RedHat7离线安装docker和nvidia-docker

一、环境

企业生产环境，由于安全性考虑，不能连接外网，给gpu环境搭建带来很大麻烦。因此只能进行离线安装gpu驱动、docker、nvidia-docker等。

环境：RedHat7.5(内核需为3.10+)

[root@localhost ~]# cat /etc/redhat-release
RedHat Linux release 7.5.1804 (Core)

二、GPU驱动安装

1、查看显卡相关信息

[root@localhost ~]# lshw -numeric -C display
  *-display
       description: VGA compatible controller
       product: ASPEED Graphics Family [1A03:2000]
       vendor: ASPEED Technology, Inc. [1A03]
       physical id: 0
       bus info: pci@0000:03:00.0
       version: 41
       width: 32 bits
       clock: 33MHz
       capabilities: pm msi vga_controller bus_master cap_list rom
       configuration: driver=ast latency=0
       resources: irq:17 memory:98000000-9bffffff memory:9c000000-9c01ffff ioport:2000(size=128)
  *-display
       description: 3D controller
       product: GP104GL [Tesla P4] [10DE:1BB3]
       vendor: NVIDIA Corporation [10DE]
       physical id: 0
       bus info: pci@0000:3b:00.0
       version: a1
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list
       configuration: driver=nvidia latency=0
       resources: iomemory:3aff0-3afef iomemory:3aff0-3afef irq:315 memory:b7000000-b7ffffff memory:3affe0000000-3affefffffff memory:3afff0000000-3afff1ffffff
  *-display
       description: 3D controller
       product: GP104GL [Tesla P4] [10DE:1BB3]
       vendor: NVIDIA Corporation [10DE]
       physical id: 0
       bus info: pci@0000:af:00.0
       version: a1
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list
       configuration: driver=nvidia latency=0
       resources: iomemory:3eff0-3efef iomemory:3eff0-3efef irq:318 memory:ed000000-edffffff memory:3effe0000000-3effefffffff memory:3efff0000000-3efff1ffffff

可以看到本机机器包含两张 Tesla P4 显卡

根据显卡信息去 https://www.nvidia.cn/Download/index.aspx?lang=cn 下载显卡驱动 NVIDIA-Linux-x86_64-415.13.run

2、禁用自带的驱动项目nouveau

# 先查看nouveau驱动是否开启(有内容说明未禁用)
lsmod | grep nouveau

修改dist-blacklist.conf文件

vim /lib/modprobe.d/dist-blacklist.conf

注释blacklist nvidiafb
#blacklist nvidiafb

添加下面两句:
blacklist nouveau
options nouveau modeset=0

3、重建initramfs image

#备份一份成bak文件
mv /boot/initramfs-$(uname -r).img /boot/initramfs-$(uname -r).img.bak
#重启镜像
dracut /boot/initramfs-$(uname -r).img $(uname -r)
#修改运行级别为文本模式
systemctl set-default multi-user.target
# 重启服务器
reboot

4、安装kernel-devel、gcc

# 虽然是离线安装，一般完整版系统是具备以下两个包的，如果没有，从https://pkgs.org/下载
yum -y install kernel-devel gcc

5、执行安装文件

chmod u+x NVIDIA-Linux-x86_64-415.13.run
./NVIDIA-Linux-x86_64-375.39.run --kernel-source-path=/usr/src/kernels/3.10.0-862.el7.x86_64

二、离线安装docker

离线环境 yum 一般是不带docker库的；使用 rpm 一般会出现缺包的情况，依赖包特别多，离线环境一般是安装不成功的。离线环境最容易成功的是使用二进制包安装方式，二进制包可以从 Index of linux/static/stable/x86_64/ 下载，docker-18.06.3-ce.tgz 以上版本安装后再去安装 nvidia-docker，会出现缺少 docker-ce 情况，因此最好选用 18.03.x 或 18.06.x 版本。

1、完整卸载原有docker

systemctl stop docker 或 service docker stop
yum remove docker docker-client docker-client-latest docker-common docker-latest docker-latest-logrotate \
	docker-logrotate docker-engine docker-ce docker-ce-cli containerd.io
# 使用 yum -y remove 卸载下行命令列出的内容
yum list installed| grep docker
rm -rf /var/lib/docker
rm -rf /var/lib/containerd
rm -rf /etc/docker
rm -rf /etc/systemd/system/docker.service

2、安装docker

• 下载安装文件 docker-18.06.3-ce.tgz

• 创建安装脚本 install-docker.sh

  #!/bin/sh
  
  usage(){
    echo "Usage: $0 FILE_NAME_DOCKER_CE_TAR_GZ"
    echo "       $0 docker-17.09.0-ce.tgz"
    echo "Get docker-ce binary from: https://download.docker.com/linux/static/stable/x86_64/"
    echo "eg: wget https://download.docker.com/linux/static/stable/x86_64/docker-17.09.0-ce.tgz"
    echo ""
  }
  SYSTEMDDIR=/usr/lib/systemd/system
  SERVICEFILE=docker.service
  DOCKERDIR=/usr/bin
  DOCKERBIN=docker
  SERVICENAME=docker
  
  if [ $# -ne 1 ]; then
    usage
    exit 1
  else
    FILETARGZ="$1"
  fi
  
  if [ ! -f ${FILETARGZ} ]; then
    echo "Docker binary tgz files does not exist, please check it"
    echo "Get docker-ce binary from: https://download.docker.com/linux/static/stable/x86_64/"
    echo "eg: wget https://download.docker.com/linux/static/stable/x86_64/docker-17.09.0-ce.tgz"
    exit 1
  fi
  
  echo "##unzip : tar xvpf ${FILETARGZ}"
  tar xvpf ${FILETARGZ}
  echo
  
  echo "##binary : ${DOCKERBIN} copy to ${DOCKERDIR}"
  cp -p ${DOCKERBIN}/* ${DOCKERDIR} >/dev/null 2>&1
  which ${DOCKERBIN}
  
  echo "##systemd service: ${SERVICEFILE}"
  echo "##docker.service: create docker systemd file"
  cat >${SYSTEMDDIR}/${SERVICEFILE} <

• 执行安装

  chmod +x install-docker.sh
  ./install-docker.sh ./docker-18.06.3-ce.tgz
  

三、离线安装 nvidia-docker2

1、安装 nvidia-docker

为了方便使用，nvidia-docker 的安装包与依赖包已经上传，安装前先进行下载 nvidia-docker2

# 解压后，使用rpm安装
rpm -Uvh *.rpm --nodeps --force

2、修改配置文件

因为 nvidia-docker 随docker一起启动，因此需要修改或新增docker启动配置 /etc/docker/daemon.json

{
    "default-runtime": "nvidia",
    "runtimes": {
        "nvidia": {
            "path": "/usr/bin/nvidia-container-runtime",
            "runtimeArgs": []
        }
    }
}

3、重启docker

systemctl restart docker 或 service docker restart

参考文章

1、Centos7.6离线安装显卡驱动

2、Install Docker Engine on CentOS

3、Index of linux/static/stable/x86_64/

4、解决 RedHat 7.3 环境下离线安装 docker 最新版本的终极办法