tyustli

U盘实现——MSC 介绍

文章目录

MSC 介绍
- 代码地址
- 相关缩写
- BOT 传输协议
- - 命令阶段
  - 数据阶段
  - 状态阶段
  - 三个阶段转换流程
  - U 盘枚举过程几个重要的命令介绍
- 附 STM32 U 盘枚举日志

MSC 介绍

代码地址

BOT 传输协议

BOT 即 bulk only transport ，在仅批量传输的结构和过程中，共分成三个阶段：命令阶段，数据阶段和状态阶段。

这和控制传输有点类似，但又不完全相同，这三个阶段均通过批量端点传输数据

命令阶段

命令阶段主要由主机通过批量输出端点发送一个 CBW 的数据，在 CBW 中定义了要操作的命令以及数据传输的方向和数量

CBW 命令格式

数据阶段

数据阶段的方向由命令阶段决定，数据阶段的数据格式也由 CBW 决定

状态阶段

状态阶段总是由设备返回该命令完成的状态即 CSW
CSW 命令格式

三个阶段转换流程

U 盘枚举过程几个重要的命令介绍

BOT 协议中较为重要的几个命令先简单做个介绍，具体命令如下：

INQUIRY Command：0x12
- 查询命令，请求设备的一些基本信息
READD FORMAT CAPACITIES Command：0x23
- 读格式化容量命令，读取设备各种可能的格式化容量
READD CAPACITY Command：0x25
- 读容量命令，读取当前媒介的容量
MODE SENSE Command：0x1A
- 模式查询命令，检测设备是否写保护
TEST UNIT READY Command：0x00
- 单元测试命令，测试设备的某个逻辑单元是否准备好
READ(10) Command：0x28
- 读命令，从磁盘读数据
WRITE(10) Command：0x2A
- 写命令，往磁盘写数据

附 STM32 U 盘枚举日志

USBD init on controller 1
sizeof(usbd_device_t) = 43
sizeof(tu_fifo_t) = 12
sizeof(tu_edpt_stream_t) = 24
MSC init
USBD Bus Reset : Full Speed

USBD Setup Received 80 06 00 01 00 00 40 00 
  Get Descriptor Device
  Queue EP 80 with 18 bytes ...
USBD Xfer Complete on EP 80 with 18 bytes
  Queue EP 00 with 0 bytes ...
USBD Xfer Complete on EP 00 with 0 bytes
USBD Bus Reset : Full Speed

USBD Setup Received 00 05 05 00 00 00 00 00 
  Set Address
USBD Xfer Complete on EP 80 with 0 bytes

USBD Setup Received 80 06 00 01 00 00 12 00 
  Get Descriptor Device
  Queue EP 80 with 18 bytes ...
USBD Xfer Complete on EP 80 with 18 bytes
  Queue EP 00 with 0 bytes ...
USBD Xfer Complete on EP 00 with 0 bytes

USBD Setup Received 80 06 00 02 00 00 FF 00 
  Get Descriptor Configuration[0]
  Queue EP 80 with 32 bytes ...
USBD Xfer Complete on EP 80 with 32 bytes
  Queue EP 00 with 0 bytes ...
USBD Xfer Complete on EP 00 with 0 bytes

USBD Setup Received 80 06 03 03 09 04 FF 00 
  Get Descriptor String[3]
  Queue EP 80 with 26 bytes ...
USBD Xfer Complete on EP 80 with 26 bytes
  Queue EP 00 with 0 bytes ...
USBD Xfer Complete on EP 00 with 0 bytes

USBD Setup Received 80 06 00 03 00 00 FF 00 
  Get Descriptor String[0]
  Queue EP 80 with 4 bytes ...
USBD Xfer Complete on EP 80 with 4 bytes
  Queue EP 00 with 0 bytes ...
USBD Xfer Complete on EP 00 with 0 bytes

USBD Setup Received 80 06 02 03 09 04 FF 00 
  Get Descriptor String[2]
  Queue EP 80 with 30 bytes ...
USBD Xfer Complete on EP 80 with 30 bytes
  Queue EP 00 with 0 bytes ...
USBD Xfer Complete on EP 00 with 0 bytes

USBD Setup Received 80 06 00 06 00 00 0A 00 
  Get Descriptor Device Qualifier
get device qualifier
  Stall EP0
stall ep0

USBD Setup Received 80 06 00 01 00 00 12 00 
  Get Descriptor Device
  Queue EP 80 with 18 bytes ...
USBD Xfer Complete on EP 80 with 18 bytes
  Queue EP 00 with 0 bytes ...
USBD Xfer Complete on EP 00 with 0 bytes

USBD Setup Received 80 06 00 02 00 00 09 00 
  Get Descriptor Configuration[0]
  Queue EP 80 with 9 bytes ...
USBD Xfer Complete on EP 80 with 9 bytes
  Queue EP 00 with 0 bytes ...
USBD Xfer Complete on EP 00 with 0 bytes

USBD Setup Received 80 06 00 02 00 00 20 00 
  Get Descriptor Configuration[0]
  Queue EP 80 with 32 bytes ...
USBD Xfer Complete on EP 80 with 32 bytes
  Queue EP 00 with 0 bytes ...
USBD Xfer Complete on EP 00 with 0 bytes

USBD Setup Received 80 06 00 03 00 00 02 00 
  Get Descriptor String[0]
  Queue EP 80 with 2 bytes ...
USBD Xfer Complete on EP 80 with 2 bytes
  Queue EP 00 with 0 bytes ...
USBD Xfer Complete on EP 00 with 0 bytes

USBD Setup Received 80 06 00 03 00 00 04 00 
  Get Descriptor String[0]
  Queue EP 80 with 4 bytes ...
USBD Xfer Complete on EP 80 with 4 bytes
  Queue EP 00 with 0 bytes ...
USBD Xfer Complete on EP 00 with 0 bytes

USBD Setup Received 80 06 03 03 09 04 02 00 
  Get Descriptor String[3]
  Queue EP 80 with 2 bytes ...
USBD Xfer Complete on EP 80 with 2 bytes
  Queue EP 00 with 0 bytes ...
USBD Xfer Complete on EP 00 with 0 bytes

USBD Setup Received 80 06 03 03 09 04 1A 00 
  Get Descriptor String[3]
  Queue EP 80 with 26 bytes ...
USBD Xfer Complete on EP 80 with 26 bytes
  Queue EP 00 with 0 bytes ...
USBD Xfer Complete on EP 00 with 0 bytes

