Getting Started with Blocks
本文来源为：developer.apple.com，仅仅是博主练习排版所用。
Getting Started with Blocks
The following sections help you to get started with blocks using practical examples.
Declaring and Using a Block
You use the ^ operator to declare a block variable and to indicate the beginning of a block literal. The body of the block itself is contained within {}, as shown in this example (as usual with C, ; indicates the end of the statement):
int multiplier = 7;
int (^myBlock)(int) = ^(int num) {
return num * multiplier;
};
The example is explained in the following illustration:
Notice that the block is able to make use of variables from the same scope in which it was defined.
If you declare a block as a variable, you can then use it just as you would a function:
int multiplier = 7;
int (^myBlock)(int) = ^(int num) {
return num * multiplier;
};
printf("%d", myBlock(3));
// prints "21"
Using a Block Directly
In many cases, you don’t need to declare block variables; instead you simply write a block literal inline where it’s required as an argument. The following example uses the qsort_b function. qsort_b is similar to the standard qsort_r function, but takes a block as its final argument.
char *myCharacters[3] = { "TomJohn", "George", "Charles Condomine" };
qsort_b(myCharacters, 3, sizeof(char *), ^(const void *l, const void *r) {
char *left = *(char **)l;
char *right = *(char **)r;
return strncmp(left, right, 1);
});
Blocks with Cocoa
Several methods in the Cocoa frameworks take a block as an argument, typically either to perform an operation on a collection of objects, or to use as a callback after an operation has finished. The following example shows how to use a block with the NSArray method sortedArrayUsingComparator:. The method takes a single argument—the block. For illustration, in this case the block is defined as an NSComparator local variable:
NSArray *stringsArray = @[ @"string 1",
@"String 21",
@"string 12",
@"String 11",
@"String 02" ];
static NSStringCompareOptions comparisonOptions = NSCaseInsensitiveSearch | NSNumericSearch |
NSWidthInsensitiveSearch | NSForcedOrderingSearch;
NSLocale *currentLocale = [NSLocale currentLocale];
NSComparator finderSortBlock = ^(id string1, id string2) {
NSRange string1Range = NSMakeRange(0, [string1 length]);
return [string1 compare:string2 options:comparisonOptions range:string1Range locale:currentLocale];
};
NSArray *finderSortArray = [stringsArray sortedArrayUsingComparator:finderSortBlock];
NSLog(@"finderSortArray: %@", finderSortArray);
/*
Output: NSArray *stringArray = @[ @"string 1", @"string 2", @"string21", @"string 12", @"string 02"];
NSComparator finderSortBlock = ^(id string1, id string2){
NSRange string1Range = NSMakeRange(0, [string1 length]);
return [string1 compare:string2 options:comparisonOptions range:string1Range locale:currentLocale];
};
NSArray *findSortArray = [stringArray sortedArrayUsingComparator:finderSortBlock];
NSLog(@"...:%@",findSortArray);
finderSortArray: (
"string 1",
"String 02",
"String 11",
"string 12",
"String 21"
)
*/
__block Variables
A powerful feature of blocks is that they can modify variables in the same lexical scope. You signal that a block can modify a variable using the __block storage type modifier. Adapting the example shown in Blocks with Cocoa, you could use a block variable to count how many strings are compared as equal as shown in the following example. For illustration, in this case the block is used directly and uses currentLocale as a read-only variable within the block:
NSArray *stringsArray = @[ @"string 1",
@"String 21", // <-
@"string 12",
@"String 11",
@"Strîng 21", // <-
@"Striñg 21", // <-
@"String 02" ];
NSLocale *currentLocale = [NSLocale currentLocale];
__block NSUInteger orderedSameCount = 0;
NSArray *diacriticInsensitiveSortArray = [stringsArray sortedArrayUsingComparator:^(id string1, id string2) {
NSRange string1Range = NSMakeRange(0, [string1 length]);
NSComparisonResult comparisonResult = [string1 compare:string2 options:NSDiacriticInsensitiveSearch range:string1Range locale:currentLocale];
if (comparisonResult == NSOrderedSame) {
orderedSameCount++;
}
return comparisonResult;
}];
NSLog(@"diacriticInsensitiveSortArray: %@", diacriticInsensitiveSortArray);
NSLog(@"orderedSameCount: %d", orderedSameCount);
/*
Output:
diacriticInsensitiveSortArray: (
"String 02",
"string 1",
"String 11",
"string 12",
"String 21",
"Str\U00eeng 21",
"Stri\U00f1g 21"
)
orderedSameCount: 2
*/
This is discussed in greater detail in Blocks and Variables.