以太坊源码系列之miner解析(2)

// 工作者是负责将消息应用到新状态的主要对象

type worker struct {
	config      *Config
	chainConfig *params.ChainConfig
	engine      consensus.Engine
	eth         Backend
	chain       *core.BlockChain

	// Feeds
	pendingLogsFeed event.Feed

	// Subscriptions
	mux          *event.TypeMux
	txsCh        chan core.NewTxsEvent    // 用来接受txPool里面的交易的通道
	txsSub       event.Subscription          // 用来接受txPool里面的交易的订阅器
	chainHeadCh  chan core.ChainHeadEvent  // 用来接受区块头的通道
	chainHeadSub event.Subscription
	chainSideCh  chan core.ChainSideEvent 
	chainSideSub event.Subscription

	// Channels
	newWorkCh          chan *newWorkReq
	taskCh             chan *task
	resultCh           chan *types.Block
	startCh            chan struct{}
	exitCh             chan struct{}
	resubmitIntervalCh chan time.Duration
	resubmitAdjustCh   chan *intervalAdjust

	current      *environment                 // An environment for current running cycle.
	localUncles  map[common.Hash]*types.Block // A set of side blocks generated locally as the possible uncle blocks.
	remoteUncles map[common.Hash]*types.Block // A set of side blocks as the possible uncle blocks.
	unconfirmed  *unconfirmedBlocks           // A set of locally mined blocks pending canonicalness confirmations.

	mu       sync.RWMutex // The lock used to protect the coinbase and extra fields
	coinbase common.Address    
	extra    []byte

	pendingMu    sync.RWMutex
	pendingTasks map[common.Hash]*task

	snapshotMu    sync.RWMutex // The lock used to protect the block snapshot and state snapshot
	snapshotBlock *types.Block     // 快照 Block
	snapshotState *state.StateDB  // 快照 StateDB

	// atomic status counters
	running int32 // The indicator whether the consensus engine is running or not.
	newTxs  int32 // New arrival transaction count since last sealing work submitting.

	// noempty is the flag used to control whether the feature of pre-seal empty
	// block is enabled. The default value is false(pre-seal is enabled by default).
	// But in some special scenario the consensus engine will seal blocks instantaneously,
	// in this case this feature will add all empty blocks into canonical chain
	// non-stop and no real transaction will be included.
	noempty uint32

	// External functions
	isLocalBlock func(block *types.Block) bool // Function used to determine whether the specified block is mined by local miner.

	// Test hooks
	newTaskHook  func(*task)                        // Method to call upon receiving a new sealing task.
	skipSealHook func(*task) bool                   // Method to decide whether skipping the sealing.
	fullTaskHook func()                             // Method to call before pushing the full sealing task.
	resubmitHook func(time.Duration, time.Duration) // Method to call upon updating resubmitting interval.
}

func newWorker(config *Config, chainConfig *params.ChainConfig, engine consensus.Engine, eth Backend, mux *event.TypeMux, isLocalBlock func(*types.Block) bool, init bool) *worker {
	worker := &worker{
		config:             config,
		chainConfig:        chainConfig,
		engine:             engine,
		eth:                eth,
		mux:                mux,
		chain:              eth.BlockChain(),
		isLocalBlock:       isLocalBlock,
		localUncles:        make(map[common.Hash]*types.Block),
		remoteUncles:       make(map[common.Hash]*types.Block),
		unconfirmed:        newUnconfirmedBlocks(eth.BlockChain(), miningLogAtDepth),
		pendingTasks:       make(map[common.Hash]*task),
		txsCh:              make(chan core.NewTxsEvent, txChanSize),
		chainHeadCh:        make(chan core.ChainHeadEvent, chainHeadChanSize),
		chainSideCh:        make(chan core.ChainSideEvent, chainSideChanSize),
		newWorkCh:          make(chan *newWorkReq),
		taskCh:             make(chan *task),
		resultCh:           make(chan *types.Block, resultQueueSize),
		exitCh:             make(chan struct{}),
		startCh:            make(chan struct{}, 1),
		resubmitIntervalCh: make(chan time.Duration),
		resubmitAdjustCh:   make(chan *intervalAdjust, resubmitAdjustChanSize),
	}
	// Subscribe NewTxsEvent for tx pool
	worker.txsSub = eth.TxPool().SubscribeNewTxsEvent(worker.txsCh)
	// Subscribe events for blockchain
	worker.chainHeadSub = eth.BlockChain().SubscribeChainHeadEvent(worker.chainHeadCh)
	worker.chainSideSub = eth.BlockChain().SubscribeChainSideEvent(worker.chainSideCh)