USBD Setup Received 00 09 01 00 00 00 00 00 
  Set Configuration
  Open EP 01 with Size = 64
  Open EP 81 with Size = 64
    Allocated 64 bytes at offset 3968  Queue EP 01 with 31 bytes ...
  MSC opened
  Bind EP 01 to driver id 0
  Bind EP 81 to driver id 0
  Queue EP 80 with 0 bytes ...
USBD Xfer Complete on EP 80 with 0 bytes

USBD Setup Received A1 FE 00 00 00 00 01 00 
  MSC control request
  MSC Get Max Lun
  Queue EP 80 with 1 bytes ...
USBD Xfer Complete on EP 80 with 1 bytes
  MSC control complete
  Queue EP 00 with 0 bytes ...
USBD Xfer Complete on EP 00 with 0 bytes
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Inquiry
  cbw: 0x55 0x53 0x42 0x43 0x10 0x50 0xd5 0xfb 0x24 0x0 0x0 0x0 0x80 0x0 0x6 0x12 0x0 0x0 0x0 0x24 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 36 bytes ...
USBD Xfer Complete on EP 81 with 36 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x50 0xd5 0xfb 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Inquiry
  cbw: 0x55 0x53 0x42 0x43 0x10 0x50 0xd5 0xfb 0x24 0x0 0x0 0x0 0x80 0x0 0x6 0x12 0x0 0x0 0x0 0x24 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 36 bytes ...
USBD Xfer Complete on EP 81 with 36 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x50 0xd5 0xfb 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Format Capacity
  cbw: 0x55 0x53 0x42 0x43 0x10 0x50 0xd5 0xfb 0xfc 0x0 0x0 0x0 0x80 0x0 0xa 0x23 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0xfc 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 12 bytes ...
USBD Xfer Complete on EP 81 with 12 bytes
  MSC xfer callback
  SCSI Data [Lun0]
    Stall EP 81

USBD Setup Received 02 01 00 00 81 00 00 00 
  Clear Feature
    Clear Stall EP 81
  MSC control request
clear feature
  Queue EP 81 with 13 bytes ...
  Queue EP 80 with 0 bytes ...
USBD Xfer Complete on EP 80 with 0 bytes
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Inquiry
  cbw: 0x55 0x53 0x42 0x43 0x10 0x50 0xd5 0xfb 0xff 0x0 0x0 0x0 0x80 0x0 0x6 0x12 0x1 0x80 0x0 0xff 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 36 bytes ...
USBD Xfer Complete on EP 81 with 36 bytes
  MSC xfer callback
  SCSI Data [Lun0]
    Stall EP 81

USBD Setup Received 02 01 00 00 81 00 00 00 
  Clear Feature
    Clear Stall EP 81
  MSC control request
clear feature
  Queue EP 81 with 13 bytes ...
  Queue EP 80 with 0 bytes ...
USBD Xfer Complete on EP 80 with 0 bytes
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x10 0xf0 0xe2 0xfb 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...

USBD Setup Received 80 06 00 03 00 00 FF 00 
  Get Descriptor String[0]
  Queue EP 80 with 4 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0xf0 0xe2 0xfb 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 80 with 4 bytes
  Queue EP 00 with 0 bytes ...
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 00 with 0 bytes

USBD Setup Received 80 06 01 03 09 04 FF 00 
  Get Descriptor String[1]
  Queue EP 80 with 16 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Mode_Sense 6
  cbw: 0x55 0x53 0x42 0x43 0x10 0x90 0x70 0xf6 0xc0 0x0 0x0 0x0 0x80 0x0 0x6 0x1a 0x0 0x1c 0x0 0xc0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 4 bytes ...
USBD Xfer Complete on EP 80 with 16 bytes
  Queue EP 00 with 0 bytes ...
USBD Xfer Complete on EP 81 with 4 bytes
  MSC xfer callback
  SCSI Data [Lun0]
    Stall EP 81
USBD Xfer Complete on EP 00 with 0 bytes

USBD Setup Received 80 06 02 03 09 04 FF 00 
  Get Descriptor String[2]
  Queue EP 80 with 30 bytes ...
USBD Xfer Complete on EP 80 with 30 bytes
  Queue EP 00 with 0 bytes ...
USBD Xfer Complete on EP 00 with 0 bytes

USBD Setup Received 02 01 00 00 81 00 00 00 
  Clear Feature
    Clear Stall EP 81
  MSC control request
clear feature
  Queue EP 81 with 13 bytes ...
  Queue EP 80 with 0 bytes ...
USBD Xfer Complete on EP 80 with 0 bytes
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Mode_Sense 6
  cbw: 0x55 0x53 0x42 0x43 0x20 0x26 0xeb 0xf6 0xc0 0x0 0x0 0x0 0x80 0x0 0x6 0x1a 0x0 0x8 0x0 0xc0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 4 bytes ...
USBD Xfer Complete on EP 81 with 4 bytes
  MSC xfer callback
  SCSI Data [Lun0]
    Stall EP 81

USBD Setup Received 02 01 00 00 81 00 00 00 
  Clear Feature
    Clear Stall EP 81
  MSC control request
clear feature
  Queue EP 81 with 13 bytes ...
  Queue EP 80 with 0 bytes ...
USBD Xfer Complete on EP 80 with 0 bytes
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x10 0x50 0xd5 0xfb 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x50 0xd5 0xfb 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Inquiry
  cbw: 0x55 0x53 0x42 0x43 0x10 0x50 0xd5 0xfb 0x24 0x0 0x0 0x0 0x80 0x0 0x6 0x12 0x0 0x0 0x0 0x24 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 36 bytes ...
USBD Xfer Complete on EP 81 with 36 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x50 0xd5 0xfb 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x20 0x26 0xeb 0xf6 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x20 0x26 0xeb 0xf6 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x10 0x80 0xbc 0xa 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x80 0xbc 0xa 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x50 0x55 0xc 0x1 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x50 0x55 0xc 0x1 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read10
  cbw: 0x55 0x53 0x42 0x43 0x10 0x90 0x70 0xf6 0x0 0x2 0x0 0x0 0x80 0x0 0xa 0x28 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x90 0x70 0xf6 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x90 0x42 0x4f 0x5 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x90 0x42 0x4f 0x5 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x10 0x90 0x70 0xf6 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x90 0x70 0xf6 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x10 0xc0 0x9e 0x1 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0xc0 0x9e 0x1 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x10 0x20 0xb5 0xf9 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x20 0xb5 0xf9 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x10 0x10 0xcf 0xfb 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x10 0xcf 0xfb 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read10
  cbw: 0x55 0x53 0x42 0x43 0x50 0x60 0xbd 0xa 0x0 0x2 0x0 0x0 0x80 0x0 0xa 0x28 0x0 0x0 0x0 0x0 0x2 0x0 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x50 0x60 0xbd 0xa 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x20 0x26 0xeb 0xf6 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x20 0x26 0xeb 0xf6 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x10 0x10 0xcf 0xfb 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x10 0xcf 0xfb 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read10
  cbw: 0x55 0x53 0x42 0x43 0x10 0xf0 0xe2 0xfb 0x0 0x2 0x0 0x0 0x80 0x0 0xa 0x28 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0xf0 0xe2 0xfb 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Test Unit Ready
  cbw: 0x55 0x53 0x42 0x43 0x10 0x90 0x6d 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x6 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x90 0x6d 0x3 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read10
  cbw: 0x55 0x53 0x42 0x43 0xa0 0xc1 0xfb 0x4 0x0 0x2 0x0 0x0 0x80 0x0 0xa 0x28 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0xa0 0xc1 0xfb 0x4 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Mode_Sense 6
  cbw: 0x55 0x53 0x42 0x43 0x50 0x55 0xc 0x1 0xc0 0x0 0x0 0x0 0x80 0x0 0x6 0x1a 0x0 0x3f 0x0 0xc0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 4 bytes ...
USBD Xfer Complete on EP 81 with 4 bytes
  MSC xfer callback
  SCSI Data [Lun0]
    Stall EP 81

