Linux摄像头UVC驱动第五篇--启动传输之设置摄像头参数

本章主要实现 myuvc_vidioc_streamon()即启动传输 中的摄像头参数设置

向USB摄像头设置参数: 比如使用哪个format, 使用这个format下的哪个frame(分辨率)，参考UVC驱动，实现向USB摄像头设置参数的功能，分为如下三部分：

• 步骤一：myuvc_try_streaming_params() ; 测试参数
  说明：测试参数，代码中只是测试设置了某几个参数，并没有将全部的参数都测试一遍，发给USB设备之后，USB设备发现可以接收，他就会补齐其他的参数

• 步骤二：myuvc_get_streaming_params():获取参数
  说明：步骤一中已经由USB摄像头补充了其余的参数，此处直接获取参数。

• 步骤三：myuvc_set_streaming_params():设置参数
  说明：将步骤二中获取的参数重新设置到USB摄像头

• 步骤四： 设置 VideoStreaming Interface所使用的 setting
  说明：每个 usb interface里面有多个设置(setting)，那么我们使用哪一个设置呢？我们根据端点能传输的最大带宽容量来选择 setting。

• 4.1 首先 从 myuvc_params 确定带宽，即从 struct myuvc_streaming_control 信息结构体中确认dwMaxPayloadTransferSize。是1024

• 4.2 再根据 setting 的 endpoint端点 能传输的 wMaxPacketSize最大包 找到能满足该带宽的 setting ，即 lsusb -v -d deviceid 查看能满足dwMaxPayloadTransferSize=1024的是哪一个设置，可知

   Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       8
      bNumEndpoints           1
      bInterfaceClass        14 Video
      bInterfaceSubClass      2 Video Streaming
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            5
          Transfer Type            Isochronous
          Synch Type               Asynchronous
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               1
  

即

     * wMaxPacketSize     0x0400  1x 1024 bytes
     * bAlternateSetting       8

即第八个设置。

myuvc_try_streaming_params() /myuvc_get_streaming_params()/myuvc_set_streaming_params()
三个函数中，都是通过发起一个usb传输 usb_control_msg() 来测试、获取、设置参数。都是仿照UVC驱动。

其中 myuvc_get_streaming_params() 首先通过 usb_control_msg() 发起一个USB传输(注意参数，GET_CUR 代表获取当前信息传输标志，VS_PROBE_CONTROL代表 枚举参数)来获取参数信息，存储在 一个data缓存空间中，再存储到一个 struct myuvc_streaming_control 信息结构体中。

其中 myuvc_try_streaming_params() 首先 设置 struct myuvc_streaming_control 信息结构体中的某些信息，再由 usb_control_msg() 发起一个USB传输(注意参数，SET_CUR 代表设置当前信息传输标志，由于并不是真的设置参数，只是测试参数，故 仍然设置 VS_PROBE_CONTROL 代表 枚举参数)

其中 myuvc_set_streaming_params() 直接发一个usb传输 usb_control_msg() 简单的将 获取到的参数 重新设置给usb摄像头，注意 usb_control_msg() 参数 VS_COMMIT_CONTROL类型，提交参数。

---

#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 

#include 
#include 
#include 

#include "uvcvideo.h"

/* 参考 drivers/media/video/uvc */

#define MYUVC_URBS 5

/* Values for bmHeaderInfo (Video and Still Image Payload Headers, 2.4.3.3) */
#define UVC_STREAM_EOH	(1 << 7)
#define UVC_STREAM_ERR	(1 << 6)
#define UVC_STREAM_STI	(1 << 5)
#define UVC_STREAM_RES	(1 << 4)
#define UVC_STREAM_SCR	(1 << 3)
#define UVC_STREAM_PTS	(1 << 2)
#define UVC_STREAM_EOF	(1 << 1)
#define UVC_STREAM_FID	(1 << 0)

/* camera 设置信息结构体*/
struct myuvc_streaming_control {
	__u16 bmHint;
	__u8  bFormatIndex;
	__u8  bFrameIndex;
	__u32 dwFrameInterval;
	__u16 wKeyFrameRate;
	__u16 wPFrameRate;
	__u16 wCompQuality;
	__u16 wCompWindowSize;
	__u16 wDelay;
	__u32 dwMaxVideoFrameSize;
	__u32 dwMaxPayloadTransferSize;
	__u32 dwClockFrequency;
	__u8  bmFramingInfo;
	__u8  bPreferedVersion;
	__u8  bMinVersion;
	__u8  bMaxVersion;
};



struct frame_desc {
    int width;
    int height;
};

/* 参考uvc_video_queue定义一些结构体 */
struct myuvc_buffer {    
    struct v4l2_buffer buf;
    int state;
    int vma_use_count; /* 表示是否已经被mmap */
    wait_queue_head_t wait;  /* APP要读某个缓冲区,如果无数据,在此休眠 */
	struct list_head stream;
	struct list_head irq;    
};

struct myuvc_queue {
    void *mem;
    int count;
    int buf_size;    
    struct myuvc_buffer buffer[32];

	struct urb *urb[32];
	char *urb_buffer[32];
	dma_addr_t urb_dma[32];
	unsigned int urb_size;

	struct list_head mainqueue;   /* 供APP消费用 */
	struct list_head irqqueue;    /* 供底层驱动生产用 */
};

static struct myuvc_queue myuvc_queue;

static struct video_device *myuvc_vdev;
static struct usb_device *myuvc_udev;
static int myuvc_bEndpointAddress = 0x81;
static int myuvc_streaming_intf;
static int myuvc_control_intf;
static int myuvc_streaming_bAlternateSetting = 8;
static struct v4l2_format myuvc_format;

static struct frame_desc frames[] = {{640, 480}, {352, 288}, {320, 240}, {176, 144}, {160, 120}};
static int frame_idx = 1;
static int bBitsPerPixel = 16; /* lsusb -v -d 0x1e4e:  "bBitsPerPixel" */
static int uvc_version = 0x0100; /* lsusb -v -d 0x1e4e: bcdUVC */

static int wMaxPacketSize = 1024;
static int ProcessingUnitID = 3;

static struct myuvc_streaming_control myuvc_params;


