查看系统信息
display version
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.130 (AR2200 V200R003C00)
Copyright (C) 2011-2012 HUAWEI TECH CO., LTD
Huawei AR2220 Router uptime is 0 week, 0 day, 0 hour, 9 minutes
BKP 0 version information:
1. PCB Version : AR01BAK2A VER.NC
2. If Supporting PoE : No
3. Board Type : AR2220
4. MPU Slot Quantity : 1
5. LPU Slot Quantity : 6
MPU 0(Master) : uptime is 0 week, 0 day, 0 hour, 9 minutes
MPU version information :
1. PCB Version : AR01SRU2A VER.A
2. MAB Version : 0
3. Board Type : AR2220
4. BootROM Version : 0
设置时间
在用户视图下能对时间进行操作，查看时间
display clock
2018-10-30 11:30:05
Tuesday
Time Zone(local) : UTC+08:00
修改时区
clock timezone local add 08:00:00
修改时间
clock datetime 11:30:00 2018-10-30
修改设备名称
修改设备名称要在系统视图下操作，配置接口、协议等也需要进入系统视图
sys
system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R1
[R1]
配置登录提示信息
配置在用户登录前显示的标题信息，在系统视图下
[R1]header login information "welcome R1"
配置在用户登录后显示的标题信息，在系统视图下
[R1]header shell information "don't reboot the device"
配置consle口参数
设置consle口登录方式为password方式（只输入密码）
[R1]user-interface console 0
[R1-ui-console0]authentication-mode password
Please configure the login password (maximum length 16):123456
[R1-ui-console0]set authentication password cipher 123456
设置consle口登录超时时间
[R1-ui-console0]idle-timeout 20 0
配置接口ip
[ar1]interface GigabitEthernet 0/0/1
[ar1-GigabitEthernet0/0/1]ip address 192.168.100.1 24
[ar1-GigabitEthernet0/0/1]description ?
TEXT<"..."> Interface description (no more than 242 characters)
[ar1-GigabitEthernet0/0/1]description THIS INTERFACE IS TEST
[ar1-GigabitEthernet0/0/1]display this
[V200R003C00]
#
interface GigabitEthernet0/0/1
description THIS INTERFACE IS TEST
ip address 192.168.100.1 255.255.255.0
#
return
查看接口信息
[ar1-GigabitEthernet0/0/1]display interface GigabitEthernet 0/0/1
GigabitEthernet0/0/1 current state : DOWN
Line protocol current state : DOWN
Description:THIS INTERFACE IS TEST
Route Port,The Maximum Transmit Unit is 1500
Internet Address is 192.168.100.1/24
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 00e0-fca1-68bb
Last physical up time : -
Last physical down time : 2018-10-31 10:47:12 UTC-08:00
Current system time: 2018-10-31 11:13:59-08:00
Port Mode: COMMON COPPER
Speed : 1000, Loopback: NONE
Duplex: FULL, Negotiation: ENABLE
Mdi : AUTO
Last 300 seconds input rate 0 bits/sec, 0 packets/sec
Last 300 seconds output rate 0 bits/sec, 0 packets/sec
Input peak rate 0 bits/sec,Record time: -
Output peak rate 0 bits/sec,Record time: -
Input: 0 packets, 0 bytes
Unicast: 0, Multicast: 0
Broadcast: 0, Jumbo: 0
Discard: 0, Total Error: 0
CRC: 0, Giants: 0
Jabbers: 0, Throttles: 0
Runts: 0, Symbols: 0
Ignoreds: 0, Frames: 0
Output: 0 packets, 0 bytes
Unicast: 0, Multicast: 0
Broadcast: 0, Jumbo: 0
Discard: 0, Total Error: 0
Collisions: 0, ExcessiveCollisions: 0
Late Collisions: 0, Deferreds: 0
Input bandwidth utilization threshold : 100.00%
Output bandwidth utilization threshold: 100.00%
Input bandwidth utilization : 0%
Output bandwidth utilization : 0%
dir命令
在用户视图下执行dir命令，查看当前目录下的文件列表
dir
Directory of flash:/
Idx Attr Size(Byte) Date Time(LMT) FileName
0 drw- - Oct 31 2018 03:03:57 dhcp
1 -rw- 121,802 May 26 2014 09:20:58 portalpage.zip
2 -rw- 2,263 Oct 31 2018 03:03:52 statemach.efs
3 -rw- 828,482 May 26 2014 09:20:58 sslvpn.zip
4 -rw- 249 Oct 31 2018 03:25:24 private-data.txt
5 -rw- 609 Oct 31 2018 03:25:23 vrpcfg.zip
1,090,732 KB total (784,456 KB free)
管理配置文件
执行display saved-configuration命令查看保存的配置文件
display saved-configuration
There is no correct configuration file in FLASH
由于当前还没有保存过配置文件，使用save保存当前配置并查看
save
The current configuration will be written to the device.