USBD Setup Received 02 01 00 00 81 00 00 00 
  Clear Feature
    Clear Stall EP 81
  MSC control request
clear feature
  Queue EP 81 with 13 bytes ...
  Queue EP 80 with 0 bytes ...
USBD Xfer Complete on EP 80 with 0 bytes
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Test Unit Ready
  cbw: 0x55 0x53 0x42 0x43 0x10 0xe0 0x9b 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x6 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0xe0 0x9b 0x1 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Test Unit Ready
  cbw: 0x55 0x53 0x42 0x43 0x70 0xe2 0x77 0xf6 0x0 0x0 0x0 0x0 0x0 0x0 0x6 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x70 0xe2 0x77 0xf6 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x50 0x55 0xc 0x1 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x50 0x55 0xc 0x1 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0xa0 0xc1 0xfb 0x4 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0xa0 0xc1 0xfb 0x4 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read10
  cbw: 0x55 0x53 0x42 0x43 0x10 0x20 0xb5 0xf9 0x0 0x2 0x0 0x0 0x80 0x0 0xa 0x28 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x20 0xb5 0xf9 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x10 0xf0 0xe2 0xfb 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0xf0 0xe2 0xfb 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x20 0x26 0xeb 0xf6 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x20 0x26 0xeb 0xf6 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read10
  cbw: 0x55 0x53 0x42 0x43 0xa0 0xc1 0xfb 0x4 0x0 0x2 0x0 0x0 0x80 0x0 0xa 0x28 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0xa0 0xc1 0xfb 0x4 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x10 0x90 0x70 0xf6 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x90 0x70 0xf6 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x10 0xf0 0xe2 0xfb 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0xf0 0xe2 0xfb 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x10 0x10 0xcf 0xfb 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x10 0xcf 0xfb 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read10
  cbw: 0x55 0x53 0x42 0x43 0xa0 0xc1 0xfb 0x4 0x0 0x2 0x0 0x0 0x80 0x0 0xa 0x28 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0xa0 0xc1 0xfb 0x4 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read10
  cbw: 0x55 0x53 0x42 0x43 0x50 0x55 0xc 0x1 0x0 0x20 0x0 0x0 0x80 0x0 0xa 0x28 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x10 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x50 0x55 0xc 0x1 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Test Unit Ready
  cbw: 0x55 0x53 0x42 0x43 0x10 0x90 0x6d 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x6 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x90 0x6d 0x3 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x10 0x20 0xb5 0xf9 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x20 0xb5 0xf9 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Test Unit Ready
  cbw: 0x55 0x53 0x42 0x43 0x10 0xc0 0xeb 0xf8 0x0 0x0 0x0 0x0 0x0 0x0 0x6 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0xc0 0xeb 0xf8 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read10
  cbw: 0x55 0x53 0x42 0x43 0x10 0x20 0xb5 0xf9 0x0 0x10 0x0 0x0 0x80 0x0 0xa 0x28 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x8 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x20 0xb5 0xf9 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read10
  cbw: 0x55 0x53 0x42 0x43 0x50 0x60 0xbd 0xa 0x0 0x2 0x0 0x0 0x80 0x0 0xa 0x28 0x0 0x0 0x0 0x0 0x2 0x0 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x50 0x60 0xbd 0xa 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Mode_Sense 6
  cbw: 0x55 0x53 0x42 0x43 0x10 0xc0 0x9e 0x1 0xc0 0x0 0x0 0x0 0x80 0x0 0x6 0x1a 0x0 0x3f 0x0 0xc0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 4 bytes ...
USBD Xfer Complete on EP 81 with 4 bytes
  MSC xfer callback
  SCSI Data [Lun0]
    Stall EP 81