	// Sanitize recommit interval if the user-specified one is too short.
	recommit := worker.config.Recommit
	if recommit < minRecommitInterval {
		log.Warn("Sanitizing miner recommit interval", "provided", recommit, "updated", minRecommitInterval)
		recommit = minRecommitInterval
	}

	go worker.mainLoop()
	go worker.newWorkLoop(recommit)
	go worker.resultLoop()
	go worker.taskLoop()

	// Submit first work to initialize pending state.
	if init {
		worker.startCh <- struct{}{}
	}
	return worker
}

// newWorkLoop 是一个独立goroutine，用于在接收到的事件上提交新的挖掘工作。

func (w *worker) newWorkLoop(recommit time.Duration) {
	var (
		interrupt   *int32
		minRecommit = recommit // minimal resubmit interval specified by user.
		timestamp   int64      // timestamp for each round of mining.
	)

	timer := time.NewTimer(0)
	defer timer.Stop()
	<-timer.C // discard the initial tick

	// commit使用给定信号中止正在执行的事务，并重新提交一个新的事务。
	commit := func(noempty bool, s int32) {
		if interrupt != nil {
			atomic.StoreInt32(interrupt, s)
		}
		interrupt = new(int32)
		w.newWorkCh <- &newWorkReq{interrupt: interrupt, noempty: noempty, timestamp: timestamp}
		timer.Reset(recommit)
		atomic.StoreInt32(&w.newTxs, 0)
	}
	//清除挂起的陈旧任务。
	clearPending := func(number uint64) {
		w.pendingMu.Lock()
		for h, t := range w.pendingTasks {
			if t.block.NumberU64()+staleThreshold <= number {
				delete(w.pendingTasks, h)
			}
		}
		w.pendingMu.Unlock()
	}

	for {
		select {
		//提交一个新的任务
		case <-w.startCh:
			clearPending(w.chain.CurrentBlock().NumberU64())
			timestamp = time.Now().Unix()
			commit(false, commitInterruptNewHead)

		case head := <-w.chainHeadCh:
			clearPending(head.Block.NumberU64())
			timestamp = time.Now().Unix()
			commit(false, commitInterruptNewHead)

		case <-timer.C:
			// If mining is running resubmit a new work cycle periodically to pull in
			// higher priced transactions. Disable this overhead for pending blocks.
			if w.isRunning() && (w.chainConfig.Clique == nil || w.chainConfig.Clique.Period > 0) {
				// Short circuit if no new transaction arrives.
				if atomic.LoadInt32(&w.newTxs) == 0 {
					timer.Reset(recommit)
					continue
				}
				commit(true, commitInterruptResubmit)
			}

		case interval := <-w.resubmitIntervalCh:
			//由用户显式调整重新提交的时间间隔。
			if interval < minRecommitInterval {
				log.Warn("Sanitizing miner recommit interval", "provided", interval, "updated", minRecommitInterval)
				interval = minRecommitInterval
			}
			log.Info("Miner recommit interval update", "from", minRecommit, "to", interval)
			minRecommit, recommit = interval, interval

