MySQL的MHA高可用群集部署及故障切换
一、MHA概述
1、MHA背景介绍
MHA（Master High Availability）目前在MySQL高可用方面是一个相对成熟的解决方案，它由日本人youshimation开发，是一套优秀的MySQL故障切换和主从提升的高可用软件，解决mysql主服务器单点故障的方法一般常用的有两个mmm和mha，但是一般从真正的高可用的场合，其实最常用的是mha。如何避免mysql单点故障利用mysql主从复制来解决mysql单点故障如何解决主服务器的单点问题主服务器切换后，如何通知应用新的主服务器的ip地址如何检查mysql主服务器是否可用如何处理从服务器和新主服务器之间的那种复制关系
2、MHA的组成
2.1、MHA Manager（管理节点）
Manager可以单独部署在一台独立的机器上管理多个master-slave集群，也可以部署在一台slave节点上。
2.2、MHA Node（数据节点）
Node运行在每台MySQL服务器上，MHA Manager会定时探测集群中的master节点，当master出现故障时，它可以自动将最新数据的slave提升为新的master，然后将所有其他的slave重新指向新的master。
3、MHA优点
3.1、自动故障切换过程中，MHA试图从宕机的主服务器上保存二进制日志，最大程度的保证数据不丢失
3.2、使用半同步复制，可以大大降低数据丢失的风险
3.3、目前MHA支持一主多从架构，最少三台服务，即一主两从
4、MHA缺点
4.1、需要编写脚本或利用第三方工具来实现vip的配置
4.2、MHA启动后只会对数据库进行监控，需要基于ssh免认证配置，存在一定的安全隐患
4.3、没有提供从服务器的读负载均很的功能。
二、案例拓扑图
三、案例部署
1、部署思路
1.1、MHA架构
①数据库安装
②一主两从
③MHA搭建
1.2、故障模拟
①主库失效
②备选主库成为主库
③从库2将备选主库指向为主库
1.3、故障修复
①坏库修复，启动
②在修复好的库上建立新主从关系
③修改manager配置文件，添加修好的库的记录
④重启mha
主服务器：mysql-server 20.0.0.10，从1服务器：mysql-slave1 20.0.0.20，从2服务器：mysql-slave2 20.0.0.30，mha:20.0.0.40
2、在三台 MySQL 节点上分别安装数据库
MySQL 版本请使用 5.6.36，cmake 版本请使用 2.8.6。安装过程如下。
1 主服务器
2 yum -y install ncurses-devel gcc-c++ perl-Module-Install
3 tar zxvf cmake-2.8.6.tar.gz
4 cd cmake-2.8.6
5 ./configure
6 gmake && gmake install
7 cd
8 tar zxvf mysql-5.6.36.tar.gz
9 cd mysql-5.6.36
10 cmake -DCMAKE_INSTALL_PREFIX=/usr/local/mysql -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci -DWITH_EXTRA_CHARSETS=all -DSYSCONFDIR=/etc
11 make && make install
12 cp support-files/my-default.cnf /etc/my.cnf
13 cp support-files/mysql.server /etc/rc.d/init.d/mysqld
14 chmod +x /etc/rc.d/init.d/mysqld
15 chkconfig --add mysqld
16 echo "PATH=$PATH:/usr/local/mysql/bin" >> /etc/profile
17 source /etc/profile
18 groupadd mysql
19 useradd -M -s /sbin/nologin mysql -g mysql
20 chown -R mysql.mysql /usr/local/mysql
21 mkdir -p /data/mysql
22 /usr/local/mysql/scripts/mysql_install_db --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data --user=mysql
23 echo '
24 [client]
25 port = 3306
26 socket = /usr/local/mysql/mysql.sock
27
28 [mysql]
29 port = 3306
30 socket = /usr/local/mysql/mysql.sock
31
32 [mysqld]
33 user = mysql
34 basedir = /usr/local/mysql
35 datadir = /usr/local/mysql/data
36 port = 3306
37 pid-file = /usr/local/mysql/mysqld.pid
38 socket = /usr/local/mysql/mysql.sock
39 server-id = 1
40 log_bin = master-bin
41 log-slave-updates = true
42
43 sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_AUTO_VALUE_ON_ZERO,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,PIPES_AS_CONCAT,ANSI_QUOTES' > /etc/my.cnf
44 ln -s /usr/local/mysql/bin/mysql /usr/sbin/
45 ln -s /usr/local/mysql/bin/mysqlbinlog /usr/sbin/
46 systemctl start mysqld
47 netstat -anpt | grep 3306
从1服务器
1 从1服务器
2 yum -y install ncurses-devel gcc-c++ perl-Module-Install
3 tar zxvf cmake-2.8.6.tar.gz