USBD Setup Received 02 01 00 00 81 00 00 00 
  Clear Feature
    Clear Stall EP 81
  MSC control request
clear feature
  Queue EP 81 with 13 bytes ...
  Queue EP 80 with 0 bytes ...
USBD Xfer Complete on EP 80 with 0 bytes
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x10 0x20 0xb5 0xf9 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x20 0xb5 0xf9 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read10
  cbw: 0x55 0x53 0x42 0x43 0x90 0x42 0x4f 0x5 0x0 0x2 0x0 0x0 0x80 0x0 0xa 0x28 0x0 0x0 0x0 0x0 0x2 0x0 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x90 0x42 0x4f 0x5 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Test Unit Ready
  cbw: 0x55 0x53 0x42 0x43 0x10 0xf0 0x5e 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x6 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0xf0 0x5e 0x1 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read10
  cbw: 0x55 0x53 0x42 0x43 0x10 0x20 0xb5 0xf9 0x0 0x2 0x0 0x0 0x80 0x0 0xa 0x28 0x0 0x0 0x0 0x0 0x4 0x0 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x20 0xb5 0xf9 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x10 0x80 0xbc 0xa 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x80 0xbc 0xa 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Test Unit Ready
  cbw: 0x55 0x53 0x42 0x43 0xd0 0x87 0xba 0xf4 0x0 0x0 0x0 0x0 0x0 0x0 0x6 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0xd0 0x87 0xba 0xf4 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Write10
  cbw: 0x55 0x53 0x42 0x43 0x90 0x42 0x4f 0x5 0x0 0x2 0x0 0x0 0x0 0x0 0xa 0x2a 0x0 0x0 0x0 0x0 0x2 0x0 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 01 with 512 bytes ...
USBD Xfer Complete on EP 01 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x90 0x42 0x4f 0x5 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Write10
  cbw: 0x55 0x53 0x42 0x43 0x50 0x55 0xc 0x1 0x0 0x2 0x0 0x0 0x0 0x0 0xa 0x2a 0x0 0x0 0x0 0x0 0x1 0x0 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 01 with 512 bytes ...
USBD Xfer Complete on EP 01 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x50 0x55 0xc 0x1 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Write10
  cbw: 0x55 0x53 0x42 0x43 0x50 0x60 0xbd 0xa 0x0 0x2 0x0 0x0 0x0 0x0 0xa 0x2a 0x0 0x0 0x0 0x0 0x4 0x0 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 01 with 512 bytes ...
USBD Xfer Complete on EP 01 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x50 0x60 0xbd 0xa 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Test Unit Ready
  cbw: 0x55 0x53 0x42 0x43 0x10 0x90 0x6d 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x6 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x90 0x6d 0x3 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Write10
  cbw: 0x55 0x53 0x42 0x43 0x10 0x20 0xb5 0xf9 0x0 0x2 0x0 0x0 0x0 0x0 0xa 0x2a 0x0 0x0 0x0 0x0 0x4 0x0 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 01 with 512 bytes ...
USBD Xfer Complete on EP 01 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x20 0xb5 0xf9 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read10
  cbw: 0x55 0x53 0x42 0x43 0x10 0xc0 0x9e 0x1 0x0 0x20 0x0 0x0 0x80 0x0 0xa 0x28 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x10 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 512 bytes ...
USBD Xfer Complete on EP 81 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0xc0 0x9e 0x1 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Write10
  cbw: 0x55 0x53 0x42 0x43 0x90 0x42 0x4f 0x5 0x0 0x2 0x0 0x0 0x0 0x0 0xa 0x2a 0x0 0x0 0x0 0x0 0x4 0x0 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 01 with 512 bytes ...
USBD Xfer Complete on EP 01 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x90 0x42 0x4f 0x5 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x10 0x80 0xbc 0xa 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x80 0xbc 0xa 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Write10
  cbw: 0x55 0x53 0x42 0x43 0x10 0x90 0x70 0xf6 0x0 0x2 0x0 0x0 0x0 0x0 0xa 0x2a 0x0 0x0 0x0 0x0 0x5 0x0 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 01 with 512 bytes ...
USBD Xfer Complete on EP 01 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x90 0x70 0xf6 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x50 0x60 0xbd 0xa 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x50 0x60 0xbd 0xa 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Write10
  cbw: 0x55 0x53 0x42 0x43 0x10 0xc0 0x9e 0x1 0x0 0x2 0x0 0x0 0x0 0x0 0xa 0x2a 0x0 0x0 0x0 0x0 0x1 0x0 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 01 with 512 bytes ...
USBD Xfer Complete on EP 01 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0xc0 0x9e 0x1 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x90 0x42 0x4f 0x5 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x90 0x42 0x4f 0x5 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x10 0x90 0x70 0xf6 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x90 0x70 0xf6 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Read Capacity10
  cbw: 0x55 0x53 0x42 0x43 0x50 0x60 0xbd 0xa 0x8 0x0 0x0 0x0 0x80 0x0 0xa 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 8 bytes ...
USBD Xfer Complete on EP 81 with 8 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x50 0x60 0xbd 0xa 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Test Unit Ready
  cbw: 0x55 0x53 0x42 0x43 0x10 0x90 0x6d 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x6 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x90 0x6d 0x3 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Write10
  cbw: 0x55 0x53 0x42 0x43 0x10 0x80 0xbc 0xa 0x0 0x2 0x0 0x0 0x0 0x0 0xa 0x2a 0x0 0x0 0x0 0x0 0x4 0x0 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 01 with 512 bytes ...
USBD Xfer Complete on EP 01 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x80 0xbc 0xa 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Write10
  cbw: 0x55 0x53 0x42 0x43 0x90 0x42 0x4f 0x5 0x0 0x2 0x0 0x0 0x0 0x0 0xa 0x2a 0x0 0x0 0x0 0x0 0x4 0x0 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 01 with 512 bytes ...
USBD Xfer Complete on EP 01 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x90 0x42 0x4f 0x5 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Write10
  cbw: 0x55 0x53 0x42 0x43 0x50 0x55 0xc 0x1 0x0 0x2 0x0 0x0 0x0 0x0 0xa 0x2a 0x0 0x0 0x0 0x0 0x6 0x0 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 01 with 512 bytes ...
USBD Xfer Complete on EP 01 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x50 0x55 0xc 0x1 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Write10
  cbw: 0x55 0x53 0x42 0x43 0x10 0x80 0xbc 0xa 0x0 0x2 0x0 0x0 0x0 0x0 0xa 0x2a 0x0 0x0 0x0 0x0 0x1 0x0 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 01 with 512 bytes ...
USBD Xfer Complete on EP 01 with 512 bytes
  MSC xfer callback
  SCSI Data [Lun0]
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x80 0xbc 0xa 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Test Unit Ready
  cbw: 0x55 0x53 0x42 0x43 0x10 0x90 0x6d 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x6 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x90 0x6d 0x3 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Test Unit Ready
  cbw: 0x55 0x53 0x42 0x43 0x10 0x90 0x6d 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x6 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x90 0x6d 0x3 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Test Unit Ready
  cbw: 0x55 0x53 0x42 0x43 0x10 0x90 0x6d 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x6 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x90 0x6d 0x3 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Test Unit Ready
  cbw: 0x55 0x53 0x42 0x43 0x10 0x90 0x6d 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x6 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x90 0x6d 0x3 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...
USBD Xfer Complete on EP 01 with 31 bytes
  MSC xfer callback
  SCSI Command [Lun0]: Test Unit Ready
  cbw: 0x55 0x53 0x42 0x43 0x10 0x90 0x6d 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x6 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
  Queue EP 81 with 13 bytes ...
  csw: 0x55 0x53 0x42 0x53 0x10 0x90 0x6d 0x3 0x0 0x0 0x0 0x0 0x0 
USBD Xfer Complete on EP 81 with 13 bytes
  MSC xfer callback
  SCSI Status [Lun0] = 0
  Queue EP 01 with 31 bytes ...