			if w.resubmitHook != nil {
				w.resubmitHook(minRecommit, recommit)
			}

		case adjust := <-w.resubmitAdjustCh:
			//通过反馈调整重新提交的时间间隔。
			if adjust.inc {
				before := recommit
				target := float64(recommit.Nanoseconds()) / adjust.ratio
				recommit = recalcRecommit(minRecommit, recommit, target, true)
				log.Trace("Increase miner recommit interval", "from", before, "to", recommit)
			} else {
				before := recommit
				recommit = recalcRecommit(minRecommit, recommit, float64(minRecommit.Nanoseconds()), false)
				log.Trace("Decrease miner recommit interval", "from", before, "to", recommit)
			}

			if w.resubmitHook != nil {
				w.resubmitHook(minRecommit, recommit)
			}

		case <-w.exitCh:
			return
		}
	}
}

// mainLoop是一个独立的goroutine，根据接收到的事件重新生成密封任务。

func (w *worker) mainLoop() {
	defer w.txsSub.Unsubscribe()
	defer w.chainHeadSub.Unsubscribe()
	defer w.chainSideSub.Unsubscribe()

	for {
		select {
		//从newWorkLoop接受一个新任务
		case req := <-w.newWorkCh:
		
		    //提交新的任务
			w.commitNewWork(req.interrupt, req.noempty, req.timestamp)

		case ev := <-w.chainSideCh:
			// Short circuit for duplicate side blocks
			if _, exist := w.localUncles[ev.Block.Hash()]; exist {
				continue
			}
			if _, exist := w.remoteUncles[ev.Block.Hash()]; exist {
				continue
			}
			// Add side block to possible uncle block set depending on the author.
			if w.isLocalBlock != nil && w.isLocalBlock(ev.Block) {
				w.localUncles[ev.Block.Hash()] = ev.Block
			} else {
				w.remoteUncles[ev.Block.Hash()] = ev.Block
			}
			// If our mining block contains less than 2 uncle blocks,
			// add the new uncle block if valid and regenerate a mining block.
			if w.isRunning() && w.current != nil && w.current.uncles.Cardinality() < 2 {
				start := time.Now()
				if err := w.commitUncle(w.current, ev.Block.Header()); err == nil {
					var uncles []*types.Header
					w.current.uncles.Each(func(item interface{}) bool {
						hash, ok := item.(common.Hash)
						if !ok {
							return false
						}
						uncle, exist := w.localUncles[hash]
						if !exist {
							uncle, exist = w.remoteUncles[hash]
						}
						if !exist {
							return false
						}
						uncles = append(uncles, uncle.Header())
						return false
					})
					w.commit(uncles, nil, true, start)
				}
			}

		case ev := <-w.txsCh:
		
		      //如果不进行挖掘，则将事务应用到挂起状态。
             //注:所有收到的交易可能不是连续的已经包含在当前挖掘块中。这些交易将自动消除。
			if !w.isRunning() && w.current != nil {
				// If block is already full, abort
				if gp := w.current.gasPool; gp != nil && gp.Gas() < params.TxGas {
					continue
				}
				w.mu.RLock()
				coinbase := w.coinbase
				w.mu.RUnlock()

				txs := make(map[common.Address]types.Transactions)
				for _, tx := range ev.Txs {
					acc, _ := types.Sender(w.current.signer, tx)
					txs[acc] = append(txs[acc], tx)
				}
				txset := types.NewTransactionsByPriceAndNonce(w.current.signer, txs)
				tcount := w.current.tcount
				w.commitTransactions(txset, coinbase, nil)
				// Only update the snapshot if any new transactons were added
				// to the pending block
				if tcount != w.current.tcount {
					w.updateSnapshot()
				}
			} else {
				//如果不进行挖掘，则将事务应用到挂起状态。特殊情况，如果共识引擎为0周期派系(dev模式)，
               //在这里提交挖矿，因为所有的空提交将被拒绝,预先密封(空提交)是禁用的。
				if w.chainConfig.Clique != nil && w.chainConfig.Clique.Period == 0 {
					w.commitNewWork(nil, true, time.Now().Unix())
				}
			}
			atomic.AddInt32(&w.newTxs, int32(len(ev.Txs)))
			
			......
			