4 cd cmake-2.8.6
5 ./configure
6 gmake && gmake install
7 cd
8 tar zxvf mysql-5.6.36.tar.gz
9 cd mysql-5.6.36
10 cmake -DCMAKE_INSTALL_PREFIX=/usr/local/mysql -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci -DWITH_EXTRA_CHARSETS=all -DSYSCONFDIR=/etc
11 make && make install
12 cp support-files/my-default.cnf /etc/my.cnf
13 cp support-files/mysql.server /etc/rc.d/init.d/mysqld
14 chmod +x /etc/rc.d/init.d/mysqld
15 chkconfig --add mysqld
16 echo "PATH=$PATH:/usr/local/mysql/bin" >> /etc/profile
17 source /etc/profile
18 groupadd mysql
19 useradd -M -s /sbin/nologin mysql -g mysql
20 chown -R mysql.mysql /usr/local/mysql
21 mkdir -p /data/mysql
22 /usr/local/mysql/scripts/mysql_install_db --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data --user=mysql
23 echo '
24 [client]
25 port = 3306
26 socket = /usr/local/mysql/mysql.sock
27
28 [mysql]
29 port = 3306
30 socket = /usr/local/mysql/mysql.sock
31
32 [mysqld]
33 user = mysql
34 basedir = /usr/local/mysql
35 datadir = /usr/local/mysql/data
36 port = 3306
37 pid-file = /usr/local/mysql/mysqld.pid
38 socket = /usr/local/mysql/mysql.sock
39 server-id = 2
40 log_bin = master-bin
41 relay-log = relay-log-bin
42 relay-log-index = slave-relay-bin.index
43
44 sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_AUTO_VALUE_ON_ZERO,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,PIPES_AS_CONCAT,ANSI_QUOTES' > /etc/my.cnf
45 ln -s /usr/local/mysql/bin/mysql /usr/sbin/
46 ln -s /usr/local/mysql/bin/mysqlbinlog /usr/sbin/
47 systemctl start mysqld
48 netstat -anpt | grep 3306
从2服务器
1 从2服务器
2 yum -y install ncurses-devel gcc-c++ perl-Module-Install
3 tar zxvf cmake-2.8.6.tar.gz
4 cd cmake-2.8.6
5 ./configure
6 gmake && gmake install
7 cd
8 tar zxvf mysql-5.6.36.tar.gz
9 cd mysql-5.6.36
10 cmake -DCMAKE_INSTALL_PREFIX=/usr/local/mysql -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci -DWITH_EXTRA_CHARSETS=all -DSYSCONFDIR=/etc
11 make && make install
12 cp support-files/my-default.cnf /etc/my.cnf
13 cp support-files/mysql.server /etc/rc.d/init.d/mysqld
14 chmod +x /etc/rc.d/init.d/mysqld
15 chkconfig --add mysqld
16 echo "PATH=$PATH:/usr/local/mysql/bin" >> /etc/profile
17 source /etc/profile
18 groupadd mysql
19 useradd -M -s /sbin/nologin mysql -g mysql
20 chown -R mysql.mysql /usr/local/mysql
21 mkdir -p /data/mysql
22 /usr/local/mysql/scripts/mysql_install_db --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data --user=mysql
23 echo '
24 [client]
25 port = 3306
26 socket = /usr/local/mysql/mysql.sock
27
28 [mysql]
29 port = 3306
30 socket = /usr/local/mysql/mysql.sock
31
32 [mysqld]
33 user = mysql
34 basedir = /usr/local/mysql
35 datadir = /usr/local/mysql/data
36 port = 3306
37 pid-file = /usr/local/mysql/mysqld.pid
38 socket = /usr/local/mysql/mysql.sock
39 server-id = 3