你可能感兴趣的:(MSC,BOT,U盘,UFI,SCSI)

解决“此卷不包含可识别的文件系统”问题，数据恢复有妙招！ Konkakou 服务器大数据网络
遭遇“此卷不包含可识别的文件系统”的困境当您试图访问某个存储设备时，如果系统提示“此卷不包含可识别的文件系统”，那么您可能正面临一个棘手的问题。这种情况通常发生在硬盘、U盘、SD卡等存储设备中，意味着存储设备中的文件系统已经损坏或无法被操作系统识别。面对这样的困境，如何找回宝贵的数据成为了当务之急。深入分析“此卷不包含可识别的文件系统”的原因造成“此卷不包含可识别的文件系统”问题的原因可能有很多。
记录：Windows找不到文件gpedit.msc教程方案|亲测有效 bug菌¹ 全栈Bug调优(实战版)#CSDN问答解惑(全栈版)windows gpedit.msc
‍作者：bug菌✏️博客：CSDN、掘金、infoQ、51CTO等简介：CSDN博客专家，历届博客之星Top30，掘金年度人气作者No.40，掘金/InfoQ/51CTO等社区优质创作者，全网粉丝合计10w+，对一切技术感兴趣，重心偏Java方向；硬核公众号「猿圈奇妙屋」，欢迎小伙伴们的加入，一起秃头，一起变强。…✍️温馨提醒：本文字数：1699字,阅读完需：约5分钟一、前言组策略是一个非常方便的
找不到gpedit.msc 的解决方法大写字母E 计算机配置 window
通常打开本地组策略编辑器，只需要win+R在运行里输入gpedit.msc就可以打开。但是，在windows家庭版和学生版里，会提示找不到路径。可以用以下办法解决:新建一个文本文档，名字随便取，编辑以下批处理内容，保存后将后缀名改为.bat,右键使用管理员权限执行:@echooffpushd"%~dp0"dir/bC:\Windows\servicing\Packages\Microsoft-Wi
【cmd】Win10家庭版找不到 gpedit.msc （组策略）的解决方法顾三殇 Win 服务器部署/cmd 命令组策略
目录一、创建cmd文件二、以“管理员身份”运行“gpedit.cmd”文件三、运行“gpedit.msc”命令查看组策略一、创建cmd文件（1）新建一个文件名为“gpedit.txt”的txt文本文档：（2）文本中写入以下内容：@echooffpushd"%~dp0"dir/bC:\Windows\servicing\Packages\Microsoft-Windows-GroupPolicy-C
查询和XXX同学学习的课程完全相同的其他同学学号和姓名魔法少女小严学习
createtablescore(s_idvarchar(20),c_idvarchar(20),s_scoreint(3),primarykey(s_id,c_id));createtablestudent(s_idvarchar(20),s_namevarchar(20)notnull,primarykey(s_id));第一步:查询XXX同学选的所有课selectc_idfromscorew
解决远程桌面连接后没有声音的问题 huanghong6956
1.首先确定被远程主机已安装声卡和驱动，换句话说就是被远程主机可以出声2.在被远程主机上，开始－运行－gpedit.msc，打开组策略计算机配置－管理模板－终端服务－客户端/服务器数据重定向－启用“允许音频重定向3.重启4.欧了
僵尸DDOS设置与部署.c 金猪报喜-阿尔法网络安全
importsubprocess,sys#[email protected](sys.argv[2])!=0:ip=sys.argv[2]else:print("\x1b[1;95mIncorrectUsage!\x1b[0m")exit(1)bot=sys.argv[1]Sakura=raw_input("\x1b[1;95mReadyToInstallCrossCompilers?
ASUS/华硕飞行堡垒8 FX506L FX706L 原厂Win10系统工厂文件带ASUS Recovery恢复无限的奇迹电脑
华硕工厂文件恢复系统，安装结束后带隐藏分区，带一键恢复，以及机器所有的驱动和软件。支持型号：FX506LI,FX706LI,FX506LH,FX706LH,FX506LU系统版本：Windows10文件下载：ycoemxt.cn/376.html文件格式：工厂文件安装教程：ycoemxt.cn/176.html需准备一个20G以上u盘进行恢复若不会使用可联系作者有偿远程安装若无U盘，还想要恢复功能
python scapy 抓包_python 抓包保存为pcap文件并解析的实例 weixin_39626369 python scapy 抓包
首先是抓包，使用scapy模块，sniff()函数在其中参数为本地文件路径时，操作为打开本地文件若参数为BPF过滤规则和回调函数，则进行Sniff，回调函数用于对Sniff到的数据包进行处理importosfromscapy.allimport*pkts=[]count=0pcapnum=0filename=''deftest_dump_file(dump_file):print"Testingt
【AI系列】从零开始学习大模型GPT (2)- Build a Large Language Model (From Scratch) Tasfa AI人工智能教程人工智能学习 gpt
前序文章【AI系列】从零开始学习大模型GPT(1)-BuildaLargeLanguageModel(FromScratch)BuildaLargeLanguageModel背景第1章：理解大型语言模型第2章：处理文本数据第3章：编码Attention机制什么是Attention机制？Attention机制的基本原理数学表示应用总结为什么要使用注意力机制如何实现？简单注意力机制带训练权重的注意力机
IDC服务器初始化--PXE引导运维
深夜的机房，运维工程师小李正面临一场噩梦：50台新到的服务器需要安装操作系统。按照传统方式，他需要准备一堆U盘，一台接一台地安装，这意味着一场通宵的"体力劳动"。但这次不同，只见他在控制台输入几行命令，所有服务器就像被施了魔法一样，开始自动安装系统。这就是PXE引导安装方式。一、什么是PXE？PXE（PrebooteXecutionEnvironment，预启动执行环境）是一种网络启动技术。想象一
IBM服务器刀箱Blade安装Hyper-V Server 2019 操作系统偏执网友 Windows&服务器服务器 IBM Hyper-V Server
案例：刀箱某一blade，例如blade5安装Hyper-VServer2019操作系统（安装进硬盘）刀箱USB插入安装系统U盘，登录192.168...IBMBlandeCenterRestartBlande5，如果Restart没反应，那就PowerOffBlade然后再PowerOn重启后进入BIOS界面设置usb存储为开机启动项设置步骤：按F1进入BIOS界面>BootManager>Ad
理解K8S CSI-S3中的节点插件与控制器插件：架构设计与核心职责孤傲 kubernetes 容器云原生
理解K8SCSI-S3中的节点插件与控制器插件：架构设计与核心职责在云原生生态中，Kubernetes已成为容器编排的事实标准，而存储管理则是其核心挑战之一。传统块存储和文件存储已通过CSI（ContainerStorageInterface）插件实现了标准化接入，但对象存储（如AmazonS3）因其独特的接口和语义，需要特殊适配。CSI-S3项目应运而生，它通过标准的CSI接口将S3兼容的对象存