		}
	}
}

如果不进行挖掘，则将事务应用到挂起状态。taskLoop是一个独立的goroutine，用于从生成器获取密封任务并将其推送到共识引擎。

// taskLoop is a standalone goroutine to fetch sealing task from the generator and
// push them to consensus engine.
func (w *worker) taskLoop() {
	var (
		stopCh chan struct{}
		prev   common.Hash
	)

	// interrupt aborts the in-flight sealing task.
	interrupt := func() {
		if stopCh != nil {
			close(stopCh)
			stopCh = nil
		}
	}
	for {
		select {
		case task := <-w.taskCh:
			if w.newTaskHook != nil {
				w.newTaskHook(task)
			}
			//因重新提交而拒绝重复密封工作。
			sealHash := w.engine.SealHash(task.block.Header())
			if sealHash == prev {
				continue
			}
			// Interrupt previous sealing operation
			interrupt()
			stopCh, prev = make(chan struct{}), sealHash

			if w.skipSealHook != nil && w.skipSealHook(task) {
				continue
			}
			w.pendingMu.Lock()
			w.pendingTasks[sealHash] = task
			w.pendingMu.Unlock()

			if err := w.engine.Seal(w.chain, task.block, w.resultCh, stopCh); err != nil {
				log.Warn("Block sealing failed", "err", err)
			}
		case <-w.exitCh:
			interrupt()
			return
		}
	}
}

resultLoop是一个独立的goroutine处理密封结果提交并将相关数据刷新到数据库。

func (w *worker) resultLoop() {
	for {
		select {
		case block := <-w.resultCh:
			// Short circuit when receiving empty result.
			if block == nil {
				continue
			}
			// Short circuit when receiving duplicate result caused by resubmitting.
			if w.chain.HasBlock(block.Hash(), block.NumberU64()) {
				continue
			}
			var (
				sealhash = w.engine.SealHash(block.Header())
				hash     = block.Hash()
			)
			w.pendingMu.RLock()
			task, exist := w.pendingTasks[sealhash]
			w.pendingMu.RUnlock()
			if !exist {
				log.Error("Block found but no relative pending task", "number", block.Number(), "sealhash", sealhash, "hash", hash)
				continue
			}
			// Different block could share same sealhash, deep copy here to prevent write-write conflict.
			var (
				receipts = make([]*types.Receipt, len(task.receipts))
				logs     []*types.Log
			)
			for i, receipt := range task.receipts {
				// add block location fields
				receipt.BlockHash = hash
				receipt.BlockNumber = block.Number()
				receipt.TransactionIndex = uint(i)

				receipts[i] = new(types.Receipt)
				*receipts[i] = *receipt
				// Update the block hash in all logs since it is now available and not when the
				// receipt/log of individual transactions were created.
				for _, log := range receipt.Logs {
					log.BlockHash = hash
				}
				logs = append(logs, receipt.Logs...)
			}
			// Commit block and state to database.
			_, err := w.chain.WriteBlockWithState(block, receipts, logs, task.state, true)
			if err != nil {
				log.Error("Failed writing block to chain", "err", err)
				continue
			}
			log.Info("Successfully sealed new block", "number", block.Number(), "sealhash", sealhash, "hash", hash,
				"elapsed", common.PrettyDuration(time.Since(task.createdAt)))

			// 广播块并宣布链插入事件
			w.mux.Post(core.NewMinedBlockEvent{Block: block})

