1、redis哨兵（Sentinel）
1.1、redis集群介绍
前面文章讲的主从复制集群是无法实现master和slave角色的自动切换的，如果master节点出现现redis服务异常、主机断电、磁盘损坏等问题导致master无法使用，而redis主从复制无法实现自动的故障转移(将slave 自动提升为新master)，需要手动修改环境配置,才能切换到slave redis服务器，另外当单台Redis服务器性能无法满足业务写入需求的时候,也无法横向扩展Redis服务的并行写入性能。
需要解决以上的两个核心问题：
- master和slave角色的无缝切换，让业务无感知从而不影响业务使用；
- 可横向动态扩展Redis服务器，从而实现多台服务器并行写入以实现更高并发的目的。
Redis集群实现的方式：
- 客户端分片: 由应用决定将不同的KEY发送到不同的Redis服务器
- 代理分片: 由代理决定将不同的KEY发送到不同的Redis服务器,代理程序如:codis,twemproxy等
- Redis Cluster
1.2、redis哨兵（Sentinel）的工作原理
Sentinel可以管理多个redis主从集群
Sentinel 进程是用于监控redis集群中Master主服务器工作的状态，在Master主服务器发生故障的时候，可以实现Master和Slave服务器的切换，保证系统的高可用，此功能在redis2.6+的版本已引用，Redis的哨兵模式到了2.8版本之后就稳定了下来。一般在生产环境也建议使用Redis的2.8版本的以后版本
哨兵(Sentinel) 是一个分布式系统，可以在一个架构中运行多个哨兵(sentinel) 进程，这些进程使用流言协议(gossip protocols)来接收关于Master主服务器是否下线的信息，并使用投票协议(Agreement Protocols)来决定是否执行自动故障迁移,以及选择哪个Slave作为新的Master
每个哨兵(Sentinel)进程会向其它哨兵(Sentinel)、Master、Slave定时发送消息，以确认对方是否”活”着，如果发现对方在指定配置时间(此项可配置)内未得到回应，则暂时认为对方已离线，也就是所谓的”主观认为宕机” (主观:是每个成员都具有的独自的而且可能相同也可能不同的意识)，英文名称：Subjective Down，简称SDOWN
有主观宕机，对应的有客观宕机。当“哨兵群”中的多数Sentinel进程在对Master主服务器做出SDOWN 的判断，并且通过 SENTINEL is-master-down-by-addr 命令互相交流之后，得出的Master Server下线判断，这种方式就是“客观宕机”(客观:是不依赖于某种意识而已经实际存在的一切事物)，英文名称是：Objectively Down， 简称 ODOWN
通过一定的vote算法，从剩下的slave从服务器节点中，选一台提升为Master服务器节点，然后自动修改相关配置，并开启故障转移（failover）
Sentinel 机制可以解决master和slave角色的自动切换问题，但单个 Master 的性能瓶颈问题无法解决,类似于MySQL中的MHA功能
Redis Sentinel中的Sentinel节点个数应该为大于等于3且最好为奇数
客户端初始化时连接的是Sentinel节点集合，不再是具体的Redis节点，但Sentinel只是配置中心不是代理。
Redis Sentinel节点与普通redis没有区别,要实现读写分离依赖于客户端程序
redis 3.0之前版本中,生产环境一般使用哨兵模式,3.0后推出redis cluster功能,可以支持更大规模的生产环境sentinel中的三个定时任务：
1.2.1sentinel中的三个定时任务：
- 每10秒每个sentinel对master和slave执行info，发现slave节点，确认主从关系。
- 每2秒每个sentinel通过master节点的channel交换信息(pub/sub)通过sentinel__:hello频道交互，交互对节点的“看法”和自身信息
- 每1秒每个sentinel对其他sentinel和redis执行ping
1.3、实现哨兵
环境准备：
准备三台主机搭建主从集群，再在每个机器上搭建sentinel
| IP | redis版本 | 主机名 |
| 10.0.0.101 | redis-5.0.14 | node1 |
| 10.0.0.102 | redis-5.0.14 | node2 |
| 10.0.0.103 | redis-5.0.14 | node3 |
1.3.1、实现哨兵需要先实现一下主从复制的架构
哨兵的前提是已经实现了一个redis的主从复制的运行环境，从而实现一个一主两从基于哨兵的高可用redis架构