ASUS/华硕枪神7 Plus 超竞版魔霸新锐2023 G634J G614J G834J G814J 原厂Win11 24H2专业版系统工厂文件带ASUS Recovery恢复无限的奇迹电脑
华硕工厂文件恢复系统，安装结束后带隐藏分区，带一键恢复，以及机器所有的驱动和软件。支持型号：G634JY,G634JZ,G614JZ,G614JI,G614JV,G614JU,G614JJ,G834JY,G834JZ,G814JZ,G814JI,G814JV,G814JU系统版本：Windows1124H2专业版文件下载：点击下载文件格式：工厂文件安装教程：点击查看需准备一个20G以上u盘进行恢复
ASUS/华硕幻16 GU603H 原厂 Win10 专业版系统工厂文件带ASUS Recovery恢复无限的奇迹电脑
华硕工厂文件恢复系统，安装结束后带隐藏分区，带一键恢复，以及机器所有的驱动和软件。支持型号：GU603HR,GU603HM,GU603HE系统版本：Windows10专业版文件下载：点击下载文件格式：工厂文件安装教程：点击查看需准备一个20G以上u盘进行恢复若不会使用可联系作者有偿远程安装若无U盘，还想要恢复功能，请联系技术远程部署安装。请注意：仅支持以上型号专用，其他华硕机器切勿使用
联想Y7000P win11笔记本双硬盘安装Ubuntu20双系统和显卡驱动自动驾驶仿真测试 ubuntu linux NVIDIA 双系统
最新需要一个Ubuntu系统进行学习和工作，于是在笔记本上安装双系统。电脑为联想Y7000P，win11系统，电脑自带一块固态硬盘，我又加装了一块。所以win11在一块硬盘上，Ubuntu20准备安装在另一块硬盘上。参考了这位博主的步骤，但是不完全相同，感谢博主。安装U盘准备（1）镜像下载官网提供了最新版本目前为22.04的下载链接。由于我需要20.04，于是去了官网这里下载。还提供了国内的一些镜
在 Flutter 实现下拉刷新、上拉加载更多和一键点击回到顶部的功能 B.- flutter ios android
在Flutter中，实现下拉刷新、上拉加载更多和一键点击回到顶部的功能，通常会结合使用RefreshIndicator、ListView和ScrollController来实现这些交互效果。下面分别介绍如何实现这些功能。1.下拉刷新Flutter提供了RefreshIndicator组件来实现下拉刷新的功能。它会包裹一个滚动视图（如ListView或CustomScrollView），并在用户下拉
k8s之CSI详解爱吃芝麻汤圆 #k8s kubernetes 容器云原生
KubernetesCSI详解一、CSI概述ContainerStorageInterface（CSI）是一个标准化接口，用于定义容器编排系统（如Kubernetes）与存储供应商（StorageProviders）之间的交互方式。其目标是让存储供应商开发的插件能够兼容多个容器编排系统（如Kubernetes、Mesos、Swarm等），从而简化存储资源的管理和使用。在Kubernetes中，CS
uniapp 页面滚动到指定dom位置你头发乱了喔_ 小技巧 uni-app 方法封装前端 uni-app
uniapp页面滚动到指定dom位置页面滚动到指定位置,uniapp提供了获取dom对象实例的api和页面滚动的api,结合一下就可以了文档:获取对象实例api文档页面滚动api文档上代码://methods中声明方法,需要滚动的时候调用就行pageScroll(){//先获取目标dom的实例信息//data即为实例信息,data.top,data.left,data.right,data.bot
SQL面试题 bjwuzh 软件测试面试题 sql 数据库 java
学生表Student(S#,Sname,Sage,Ssex)学生表Course(C#,Cname,T#)课程表SC(S#,C#,score)成绩表Teacher(T#,Tname)教师表--1、查询“001”课程比“002”课程成绩高的所有学生的学号SELECTa.S#FROM(SELECTS#,scoreFROMSCWHEREC#='001')a,(SELECTS#,scoreFROMSCWHE
macOS Sonoma 14.7.4 (23H420) Boot ISO 原版可引导镜像下载 macos
macOSSonoma14.7.4(23H420)BootISO原版可引导镜像下载本站下载的macOS软件包，既可以拖拽到Applications（应用程序）下直接安装，也可以制作启动U盘安装，或者在虚拟机中启动安装。另外也支持在Windows和Linux中创建可引导介质。请访问原文链接：https://sysin.org/blog/macOS-Sonoma-boot-iso/查看最新版。原创作品
macOS Ventura 13.7.4 (22H420) Boot ISO 原版可引导镜像下载 macos
macOSVentura13.7.4(22H420)BootISO原版可引导镜像下载本站下载的macOS软件包，既可以拖拽到Applications（应用程序）下直接安装，也可以制作启动U盘安装，或者在虚拟机中启动安装。另外也支持在Windows和Linux中创建可引导介质。请访问原文链接：https://sysin.org/blog/macOS-Ventura-boot-iso/查看最新版。原创
基于Ernie-Bot打造语音对话功能人工智能llm语音
大模型场景实战培训，提示词效果调优，大模型应用定制开发，点击咨询GPT-4的语音对话功能前段时间在网上火了一把，许多人被其强大的自然语言处理能力和流畅的语音交互所吸引。现在，让我们来看看如何使用类似的技术，即基于百度的ERNIE-Bot，来打造自己的语音对话功能。ERNIE-Bot是一种先进的语言理解模型，可以处理复杂的语言任务，包括语音到文本的转换和自然语言理解。视频演示:shequ.mov涉及
嘿~ Win安装失败？来试试DeepinOS Huterox 突发奇想 ubuntu linux 运维
文章目录前言镜像与启动U盘镜像下载制作启动U盘安装设置账户总结前言说来也气，本来是不会有这篇博文的，奈何家里的老电脑不正确，重装win10直接蓝屏，各种方案都试过了，但是都没有用，于是怀揣着最后的希望，我安装了Ubuntu没想到成功了。但是这个Ubuntu界面实在是太丑了，本来是想打一下美化的。但是无意中发现有个“国产”操作系统Deepin，看起来界面也不错，那刚好就装来玩玩，看看咋样。当然最最重
python实现线性规划数学建模代替matlab Leowner python数学建模 python 数学建模
要解决的问题如图所示importnumpyasnpfromscipyimportoptimizez=np.array([2,3,1])a=np.array([
cocos creator从零开发2048(10)-重新开始游戏 cocos
Canvas节点下新建Sprite(单色)并重命名为btnRestart，Position设置为280和402，Size设置为150x60，Color设置为#A69A91，挂载Button组件并设置Transation属性为Scale、ZoomScale属性为1.1。btnRestart节点下新建Label(文字)，String输入重新开始，FontSize和LineHeight都设置为30。编辑
云电脑故障，云电脑的常见故障及解决方法运维服务器
随着企业规模的扩大和服务的增加，服务器数量也随之增长，手动管理每台服务器不仅效率低下，而且容易出错，云电脑工具能够集中管理所有服务器，实现自动化配置、更新和监控，显著提升管理效率和准确性。小编给大家讲解云电脑的常见故障及解决方法。云电脑的常见故障及解决方法如下：1.U盘无法识别或识别时间长：解决方法：确保U盘格式为NTFS，FAT32格式可能导致识别慢或无法识别。在云桌面中将U盘格式化为NTFS格