			// 将该块插入到resultLoop中等待的块中以进行确认
			w.unconfirmed.Insert(block.NumberU64(), block.Hash())

		case <-w.exitCh:
			return
		}
	}
}

为当前周期创建一个新环境。

func (w *worker) makeCurrent(parent *types.Block, header *types.Header) error {
	state, err := w.chain.StateAt(parent.Root())
	if err != nil {
		return err
	}
	env := &environment{
		signer:    types.NewEIP155Signer(w.chainConfig.ChainID),
		state:     state,
		ancestors: mapset.NewSet(),
		family:    mapset.NewSet(),
		uncles:    mapset.NewSet(),
		header:    header,
	}

	// when 08 is processed ancestors contain 07 (quick block)
	for _, ancestor := range w.chain.GetBlocksFromHash(parent.Hash(), 7) {
		for _, uncle := range ancestor.Uncles() {
			env.family.Add(uncle.Hash())
		}
		env.family.Add(ancestor.Hash())
		env.ancestors.Add(ancestor.Hash())
	}

	// Keep track of transactions which return errors so they can be removed
	env.tcount = 0
	w.current = env
	return nil
}

更新挂起的快照块和状态。注意:此函数假设当前变量是线程安全的。

func (w *worker) updateSnapshot() {
	w.snapshotMu.Lock()
	defer w.snapshotMu.Unlock()

	var uncles []*types.Header
	w.current.uncles.Each(func(item interface{}) bool {
		hash, ok := item.(common.Hash)
		if !ok {
			return false
		}
		uncle, exist := w.localUncles[hash]
		if !exist {
			uncle, exist = w.remoteUncles[hash]
		}
		if !exist {
			return false
		}
		uncles = append(uncles, uncle.Header())
		return false
	})

	w.snapshotBlock = types.NewBlock(
		w.current.header,
		w.current.txs,
		uncles,
		w.current.receipts,
		new(trie.Trie),
	)

	w.snapshotState = w.current.state.Copy()
}

func (w *worker) commitTransactions(txs *types.TransactionsByPriceAndNonce, coinbase common.Address, interrupt *int32) bool {
	// Short circuit if current is nil
	if w.current == nil {
		return true
	}

	if w.current.gasPool == nil {
		w.current.gasPool = new(core.GasPool).AddGas(w.current.header.GasLimit)
	}

	var coalescedLogs []*types.Log

	for {
		//在以下三种情况下，我们将中断事务的执行。
        //(1)新头块事件到达时，中断信号为1
        //(2)worker启动或重启时，中断信号为1
        // (3) worker用任何新到达的事务重新创建挖掘块，中断信号为2。
        //对于前两种情况，半成品将被丢弃。
        //对于第三种情况，半成品工作将提交给consensus engine。
		if interrupt != nil && atomic.LoadInt32(interrupt) != commitInterruptNone {
			// Notify resubmit loop to increase resubmitting interval due to too frequent commits.
			if atomic.LoadInt32(interrupt) == commitInterruptResubmit {
				ratio := float64(w.current.header.GasLimit-w.current.gasPool.Gas()) / float64(w.current.header.GasLimit)
				if ratio < 0.1 {
					ratio = 0.1
				}
				w.resubmitAdjustCh <- &intervalAdjust{
					ratio: ratio,
					inc:   true,
				}
			}
			return atomic.LoadInt32(interrupt) == commitInterruptNewHead
		}
		// If we don't have enough gas for any further transactions then we're done
		if w.current.gasPool.Gas() < params.TxGas {
			log.Trace("Not enough gas for further transactions", "have", w.current.gasPool, "want", params.TxGas)
			break
		}
		// Retrieve the next transaction and abort if all done
		tx := txs.Peek()
		if tx == nil {
			break
		}
		// Error may be ignored here. The error has already been checked
		// during transaction acceptance is the transaction pool.
		//
		// We use the eip155 signer regardless of the current hf.
		from, _ := types.Sender(w.current.signer, tx)
		// Check whether the tx is replay protected. If we're not in the EIP155 hf
		// phase, start ignoring the sender until we do.
		if tx.Protected() && !w.chainConfig.IsEIP155(w.current.header.Number) {
			log.Trace("Ignoring reply protected transaction", "hash", tx.Hash(), "eip155", w.chainConfig.EIP155Block)

			txs.Pop()
			continue
		}
		// Start executing the transaction
		w.current.state.Prepare(tx.Hash(), common.Hash{}, w.current.tcount)

		logs, err := w.commitTransaction(tx, coinbase)
		
