(控制台设置不允许远程关机和重起)
在控制台有限制的时候,可以使用iis的命令远程关机和重起
C:\WINDOWS\system32>iisreset /?
IISRESET.EXE (C) Microsoft Corp. 1998-1999
用法:
iisreset [computername]
/RESTART 停止然后重新启动所有 Internet 服务。
/START 启动所有 Internet 服务。
/STOP 停止所有 Internet 服务。
/REBOOT 重新启动计算机。
/REBOOTONERROR 如果在启动、停止或重新启动 Internet 服务时出
则重新启动计算机。
/NOFORCE 如果试图正常停止服务失败,不强制终止 Internet
/TIMEOUT:val 指定等待 Internet 服务的成功停止的超时值(以秒
如果已指定 REBOOTONERROR 参数,超时
动计算机。
服务重新启动的默认值为 20 秒,停止为
机重新启动为 0 秒。
/STATUS 显示所有 Internet 服务的状态。
/ENABLE 启用本地系统上 Internet 服务的重新启动。
/DISABLE 禁用本地系统上 Internet 服务的重新启动。
@echo off
cls
echo RESTART - A restart utility for IIS web services.
echo June 1998, Microsoft Corporation.
echo ****************************************>>%SystemRoot%\restart.log
echo Stop Date/Time:>>%SystemRoot%\restart.log
echo. | date | find /i "current">>%SystemRoot%\restart.log
echo. | time | find /i "current">>%SystemRoot%\restart.log
echo.>>%SystemRoot%\restart.log
echo Stopping Web Services...
echo.
set MSFTPSVC=0
set NNTPSVC=0
set SMTPSVC=0
set W3SVC=0
set BROKSVC=0
set LDAPSVC=0
set MSGBLDSVC=0
set IISERROR=0
:MSFTPSVC
net start | find /i "FTP Publishing Service">NUL
if errorlevel==1 goto NNTPSVC
set MSFTPSVC=1
:NNTPSVC
net start | find /i "Microsoft NNTP Service">NUL
if errorlevel==1 goto SMTPSVC
set NNTPSVC=1
:SMTPSVC
net start | find /i "Microsoft SMTP Service">NUL
if errorlevel==1 goto W3SVC
set SMTPSVC=1
:W3SVC
net start | find /i "World Wide Web Publishing Service">NUL
if errorlevel==1 goto BROKSVC
set W3SVC=1
:BROKSVC
net start | find /i "Site Server Authentication Service">NUL
if errorlevel==1 goto LDAPSVC
set BROKSVC=1
:LDAPSVC
net start | find /i "Site Server LDAP Service">NUL
if errorlevel==1 goto MSGBLDSVC
set LDAPSVC=1
:MSGBLDSVC
net start | find /i "Site Server Message Builder Service">NUL
if errorlevel==1 goto STOPIIS
set MSGBLDSVC=1
:STOPIIS
net stop iisadmin /y>>%SystemRoot%\restart.log
if errorlevel==1 goto STOPERROR
goto STOPPED
:STOPERROR
REM ********************
REM * Put any desired error-handling commands here.
REM * For example, if you have the NT Resource Kit,
REM * you could use the following command to stop
REM * IIS down the hard way:
REM * KILL.EXE INETINFO.EXE
REM ********************
set IISERROR=1
:STOPPED
REM ********************
REM * Put any desired commands to run while IIS is stopped here.
REM * For example, if you have the Windows NT Resource Kit,
REM * you could use the following command to pause
REM * the restart for one minute:
REM * SLEEP.EXE 60
REM ********************
:STARTIIS
echo -------------------->>%SystemRoot%\restart.log
echo Start Date/Time:>>%SystemRoot%\restart.log
echo. | date | find /i "current">>%SystemRoot%\restart.log
echo. | time | find /i "current">>%SystemRoot%\restart.log
echo.>>%SystemRoot%\restart.log
echo Starting web services...
echo.