注意: master的配置文件中masterauth和slave都必须相同
主从复制上篇文章已经实现了，这里继续用上一篇的环境
#主节点 [root@master etc]#redis-cli -a 123456 Warning: Using a password with '-a' or '-u' option on the command line interface may not be safe. 127.0.0.1:6379> info replication # Replication role:master connected_slaves:2 slave0:ip=10.0.0.102,port=6379,state=online,offset=14,lag=1 slave1:ip=10.0.0.103,port=6379,state=online,offset=14,lag=0 master_replid:e9310fdb8dd9f91d265d4c9a8621a6879e0262ff master_replid2:0000000000000000000000000000000000000000 master_repl_offset:14 second_repl_offset:-1 repl_backlog_active:1 repl_backlog_size:1048576 repl_backlog_first_byte_offset:1 repl_backlog_histlen:14 127.0.0.1:6379> #slave1节点 [root@slave1 ~]#redis-cli -a 123456 Warning: Using a password with '-a' or '-u' option on the command line interface may not be safe. 127.0.0.1:6379> info replication # Replication role:slave master_host:10.0.0.101 master_port:6379 master_link_status:up master_last_io_seconds_ago:8 master_sync_in_progress:0 slave_repl_offset:224 slave_priority:100 slave_read_only:1 connected_slaves:0 master_replid:e9310fdb8dd9f91d265d4c9a8621a6879e0262ff master_replid2:0000000000000000000000000000000000000000 master_repl_offset:224 second_repl_offset:-1 repl_backlog_active:1 repl_backlog_size:1048576 repl_backlog_first_byte_offset:1 repl_backlog_histlen:224 #slave2节点 [root@slave2 ~]#redis-cli -a 123456 Warning: Using a password with '-a' or '-u' option on the command line interface may not be safe. 127.0.0.1:6379> info replication # Replication role:slave master_host:10.0.0.101 master_port:6379 master_link_status:up master_last_io_seconds_ago:7 master_sync_in_progress:0 slave_repl_offset:2016 slave_priority:100 slave_read_only:1 connected_slaves:0 master_replid:ee9d24063f9d79d698e875634517923d6a9c2a10 master_replid2:0000000000000000000000000000000000000000 master_repl_offset:2016 second_repl_offset:-1 repl_backlog_active:1 repl_backlog_size:1048576 repl_backlog_first_byte_offset:1 repl_backlog_histlen:2016
1.3.2、编辑哨兵的配置文件
Sentinel实际上是一个特殊的redis服务器,有些redis指令支持,但很多指令并不支持.默认监听在26379/tcp端口.所有redis节点使用相同的以下的配置文件.