/* A2 参考 uvc_v4l2_do_ioctl */
static int myuvc_vidioc_querycap(struct file *file, void  *priv,
					struct v4l2_capability *cap)
{    
    memset(cap, 0, sizeof *cap);
    strcpy(cap->driver, "myuvc");
    strcpy(cap->card, "myuvc");
    cap->version = 1;
    
    cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
 
	return 0;
}

/* A3 列举支持哪种格式
 * 参考: uvc_fmts 数组
 */
static int myuvc_vidioc_enum_fmt_vid_cap(struct file *file, void  *priv,
					struct v4l2_fmtdesc *f)
{
    /* 人工查看描述符可知我们用的摄像头只支持1种格式 */
	if (f->index >= 1)
		return -EINVAL;

    /* 支持什么格式呢?
     * 查看VideoStreaming Interface的描述符,
     * 得到GUID为"59 55 59 32 00 00 10 00 80 00 00 aa 00 38 9b 71"
     */
	strcpy(f->description, "4:2:2, packed, YUYV");
	f->pixelformat = V4L2_PIX_FMT_YUYV;    
    
	return 0;
}

/* A4 返回当前所使用的格式 */
static int myuvc_vidioc_g_fmt_vid_cap(struct file *file, void *priv,
					struct v4l2_format *f)
{
    memcpy(f, &myuvc_format, sizeof(myuvc_format));
	return (0);
}

/* A5 测试驱动程序是否支持某种格式, 强制设置该格式 
 * 参考: uvc_v4l2_try_format
 *       myvivi_vidioc_try_fmt_vid_cap
 */
static int myuvc_vidioc_try_fmt_vid_cap(struct file *file, void *priv,
			struct v4l2_format *f)
{
    if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
    {
        return -EINVAL;
    }

    if (f->fmt.pix.pixelformat != V4L2_PIX_FMT_YUYV)
        return -EINVAL;
    
    /* 调整format的width, height, 
     * 计算bytesperline, sizeimage
     */

    /* 人工查看描述符, 确定支持哪几种分辨率 */
    f->fmt.pix.width  = frames[frame_idx].width;
    f->fmt.pix.height = frames[frame_idx].height;
    
	f->fmt.pix.bytesperline =
		(f->fmt.pix.width * bBitsPerPixel) >> 3;
	f->fmt.pix.sizeimage =
		f->fmt.pix.height * f->fmt.pix.bytesperline;
    
    return 0;
}

/* A6 参考 myvivi_vidioc_s_fmt_vid_cap */
static int myuvc_vidioc_s_fmt_vid_cap(struct file *file, void *priv,
					struct v4l2_format *f)
{
	int ret = myuvc_vidioc_try_fmt_vid_cap(file, NULL, f);
	if (ret < 0)
		return ret;

    memcpy(&myuvc_format, f, sizeof(myuvc_format));
    
    return 0;
}

static int myuvc_free_buffers(void)
{
    if (myuvc_queue.mem)
    {
        vfree(myuvc_queue.mem);
        memset(&myuvc_queue, 0, sizeof(myuvc_queue));
        myuvc_queue.mem = NULL;
    }
    return 0;
}

/* A7 APP调用该ioctl让驱动程序分配若干个缓存, APP将从这些缓存中读到视频数据 
 * 参考: uvc_alloc_buffers
 */
static int myuvc_vidioc_reqbufs(struct file *file, void *priv,
			  struct v4l2_requestbuffers *p)
{
    int nbuffers = p->count;
    int bufsize  = PAGE_ALIGN(myuvc_format.fmt.pix.sizeimage);
    unsigned int i;
    void *mem = NULL;
    int ret;

    if ((ret = myuvc_free_buffers()) < 0)
        goto done;

    /* Bail out if no buffers should be allocated. */
    if (nbuffers == 0)
        goto done;

    /* Decrement the number of buffers until allocation succeeds. */
    for (; nbuffers > 0; --nbuffers) {
        mem = vmalloc_32(nbuffers * bufsize);
        if (mem != NULL)
            break;
    }

    if (mem == NULL) {
        ret = -ENOMEM;
        goto done;
    }

    /* 这些缓存是一次性作为一个整体来分配的 */
    memset(&myuvc_queue, 0, sizeof(myuvc_queue));

	INIT_LIST_HEAD(&myuvc_queue.mainqueue);
	INIT_LIST_HEAD(&myuvc_queue.irqqueue);

    for (i = 0; i < nbuffers; ++i) {
        myuvc_queue.buffer[i].buf.index = i;
        myuvc_queue.buffer[i].buf.m.offset = i * bufsize;
        myuvc_queue.buffer[i].buf.length = myuvc_format.fmt.pix.sizeimage;
        myuvc_queue.buffer[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
        myuvc_queue.buffer[i].buf.sequence = 0;
        myuvc_queue.buffer[i].buf.field = V4L2_FIELD_NONE;
        myuvc_queue.buffer[i].buf.memory = V4L2_MEMORY_MMAP;
        myuvc_queue.buffer[i].buf.flags = 0;
        myuvc_queue.buffer[i].state     = VIDEOBUF_IDLE;
        init_waitqueue_head(&myuvc_queue.buffer[i].wait);
    }

    myuvc_queue.mem = mem;
    myuvc_queue.count = nbuffers;
    myuvc_queue.buf_size = bufsize;
    ret = nbuffers;

done:
    return ret;
}

/* A8 查询缓存状态, 比如地址信息(APP可以用mmap进行映射) 
 * 参考 uvc_query_buffer
 */
static int myuvc_vidioc_querybuf(struct file *file, void *priv, struct v4l2_buffer *v4l2_buf)
{
    int ret = 0;
    
	if (v4l2_buf->index >= myuvc_queue.count) {
		ret = -EINVAL;
		goto done;
	}

    memcpy(v4l2_buf, &myuvc_queue.buffer[v4l2_buf->index].buf, sizeof(*v4l2_buf));

    /* 更新flags */
	if (myuvc_queue.buffer[v4l2_buf->index].vma_use_count)
		v4l2_buf->flags |= V4L2_BUF_FLAG_MAPPED;


	switch (myuvc_queue.buffer[v4l2_buf->index].state) {
    	case VIDEOBUF_ERROR:
    	case VIDEOBUF_DONE:
    		v4l2_buf->flags |= V4L2_BUF_FLAG_DONE;
    		break;
    	case VIDEOBUF_QUEUED:
    	case VIDEOBUF_ACTIVE:
    		v4l2_buf->flags |= V4L2_BUF_FLAG_QUEUED;
    		break;
    	case VIDEOBUF_IDLE:
    	default:
    		break;
	}

done:    
	return ret;
}

/* A10 把缓冲区放入队列, 底层的硬件操作函数将会把数据放入这个队列的缓存 
 * 参考: uvc_queue_buffer
 */
static int myuvc_vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *v4l2_buf)
{
    struct myuvc_buffer *buf;