if %W3SVC%==0 goto NOW3SVC
net start W3SVC>>%SystemRoot%\restart.log
if errorlevel==1 set IISERROR=1
:NOW3SVC
if %MSFTPSVC%==0 goto NOMSFTPSVC
net start MSFTPSVC>>%SystemRoot%\restart.log
if errorlevel==1 set IISERROR=1
:NOMSFTPSVC
if %NNTPSVC%==0 goto NONNTPSVC
net start NNTPSVC>>%SystemRoot%\restart.log
if errorlevel==1 set IISERROR=1
:NONNTPSVC
if %SMTPSVC%==0 goto NOSMTPSVC
net start SMTPSVC>>%SystemRoot%\restart.log
if errorlevel==1 set IISERROR=1
:NOSMTPSVC
if %BROKSVC%==0 goto NOBROKSVC
net start BROKSVC>>%SystemRoot%\restart.log
if errorlevel==1 set IISERROR=1
:NOBROKSVC
if %LDAPSVC%==0 goto NOLDAPSVC
net start LDAPSVC>>%SystemRoot%\restart.log
if errorlevel==1 set IISERROR=1
:NOLDAPSVC
if %LDAPSVC%==0 goto NOMSGBLDSVC
net start MSGBLDSVC>>%SystemRoot%\restart.log
if errorlevel==1 set IISERROR=1
:NOMSGBLDSVC
if %IISERROR%==0 goto EXIT
:ERROR
echo RESTART ERROR...>>%SystemRoot%\restart.log
echo One or more of the services could not be
restarted.>>%SystemRoot%\restart.log
echo Please check the Event Viewer logs for more
information.>>%SystemRoot%\restart.log
REM ********************
REM * Put any desired error-handling commands here.
REM * For example, if you have the Windows NT Resource Kit,
REM * you could use the following command to restart
REM * the server in two minutes:
REM * SHUTDOWN.EXE /L /R /T:120 /Y
REM ********************
:EXIT
set MSFTPSVC=
set NNTPSVC=
set SMTPSVC=
set W3SVC=
set BROKSVC=
set LDAPSVC=
set MSGBLDSVC=
set IISERROR=
在控制台有限制的时候,可以使用iis的命令远程关机和重起
C:\WINDOWS\system32>iisreset /?
IISRESET.EXE (C) Microsoft Corp. 1998-1999
用法:
iisreset [computername]
/RESTART 停止然后重新启动所有 Internet 服务。
/START 启动所有 Internet 服务。
/STOP 停止所有 Internet 服务。
/REBOOT 重新启动计算机。
/REBOOTONERROR 如果在启动、停止或重新启动 Internet 服务时出
则重新启动计算机。
/NOFORCE 如果试图正常停止服务失败,不强制终止 Internet
/TIMEOUT:val 指定等待 Internet 服务的成功停止的超时值(以秒
如果已指定 REBOOTONERROR 参数,超时
动计算机。
服务重新启动的默认值为 20 秒,停止为
机重新启动为 0 秒。
/STATUS 显示所有 Internet 服务的状态。
/ENABLE 启用本地系统上 Internet 服务的重新启动。
/DISABLE 禁用本地系统上 Internet 服务的重新启动。
@echo off
cls
echo RESTART - A restart utility for IIS web services.
echo June 1998, Microsoft Corporation.
echo ****************************************>>%SystemRoot%\restart.log
echo Stop Date/Time:>>%SystemRoot%\restart.log
echo. | date | find /i "current">>%SystemRoot%\restart.log
echo. | time | find /i "current">>%SystemRoot%\restart.log
echo.>>%SystemRoot%\restart.log
echo Stopping Web Services...
echo.