#这里因为我是源码编译安装的，所以要人源码的路径下找到sentinel.conf将其复制到redis安装的目录下 [root@master]# cd /usr/local/src/redis-5.0.14[root@master /usr/local/src/redis-5.0.14# ls 00-RELEASENOTES CONTRIBUTING INSTALL README.md runtest-cluster sentinel.conf TLS.md BUGS COPYING Makefile redis.conf runtest-moduleapi src utils CONDUCT deps MANIFESTO runtest runtest-sentinel tests [root@master etc]#sed -i "/^#/d" redis-sentinel.conf [root@master etc]#sed -i "/^$/d" redis-sentinel.conf [root@master etc]#vim redis-sentinel.con bind 0.0.0.0 port 26379 daemonize no pidfile /apps/redis/run/redis-sentinel.pid logfile /apps/redis/log/sentinel.log dir /tmp sentinel monitor mymaster 10.0.0.100 6379 2 #mymaster是集群的名称，此行指定当前mymaster集群中master服务器的地址和端口 #2为法定人数限制(quorum)，即有几个sentinel认为master down了就进行故障转移，一般此值是所有sentinel节点(一般总数是>=3的 奇数,如:3,5,7等)的一半以上的整数值，比如，总数是3，即3/2=1.5，取整为2,是master的ODOWN客观下线的依据 sentinel auth-pass mymaster wm521314 #mymaster集群中master的密码，注意此行要在上面行的下面 sentinel down-after-milliseconds mymaster 3000 #(SDOWN)判断mymaster集群中所有节点的主观下线的时间，单位：毫秒，建议3000 sentinel parallel-syncs mymaster 1 #发生故障转移后，可以同时向新master同步数据的slave的数量，数字越小总同步时间越长，但可以减轻新master的负载压力 sentinel failover-timeout mymaster 180000 #所有slaves指向新的master所需的超时时间，单位：毫秒 sentinel deny-scripts-reconfig yes #禁止修改脚本 [root@master etc]# scp /apps/redis/etc/redis-sentinel.conf 10.0.0.102:/apps/redis/etc/[root@master etc]# scp /apps/redis/etc/redis-sentinel.conf 10.0.0.103:/apps/redis/etc/
三个哨兵服务器的配置都如下：
[root@slave2 etc]#cat redis-sentinel.conf port 26379 daemonize no pidfile /apps/redis/run/redis-sentinel.pid logfile /apps/redis/log/sentinel.log dir /tmp sentinel monitor mymaster 10.0.0.101 6379 2 sentinel down-after-milliseconds mymaster 30000 sentinel parallel-syncs mymaster 1 sentinel failover-timeout mymaster 180000 sentinel deny-scripts-reconfig yes
1.3.2、启动哨兵
#我这里是编译安装，所以在所有节点生成新的service文件 [root@master ~]#vim /lib/systemd/system/redis-sentinel.service [Unit] Description=Redis Sentinel After=network.target [Service] ExecStart=/apps/redis/bin/redis-sentinel /apps/redis/etc/redis-sentinel.conf --supervised systemd ExecStop=/bin/kill -s QUIT $MAINPID User=redis Group=redis RuntimeDirectory=redis RuntimeDirectoryMode=0755 [Install] WantedBy=multi-user.target [root@master ~]#scp /lib/systemd/system/redis-sentinel.service 10.0.0.102:/lib/systemd/system/ [root@master ~]#scp /lib/systemd/system/redis-sentinel.service 10.0.0.103:/lib/systemd/system/ #在所有节点修改一下文件的所有者所属组，不然无法启动 chown -R redis.redis /apps/redis/ #在所有节点启动哨兵 [root@master ~]#systemctl daemon-reload [root@master ~]#systemctl enable --now redis-sentinel.service
1.3.3、验证哨兵端口
[root@master ~]#ss -nlt State Recv-Q Send-Q Local Address:Port Peer Address:Port Process LISTEN 0 511 0.0.0.0:26379 0.0.0.0:* #已经启动，另外两个节点同样查看 LISTEN 0 511 0.0.0.0:6379 0.0.0.0:* LISTEN 0 1024 127.0.0.53%lo:53 0.0.0.0:* LISTEN 0 128 0.0.0.0:22 0.0.0.0:* LISTEN 0 128 127.0.0.1:6010 0.0.0.0:* LISTEN 0 511 [::]:26379 [::]:* LISTEN 0 128 [::]:22 [::]:* LISTEN 0 128 [::1]:6010 [::]:*