Colorful/七彩虹隐星P16 23 原厂Win11 家庭版系统带F9 Colorful一键恢复功能无限的奇迹电脑
Colorful/七彩虹隐星P1623原厂Win11家庭中文版系统带F9Colorful一键恢复功能自动重建COLORFULRECOVERY功能带所有随机软件和机型专用驱动支持机型：隐星P1623文件格式：ISO文件下载：点击下载系统版本：Windows11安装教程：点击查看需准备一个20G以上u盘进行恢复若不会使用可联系作者有偿远程安装
Chapter4.1 Coding an LLM architecture 亲持红叶构建大语言模型(从头开始)gpt python 人工智能自然语言处理 transformer
文章目录4ImplementingaGPTmodelfromScratchToGenerateText4.1CodinganLLMarchitecture4ImplementingaGPTmodelfromScratchToGenerateText本章节包含编写一个类似于GPT的大型语言模型（LLM），这个模型可以被训练来生成类似人类的文本。Normalizinglayeractivationst
USB大容量存储设备无法启动--这个设备(服务)的驱动程序已被禁用。另一个驱动程序可以提供这个功能。 u010748717 电脑使用
题描述如下：这个设备(服务)的驱动程序已被禁用。另一个驱动程序可以提供这个功能。(代码32)这个问题困扰我一个多月，经测试，u盘和移动硬盘均正常。问题解决方法：1、按“win+R"进行入运行界面；2、输入"regedit";3、找到：“计算机/HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/”目录下几个usb开头的文件夹；4、鉴于我们usb
Spring中@Value注解，需要注意的地方无量 spring bean @Value xml
Spring 3以后,支持@Value注解的方式获取properties文件中的配置值，简化了读取配置文件的复杂操作 1、在applicationContext.xml文件(或引用文件中)中配置properties文件 <bean id="appProperty" class="org.springframework.beans.fac
mongoDB 分片开窍的石头 mongodb
mongoDB的分片。要mongos查询数据时候先查询configsvr看数据在那台shard上，configsvr上边放的是metar信息，指的是那条数据在那个片上。由此可以看出mongo在做分片的时候咱们至少要有一个configsvr,和两个以上的shard（片）信息。第一步启动两台以上的mongo服务 &nb
OVER(PARTITION BY)函数用法 0624chenhong oracle
这篇写得很好，引自 http://www.cnblogs.com/lanzi/archive/2010/10/26/1861338.html OVER(PARTITION BY)函数用法 2010年10月26日 OVER(PARTITION BY)函数介绍开窗函数 &nb
Android开发中，ADB server didn't ACK 解决方法一炮送你回车库 Android开发
首先通知：凡是安装360、豌豆荚、腾讯管家的全部卸载，然后再尝试。一直没搞明白这个问题咋出现的，但今天看到一个方法，搞定了！原来是豌豆荚占用了 5037 端口导致。参见原文章：一个豌豆荚引发的血案——关于ADB server didn't ACK的问题简单来讲，首先将Windows任务进程中的豌豆荚干掉，如果还是不行，再继续按下列步骤排查。 &nb
canvas中的像素绘制问题换个号韩国红果果 JavaScript canvas
pixl的绘制，1.如果绘制点正处于相邻像素交叉线，绘制x像素的线宽，则从交叉线分别向前向后绘制x/2个像素，如果x/2是整数，则刚好填满x个像素，如果是小数，则先把整数格填满，再去绘制剩下的小数部分，绘制时，是将小数部分的颜色用来除以一个像素的宽度，颜色会变淡。所以要用整数坐标来画的话（即绘制点正处于相邻像素交叉线时），线宽必须是2的整数倍。否则会出现不饱满的像素。 2.如果绘制点为一个像素的
编码乱码问题灵静志远 java jvm jsp 编码
1、JVM中单个字符占用的字节长度跟编码方式有关，而默认编码方式又跟平台是一一对应的或说平台决定了默认字符编码方式；2、对于单个字符：ISO-8859-1单字节编码，GBK双字节编码，UTF-8三字节编码；因此中文平台(中文平台默认字符集编码GBK)下一个中文字符占2个字节，而英文平台(英文平台默认字符集编码Cp1252(类似于ISO-8859-1))。 3、getBytes()、getByte
java 求几个月后的日期 darkranger calendar getinstance
Date plandate = planDate.toDate(); SimpleDateFormat df = new SimpleDateFormat("yyyy-MM-dd"); Calendar cal = Calendar.getInstance(); cal.setTime(plandate); // 取得三个月后时间 cal.add(Calendar.M
数据库设计的三大范式（通俗易懂） aijuans 数据库复习
关系数据库中的关系必须满足一定的要求。满足不同程度要求的为不同范式。数据库的设计范式是数据库设计所需要满足的规范。只有理解数据库的设计范式，才能设计出高效率、优雅的数据库，否则可能会设计出错误的数据库. 目前，主要有六种范式：第一范式、第二范式、第三范式、BC范式、第四范式和第五范式。满足最低要求的叫第一范式，简称1NF。在第一范式基础上进一步满足一些要求的为第二范式，简称2NF。其余依此类推。
想学工作流怎么入手 atongyeye jbpm
工作流在工作中变得越来越重要，很多朋友想学工作流却不知如何入手。很多朋友习惯性的这看一点，那了解一点，既不系统，也容易半途而废。好比学武功，最好的办法是有一本武功秘籍。研究明白，则犹如打通任督二脉。系统学习工作流，很重要的一本书《JBPM工作流开发指南》。本人苦苦学习两个月，基本上可以解决大部分流程问题。整理一下学习思路，有兴趣的朋友可以参考下。 1 首先要
Context和SQLiteOpenHelper创建数据库百合不是茶 android Context创建数据库
一直以为安卓数据库的创建就是使用SQLiteOpenHelper创建,但是最近在android的一本书上看到了Context也可以创建数据库,下面我们一起分析这两种方式创建数据库的方式和区别,重点在SQLiteOpenHelper 一:SQLiteOpenHelper创建数据库: 1,SQLi
浅谈group by和distinct bijian1013 oracle 数据库 group by distinct
group by和distinct只了去重意义一样，但是group by应用范围更广泛些，如分组汇总或者从聚合函数里筛选数据等。譬如：统计每id数并且只显示数大于3 select id ,count(id) from ta
vi opertion 征客丶 mac opration vi
进入 command mode （命令行模式）按 esc 键再按 shift + 冒号注：以下命令中带 $ 【在命令行模式下进行】，不带 $ 【在非命令行模式下进行】一、文件操作 1.1、强制退出不保存 $ q! 1.2、保存 $ w 1.3、保存并退出 $ wq 1.4、刷新或重新加载已打开的文件 $ e 二、光标移动 2.1、跳到指定行数字