Are you sure to continue? (y/n)[n]:y
It will take several minutes to save configuration file, please wait.......
Configuration file had been saved successfully
Note: The configuration file will take effect after being activated
dis
display sav
display saved-configuration
[V200R003C00]
#
sysname ar2
#
snmp-agent local-engineid 800007DB03000000000000
snmp-agent
#
clock timezone China-Standard-Time minus 08:00:00
#
portal local-server load portalpage.zip
#
drop illegal-mac alarm
#
set cpu-usage threshold 80 restore 75
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %$%$K8m.Nt84DZ}e#<0`8bmE3Uw}%$%$
local-user admin service-type http
#
firewall zone Local
priority 15
#
interface GigabitEthernet0/0/0
#
interface GigabitEthernet0/0/1
ip address 192.168.100.2 255.255.255.0
#
interface GigabitEthernet0/0/2
#
interface NULL0
#
user-interface con 0
authentication-mode password
set authentication password cipher %$%$pt6"(.Rl4>-%RB6Jc;c7,#MvW%Xm%`N109"Y($':
,KiX#My,%$%$
idle-timeout 20 0
user-interface vty 0 4
user-interface vty 16 20
#
wlan ac
#
return
执行display current-configuration命令查看当前配置信息
display current-configuration
[V200R003C00]
#
sysname ar2
#
snmp-agent local-engineid 800007DB03000000000000
snmp-agent
#
clock timezone China-Standard-Time minus 08:00:00
#
portal local-server load portalpage.zip
#
drop illegal-mac alarm
#
set cpu-usage threshold 80 restore 75
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %$%$K8m.Nt84DZ}e#<0`8bmE3Uw}%$%$
local-user admin service-type http
#
display current-configuration
[V200R003C00]
#
sysname ar2
#
snmp-agent local-engineid 800007DB03000000000000
snmp-agent
#
clock timezone China-Standard-Time minus 08:00:00
#
portal local-server load portalpage.zip
#
drop illegal-mac alarm
#
set cpu-usage threshold 80 restore 75
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %$%$K8m.Nt84DZ}e#<0`8bmE3Uw}%$%$
local-user admin service-type http
#
firewall zone Local
priority 15
#
interface GigabitEthernet0/0/0
#
interface GigabitEthernet0/0/1
ip address 192.168.100.2 255.255.255.0
#
interface GigabitEthernet0/0/2
#
interface NULL0
#
user-interface con 0
authentication-mode password
set authentication password cipher %$%$Jk5Q2gA#/4KWq`'m_:;B,#l%`#U`NoG7E@/3Pz(C
Yos/#l(,%$%$
idle-timeout 20 0
user-interface vty 0 4
user-interface vty 16 20
#
wlan ac
#
return
一台路由器可以存储多个配置文件。执行display startup命令查看下次启动时使用的配置文件。
display startup
MainBoard:
Startup system software: null
Next startup system software: null
Backup system software for next startup: null
Startup saved-configuration file: flash:/vrpcfg.zip
Next startup saved-configuration file: flash:/vrpcfg.zip
Startup license file: null
Next startup license file: null
Startup patch package: null
Next startup patch package: null
Startup voice-files: null
Next startup voice-files: null
删除闪存中的配置文件
reset saved-configuration
This will delete the configuration in the flash memory.
The device configuratio
ns will be erased to reconfigure.
Are you sure? (y/n)[n]:y
Clear the configuration in the device successfully.
dir
Directory of flash:/
Idx Attr Size(Byte) Date Time(LMT) FileName
0 drw- - Oct 31 2018 03:03:57 dhcp
1 -rw- 121,802 May 26 2014 09:20:58 portalpage.zip
2 -rw- 2,263 Oct 31 2018 03:34:54 statemach.efs
3 -rw- 828,482 May 26 2014 09:20:58 sslvpn.zip
4 -rw- 249 Oct 31 2018 03:25:24 private-data.txt
5 -rw- 120 Oct 31 2018 03:34:54 vrpcfg.zip
1,090,732 KB total (784,444 KB free)
dis
display star
display startup
MainBoard:
Startup system software: null
Next startup system software: null
Backup system software for next startup: null
Startup saved-configuration file: null
Next startup saved-configuration file: null
Startup license file: null
Next startup license file: null
Startup patch package: null
Next startup patch package: null
Startup voice-files: null
Next startup voice-files: null
重启设备
reboot
Info: The system is comparing the configuration, please wait.
Warning: All the configuration will be saved to the next startup configuration.
Continue ? [y/n]:y
It will take several minutes to save configuration file, please wait......
Configuration file had been saved successfully
Note: The configuration file will take effect after being activated
System will reboot! Continue ? [y/n]:y
Info: system is rebooting ,please wait...