    /* 0. APP传入的v4l2_buf可能有问题, 要做判断 */

	if (v4l2_buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
	    v4l2_buf->memory != V4L2_MEMORY_MMAP) {
		return -EINVAL;
	}

	if (v4l2_buf->index >= myuvc_queue.count) {
		return -EINVAL;
	}

    buf = &myuvc_queue.buffer[v4l2_buf->index];

	if (buf->state != VIDEOBUF_IDLE) {
		return -EINVAL;
	}


    /* 1. 修改状态 */
	buf->state = VIDEOBUF_QUEUED;
	buf->buf.bytesused = 0;

    /* 2. 放入2个队列 */
    /* 队列1: 供APP使用 
     * 当缓冲区没有数据时,放入mainqueue队列
     * 当缓冲区有数据时, APP从mainqueue队列中取出
     */
	list_add_tail(&buf->stream, &myuvc_queue.mainqueue);

    /* 队列2: 供产生数据的函数使用
     * 当采集到数据时,从irqqueue队列中取出第1个缓冲区,存入数据
     */
	list_add_tail(&buf->irq, &myuvc_queue.irqqueue);
    
	return 0;
}

/*打印当前参数信息*/
static void myuvc_print_streaming_params(struct myuvc_streaming_control *ctrl)
{
    printk("video params:\n");
    printk("bmHint                   = %d\n", ctrl->bmHint);
    printk("bFormatIndex             = %d\n", ctrl->bFormatIndex);
    printk("bFrameIndex              = %d\n", ctrl->bFrameIndex);
    printk("dwFrameInterval          = %d\n", ctrl->dwFrameInterval);
    printk("wKeyFrameRate            = %d\n", ctrl->wKeyFrameRate);
    printk("wPFrameRate              = %d\n", ctrl->wPFrameRate);
    printk("wCompQuality             = %d\n", ctrl->wCompQuality);
    printk("wCompWindowSize          = %d\n", ctrl->wCompWindowSize);
    printk("wDelay                   = %d\n", ctrl->wDelay);
    printk("dwMaxVideoFrameSize      = %d\n", ctrl->dwMaxVideoFrameSize);
    printk("dwMaxPayloadTransferSize = %d\n", ctrl->dwMaxPayloadTransferSize);
    printk("dwClockFrequency         = %d\n", ctrl->dwClockFrequency);
    printk("bmFramingInfo            = %d\n", ctrl->bmFramingInfo);
    printk("bPreferedVersion         = %d\n", ctrl->bPreferedVersion);
    printk("bMinVersion              = %d\n", ctrl->bMinVersion);
    printk("bMinVersion              = %d\n", ctrl->bMinVersion);
}


/*  获得当前特定摄像头参数，但是参数是不正确的，需要后面修改，然后重新设置
	参考: uvc_get_video_ctrl 
 (ret = uvc_get_video_ctrl(video, probe, 1, GET_CUR)) 
 static int uvc_get_video_ctrl(struct uvc_video_device *video,
     struct uvc_streaming_control *ctrl, int probe, __u8 query)
 */
static int myuvc_get_streaming_params(struct myuvc_streaming_control *ctrl)
{
	__u8 *data;
	__u16 size;
	int ret;
	__u8 type = USB_TYPE_CLASS | USB_RECIP_INTERFACE;
	unsigned int pipe;

	/* UVC 版本 */
	size = uvc_version >= 0x0110 ? 34 : 26; //具体操作仿照原生代码  34 26为分配的字节数
	data = kmalloc(size, GFP_KERNEL); //分配缓存空间
	if (data == NULL)
		return -ENOMEM;
   
   /* 发起USB传输  全部参考UVC框架 */
   /*
   usb 传输端点 管道  GET_CUR：0x81 对比源码猜测是获取当前信息，GET_CUR & 0x80 为真,
   选择 usb_rcvctrlpipe(myuvc_udev, 0)， 属于 rcv 类型 ，即接受类型。 0 代表端点0，
   我们的这些参数都是从端点0获得的。
	*/
	pipe = (GET_CUR & 0x80) ? usb_rcvctrlpipe(myuvc_udev, 0)
			      : usb_sndctrlpipe(myuvc_udev, 0);
				  
	//数据传输放方向 USB_DIR_IN
	type |= (GET_CUR & 0x80) ? USB_DIR_IN : USB_DIR_OUT;

	/*
	GET_CUR:获取当前信息，
	VS_PROBE_CONTROL ：枚举参数
	myuvc_streaming_intf ： usb 摄像头有两个Interface : VC  VS。这些参数是在VS中的 所以选择VS
	*/
	//发起一个USB传输  获取 GET_CUR 当前所使用的参数，存储在data里面。
	ret = usb_control_msg(myuvc_udev, pipe, GET_CUR, type, VS_PROBE_CONTROL << 8,
			0 << 8 | myuvc_streaming_intf, data, size, 5000);

    if (ret < 0)
        goto done;
	