40 relay-log = relay-log-bin
41 relay-log-index = slave-relay-bin.index
42
43 sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_AUTO_VALUE_ON_ZERO,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,PIPES_AS_CONCAT,ANSI_QUOTES' > /etc/my.cnf
44 ln -s /usr/local/mysql/bin/mysql /usr/sbin/
45 ln -s /usr/local/mysql/bin/mysqlbinlog /usr/sbin/
46 systemctl start mysqld
47 netstat -anpt | grep 3306
3、配置 MySQL一主两从
3.1、MySQL 主从配置相对比较简单，需要注意的是授权。步骤如下：在所有数据库节点上授权两个用户，一个是从库同步使用，另外一个是 manager 使用。
1 mysql> grant replication slave on *.* to 'myslave'@'20.0.0.%' identified by '123';
2 mysql> grant all privileges on *.* to 'mha'@'20.0.0.%' identified by 'manager';
3 mysql> flush privileges;
3.3.2、在主服务器上查看二进制文件和同步点
1 mysql> show master status;
2 +-------------------+----------+--------------+------------------+-------------------+
3 | File | Position | Binlog_Do_DB | Binlog_Ignore_DB | Executed_Gtid_Set |
4 +-------------------+----------+--------------+------------------+-------------------+
5 | master-bin.000001 | 608 | | | |
6 +-------------------+----------+--------------+------------------+-------------------+
7 1 row in set (0.00 sec)
3.3.3、接下来在从1 和 从2 分别执行同步,查看 IO 和 SQL 线程都是 yes 代表同步是否正常
1 mysql> change master to master_host='20.0.0.10',master_user='myslave',master_password='123',master_log_file='master-bin.000001',master_log_pos=608;
2 mysql> start slave;
3 mysql> show slave status\G;
4 Slave_IO_Running: Yes
5 Slave_SQL_Running: Yes
1 I/O线程显示为NO: 主库与从库网络不通、主库未授权给从库
2 SQL线程显示为NO：从库日志和位置点与主不同步
3 若从库查看连接主库I/0线程状态为conneting，一直是这个状态，考虑双方的防火墙是否开启。
3.3.4、必须设置两个从库为只读模式
1 mysql> set global read_only=1;
3.3.5、在主库插入两条数据，测试是否同步
1 mysql> create database test_xuhao;
2 mysql> use test_xuhao;
3 mysql> create table test(id int);
4 mysql> insert into test(id) values (1);
5 mysql> select * from test;
3.3.6、在两个从库分别查询如下所示说明主从同步正常
1 从1
2 mysql> select * from test_xuhao.test;
3 +------+
4 | id |
5 +------+
6 | 1 |
7 +------+
8 1 row in set (0.00 sec)
9 从2
10 mysql> select * from test_xuhao.test;
11 +------+
12 | id |
13 +------+
14 | 1 |
15 +------+
16 1 row in set (0.00 sec)
4、安装MHA软件
4.1、在所有服务器上都安装 MHA 依赖的环境，每个服务器上都需要两个源（epel.repo和CentOS7-Base-163.repo）,将这两个源放入/etc/yum.repos.d的目录下，在主服务器上操作演示安装
1 yum install epel-release --nogpgcheck
2 yum install -y perl-DBD-MySQL perl-Config-Tiny perl-Log-Dispatch perl-Parallel-ForkManager perl-ExtUtils-CBuilder perl-ExtUtils-MakeMaker perl-CPAN
4.2、在所有服务器上必须先安装 node 组件，最后在 MHA-manager 节点上安装 manager 组件，因为 manager 依赖 node 组件
1 tar zxvf mha4mysql-node-0.57.tar.gz
2 cd mha4mysql-node-0.57
3 perl Makefile.PL
4 make && make install
4.3、在mha-manager 服务器上安装 manager 组件
1 tar zxvf mha4mysql-manager-0.57.tar.gz
2 cd mha4mysql-manager-0.57
3 perl Makefile.PL
4
5 *** Module::AutoInstall version 1.06
6 *** Checking for Perl dependencies...