1.3.4、查看哨兵日志
[root@master ~]#tail -f /apps/redis/log/sentinel.log #查看主节点日志 37184:X 04 Nov 2022 23:32:07.023 # Configuration loaded 37184:X 04 Nov 2022 23:32:07.023 # systemd supervision requested, but NOTIFY_SOCKET not found 37184:X 04 Nov 2022 23:32:07.024 * Increased maximum number of open files to 10032 (it was originally set to 1024). 37184:X 04 Nov 2022 23:32:07.024 * Running mode=sentinel, port=26379. 37184:X 04 Nov 2022 23:32:07.032 # Sentinel ID is 2f9b5e2cb38fc5b3db19417b9626f0ebcc3a7120 37184:X 04 Nov 2022 23:32:07.032 # +monitor master mymaster 10.0.0.101 6379 quorum 2 37184:X 04 Nov 2022 23:32:07.033 * +slave slave 10.0.0.102:6379 10.0.0.102 6379 @ mymaster 10.0.0.101 6379 37184:X 04 Nov 2022 23:32:07.036 * +slave slave 10.0.0.103:6379 10.0.0.103 6379 @ mymaster 10.0.0.101 6379 37184:X 04 Nov 2022 23:32:07.595 * +sentinel sentinel f505346a3640b4942963b26829e5d99a1fa6691e 10.0.0.102 26379 @ mymaster 10.0.0.101 6379 37184:X 04 Nov 2022 23:32:12.779 * +sentinel sentinel b6aebc495fe5d6e81e57ffd5d4f5bef795b3819a 10.0.0.103 26379 @ mymaster 10.0.0.101 6379 #查看从节点日志 [root@slave1 ~]#tail -f /apps/redis/log/sentinel.log 6376:X 04 Nov 2022 23:31:59.446 # Configuration loaded 6376:X 04 Nov 2022 23:31:59.446 # systemd supervision requested, but NOTIFY_SOCKET not found 6376:X 04 Nov 2022 23:31:59.446 * Increased maximum number of open files to 10032 (it was originally set to 1024). 6376:X 04 Nov 2022 23:31:59.447 * Running mode=sentinel, port=26379. 6376:X 04 Nov 2022 23:31:59.455 # Sentinel ID is f505346a3640b4942963b26829e5d99a1fa6691e 6376:X 04 Nov 2022 23:31:59.455 # +monitor master mymaster 10.0.0.101 6379 quorum 2 6376:X 04 Nov 2022 23:31:59.457 * +slave slave 10.0.0.102:6379 10.0.0.102 6379 @ mymaster 10.0.0.101 6379 6376:X 04 Nov 2022 23:31:59.458 * +slave slave 10.0.0.103:6379 10.0.0.103 6379 @ mymaster 10.0.0.101 6379 6376:X 04 Nov 2022 23:32:08.989 * +sentinel sentinel 2f9b5e2cb38fc5b3db19417b9626f0ebcc3a7120 10.0.0.101 26379 @ mymaster 10.0.0.101 6379 6376:X 04 Nov 2022 23:32:12.716 * +sentinel sentinel b6aebc495fe5d6e81e57ffd5d4f5bef795b3819a 10.0.0.103 26379 @ mymaster 10.0.0.101 6379
#查看从节点日志
[root@slave1 ~]#tail -f /apps/redis/log/sentinel.log 6376:X 04 Nov 2022 23:31:59.446 # Configuration loaded 6376:X 04 Nov 2022 23:31:59.446 # systemd supervision requested, but NOTIFY_SOCKET not found 6376:X 04 Nov 2022 23:31:59.446 * Increased maximum number of open files to 10032 (it was originally set to 1024). 6376:X 04 Nov 2022 23:31:59.447 * Running mode=sentinel, port=26379. 6376:X 04 Nov 2022 23:31:59.455 # Sentinel ID is f505346a3640b4942963b26829e5d99a1fa6691e 6376:X 04 Nov 2022 23:31:59.455 # +monitor master mymaster 10.0.0.101 6379 quorum 2 6376:X 04 Nov 2022 23:31:59.457 * +slave slave 10.0.0.102:6379 10.0.0.102 6379 @ mymaster 10.0.0.101 6379 6376:X 04 Nov 2022 23:31:59.458 * +slave slave 10.0.0.103:6379 10.0.0.103 6379 @ mymaster 10.0.0.101 6379 6376:X 04 Nov 2022 23:32:08.989 * +sentinel sentinel 2f9b5e2cb38fc5b3db19417b9626f0ebcc3a7120 10.0.0.101 26379 @ mymaster 10.0.0.101 6379 6376:X 04 Nov 2022 23:32:12.716 * +sentinel sentinel b6aebc495fe5d6e81e57ffd5d4f5bef795b3819a 10.0.0.103 26379 @ mymaster 10.0.0.101 6379