    ......
    
	if !w.isRunning() && len(coalescedLogs) > 0 {
		// We don't push the pendingLogsEvent while we are mining. The reason is that
		// when we are mining, the worker will regenerate a mining block every 3 seconds.
		// In order to avoid pushing the repeated pendingLog, we disable the pending log pushing.

		// make a copy, the state caches the logs and these logs get "upgraded" from pending to mined
		// logs by filling in the block hash when the block was mined by the local miner. This can
		// cause a race condition if a log was "upgraded" before the PendingLogsEvent is processed.
		cpy := make([]*types.Log, len(coalescedLogs))
		for i, l := range coalescedLogs {
			cpy[i] = new(types.Log)
			*cpy[i] = *l
		}
		w.pendingLogsFeed.Send(cpy)
	}
    //如果当前间隔较大，通知重新提交循环以减少重新提交的时间间隔而不是用户指定的。
	if interrupt != nil {
		w.resubmitAdjustCh <- &intervalAdjust{inc: false}
	}
	return false
}

func (w *worker) commitTransaction(tx *types.Transaction, coinbase common.Address) ([]*types.Log, error) {
	snap := w.current.state.Snapshot()
    //尝试将一个事务应用到给定的状态数据库并为其环境使用输入参数。它会返回收据对于事务，使用了gas，如果事务失败则出现错误，表示该块无效。
	receipt, err := core.ApplyTransaction(w.chainConfig, w.chain, &coinbase, w.current.gasPool, w.current.state, w.current.header, tx, &w.current.header.GasUsed, *w.chain.GetVMConfig())
	if err != nil {
		w.current.state.RevertToSnapshot(snap)
		return nil, err
	}
	w.current.txs = append(w.current.txs, tx)
	w.current.receipts = append(w.current.receipts, receipt)

	return receipt.Logs, nil
}

基于父块生成几个新的密封任务。

func (w *worker) commitNewWork(interrupt *int32, noempty bool, timestamp int64) {
	w.mu.RLock()
	defer w.mu.RUnlock()

	tstart := time.Now()
	parent := w.chain.CurrentBlock()

	if parent.Time() >= uint64(timestamp) {
		timestamp = int64(parent.Time() + 1)
	}
	// this will ensure we're not going off too far in the future
	if now := time.Now().Unix(); timestamp > now+1 {
		wait := time.Duration(timestamp-now) * time.Second
		log.Info("Mining too far in the future", "wait", common.PrettyDuration(wait))
		time.Sleep(wait)
	}