	//将存储在 data 中的当前参数信息 存储到 myuvc_streaming_control的各个对应项中。

	ctrl->bmHint = le16_to_cpup((__le16 *)&data[0]);
	ctrl->bFormatIndex = data[2];
	ctrl->bFrameIndex = data[3];
	ctrl->dwFrameInterval = le32_to_cpup((__le32 *)&data[4]);
	ctrl->wKeyFrameRate = le16_to_cpup((__le16 *)&data[8]);
	ctrl->wPFrameRate = le16_to_cpup((__le16 *)&data[10]);
	ctrl->wCompQuality = le16_to_cpup((__le16 *)&data[12]);
	ctrl->wCompWindowSize = le16_to_cpup((__le16 *)&data[14]);
	ctrl->wDelay = le16_to_cpup((__le16 *)&data[16]);
	ctrl->dwMaxVideoFrameSize = get_unaligned_le32(&data[18]);
	ctrl->dwMaxPayloadTransferSize = get_unaligned_le32(&data[22]);

	if (size == 34) {
		ctrl->dwClockFrequency = get_unaligned_le32(&data[26]);
		ctrl->bmFramingInfo = data[30];
		ctrl->bPreferedVersion = data[31];
		ctrl->bMinVersion = data[32];
		ctrl->bMaxVersion = data[33];
	} else {
		//ctrl->dwClockFrequency = video->dev->clock_frequency;
		ctrl->bmFramingInfo = 0;
		ctrl->bPreferedVersion = 0;
		ctrl->bMinVersion = 0;
		ctrl->bMaxVersion = 0;
	}

done:
    kfree(data); //释放data
    
    return (ret < 0) ? ret : 0;
}

/* 参考: uvc_v4l2_try_format ∕uvc_probe_video 
 *       uvc_set_video_ctrl(video, probe, 1)
 */
static int myuvc_try_streaming_params(struct myuvc_streaming_control *ctrl)
{
    __u8 *data;
    __u16 size;
    int ret;
	__u8 type = USB_TYPE_CLASS | USB_RECIP_INTERFACE;
	unsigned int pipe;
    
	memset(ctrl, 0, sizeof *ctrl);//清零
    
	/*可以查找 uvc 规范*/
	
	/*
	ctrl->bmHint = 1; ==> dwFrameInterval 表示此处是协商过程，表示我们设置一些参数发给摄像头，摄像头测试这些参数能不能用，如果能用,我们将
	这些参数用不同的命令发给摄像头。接受新参数，并且工作于新参数之下
	
	ctrl->bFormatIndex = 1; 目前只支持一种格式 选择1
	ctrl->bFrameIndex  = frame_idx + 1; 使用那一种分辨率，我们的驱动分辨率固定是 {352, 288} 所以为 frame_idx + 1;
	ctrl->dwFrameInterval = 333333; 最小帧间隔，每一帧之间的时间间隔 单位是100ns  ，lsusb 为 333333 ，那么一秒： 1000000000ns/（333333*100ns）=30,即
		一秒 30帧
	*/
	ctrl->bmHint = 1;	
	ctrl->bFormatIndex = 1;
	ctrl->bFrameIndex  = frame_idx + 1;
	ctrl->dwFrameInterval = 333333;

//发出usb传输方式 和 myuvc_get_streaming_params()大致一致，只是传输表示从  GET_CUR 变成 SET_CUR，
    size = uvc_version >= 0x0110 ? 34 : 26;
    data = kzalloc(size, GFP_KERNEL);
    if (data == NULL)
        return -ENOMEM;

    *(__le16 *)&data[0] = cpu_to_le16(ctrl->bmHint);
    data[2] = ctrl->bFormatIndex;
    data[3] = ctrl->bFrameIndex;
    *(__le32 *)&data[4] = cpu_to_le32(ctrl->dwFrameInterval);
    *(__le16 *)&data[8] = cpu_to_le16(ctrl->wKeyFrameRate);
    *(__le16 *)&data[10] = cpu_to_le16(ctrl->wPFrameRate);
    *(__le16 *)&data[12] = cpu_to_le16(ctrl->wCompQuality);
    *(__le16 *)&data[14] = cpu_to_le16(ctrl->wCompWindowSize);
    *(__le16 *)&data[16] = cpu_to_le16(ctrl->wDelay);
    put_unaligned_le32(ctrl->dwMaxVideoFrameSize, &data[18]);
    put_unaligned_le32(ctrl->dwMaxPayloadTransferSize, &data[22]);

    if (size == 34) {
        put_unaligned_le32(ctrl->dwClockFrequency, &data[26]);
        data[30] = ctrl->bmFramingInfo;
        data[31] = ctrl->bPreferedVersion;
        data[32] = ctrl->bMinVersion;
        data[33] = ctrl->bMaxVersion;
    }

    pipe = (SET_CUR & 0x80) ? usb_rcvctrlpipe(myuvc_udev, 0)
                  : usb_sndctrlpipe(myuvc_udev, 0);
    type |= (SET_CUR & 0x80) ? USB_DIR_IN : USB_DIR_OUT;

	//发起一个USB传输，用于测试 设置 参数，所以选择为 SET_CUR，但是并不是真的设置参数，只是测试，所以选择 VS_PROBE_CONTROL(枚举)，而并非(VS_COMMIT_CONTROL)提交。
    //真正设置参数的时候 一定要改成 VS_COMMIT_CONTROL
	ret = usb_control_msg(myuvc_udev, pipe, SET_CUR, type, VS_PROBE_CONTROL << 8,
            0 << 8 | myuvc_streaming_intf, data, size, 5000);

    kfree(data);
    
    return (ret < 0) ? ret : 0;
    
}


/*  设置参数
	参考: uvc_v4l2_try_format ∕uvc_probe_video 
 *       uvc_set_video_ctrl(video, probe, 1)
 */
static int myuvc_set_streaming_params(struct myuvc_streaming_control *ctrl)
{
    __u8 *data;
    __u16 size;
    int ret;
	__u8 type = USB_TYPE_CLASS | USB_RECIP_INTERFACE;
	unsigned int pipe;
    
    size = uvc_version >= 0x0110 ? 34 : 26;
    data = kzalloc(size, GFP_KERNEL);
    if (data == NULL)
        return -ENOMEM;

    *(__le16 *)&data[0] = cpu_to_le16(ctrl->bmHint);
    data[2] = ctrl->bFormatIndex;
    data[3] = ctrl->bFrameIndex;
    *(__le32 *)&data[4] = cpu_to_le32(ctrl->dwFrameInterval);
    *(__le16 *)&data[8] = cpu_to_le16(ctrl->wKeyFrameRate);
    *(__le16 *)&data[10] = cpu_to_le16(ctrl->wPFrameRate);
    *(__le16 *)&data[12] = cpu_to_le16(ctrl->wCompQuality);
    *(__le16 *)&data[14] = cpu_to_le16(ctrl->wCompWindowSize);
    *(__le16 *)&data[16] = cpu_to_le16(ctrl->wDelay);
    put_unaligned_le32(ctrl->dwMaxVideoFrameSize, &data[18]);
    put_unaligned_le32(ctrl->dwMaxPayloadTransferSize, &data[22]);

    if (size == 34) {
        put_unaligned_le32(ctrl->dwClockFrequency, &data[26]);
        data[30] = ctrl->bmFramingInfo;
        data[31] = ctrl->bPreferedVersion;
        data[32] = ctrl->bMinVersion;
        data[33] = ctrl->bMaxVersion;
    }

    pipe = (SET_CUR & 0x80) ? usb_rcvctrlpipe(myuvc_udev, 0)
                  : usb_sndctrlpipe(myuvc_udev, 0);
    type |= (SET_CUR & 0x80) ? USB_DIR_IN : USB_DIR_OUT;