1.3.5、当前sentinel状态
[root@slave1 ~]#redis-cli -p 26379 127.0.0.1:26379> INFO sentinel # Sentinel sentinel_masters:1 sentinel_tilt:0 sentinel_running_scripts:0 sentinel_scripts_queue_length:0 sentinel_simulate_failure_flags:0 master0:name=mymaster,status=ok,address=10.0.0.101:6379,slaves=2,sentinels=3
1.3.6、验证数据是否同步
[root@master ~]#redis-cli -a 123456 Warning: Using a password with '-a' or '-u' option on the command line interface may not be safe. 127.0.0.1:6379> set k1 v1 OK 127.0.0.1:6379> set k2 v2 OK [root@slave1 ~]#redis-cli -a 123456 Warning: Using a password with '-a' or '-u' option on the command line interface may not be safe. 127.0.0.1:6379> get k1 "v1" [root@slave2 ~]#redis-cli -a 123456 Warning: Using a password with '-a' or '-u' option on the command line interface may not be safe. 127.0.0.1:6379> get k1 "v1"
1.3.7、制造Redis Master节点故障故障转移并查看其过程
#停掉master节点的redis服务来模拟节点故障 [root@master ~]#killall redis-server #这时候查看日志发现主节点已经变成了10.0.0.102机器 [root@master ~]#tail -f /apps/redis/log/sentinel.log 800:X 06 Nov 2022 14:36:38.502 # -sdown sentinel b6aebc495fe5d6e81e57ffd5d4f5bef795b3819a 10.0.0.103 26379 @ mymaster 10.0.0.101 6379 800:X 06 Nov 2022 14:36:38.604 # -sdown slave 10.0.0.103:6379 10.0.0.103 6379 @ mymaster 10.0.0.101 6379 800:X 06 Nov 2022 15:21:26.435 # +sdown master mymaster 10.0.0.101 6379 800:X 06 Nov 2022 15:21:26.500 # +new-epoch 1 800:X 06 Nov 2022 15:21:26.501 # +vote-for-leader f505346a3640b4942963b26829e5d99a1fa6691e 1 800:X 06 Nov 2022 15:21:27.019 # +config-update-from sentinel f505346a3640b4942963b26829e5d99a1fa6691e 10.0.0.102 26379 @ mymaster 10.0.0.101 6379 800:X 06 Nov 2022 15:21:27.019 # +switch-master mymaster 10.0.0.101 6379 10.0.0.102 6379 800:X 06 Nov 2022 15:21:27.019 * +slave slave 10.0.0.103:6379 10.0.0.103 6379 @ mymaster 10.0.0.102 6379 800:X 06 Nov 2022 15:21:27.019 * +slave slave 10.0.0.101:6379 10.0.0.101 6379 @ mymaster 10.0.0.102 6379 800:X 06 Nov 2022 15:21:30.032 # +sdown slave 10.0.0.101:6379 10.0.0.101 6379 @ mymaster 10.0.0.102 6379 #查看各节点sentinel信息 [root@master ~]#redis-cli -p 26379 127.0.0.1:26379> INFO sentinel # Sentinel sentinel_masters:1 sentinel_tilt:0 sentinel_running_scripts:0 sentinel_scripts_queue_length:0 sentinel_simulate_failure_flags:0 master0:name=mymaster,status=ok,address=10.0.0.102:6379,slaves=2,sentinels=3 #故障转移后的sentinel配置文件会被自动修改 [root@slave1 ~]#grep "^[a-Z]" /apps/redis/etc/redis-sentinel.conf bind 0.0.0.0 port 26379 daemonize no pidfile "/apps/redis/run/redis-sentinel.pid" logfile "/apps/redis/log/sentinel.log" dir "/tmp" sentinel myid f505346a3640b4942963b26829e5d99a1fa6691e sentinel deny-scripts-reconfig yes sentinel monitor mymaster 10.0.0.102 6379 2 #这里发现主节点已经变成10.0.0.102 sentinel down-after-milliseconds mymaster 3000 sentinel auth-pass mymaster 123456 sentinel config-epoch mymaster 1 protected-mode no supervised systemd sentinel leader-epoch mymaster 1 sentinel known-replica mymaster 10.0.0.101 6379 sentinel known-replica mymaster 10.0.0.103 6379 sentinel known-sentinel mymaster 10.0.0.103 26379 b6aebc495fe5d6e81e57ffd5d4f5bef795b3819a sentinel known-sentinel mymaster 10.0.0.101 26379 2f9b5e2cb38fc5b3db19417b9626f0ebcc3a7120 sentinel current-epoch 1 #进入redis查看现在info replication信息 [root@slave1 ~]#redis-cli -a 123456 Warning: Using a password with '-a' or '-u' option on the command line interface may not be safe. 127.0.0.1:6379> info replication # Replication role:master connected_slaves:1 slave0:ip=10.0.0.103,port=6379,state=online,offset=905513,lag=0 master_replid:2824cc99085826d751e848cd7b04c9f4abc398cb master_replid2:488fa34f2c093be4886741a38323dd1a0ecf9e03 master_repl_offset:905648 second_repl_offset:537903 repl_backlog_active:1 repl_backlog_size:1048576 repl_backlog_first_byte_offset:1 repl_backlog_histlen:905648 [root@slave2 ~]#redis-cli -a 123456 Warning: Using a password with '-a' or '-u' option on the command line interface may not be safe . 127.0.0.1:6379> INFO replication # Replication role:slave master_host:10.0.0.102 master_port:6379 master_link_status:up master_last_io_seconds_ago:0 master_sync_in_progress:0 slave_repl_offset:901300 slave_priority:100 slave_read_only:1 connected_slaves:0 master_replid:2824cc99085826d751e848cd7b04c9f4abc398cb master_replid2:488fa34f2c093be4886741a38323dd1a0ecf9e03 master_repl_offset:901300 second_repl_offset:537903 repl_backlog_active:1 repl_backlog_size:1048576 repl_backlog_first_byte_offset:564 repl_backlog_histlen:900737
1.3.8、查看选举新主的过程日志监测
[root@slave2 ~]#tail -f /apps/redis/log/sentinel.log 798:X 06 Nov 2022 15:21:26.509 # +sdown master mymaster 10.0.0.101 6379 798:X 06 Nov 2022 15:21:26.534 # +new-epoch 1 798:X 06 Nov 2022 15:21:26.535 # +vote-for-leader f505346a3640b4942963b26829e5d99a1fa6691e 1 798:X 06 Nov 2022 15:21:26.609 # +odown master mymaster 10.0.0.101 6379 #quorum 3/2 798:X 06 Nov 2022 15:21:26.609 # Next failover delay: I will not start a failover before Sun Nov 6 15:27:27 2022 798:X 06 Nov 2022 15:21:27.053 # +config-update-from sentinel f505346a3640b4942963b26829e5d99a1fa6691e 10.0.0.102 26379 @ mymaster 10.0.0.101 6379 798:X 06 Nov 2022 15:21:27.053 # +switch-master mymaster 10.0.0.101 6379 10.0.0.102 6379 798:X 06 Nov 2022 15:21:27.053 * +slave slave 10.0.0.103:6379 10.0.0.103 6379 @ mymaster 10.0.0.102 6379 798:X 06 Nov 2022 15:21:27.053 * +slave slave 10.0.0.101:6379 10.0.0.101 6379 @ mymaster 10.0.0.102 6379 798:X 06 Nov 2022 15:21:30.094 # +sdown slave 10.0.0.101:6379 10.0.0.101 6379 @ mymaster 10.0.0.102 6379
