CSE 216 – Homework IThis homework document consists of 3 pages. Carefully read the entire document before you start coding.Note: All functions, unless otherwise specified, should be polymorphic (i.e., they should work with anydata type). For example, if you are writing a method that should work for lists, the type must be a list,and not int list.1 Recursion and Higher-order Functions (56 points)In this section, you may not use any functions available in the OCaml library that already solves all or mostof the question. For example, OCaml provides a List.rev function, but you may not use that in this section.1. Write a recursive function pow, which takes two integer parameters x and n, and returns x (5) n. Also write afunction float pow, which does the same thing, but for x being a float. n is still a non-negative integer.2. Write a function compress to remove consecutive duplicates from a list. (5)# compress [a;a;b;c;c;a;a;d;e;e;e];;- : string list = [a; b; c; a; d; e]3. Write a function remove if of the type a list -> (a -> bool) -> a list, which takes a list and (5)a predicate, and removes all the elements that satisfy the condition expressed in the predicate.# remove_if [1;2;3;4;5] (fun x -> x mod 2 = 1);;- : int list = [2; 4]4. Some programming languages (like Python) allow us to quickly slice a list based on two integers i and (5)j, to return the sublist from index i (inclusive) and j (not inclusive). We want such a slicing functionin OCaml as well.Write a function slice as follows: given a list and two indices, i and j, extract the slice of the listcontaining the elements from the ith (inclusive) to the jth (not inclusive) positions in the original list.# slice [a;b;c;d;e;f;g;h] 2 6;;- : string list = [c; d; e; f]Invalid index arguments should be handled gracefully. For example,# slice [a;b;c;d;e;f;g;h] 3 2;;- : string list = []# slice [a;b;c;d;e;f;g;h] 3 20;- : string list = [d;e;f;g;h];You do not, however, need to worry about handling negative indices.5. Write a function equivs of the type (a -> a -> bool) -> a list -> a list list, which par- (6)titions a list into equivalence classes according to the equivalence function.# equivs (=) [1;2;3;4];;- : int list list = [[1];[2];[3];[4]]# equivs (fun x y -> (=) (x mod 2) (y mod 2)) [1; 2; 3; 4; 5; 6; 7; 8];;- : int list list = [[1; 3; 5; 7]; [2; 4; 6; 8]]6. Goldbach’s conjecture states that every positive even number greater than 2 is the sum of two prime (6)numbers. E.g., 18 = 5 + 13, or 42 = 19 + 23. It is one of the most famous conjectures in number theory.It is unproven, but verified for all integers up to 4 × 1018. Write a function goldbachpair : int ->int * int to find two prime numbers that sum up to a given even integer. The returned pair must havea non-decreasing order.1CSE 216 Homework I Submission Deadline: Feb 29, 2020# goldbachpair 10;; (* must return (3, 7) and not (7, 3) *)- : int * int = (3, 7)Note that the decomposition is not always unique. E.g., 10 can be written as 3+7 or as 5+5, so both(3, 7) and (5, 5) are correct answers.7. Write a function called equiv on, which takes three inputs: two functions f and g, and a list lst. It (6)returns true if and only if the functions f and g have identical behavior on every element of lst.# let f i = i * i;;val f : int -> int = # let g i = 3 * i;;val g : int -> int = # equiv_on f g [3];;- : bool = true# equiv_on f g [1;2;3];;- : bool = false8. Write a functions called pairwisefilter with two parameters: (i) a function cmp that compares two (6)elements of a specific T and returns one of them, and (ii) a list lst of elements of that same type T. Itreturns a list that applies cmp while taking two items at a time from lst. If lst has odd size, the lastelement is returned “as is”.# pairwisefilter min [14; 11; 20; 25; 10; 11];;- : int list = [11; 20; 10]# (* assuming that shorter : string * string -> string = already exists *)# pairwisefilter shorter [and; this; makes; shorter; strings; always; win];;- : string list = [and; makes; always; win]9. Write the polynomial function, which takes a list of tuples and returns the polynomial function corre- (6)sponding to that list. Each tuple in the input list consists of (i) the coefficient, and (ii) the exponent.# (* below is the polynomial function f(x) = 3x^3 - 2x + 5 *)# let f = polynomial [3, 3; -2, 1; 5, 0];;val f : int -> int = # f 2;;- : int = 2510. The power set of a set S is the set of all subsets of S (incluCSE 216作业代做、Python程序设计作业调试、代写polymorphic作业、代写Python语言作业 帮做Hading the empty set and the entire set). (6)Write a function powerset of the type a list -> a list list, which treats lists as unordered sets,and returns the powerset of its input list. You may assume that the input list has no duplicates.