7 [Core Features]
8 - DBI ...loaded. (1.627)
9 - DBD::mysql ...loaded. (4.023)
10 - Time::HiRes ...loaded. (1.9725)
11 - Config::Tiny ...loaded. (2.14)
12 - Log::Dispatch ...loaded. (2.41)
13 - Parallel::ForkManager ...loaded. (1.18)
14 - MHA::NodeConst ...loaded. (0.57)
15 *** Module::AutoInstall configuration finished.
16 Checking if your kit is complete...
17 Looks good
18 Writing Makefile for mha4mysql::manager
19
20 make && make install
1 manager 安装后在/usr/local/bin 下面会生成几个工具，主要包括以下几个：
2 masterha_check_ssh 检查 MHA 的 SSH 配置状况
3 masterha_check_repl 检查 MySQL 复制状况
4 masterha_manger 启动 manager的脚本
5 masterha_check_status 检测当前 MHA 运行状态
6 masterha_master_monitor 检测 master 是否宕机
7 masterha_master_switch 控制故障转移（自动或者手动）
8 masterha_conf_host 添加或删除配置的 server 信息
9 masterha_stop 关闭manager
1 node 安装后也会在/usr/local/bin 下面会生成几个脚本（这些工具通常由 MHA-Manager 的脚本触发，无需人为操作）主要如下：
2 save_binary_logs 保存和复制 master 的二进制日志
3 apply_diff_relay_logs 识别差异的中继日志事件并将其差异的事件应用于其他的 slave
4 filter_mysqlbinlog 去除不必要的 ROLLBACK 事件（MHA 已不再使用这个工具）
5 purge_relay_logs 清除中继日志（不会阻塞 SQL 线程）
5、配置无密码认证
5.1、 在 manager服务器 上配置到所有节点的无密码认证
1 ssh-keygen -t rsa #一路按回车键
2 ssh-copy-id 20.0.0.10 #先输入yes，再输入20.0.0.10服务器的密码
3 ssh-copy-id 20.0.0.20
4 ssh-copy-id 20.0.0.30
5 验证
6 ssh [email protected]
7 ssh [email protected]
8 ssh [email protected]
5.2、在主服务器上配置到数据库节点的无密码认证
1 ssh-keygen -t rsa
2 ssh-copy-id 20.0.0.20
3 ssh-copy-id 20.0.0.30
4 验证
5 ssh [email protected]
6 ssh [email protected]
5.3、在从1服务器上配置到数据库节点的无密码认证
1 ssh-keygen -t rsa
2 ssh-copy-id 20.0.0.10
3 ssh-copy-id 20.0.0.30
4 验证
5 ssh [email protected]
6 ssh [email protected]
5.4、在从2服务器上配置到数据库节点的无密码认证
1 ssh-keygen -t rsa
2 ssh-copy-id 20.0.0.10
3 ssh-copy-id 20.0.0.20
4 验证
5 ssh [email protected]
6 ssh [email protected]
6、 配置 MHA
6.1、在 manager 节点上复制相关脚本到/usr/local/bin 目录,复制上述的自动切换时 VIP 管理的脚本到/usr/local/bin 目录，这里使用脚本管理 VIP
1 cp -ra mha4mysql-manager-0.57/samples/scripts /usr/local/bin
2 ll /usr/local/bin/scripts/
3 cp /usr/local/bin/scripts/master_ip_failover /usr/local/bin
4 vi /usr/local/bin/master_ip_failover
5 删除文件里的所有内容，复制下面的内容
6 #!/usr/bin/env perl
7 use strict;
8 use warnings FATAL => 'all';
9
10 use Getopt::Long;
11
12 my (
13 $command, $ssh_user, $orig_master_host, $orig_master_ip,
14 $orig_master_port, $new_master_host, $new_master_ip, $new_master_port
15 );
16 #############################添加内容部分#########################################
17 my $vip = '20.0.0.200';
18 my $brdc = '20.0.0.255';
19 my $ifdev = 'ens33';
20 my $key = '1';
21 my $ssh_start_vip = "/sbin/ifconfig ens33:$key $vip";
22 my $ssh_stop_vip = "/sbin/ifconfig ens33:$key down";
23 my $exit_code = 0;
24 #my $ssh_start_vip = "/usr/sbin/ip addr add $vip/24 brd $brdc dev $ifdev label $ifdev:$key;/usr/sbin/arping -q -A -c 1 -I $ifdev $vip;iptables -F;";
25 #my $ssh_stop_vip = "/usr/sbin/ip addr del $vip/24 dev $ifdev label $ifdev:$key";