	//发起一个usb传输，VS_COMMIT_CONTROL类型，提交参数
    ret = usb_control_msg(myuvc_udev, pipe, SET_CUR, type, VS_COMMIT_CONTROL << 8,
            0 << 8 | myuvc_streaming_intf, data, size, 5000);

    kfree(data);
    
    return (ret < 0) ? ret : 0;
    
}

static void myuvc_uninit_urbs(void)
{
    int i;
    for (i = 0; i < MYUVC_URBS; ++i) {
        if (myuvc_queue.urb_buffer[i])
        {
            usb_buffer_free(myuvc_udev, myuvc_queue.urb_size, myuvc_queue.urb_buffer[i], myuvc_queue.urb_dma[i]);
            myuvc_queue.urb_buffer[i] = NULL;
        }

        if (myuvc_queue.urb[i])
        {
            usb_free_urb(myuvc_queue.urb[i]);
            myuvc_queue.urb[i] = NULL;
        }
    }
}

/* 参考: uvc_video_complete / uvc_video_decode_isoc */
static void myuvc_video_complete(struct urb *urb)
{
	u8 *src;
    u8 *dest;
	int ret, i;
    int len;
    int maxlen;
    int nbytes;
    struct myuvc_buffer *buf;
    
	switch (urb->status) {
	case 0:
		break;

	default:
		printk("Non-zero status (%d) in video "
			"completion handler.\n", urb->status);
		return;
	}

    /* 从irqqueue队列中取出第1个缓冲区 */
	if (!list_empty(&myuvc_queue.irqqueue))
	{
		buf = list_first_entry(&myuvc_queue.irqqueue, struct myuvc_buffer, irq);
    

    	for (i = 0; i < urb->number_of_packets; ++i) {
    		if (urb->iso_frame_desc[i].status < 0) {
    			printk("USB isochronous frame "
    				"lost (%d).\n", urb->iso_frame_desc[i].status);
    			continue;
    		}

            src  = urb->transfer_buffer + urb->iso_frame_desc[i].offset;

            dest = myuvc_queue.mem + buf->buf.m.offset + buf->buf.bytesused;

            len = urb->iso_frame_desc[i].actual_length;
            /* 判断数据是否有效 */
            /* URB数据含义:
             * data[0] : 头部长度
             * data[1] : 错误状态
             */
            if (len < 2 || src[0] < 2 || src[0] > len)
                continue;
            
            /* Skip payloads marked with the error bit ("error frames"). */
            if (src[1] & UVC_STREAM_ERR) {
                printk("Dropping payload (error bit set).\n");
                continue;
            }

            /* 除去头部后的数据长度 */
            len -= src[0];

            /* 缓冲区最多还能存多少数据 */
            maxlen = buf->buf.length - buf->buf.bytesused;
            nbytes = min(len, maxlen);

            /* 复制数据 */
            memcpy(dest, src + src[0], nbytes);
            buf->buf.bytesused += nbytes;

            /* 判断一帧数据是否已经全部接收到 */
            if (len > maxlen) {
                buf->state = VIDEOBUF_DONE;
            }
            
            /* Mark the buffer as done if the EOF marker is set. */
            if (src[1] & UVC_STREAM_EOF && buf->buf.bytesused != 0) {
                printk("Frame complete (EOF found).\n");
                if (len == 0)
                    printk("EOF in empty payload.\n");
                buf->state = VIDEOBUF_DONE;
            }

    	}

        /* 当接收完一帧数据, 
         * 从irqqueue中删除这个缓冲区
         * 唤醒等待数据的进程 
         */
        if (buf->state == VIDEOBUF_DONE ||
            buf->state == VIDEOBUF_ERROR)
        {
            list_del(&buf->irq);
            wake_up(&buf->wait);
        }
	}

    /* 再次提交URB */
	if ((ret = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
		printk("Failed to resubmit video URB (%d).\n", ret);
	}
}

/* 参考: uvc_init_video_isoc */
static int myuvc_alloc_init_urbs(void)
{
	u16 psize;
	u32 size;
    int npackets;
    int i;
    int j;

    struct urb *urb;

	psize = wMaxPacketSize; /* 实时传输端点一次能传输的最大字节数 */
	size  = myuvc_params.dwMaxVideoFrameSize;  /* 一帧数据的最大长度 */
    npackets = DIV_ROUND_UP(size, psize);
    if (npackets > 32)
        npackets = 32;

    size = myuvc_queue.urb_size = psize * npackets;
    
    for (i = 0; i < MYUVC_URBS; ++i) {
        /* 1. 分配usb_buffers */
        
        myuvc_queue.urb_buffer[i] = usb_buffer_alloc(
            myuvc_udev, size,
            GFP_KERNEL | __GFP_NOWARN, &myuvc_queue.urb_dma[i]);

        /* 2. 分配urb */
		myuvc_queue.urb[i] = usb_alloc_urb(npackets, GFP_KERNEL);

        if (!myuvc_queue.urb_buffer[i] || !myuvc_queue.urb[i])
        {
            myuvc_uninit_urbs();
            return -ENOMEM;
        }

    }


    /* 3. 设置urb */
    for (i = 0; i < MYUVC_URBS; ++i) {
        urb = myuvc_queue.urb[i];
        
        urb->dev = myuvc_udev;
        urb->context = NULL;
        urb->pipe = usb_rcvisocpipe(myuvc_udev,myuvc_bEndpointAddress);
        urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
        urb->interval = 1;
        urb->transfer_buffer = myuvc_queue.urb_buffer[i];
        urb->transfer_dma = myuvc_queue.urb_dma[i];
        urb->complete = myuvc_video_complete;
        urb->number_of_packets = npackets;
        urb->transfer_buffer_length = size;
        
        for (j = 0; j < npackets; ++j) {
            urb->iso_frame_desc[j].offset = j * psize;
            urb->iso_frame_desc[j].length = psize;
        }
    