# powerset [3; 4; 10];;- : int list list = [[]; [3]; [4]; [10]; [3; 4]; [3; 10]; [4; 10]; [3; 4; 10]];2 Data Types (40 points)1. Let us define a language for expressions in Boolean logic: (10)type bool_expr =| Lit of string| Not of bool_expr| And of bool_expr * bool_expr| Or of bool_expr * bool_exprusing which we can write expressions in prefix notation. E.g., (a∧b)∨(¬a) is Or(And(Lit(a), Lit(b)),Not(Lit(a))). Your task is to write a function truth table, which takes as input a logical expressionin two literals and returns its truth table as a list of triples, each a tuple of the form:(truth-value-of-first-literal, truth-value-of-second-literal, truth-value-of-expression)For example,# (* the outermost parentheses are needed for OCaml to parse the third argumentcorrectly as a bool_expr *)# truth_table a b (And(Lit(a), Lit(b)));;- : (bool * bool * bool) list = [(true, true, true); (true, false, false);(false, true, false); (false, false, false)]2CSE 216 Homework I Submission Deadline: Feb 29, 20202. In this question you will use higher-order functions to implement an interpreter for a simple stack-based (30)evaluation language. This language has a fixed set of commands:• start → Initializes an empty stack. This is always the first command in a program and neverappears again.• (push n) → Pushes the specified integer n on to the top of the stack. This command is alwaysparenthesized.• pop → Removes the top element of the stack.• add → Pops the top two elements of the stack, computes their sum, and pushes the result back onto the stack.• mult → Pops the top two elements of the stack, computes their product, and pushes the result backon to the stack.• clone → Pushes a duplicate copy of the top element on to the stack.• kpop → Pops the top element k of the stack, and if k is a positive number, pops k more elements(or the stack becomes empty, whichever happens sooner).• halt → Terminates the stack evaluation program. This is always the last command.Your task is to define the stack data structure in OCaml (10 points), and then implement the abovecommands (20 points). Your stack must be implemented as a list. A complete running example wouldlook something like the following:# start (push 2) (push 3) (push 4) mult add ha<;- : list int = [14]You may assume that only valid commands will be provided. As such, you do not have to worry aboutexception handling.3 Version Control (4 points)For this part, you must use a Bitbucket account with your stonybrook.edu email address. You should alreadyhave one, based on the first recitation task. You must create a repository with the name CSE216HW1on Bitbucket and give access to your grading TA (your grading TA will be allocated based on your last name,and will be announced on Blackboard by the end of this week). Access must be given to your grading TAbefore the homework deadline. Otherwise, this component of the homework will not be graded. We stronglyencourage you to commit and push your code to this remote repository every time you finish solving anyquestion, an even more frequently for the longer questions (e.g., 2.2). Your grading TA will check for thefollowing:- There must be at least 4 distinct code pushes to the remote repository, with each push safely committingthe solution to at least one new solution to a homework question. [2 points]- At least 2 code pushes to the remote repository must be made on separate days. [1 point]- At least 2 code pushes must include meaningul commit messages describing what code has been contributedsince the previous version. [1 point]NOTES:• Late submissions or uncompilable code will not be graded.• Please remember to verify what you are submitting. Make sure you are, indeed, submitting what youthink you are submitting!• What to submit? A single .zip file comprising three .ml files. The first file must be named hw1.ml,and should contain your code for the ten questions in section 1 of this assignment. The second file mustbe named hw1bool.ml, and this should contain your code for question 2.1 (Boolean logic). Finally, thethird file must be named hw1stack.ml, with your code for question 2.2 (stack evaluation language).This assignment will be graded by a script, so be absolutely sure that the submissionfollows this structure (including the name of your remote repository).Submission Deadline: Feb 29, 2020, 11:59 pm3转自：http://www.6daixie.com/contents/3/4959.html