26 ##################################################################################
27 GetOptions(
28 'command=s' => \$command,
29 'ssh_user=s' => \$ssh_user,
30 'orig_master_host=s' => \$orig_master_host,
31 'orig_master_ip=s' => \$orig_master_ip,
32 'orig_master_port=i' => \$orig_master_port,
33 'new_master_host=s' => \$new_master_host,
34 'new_master_ip=s' => \$new_master_ip,
35 'new_master_port=i' => \$new_master_port,
36 );
37
38 exit &main();
39
40 sub main {
41
42 print "\n\nIN SCRIPT TEST====$ssh_stop_vip==$ssh_start_vip===\n\n";
43
44 if ( $command eq "stop" || $command eq "stopssh" ) {
45
46 my $exit_code = 1;
47 eval {
48 print "Disabling the VIP on old master: $orig_master_host \n";
49 &stop_vip();
50 $exit_code = 0;
51 };
52 if ($@) {
53 warn "Got Error: $@\n";
54 exit $exit_code;
55 }
56 exit $exit_code;
57 }
58 elsif ( $command eq "start" ) {
59
60 my $exit_code = 10;
61 eval {
62 print "Enabling the VIP - $vip on the new master - $new_master_host \n";
63 &start_vip();
64 $exit_code = 0;
65 };
66 if ($@) {
67 warn $@;
68 exit $exit_code;
69 }
70 exit $exit_code;
71 }
72 elsif ( $command eq "status" ) {
73 print "Checking the Status of the script.. OK \n";
74 exit 0;
75 }
76 else {
77 &usage();
78 exit 1;
79 }
80 }
81 sub start_vip() {
82 `ssh $ssh_user\@$new_master_host \" $ssh_start_vip \"`;
83 }
84 # A simple system call that disable the VIP on the old_master
85 sub stop_vip() {
86 `ssh $ssh_user\@$orig_master_host \" $ssh_stop_vip \"`;
87 }
88
89 sub usage {
90 print
91 "Usage: master_ip_failover --command=start|stop|stopssh|status --orig_master_host=host --orig_master_ip=ip --orig_master_port=port --new_master_host=host --new_master_ip=ip --new_master_port=port\n";
92 }
拷贝后会有四个执行文件，文件的含义如下： 1 master_ip_failover #自动切换时 VIP 管理的脚本
2 master_ip_online_change #在线切换时 vip 的管理
3 power_manager #故障发生后关闭主机的脚本
4 send_report #因故障切换后发送报警的脚本
6.2、创建 MHA 软件目录并拷贝配置文件
1 mkdir /etc/masterha
2 cp mha4mysql-manager-0.57/samples/conf/app1.cnf /etc/masterha/
3 vim /etc/masterha/app1.cnf
4 [server default]
5 manager_workdir=/var/log/masterha/app1
6 manager_log=/var/log/masterha/app1/manager.log
7 master_binlog_dir=/usr/local/mysql/data
8 master_ip_failover_script= /usr/local/bin/master_ip_failover
9 master_ip_online_change_script= /usr/local/bin/master_ip_online_change10 password=manager
11 user=mha
12 ping_interval=1
13 remote_workdir=/tmp
14 repl_password=123
15 repl_user=myslave
16 secondary_check_script= /usr/local/bin/masterha_secondary_check -s 20.0.0.20 -s 20.0.0.30
17 shutdown_script=""
18 ssh_user=root
19 [server1]
20 hostname=20.0.0.10
21 port=3306
22 [server2]
23 hostname=20.0.0.20
24 port=3306
25 candidate_master=1
26 check_repl_delay=0
27 [server3]
28 hostname=20.0.0.30
29 port=3306
6.3、测试 ssh 无密码认证，如果正常最后会输出 successfully，如下所示
1 masterha_check_ssh -conf=/etc/masterha/app1.cnf
2 ......