    }
    
    return 0;
}

/* A11 启动传输 
 * 参考: uvc_video_enable(video, 1):
 *           uvc_commit_video
 *           uvc_init_video
 */
static int myuvc_vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
{
    int ret;
    
    /* 1. 向USB摄像头设置参数: 比如使用哪个format, 使用这个format下的哪个frame(分辨率) 
     * 参考: uvc_set_video_ctrl / uvc_get_video_ctrl
     * 	1.1 根据结构体 uvc_streaming_control 设置数据包: 可以手工设置,也可以读出后再修改
     * 	1.2 调用 usb_control_msg 发出数据包
     */

	 /* a b c 步骤逻辑
	 a 步骤 测试参数，代码中只是测试设置了某几个参数，并没有将全部的参数都测试一遍，发给USB设备之后，USB设备发现可以接收，他就会补齐其他的参数
	 b 步骤 所以 就可以 用 myuvc_get_streaming_params()获取补齐后的usb摄像头参数
	 c 步骤 最后调用 myuvc_set_streaming_params() 设置参数
	 */
	 
    /* a. 测试参数 */
    ret = myuvc_try_streaming_params(&myuvc_params);
    printk("myuvc_try_streaming_params ret = %d\n", ret);

    /* b. 取出参数  获得当前特定摄像头参数，但是参数是不正确的，需要后面修改，然后重新设置*/
    ret = myuvc_get_streaming_params(&myuvc_params);
    printk("myuvc_get_streaming_params ret = %d\n", ret);

    /* c. 设置参数 */
    ret = myuvc_set_streaming_params(&myuvc_params);
    printk("myuvc_set_streaming_params ret = %d\n", ret);
    
	//打印当前参数信息
    myuvc_print_streaming_params(&myuvc_params);

	
/*
 每个 usb interface里面有多个设置(setting)，那么我们使用哪一个设置呢？根据端点能传输的最大带宽容量来选择 setting
*/
    /* d. 设置 VideoStreaming Interface所使用的 setting
     * 	d.1 从 myuvc_params 确定带宽
     * 	d.2 根据 setting 的 endpoint端点 能传输的 wMaxPacketSize最大包 找到能满足该带宽的 setting   
     */
    /* 手工确定:
     * bandwidth = myuvc_params.dwMaxPayloadTransferSize = 1024
     * 观察lsusb -v -d 0x1e4e:的结果: 能够满足 dwMaxPayloadTransferSize的是：
     *                wMaxPacketSize     0x0400  1x 1024 bytes
     * 				  bAlternateSetting       8
	   所以 自定义 myuvc_streaming_bAlternateSetting = 8，即选择第八个setting
     */
    usb_set_interface(myuvc_udev, myuvc_streaming_intf, myuvc_streaming_bAlternateSetting);
    
    /* 2. 分配设置URB */
    ret = myuvc_alloc_init_urbs();
    if (ret)
        printk("myuvc_alloc_init_urbs err : ret = %d\n", ret);

    /* 3. 提交URB以接收数据 */
	for (i = 0; i < MYUVC_URBS; ++i) {
		if ((ret = usb_submit_urb(myuvc_queue.urb[i], GFP_KERNEL)) < 0) {
			printk("Failed to submit URB %u (%d).\n", i, ret);
			myuvc_uninit_urbs();
			return ret;
		}
	}
    
	return 0;
}

/* A13 APP通过poll/select确定有数据后, 把缓存从队列中取出来
 * 参考: uvc_dequeue_buffer
 */
static int myuvc_vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *v4l2_buf)
{
    /* APP发现数据就绪后, 从mainqueue里取出这个buffer */

    struct myuvc_buffer *buf;
    int ret = 0;

	if (list_empty(&myuvc_queue.mainqueue)) {
		ret = -EINVAL;
		goto done;
	}
    
	buf = list_first_entry(&myuvc_queue.mainqueue, struct myuvc_buffer, stream);

	switch (buf->state) {
	case VIDEOBUF_ERROR:
		ret = -EIO;
	case VIDEOBUF_DONE:
		buf->state = VIDEOBUF_IDLE;
		break;

	case VIDEOBUF_IDLE:
	case VIDEOBUF_QUEUED:
	case VIDEOBUF_ACTIVE:
	default:
		ret = -EINVAL;
		goto done;
	}

	list_del(&buf->stream);

done:
	return ret;
}

/*
 * A14 之前已经通过mmap映射了缓存, APP可以直接读数据
 * A15 再次调用myuvc_vidioc_qbuf把缓存放入队列
 * A16 poll...
 */

/* A17 停止 
 * 参考 : uvc_video_enable(video, 0)
 */
static int myuvc_vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type t)
{
	struct urb *urb;
	unsigned int i;

    /* 1. kill URB */
	for (i = 0; i < MYUVC_URBS; ++i) {
		if ((urb = myuvc_queue.urb[i]) == NULL)
			continue;
		usb_kill_urb(urb);
	}

    /* 2. free URB */
    myuvc_uninit_urbs();

    /* 3. 设置VideoStreaming Interface为setting 0 */
    usb_set_interface(myuvc_udev, myuvc_streaming_intf, 0);
    
    return 0;
}

    /* Control handling */


/* Extract the bit string specified by mapping->offset and mapping->size
 * from the little-endian data stored at 'data' and return the result as
 * a signed 32bit integer. Sign extension will be performed if the mapping
 * references a signed data type.
 */
static __s32 myuvc_get_le_value(const __u8 *data)
{
    int bits = 16;
    int offset = 0;
    __s32 value = 0;
    __u8 mask;

    data += offset / 8;
    offset &= 7;
    mask = ((1LL << bits) - 1) << offset;

    for (; bits > 0; data++) {
        __u8 byte = *data & mask;
        value |= offset > 0 ? (byte >> offset) : (byte << (-offset));
        bits -= 8 - (offset > 0 ? offset : 0);
        offset -= 8;
        mask = (1 << bits) - 1;
    }

