <=SUBDATE(now(),interval 60 second) and STATE='' and COMMAND='Sleep' and TIME>=60"
LOGFILE='/data/logs/zandb_agent/kill_long_trx.log'
run_user=`whoami`
ret_log()
{
msg="$1"
echo `date +%Y%m%d_%H:%M:%S` "[info]" " $msg" >> ${LOGFILE}
}
if [ $# -lt 1 ]; then
ports=`ps -ef |grep mysqld| grep -v mysqld_safe |grep port=|awk -F"port=" '{print $NF}' |awk '{print $1}' | sort `
else
ports=$1
fi
for port in ${ports};
do
if [ -f /tmp/long_trx_${port}.lock ];then
msg="there is a lock file ,so we skip instance ${port}.."
ret_log "${msg}"
continue
fi
if [ -S /srv/my${port}/run/mysql.sock ]; then
SOCKET="/srv/my${port}/run/mysql.sock"
else
msg="socket file does not exists,please check ."
ret_log "${msg}"
fi
MYSQL="/opt/mysql/bin/mysql -uroot -S ${SOCKET} "
${MYSQL} --skip-column-names -e "$Kill_SQL" > /tmp/kill_trx_${port}.sql.${run_user} 2>/tmp/kill_trx_${port}.log.${run_user}
num=`grep kill -c /tmp/kill_trx_${port}.sql.${run_user}`
if [[ ${num} -gt 0 ]]; then
msg="${port} ${num} long trx was killed "
ret_log "${msg}"
${MYSQL} -e "source /tmp/kill_trx_${port}.sql.${run_user}"
fi
done
栈1：回滚栈
(gdb) bt
#0 innobase_rollback (hton=0x2e12440, thd=0x7ffefc000950, rollback_trx=false) at /home/mysql/soft/percona-server-5.7.29-32/storage/innobase/handler/ha_innodb.cc:5452
#1 0x0000000000ea6ab8 in ha_rollback_low (thd=0x7ffefc000950, all=false) at /home/mysql/soft/percona-server-5.7.29-32/sql/handler.cc:2019
#2 0x00000000017f0f23 in MYSQL_BIN_LOG::rollback (this=0x2d668a0 , thd=0x7ffefc000950, all=false) at /home/mysql/soft/percona-server-5.7.29-32/sql/binlog.cc:2532
#3 0x0000000000ea6d40 in ha_rollback_trans (thd=0x7ffefc000950, all=false) at /home/mysql/soft/percona-server-5.7.29-32/sql/handler.cc:2106
#4 0x00000000015c6a13 in trans_rollback_stmt (thd=0x7ffefc000950) at /home/mysql/soft/percona-server-5.7.29-32/sql/transaction.cc:515
#5 0x00000000014c08de in mysql_execute_command (thd=0x7ffefc000950, first_level=true) at /home/mysql/soft/percona-server-5.7.29-32/sql/sql_parse.cc:5325
#6 0x00000000014c2025 in mysql_parse (thd=0x7ffefc000950, parser_state=0x7fffe88824a0, update_userstat=false) at /home/mysql/soft/percona-server-5.7.29-32/sql/sql_parse.cc:5927
#7 0x00000000014b6c5f in dispatch_command (thd=0x7ffefc000950, com_data=0x7fffe8882c90, command=COM_QUERY) at /home/mysql/soft/percona-server-5.7.29-32/sql/sql_parse.cc:1539
#8 0x00000000014b5a94 in do_command (thd=0x7ffefc000950) at /home/mysql/soft/percona-server-5.7.29-32/sql/sql_parse.cc:1060
#9 0x00000000015e9d32 in handle_connection (arg=0x3c09eb0) at /home/mysql/soft/percona-server-5.7.29-32/sql/conn_handler/connection_handler_per_thread.cc:325
#10 0x00000000018b97f2 in pfs_spawn_thread (arg=0x3b784b0) at /home/mysql/soft/percona-server-5.7.29-32/storage/perfschema/pfs.cc:2198
#11 0x00007ffff7bc6ea5 in start_thread () from /lib64/libpthread.so.0
#12 0x00007ffff5fa08dd in clone () from /lib64/libc.so.6
栈2 写入等待timeout=60000 即默认的write_timeout=60S
#0 0x00007ffff5f95c3d in poll () from /lib64/libc.so.6
#1 0x0000000001da0e3b in vio_io_wait (vio=0x7ffefc005690, event=VIO_IO_EVENT_WRITE, timeout=60000) at /home/mysql/soft/percona-server-5.7.29-32/vio/viosocket.c:1173
#2 0x0000000001d9f352 in vio_socket_io_wait (vio=0x7ffefc005690, event=VIO_IO_EVENT_WRITE) at /home/mysql/soft/percona-server-5.7.29-32/vio/viosocket.c:127