3 Wed Oct 28 00:07:09 2020 - [debug] Connecting via SSH from [email protected](20.0.0.30:22) to [email protected](20.0.0.20:22)..
4 Wed Oct 28 00:07:10 2020 - [debug] ok.
5 Wed Oct 28 00:07:10 2020 - [debug]
6 Wed Oct 28 00:07:08 2020 - [debug] Connecting via SSH from [email protected](20.0.0.20:22) to [email protected](20.0.0.10:22)..
7 Wed Oct 28 00:07:09 2020 - [debug] ok.
8 Wed Oct 28 00:07:09 2020 - [debug] Connecting via SSH from [email protected](20.0.0.20:22) to [email protected](20.0.0.30:22)..
9 Wed Oct 28 00:07:09 2020 - [debug] ok.
10 Wed Oct 28 00:07:10 2020 - [info] All SSH connection tests passed successfully.
6.4、测试 MySQL 主从连接情况，最后出现 MySQL Replication Health is OK 字样说明正常
1 masterha_check_repl -conf=/etc/masterha/app1.cnf
2 ......
3 IN SCRIPT TEST====/sbin/ifconfig ens33:1 down==/sbin/ifconfig ens33:1 20.0.0.200===
4
5 Checking the Status of the script.. OK
6 Wed Oct 28 09:25:28 2020 - [info] OK.
7 Wed Oct 28 09:25:28 2020 - [warning] shutdown_script is not defined.
8 Wed Oct 28 09:25:28 2020 - [info] Got exit code 0 (Not master dead).
9
10 MySQL Replication Health is OK.
6.5、启动 MHA
1 nohup masterha_manager --conf=/etc/masterha/app1.cnf --remove_dead_master_conf --ignore_last_failover < /dev/null > /var/log/masterha/app1/manager.log 2>&1 &
6.6、查看 MHA 状态，可以看到当前的 master 是主服务器节点
1 masterha_check_status --conf=/etc/masterha/app1.cnf
2 app1 (pid:24405) is running(0:PING_OK), master:20.0.0.10
6.7、查看 MHA 日志，也以看到当前的 master 是 20.0.0.10
1 cat /var/log/masterha/app1/manager.log
2 ......
3 Wed Oct 28 09:27:04 2020 - [info] Replicating from 20.0.0.10(20.0.0.10:3306)
4 Wed Oct 28 09:27:04 2020 - [info] Current Alive Master: 20.0.0.10(20.0.0.10:3306)
5 Wed Oct 28 09:27:04 2020 - [info] Checking slave configurations..
6 Wed Oct 28 09:27:04 2020 - [warning] relay_log_purge=0 is not set on slave 20.0.0.20(20.0.0.20:3306).
7 Wed Oct 28 09:27:04 2020 - [warning] relay_log_purge=0 is not set on slave 20.0.0.30(20.0.0.30:3306).
8 Wed Oct 28 09:27:04 2020 - [warning] log-bin is not set on slave 20.0.0.30(20.0.0.30:3306). This host cannot be a master.
9 ......
6.8、第一次配置vip的时候，需要在主服务器上创建虚拟IP地址
1 ifconfig ens33:1 20.0.0.200/24
2 ifconfig
四、故障测试
1、关闭主服务器的mysql服务
1 pkill mysqld
2、查看从1服务器的虚拟IP地址有没有转移过来，从2上查看主服务器是不是从1
1 从1服务器
2 ifconfig
3 ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
4 inet 20.0.0.20 netmask 255.255.255.0 broadcast 20.0.0.255
5 inet6 fe80::a140:18a2:d866:8f33 prefixlen 64 scopeid 0x20<link>
6 ether 00:0c:29:42:10:0a txqueuelen 1000 (Ethernet)
7 RX packets 1315993 bytes 1324408060 (1.2 GiB)
8 RX errors 0 dropped 0 overruns 0 frame 0
9 TX packets 795190 bytes 69519345 (66.2 MiB)
10 TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
11
12 ens33:1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
13 inet 20.0.0.200 netmask 255.0.0.0 broadcast 20.255.255.255
14 ether 00:0c:29:42:10:0a txqueuelen 1000 (Ethernet)
15
16 从2服务器
17 mysql
18 mysql> show slave status \G
19 *************************** 1. row ***************************
20 Slave_IO_State: Waiting for master to send event
21 Master_Host: 20.0.0.20
22 Master_User: myslave
23 Master_Port: 3306
24 Connect_Retry: 60
25 Master_Log_File: master-bin.000003
26 Read_Master_Log_Pos: 120
27 Relay_Log_File: relay-log-bin.000002
28 Relay_Log_Pos: 284
29 Relay_Master_Log_File: master-bin.000003
30 Slave_IO_Running: Yes
31 Slave_SQL_Running: Yes
32 ......