    /* Sign-extend the value if needed. */
    value |= -(value & (1 << (16 - 1)));

    return value;
}

/* Set the bit string specified by mapping->offset and mapping->size
 * in the little-endian data stored at 'data' to the value 'value'.
 */
static void myuvc_set_le_value(__s32 value, __u8 *data)
{
	int bits = 16;
	int offset = 0;
	__u8 mask;

	data += offset / 8;
	offset &= 7;

	for (; bits > 0; data++) {
		mask = ((1LL << bits) - 1) << offset;
		*data = (*data & ~mask) | ((value << offset) & mask);
		value >>= offset ? offset : 8;
		bits -= 8 - offset;
		offset = 0;
	}
}
    


/* 参考:uvc_query_v4l2_ctrl */    
int myuvc_vidioc_queryctrl (struct file *file, void *fh,
                struct v4l2_queryctrl *ctrl)
{
	__u8 type = USB_TYPE_CLASS | USB_RECIP_INTERFACE;
	unsigned int pipe;
    int ret;
    u8 data[2];

    if (ctrl->id != V4L2_CID_BRIGHTNESS)
        return -EINVAL;
    
	memset(ctrl, 0, sizeof *ctrl);
	ctrl->id   = V4L2_CID_BRIGHTNESS;
	ctrl->type = V4L2_CTRL_TYPE_INTEGER;
	strcpy(ctrl->name, "MyUVC_BRIGHTNESS");
	ctrl->flags = 0;

	pipe = usb_rcvctrlpipe(myuvc_udev, 0);
	type |= USB_DIR_IN;

    /* 发起USB传输确定这些值 */
	ret = usb_control_msg(myuvc_udev, pipe, GET_MIN, type, PU_BRIGHTNESS_CONTROL << 8,
			ProcessingUnitID << 8 | myuvc_control_intf, data, 2, 5000);
    if (ret != 2)
        return -EIO;
	ctrl->minimum = myuvc_get_le_value(data);	/* Note signedness */


	ret = usb_control_msg(myuvc_udev, pipe, GET_MAX, type,  PU_BRIGHTNESS_CONTROL << 8,
			ProcessingUnitID << 8 | myuvc_control_intf, data, 2, 5000);
    if (ret != 2)
        return -EIO;
	ctrl->maximum = myuvc_get_le_value(data);	/* Note signedness */

	ret = usb_control_msg(myuvc_udev, pipe, GET_RES, type, PU_BRIGHTNESS_CONTROL << 8,
			 ProcessingUnitID << 8 | myuvc_control_intf, data, 2, 5000);
    if (ret != 2)
        return -EIO;
	ctrl->step = myuvc_get_le_value(data);	/* Note signedness */

	ret = usb_control_msg(myuvc_udev, pipe, GET_DEF, type, PU_BRIGHTNESS_CONTROL << 8,
			ProcessingUnitID << 8 | myuvc_control_intf, data, 2, 5000);
    if (ret != 2)
        return -EIO;
	ctrl->default_value = myuvc_get_le_value(data);	/* Note signedness */

    printk("Brightness: min =%d, max = %d, step = %d, default = %d\n", ctrl->minimum, ctrl->maximum, ctrl->step, ctrl->default_value);
    
    return 0;
}

/* 参考 : uvc_ctrl_get */
int myuvc_vidioc_g_ctrl (struct file *file, void *fh,
                struct v4l2_control *ctrl)
{
	__u8 type = USB_TYPE_CLASS | USB_RECIP_INTERFACE;
	unsigned int pipe;
    int ret;
    u8 data[2];
    
    if (ctrl->id != V4L2_CID_BRIGHTNESS)
        return -EINVAL;

	pipe = usb_rcvctrlpipe(myuvc_udev, 0);
	type |= USB_DIR_IN;

	ret = usb_control_msg(myuvc_udev, pipe, GET_CUR, type, PU_BRIGHTNESS_CONTROL << 8,
			ProcessingUnitID << 8 | myuvc_control_intf, data, 2, 5000);
    if (ret != 2)
        return -EIO;
	ctrl->value = myuvc_get_le_value(data);	/* Note signedness */
    
    return 0;
}

/* 参考: uvc_ctrl_set/uvc_ctrl_commit */
int myuvc_vidioc_s_ctrl (struct file *file, void *fh,
                struct v4l2_control *ctrl)
{
    __u8 type = USB_TYPE_CLASS | USB_RECIP_INTERFACE;
    unsigned int pipe;
    int ret;
    u8 data[2];
    
    if (ctrl->id != V4L2_CID_BRIGHTNESS)
        return -EINVAL;

    myuvc_set_le_value(ctrl->value, data);

    pipe = usb_sndctrlpipe(myuvc_udev, 0);
    type |= USB_DIR_OUT;

    ret = usb_control_msg(myuvc_udev, pipe, SET_CUR, type, PU_BRIGHTNESS_CONTROL << 8,
            ProcessingUnitID  << 8 | myuvc_control_intf, data, 2, 5000);
    if (ret != 2)
        return -EIO;
    
    return 0;
}



static const struct v4l2_ioctl_ops myuvc_ioctl_ops = {
        // 表示它是一个摄像头设备
        .vidioc_querycap      = myuvc_vidioc_querycap,

        /* 用于列举、获得、测试、设置摄像头的数据的格式 */
        .vidioc_enum_fmt_vid_cap  = myuvc_vidioc_enum_fmt_vid_cap,
        .vidioc_g_fmt_vid_cap     = myuvc_vidioc_g_fmt_vid_cap,
        .vidioc_try_fmt_vid_cap   = myuvc_vidioc_try_fmt_vid_cap,
        .vidioc_s_fmt_vid_cap     = myuvc_vidioc_s_fmt_vid_cap,
        
        /* 缓冲区操作: 申请/查询/放入队列/取出队列 */
        .vidioc_reqbufs       = myuvc_vidioc_reqbufs,
        .vidioc_querybuf      = myuvc_vidioc_querybuf,
        .vidioc_qbuf          = myuvc_vidioc_qbuf,
        .vidioc_dqbuf         = myuvc_vidioc_dqbuf,

        /* 查询/获得/设置属性 */
        .vidioc_queryctrl     = myuvc_vidioc_queryctrl,
        .vidioc_g_ctrl        = myuvc_vidioc_g_ctrl,
        .vidioc_s_ctrl        = myuvc_vidioc_s_ctrl,
        