	num := parent.Number()
	header := &types.Header{
		ParentHash: parent.Hash(),
		Number:     num.Add(num, common.Big1),
		GasLimit:   core.CalcGasLimit(parent, w.config.GasFloor, w.config.GasCeil),
		Extra:      w.extra,
		Time:       uint64(timestamp),
	}
	// 只有在我们的共识引擎运行时才设置coinbase(避免虚假的块奖励)
	if w.isRunning() {
		if w.coinbase == (common.Address{}) {
			log.Error("Refusing to mine without etherbase")
			return
		}
		header.Coinbase = w.coinbase
	}
	if err := w.engine.Prepare(w.chain, header); err != nil {
		log.Error("Failed to prepare header for mining", "err", err)
		return
	}
	// 如果硬分叉，请检查是否覆盖额外数据
	if daoBlock := w.chainConfig.DAOForkBlock; daoBlock != nil {
		// Check whether the block is among the fork extra-override range
		limit := new(big.Int).Add(daoBlock, params.DAOForkExtraRange)
		if header.Number.Cmp(daoBlock) >= 0 && header.Number.Cmp(limit) < 0 {
			// Depending whether we support or oppose the fork, override differently
			if w.chainConfig.DAOForkSupport {
				header.Extra = common.CopyBytes(params.DAOForkBlockExtra)
			} else if bytes.Equal(header.Extra, params.DAOForkBlockExtra) {
				header.Extra = []byte{} // If miner opposes, don't let it use the reserved extra-data
			}
		}
	}
	// Could potentially happen if starting to mine in an odd state.
	err := w.makeCurrent(parent, header)
	if err != nil {
		log.Error("Failed to create mining context", "err", err)
		return
	}
	// Create the current work task and check any fork transitions needed
	env := w.current
	if w.chainConfig.DAOForkSupport && w.chainConfig.DAOForkBlock != nil && w.chainConfig.DAOForkBlock.Cmp(header.Number) == 0 {
		misc.ApplyDAOHardFork(env.state)
	}
	// Accumulate the uncles for the current block
	uncles := make([]*types.Header, 0, 2)
	commitUncles := func(blocks map[common.Hash]*types.Block) {
		// Clean up stale uncle blocks first
		for hash, uncle := range blocks {
			if uncle.NumberU64()+staleThreshold <= header.Number.Uint64() {
				delete(blocks, hash)
			}
		}
		for hash, uncle := range blocks {
			if len(uncles) == 2 {
				break
			}
			if err := w.commitUncle(env, uncle.Header()); err != nil {
				log.Trace("Possible uncle rejected", "hash", hash, "reason", err)
			} else {
				log.Debug("Committing new uncle to block", "hash", hash)
				uncles = append(uncles, uncle.Header())
			}
		}
	}
	// Prefer to locally generated uncle
	commitUncles(w.localUncles)
	commitUncles(w.remoteUncles)

    //根据临时复制的状态创建一个空块提前封口，无需等待封口执行完成。
	if !noempty && atomic.LoadUint32(&w.noempty) == 0 {
		w.commit(uncles, nil, false, tstart)
	}

	// Fill the block with all available pending transactions.
	pending, err := w.eth.TxPool().Pending()
	if err != nil {
		log.Error("Failed to fetch pending transactions", "err", err)
		return
	}
	// Short circuit if there is no available pending transactions.
	// But if we disable empty precommit already, ignore it. Since
	// empty block is necessary to keep the liveness of the network.
	if len(pending) == 0 && atomic.LoadUint32(&w.noempty) == 0 {
		w.updateSnapshot()
		return
	}
	// Split the pending transactions into locals and remotes
	localTxs, remoteTxs := make(map[common.Address]types.Transactions), pending
	for _, account := range w.eth.TxPool().Locals() {
		if txs := remoteTxs[account]; len(txs) > 0 {
			delete(remoteTxs, account)
			localTxs[account] = txs
		}
	}
	if len(localTxs) > 0 {
		txs := types.NewTransactionsByPriceAndNonce(w.current.signer, localTxs)
		if w.commitTransactions(txs, w.coinbase, interrupt) {
			return
		}
	}
	if len(remoteTxs) > 0 {
		txs := types.NewTransactionsByPriceAndNonce(w.current.signer, remoteTxs)
		if w.commitTransactions(txs, w.coinbase, interrupt) {
			return
		}
	}
	w.commit(uncles, w.fullTaskHook, true, tstart)
}

计算ETH的总消费费用。区块交易和收据必须有相同的顺序。

func totalFees(block *types.Block, receipts []*types.Receipt) *big.Float {
	feesWei := new(big.Int)
	for i, tx := range block.Transactions() {
		feesWei.Add(feesWei, new(big.Int).Mul(new(big.Int).SetUint64(receipts[i].GasUsed), tx.GasPrice()))
	}
	return new(big.Float).Quo(new(big.Float).SetInt(feesWei), new(big.Float).SetInt(big.NewInt(params.Ether)))
}