3、重新开启manager服务器xml
3.1、主服务器开启mysql服务
1 systemctl restart mysqld
3.2、查看从1服务器查看二进制文件和同步点
1 mysql> show master status;
2 +-------------------+----------+--------------+------------------+-------------------+
3 | File | Position | Binlog_Do_DB | Binlog_Ignore_DB | Executed_Gtid_Set |
4 +-------------------+----------+--------------+------------------+-------------------+
5 | master-bin.000003 | 120 | | | |
6 +-------------------+----------+--------------+------------------+-------------------+
7 1 row in set (0.00 sec)
3.3、在主服务器上执行同步,查看 IO 和 SQL 线程都是 yes 代表同步是否正常
1 mysql> change master to
2 master_host='20.0.0.20',master_user='myslave',master_password='123',master_log_file='master-bin.000003',master_log_pos=120;
3 mysql> start slave;
4 mysql> show slave status \G
5 *************************** 1. row ***************************
6 Slave_IO_State: Waiting for master to send event
7 Master_Host: 20.0.0.20
8 Master_User: myslave
9 Master_Port: 3306
10 Connect_Retry: 60
11 Master_Log_File: master-bin.000003
12 Read_Master_Log_Pos: 120
13 Relay_Log_File: mysqld-relay-bin.000002
14 Relay_Log_Pos: 284
15 Relay_Master_Log_File: master-bin.000003
16 Slave_IO_Running: Yes
17 Slave_SQL_Running: Yes18 ......
3.4、在从1上创建，主服务器和从2上查看
1 从1服务器
2 mysql> create database aa;
3 mysql> use aa;
4 mysql> create table test(id int(3));
5 mysql> insert into test values(1);
6 mysql> select * from test;
7 +------+
8 | id |
9 +------+
10 | 1 |
11 +------+
12
13 主服务器
14 mysql> use aa;
15 mysql> select * from test;
16 +------+
17 | id |
18 +------+
19 | 1 |
20 +------+
21
22 从2服务器
23 mysql> use aa;
24 mysql> select * from test;
25 +------+
26 | id |
27 +------+
28 | 1 |
29 +------+](javascript:void(0);)
3.5、在manager服务器上修改配置文件(再把这个记录添加进去，因为它检测掉失效时候会自动消失)
1 vi /etc/masterha/app1.cnf
2 ......
3 [server1]
4 hostname=192.168.8.134
5 port=3306
6 ......
3.6、在manager服务器上启动manager
1 masterha_check_ssh -conf=/etc/masterha/app1.cnf
2 masterha_check_repl -conf=/etc/masterha/app1.cnf
3 nohup masterha_manager --conf=/etc/masterha/app1.cnf --remove_dead_master_conf --ignore_last_failover < /dev/null > /var/log/masterha/app1/manager.log 2>&1 &
4 masterha_check_status --conf=/etc/masterha/app1.cnf
总结
MHA目前在MySQL高可用方面是一个相对成熟的解决方案，在进行故障切换的过程中，MHA能最大程度上保证数据库的一致性，以达到真正意义上的高可用
1、从宕机崩溃的master保存二进制日志事件（binlog events）；
2、识别含有最新更新的slave；
3、应用差异的中继日志（relay log）到其他slave；
4、应用从master保存的二进制日志事件（binlog events）；
5、提升一个slave为新master；