1.3.9、恢复故障的原master重新加入redis集群
#重新其他原master的redis服务，会发现会自动指向新的master [root@master ~]#systemctl restart redis #在原master上观察状态 [root@master ~]#redis-cli -a 123456 Warning: Using a password with '-a' or '-u' option on the command line interface may not be safe. 127.0.0.1:6379> info replication # Replication role:slave master_host:10.0.0.102 master_port:6379 master_link_status:up master_last_io_seconds_ago:1 master_sync_in_progress:0 slave_repl_offset:942522 slave_priority:100 slave_read_only:1 connected_slaves:0 master_replid:2824cc99085826d751e848cd7b04c9f4abc398cb master_replid2:0000000000000000000000000000000000000000 master_repl_offset:942522 second_repl_offset:-1 repl_backlog_active:1 repl_backlog_size:1048576 repl_backlog_first_byte_offset:936383 repl_backlog_histlen:6140 [root@master ~]#redis-cli -p 26379 127.0.0.1:26379> INFO sentinel # Sentinel sentinel_masters:1 sentinel_tilt:0 sentinel_running_scripts:0 sentinel_scripts_queue_length:0 sentinel_simulate_failure_flags:0 master0:name=mymaster,status=ok,address=10.0.0.102:6379,slaves=2,sentinels=3 #再回到新master节点观察状态 [root@slave1 ~]#redis-cli -a 123456 Warning: Using a password with '-a' or '-u' option on the command line interface may not be safe. 127.0.0.1:6379> info replication # Replication role:master connected_slaves:2 slave0:ip=10.0.0.103,port=6379,state=online,offset=976915,lag=0 slave1:ip=10.0.0.101,port=6379,state=online,offset=977185,lag=0 master_replid:2824cc99085826d751e848cd7b04c9f4abc398cb master_replid2:488fa34f2c093be4886741a38323dd1a0ecf9e03 master_repl_offset:977185 second_repl_offset:537903 repl_backlog_active:1 repl_backlog_size:1048576 repl_backlog_first_byte_offset:1 repl_backlog_histlen:977185 #在新主查看一下日志 [root@slave1 ~]#tail -f /apps/redis/log/sentinel.log 786:X 06 Nov 2022 15:21:27.030 * +slave-reconf-sent slave 10.0.0.103:6379 10.0.0.103 6379 @ mymaster 10.0.0.101 6379 786:X 06 Nov 2022 15:21:27.580 * +slave-reconf-inprog slave 10.0.0.103:6379 10.0.0.103 6379 @ mymaster 10.0.0.101 6379 786:X 06 Nov 2022 15:21:27.639 # -odown master mymaster 10.0.0.101 6379 786:X 06 Nov 2022 15:21:28.621 * +slave-reconf-done slave 10.0.0.103:6379 10.0.0.103 6379 @ mymaster 10.0.0.101 6379 786:X 06 Nov 2022 15:21:28.672 # +failover-end master mymaster 10.0.0.101 6379 786:X 06 Nov 2022 15:21:28.672 # +switch-master mymaster 10.0.0.101 6379 10.0.0.102 6379 786:X 06 Nov 2022 15:21:28.672 * +slave slave 10.0.0.103:6379 10.0.0.103 6379 @ mymaster 10.0.0.102 6379 786:X 06 Nov 2022 15:21:28.672 * +slave slave 10.0.0.101:6379 10.0.0.101 6379 @ mymaster 10.0.0.102 6379 786:X 06 Nov 2022 15:21:31.738 # +sdown slave 10.0.0.101:6379 10.0.0.101 6379 @ mymaster 10.0.0.102 6379 786:X 06 Nov 2022 15:54:28.253 # -sdown slave 10.0.0.101:6379 10.0.0.101 6379 @ mymaster 10.0.0.102 6379
到此这篇关于redis实现sentinel哨兵架构的文章就介绍到这了,更多相关redis哨兵架构内容请搜索脚本之家以前的文章或继续浏览下面的相关文章希望大家以后多多支持脚本之家！