set MSFTPSVC=0
set NNTPSVC=0
set SMTPSVC=0
set W3SVC=0
set BROKSVC=0
set LDAPSVC=0
set MSGBLDSVC=0
set IISERROR=0
:MSFTPSVC
net start | find /i "FTP Publishing Service">NUL
if errorlevel==1 goto NNTPSVC
set MSFTPSVC=1
:NNTPSVC
net start | find /i "Microsoft NNTP Service">NUL
if errorlevel==1 goto SMTPSVC
set NNTPSVC=1
:SMTPSVC
net start | find /i "Microsoft SMTP Service">NUL
if errorlevel==1 goto W3SVC
set SMTPSVC=1
:W3SVC
net start | find /i "World Wide Web Publishing Service">NUL
if errorlevel==1 goto BROKSVC
set W3SVC=1
:BROKSVC
net start | find /i "Site Server Authentication Service">NUL
if errorlevel==1 goto LDAPSVC
set BROKSVC=1
:LDAPSVC
net start | find /i "Site Server LDAP Service">NUL
if errorlevel==1 goto MSGBLDSVC
set LDAPSVC=1
:MSGBLDSVC
net start | find /i "Site Server Message Builder Service">NUL
if errorlevel==1 goto STOPIIS
set MSGBLDSVC=1
:STOPIIS
net stop iisadmin /y>>%SystemRoot%\restart.log
if errorlevel==1 goto STOPERROR
goto STOPPED
:STOPERROR
REM ********************
REM * Put any desired error-handling commands here.
REM * For example, if you have the NT Resource Kit,
REM * you could use the following command to stop
REM * IIS down the hard way:
REM * KILL.EXE INETINFO.EXE
REM ********************
set IISERROR=1
:STOPPED
REM ********************
REM * Put any desired commands to run while IIS is stopped here.
REM * For example, if you have the Windows NT Resource Kit,
REM * you could use the following command to pause
REM * the restart for one minute:
REM * SLEEP.EXE 60
REM ********************
:STARTIIS
echo -------------------->>%SystemRoot%\restart.log
echo Start Date/Time:>>%SystemRoot%\restart.log
echo. | date | find /i "current">>%SystemRoot%\restart.log
echo. | time | find /i "current">>%SystemRoot%\restart.log
echo.>>%SystemRoot%\restart.log
echo Starting web services...
echo.
if %W3SVC%==0 goto NOW3SVC
net start W3SVC>>%SystemRoot%\restart.log
if errorlevel==1 set IISERROR=1
:NOW3SVC
if %MSFTPSVC%==0 goto NOMSFTPSVC
net start MSFTPSVC>>%SystemRoot%\restart.log
if errorlevel==1 set IISERROR=1
:NOMSFTPSVC
if %NNTPSVC%==0 goto NONNTPSVC
net start NNTPSVC>>%SystemRoot%\restart.log
if errorlevel==1 set IISERROR=1
:NONNTPSVC
if %SMTPSVC%==0 goto NOSMTPSVC
net start SMTPSVC>>%SystemRoot%\restart.log
if errorlevel==1 set IISERROR=1
:NOSMTPSVC
if %BROKSVC%==0 goto NOBROKSVC
net start BROKSVC>>%SystemRoot%\restart.log
if errorlevel==1 set IISERROR=1
:NOBROKSVC
if %LDAPSVC%==0 goto NOLDAPSVC
net start LDAPSVC>>%SystemRoot%\restart.log
if errorlevel==1 set IISERROR=1
:NOLDAPSVC
if %LDAPSVC%==0 goto NOMSGBLDSVC
net start MSGBLDSVC>>%SystemRoot%\restart.log
if errorlevel==1 set IISERROR=1
:NOMSGBLDSVC
if %IISERROR%==0 goto EXIT
:ERROR
echo RESTART ERROR...>>%SystemRoot%\restart.log
echo One or more of the services could not be
restarted.>>%SystemRoot%\restart.log
echo Please check the Event Viewer logs for more
information.>>%SystemRoot%\restart.log
REM ********************
REM * Put any desired error-handling commands here.
REM * For example, if you have the Windows NT Resource Kit,
REM * you could use the following command to restart
REM * the server in two minutes:
REM * SHUTDOWN.EXE /L /R /T:120 /Y
REM ********************
:EXIT
set MSFTPSVC=
set NNTPSVC=
set SMTPSVC=
set W3SVC=
set BROKSVC=
set LDAPSVC=
set MSGBLDSVC=
set IISERROR=