        // 启动/停止
        .vidioc_streamon      = myuvc_vidioc_streamon,
        .vidioc_streamoff     = myuvc_vidioc_streamoff,   
};

/* A1 */
static int myuvc_open(struct file *file)
{
	return 0;
}

static void myuvc_vm_open(struct vm_area_struct *vma)
{
	struct myuvc_buffer *buffer = vma->vm_private_data;
	buffer->vma_use_count++;
}

static void myuvc_vm_close(struct vm_area_struct *vma)
{
	struct myuvc_buffer *buffer = vma->vm_private_data;
	buffer->vma_use_count--;
}

static struct vm_operations_struct myuvc_vm_ops = {
	.open		= myuvc_vm_open,
	.close		= myuvc_vm_close,
};


/* A9 把缓存映射到APP的空间,以后APP就可以直接操作这块缓存 
 * 参考: uvc_v4l2_mmap
 */
static int myuvc_mmap(struct file *file, struct vm_area_struct *vma)
{
    struct myuvc_buffer *buffer;
    struct page *page;
    unsigned long addr, start, size;
    unsigned int i;
    int ret = 0;

    start = vma->vm_start;
    size = vma->vm_end - vma->vm_start;

    /* 应用程序调用mmap函数时, 会传入offset参数
     * 根据这个offset找出指定的缓冲区
     */
    for (i = 0; i < myuvc_queue.count; ++i) {
        buffer = &myuvc_queue.buffer[i];
        if ((buffer->buf.m.offset >> PAGE_SHIFT) == vma->vm_pgoff)
            break;
    }

    if (i == myuvc_queue.count || size != myuvc_queue.buf_size) {
        ret = -EINVAL;
        goto done;
    }

    /*
     * VM_IO marks the area as being an mmaped region for I/O to a
     * device. It also prevents the region from being core dumped.
     */
    vma->vm_flags |= VM_IO;

    /* 根据虚拟地址找到缓冲区对应的page构体 */
    addr = (unsigned long)myuvc_queue.mem + buffer->buf.m.offset;
    while (size > 0) {
        page = vmalloc_to_page((void *)addr);

        /* 把page和APP传入的虚拟地址挂构 */
        if ((ret = vm_insert_page(vma, start, page)) < 0)
            goto done;

        start += PAGE_SIZE;
        addr += PAGE_SIZE;
        size -= PAGE_SIZE;
    }

    vma->vm_ops = &myuvc_vm_ops;
    vma->vm_private_data = buffer;
    myuvc_vm_open(vma);

done:
    return ret;
}

/* A12 APP调用POLL/select来确定缓存是否就绪(有数据) 
 * 参考 : uvc_v4l2_poll
 */
static unsigned int myuvc_poll(struct file *file, struct poll_table_struct *wait)
{
	struct myuvc_buffer *buf;
	unsigned int mask = 0;
    
    /* 从mainqueuq中取出第1个缓冲区 */

    /*判断它的状态, 如果未就绪, 休眠 */

    if (list_empty(&myuvc_queue.mainqueue)) {
        mask |= POLLERR;
        goto done;
    }
    
    buf = list_first_entry(&myuvc_queue.mainqueue, struct myuvc_buffer, stream);

    poll_wait(file, &buf->wait, wait);
    if (buf->state == VIDEOBUF_DONE ||
        buf->state == VIDEOBUF_ERROR)
        mask |= POLLIN | POLLRDNORM;
    
done:
    return mask;
}

/* A18 关闭 */
static int myuvc_close(struct file *file)
{
    
	return 0;
}

static const struct v4l2_file_operations myuvc_fops = {
	.owner		= THIS_MODULE,
    .open       = myuvc_open,
    .release    = myuvc_close,
    .mmap       = myuvc_mmap,
    .ioctl      = video_ioctl2, /* V4L2 ioctl handler */
    .poll       = myuvc_poll,
};

static void myuvc_release(struct video_device *vdev)
{
}


static int myuvc_probe(struct usb_interface *intf,
		     const struct usb_device_id *id)
{
    static int cnt = 0;
	struct usb_device *dev = interface_to_usbdev(intf);

    myuvc_udev = dev;

    printk("myuvc_probe : cnt = %d\n", cnt++);

	/* 确定接口数值 即 VC  VS*/
    if (cnt == 1)//VC 控制接口
    {
        myuvc_control_intf = intf->cur_altsetting->desc.bInterfaceNumber;
    }
    else if (cnt == 2)//VS 流接口
    {
        myuvc_streaming_intf = intf->cur_altsetting->desc.bInterfaceNumber;
    }

    if (cnt == 2)
    {
        /* 1. 分配一个video_device结构体 */
        myuvc_vdev = video_device_alloc();

        /* 2. 设置 */
        /* 2.1 */
        myuvc_vdev->release = myuvc_release;
        
        /* 2.2 */
        myuvc_vdev->fops    = &myuvc_fops;
        
        /* 2.3 */
        myuvc_vdev->ioctl_ops = &myuvc_ioctl_ops;

        /* 3. 注册 */
        video_register_device(myuvc_vdev, VFL_TYPE_GRABBER, -1);
    }
    
    
    return 0;
}

static void myuvc_disconnect(struct usb_interface *intf)
{
    static int cnt = 0;
    printk("myuvc_disconnect : cnt = %d\n", cnt++);

    if (cnt == 2)
    {
        video_unregister_device(myuvc_vdev);
        video_device_release(myuvc_vdev);
    }
    
}

static struct usb_device_id myuvc_ids[] = {
	/* Generic USB Video Class */
	{ USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, 0) },  /* VideoControl Interface */
    { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 2, 0) },  /* VideoStreaming Interface */
	{}
};

/* 1. 分配usb_driver */
/* 2. 设置 */
static struct usb_driver myuvc_driver = {
    .name       = "myuvc",
    .probe      = myuvc_probe,
    .disconnect = myuvc_disconnect,
    .id_table   = myuvc_ids,
};

static int myuvc_init(void)
{
    /* 3. 注册 */
    usb_register(&myuvc_driver);
    return 0;
}

static void myuvc_exit(void)
{
    usb_deregister(&myuvc_driver);
}

module_init(myuvc_init);
module_exit(myuvc_exit);

MODULE_LICENSE("GPL");