uv平板打印机对打印环境有那些要求？

uv平板打印机对打印环境有那些要求？

众所周知，uv平板打印机是一款价格不菲的大型机械设备，它是一种高科技的免制版全彩色数码印刷机，不受材料限制，可以在T恤、移门、柜门、推拉门、玻璃、板材、各种标牌、水晶、PVC、亚克力、金属、塑料、石材、皮革等表面进行彩色照片级印刷。It is well known that the uv flat-panel printers of large mechanical equipment is an expensive, it is a kind of high-tech free plate making full color digital printing machine, without being limited by the material, can be in T-shirt, move the door, cupboard door, sliding door, glass, plate, all kinds of signs, crystal, PVC, acrylic, metal, plastic, stone, leather and other surface color photo printing.

uv平板打印机对操作环境有哪些要求？

uv平板打印机对打印环境有那些要求？

无需制版一次印刷完成，色彩靓丽丰富，耐磨损，防紫外线，操作简单方便，印刷图像速度快，完全符合工业印刷标准。下面小编就uv平板打印机对操作环境的要求说明一下。

1、独立、洁净、低尘、少光照、通风良好的工作间

2、环境温度：18C ～ 30C (64F ～ 86F)

3、相对湿度：30% ～ 70% (无冷凝)

一般而言，温度越高，干燥越快，温度越低，干燥越慢。因此，温湿度对于油墨干燥速度有直接的影响，如果温度过低，相对湿度过大，会降低油墨的干燥速度，处长印刷周期。

环境的温度和湿度还会影响到油墨的粘度。环境温度升高，油墨粘度降低；环境温度降低，油墨粘度增加。如果温度过低，油墨粘度过大，会发生印刷故障。www.ht-1688.com Ambient temperature and humidity will also affect the viscosity of the ink. Ambient temperature increases, ink viscosity decreases; Ambient temperature decreases, ink viscosity increases. If the temperature is too low, ink viscosity is too large, will occur printing failure.