#3 0x0000000001d9f74a in vio_write (vio=0x7ffefc005690, buf=0x7ffefc013838 "\001\061\001\060\004", size=12872) at /home/mysql/soft/percona-server-5.7.29-32/vio/viosocket.c:260
#4 0x00000000016f92a3 in net_write_raw_loop (net=0x7ffefc002528, buf=0x7ffefc013838 "\001\061\001\060\004", count=12872) at /home/mysql/soft/percona-server-5.7.29-32/sql/net_serv.cc:522
#5 0x00000000016f9588 in net_write_packet (net=0x7ffefc002528, packet=0x7ffefc012a80 "\001\061\001\060\004", length=16384) at /home/mysql/soft/percona-server-5.7.29-32/sql/net_serv.cc:661
#6 0x00000000016f9177 in net_write_buff (net=0x7ffefc002528, packet=0x7ffefc936f70 "\001\061\001\060", len=4) at /home/mysql/soft/percona-server-5.7.29-32/sql/net_serv.cc:474
#7 0x00000000016f8e1c in my_net_write (net=0x7ffefc002528, packet=0x7ffefc936f70 "\001\061\001\060", len=4) at /home/mysql/soft/percona-server-5.7.29-32/sql/net_serv.cc:347
#8 0x0000000001745635 in Protocol_classic::end_row (this=0x7ffefc001c68) at /home/mysql/soft/percona-server-5.7.29-32/sql/protocol_classic.cc:1204
#9 0x00000000014571d7 in Query_result_send::send_data (this=0x7ffefc0097a0, items=...) at /home/mysql/soft/percona-server-5.7.29-32/sql/sql_class.cc:2937
#10 0x0000000001477a0d in end_send (join=0x7ffefc009a70, qep_tab=0x7ffefc93b290, end_of_records=false) at /home/mysql/soft/percona-server-5.7.29-32/sql/sql_executor.cc:2946
#11 0x000000000147461b in evaluate_join_record (join=0x7ffefc009a70, qep_tab=0x7ffefc93b118) at /home/mysql/soft/percona-server-5.7.29-32/sql/sql_executor.cc:1652
#12 0x0000000001473a5b in sub_select (join=0x7ffefc009a70, qep_tab=0x7ffefc93b118, end_of_records=false) at /home/mysql/soft/percona-server-5.7.29-32/sql/sql_executor.cc:1304
#13 0x00000000014732dc in do_select (join=0x7ffefc009a70) at /home/mysql/soft/percona-server-5.7.29-32/sql/sql_executor.cc:957
#14 0x0000000001471243 in JOIN::exec (this=0x7ffefc009a70) at /home/mysql/soft/percona-server-5.7.29-32/sql/sql_executor.cc:206
#15 0x000000000150d2d5 in handle_query (thd=0x7ffefc000950, lex=0x7ffefc003000, result=0x7ffefc0097a0, added_options=0, removed_options=0)
at /home/mysql/soft/percona-server-5.7.29-32/sql/sql_select.cc:192
#16 0x00000000014c1097 in execute_sqlcom_select (thd=0x7ffefc000950, all_tables=0x7ffefc009160) at /home/mysql/soft/percona-server-5.7.29-32/sql/sql_parse.cc:5490
#17 0x00000000014ba323 in mysql_execute_command (thd=0x7ffefc000950, first_level=true) at /home/mysql/soft/percona-server-5.7.29-32/sql/sql_parse.cc:3016
#18 0x00000000014c2025 in mysql_parse (thd=0x7ffefc000950, parser_state=0x7fffe88824a0, update_userstat=false) at /home/mysql/soft/percona-server-5.7.29-32/sql/sql_parse.cc:5927
#19 0x00000000014b6c5f in dispatch_command (thd=0x7ffefc000950, com_data=0x7fffe8882c90, command=COM_QUERY) at /home/mysql/soft/percona-server-5.7.29-32/sql/sql_parse.cc:1539
#20 0x00000000014b5a94 in do_command (thd=0x7ffefc000950) at /home/mysql/soft/percona-server-5.7.29-32/sql/sql_parse.cc:1060
#21 0x00000000015e9d32 in handle_connection (arg=0x3c09eb0) at /home/mysql/soft/percona-server-5.7.29-32/sql/conn_handler/connection_handler_per_thread.cc:325
#22 0x00000000018b97f2 in pfs_spawn_thread (arg=0x3b784b0) at /home/mysql/soft/percona-server-5.7.29-32/storage/perfschema/pfs.cc:2198
#23 0x00007ffff7bc6ea5 in start_thread () from /lib64/libpthread.so.0
#24 0x00007ffff5fa08dd in clone () from /lib64/libc.so.6
(gdb) 最后
感谢大家看到这里，文章有不足，欢迎大家指出；如果你觉得写得不错，那就给我一个赞吧。