【Spark十四】深入Spark RDD第三部分RDD基本API bit1129 spark
对于K/V类型的RDD,如下操作是什么含义？ val rdd = sc.parallelize(List(("A",3),("C",6),("A",1),("B",5)) rdd.reduceByKey(_+_).collect reduceByKey在这里的操作，是把
java类加载机制 BlueSkator java 虚拟机
java类加载机制 1.java类加载器的树状结构引导类加载器 ^ | 扩展类加载器 ^ | 系统类加载器 java使用代理模式来完成类加载，java的类加载器也有类似于继承的关系，引导类是最顶层的加载器，它是所有类的根加载器，它负责加载java核心库。当一个类加载器接到装载类到虚拟机的请求时，通常会代理给父类加载器，若已经是根加载器了，就自己完成加载。虚拟机区分一个Cla
动态添加文本框 BreakingBad 文本框
<script> var num=1; function AddInput() { var str=""; str+="<input
读《研磨设计模式》-代码笔记-单例模式 bylijinnan java 设计模式
声明：本文只为方便我个人查阅和理解，详细的分析以及源代码请移步原作者的博客http://chjavach.iteye.com/ public class Singleton { } /* * 懒汉模式。注意，getInstance如果在多线程环境中调用，需要加上synchronized，否则存在线程不安全问题 */ class LazySingleton
iOS应用打包发布常见问题 chenhbc ios iOS发布 iOS上传 iOS打包
这个月公司安排我一个人做iOS客户端开发，由于急着用，我先发布一个版本，由于第一次发布iOS应用，期间出了不少问题，记录于此。 1、使用Application Loader 发布时报错：Communication error.please use diagnostic mode to check connectivity.you need to have outbound acc
工作流复杂拓扑结构处理新思路 comsci 设计模式工作算法企业应用 OO
我们走的设计路线和国外的产品不太一样，不一样在哪里呢？国外的流程的设计思路是通过事先定义一整套规则(类似XPDL)来约束和控制流程图的复杂度(我对国外的产品了解不够多，仅仅是在有限的了解程度上面提出这样的看法)，从而避免在流程引擎中处理这些复杂的图的问题，而我们却没有通过事先定义这样的复杂的规则来约束和降低用户自定义流程图的灵活性，这样一来，在引擎和流程流转控制这一个层面就会遇到很
oracle 11g新特性Flashback data archive daizj oracle
1. 什么是flashback data archive Flashback data archive是oracle 11g中引入的一个新特性。Flashback archive是一个新的数据库对象，用于存储一个或多表的历史数据。Flashback archive是一个逻辑对象，概念上类似于表空间。实际上flashback archive可以看作是存储一个或多个表的所有事务变化的逻辑空间。
多叉树:2-3-4树 dieslrae 树
平衡树多叉树,每个节点最多有4个子节点和3个数据项,2,3,4的含义是指一个节点可能含有的子节点的个数,效率比红黑树稍差.一般不允许出现重复关键字值.2-3-4树有以下特征: 1、有一个数据项的节点总是有2个子节点(称为2-节点) 2、有两个数据项的节点总是有3个子节点(称为3-节
C语言学习七动态分配 malloc的使用 dcj3sjt126com c language malloc
/* 2013年3月15日15:16:24 malloc 就memory(内存) allocate(分配)的缩写本程序没有实际含义，只是理解使用 */ # include <stdio.h> # include <malloc.h> int main(void) { int i = 5; //分配了4个字节静态分配 int * p
Objective-C编码规范[译] dcj3sjt126com 代码规范
原文链接 : The official raywenderlich.com Objective-C style guide 原文作者 : raywenderlich.com Team 译文出自 : raywenderlich.com Objective-C编码规范译者 : Sam Lau
0.性能优化-目录 frank1234 性能优化
从今天开始笔者陆续发表一些性能测试相关的文章，主要是对自己前段时间学习的总结，由于水平有限，性能测试领域很深，本人理解的也比较浅，欢迎各位大咖批评指正。主要内容包括：一、性能测试指标吞吐量、TPS、响应时间、负载、可扩展性、PV、思考时间 http://frank1234.iteye.com/blog/2180305 二、性能测试策略生产环境相同基准测试预热等 htt
Java父类取得子类传递的泛型参数Class类型 happyqing java 泛型父类子类 Class
import java.lang.reflect.ParameterizedType; import java.lang.reflect.Type; import org.junit.Test; abstract class BaseDao<T> { public void getType() { //Class<E> clazz =
跟我学SpringMVC目录汇总贴、PDF下载、源码下载 jinnianshilongnian springMVC
----广告-------------------------------------------------------------- 网站核心商详页开发掌握Java技术，掌握并发/异步工具使用，熟悉spring、ibatis框架；掌握数据库技术，表设计和索引优化，分库分表/读写分离；了解缓存技术，熟练使用如Redis/Memcached等主流技术；了解Ngin
the HTTP rewrite module requires the PCRE library 流浪鱼 rewrite
./configure: error: the HTTP rewrite module requires the PCRE library. 模块依赖性Nginx需要依赖下面3个包 1. gzip 模块需要 zlib 库 ( 下载: http://www.zlib.net/ ) 2. rewrite 模块需要 pcre 库 ( 下载: http://www.pcre.org/ ) 3. s
第12章 Ajax（中） onestopweb Ajax
index.html <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/
Optimize query with Query Stripping in Web Intelligence blueoxygen BO
http://wiki.sdn.sap.com/wiki/display/BOBJ/Optimize+query+with+Query+Stripping+in+Web+Intelligence and a very straightfoward video http://www.sdn.sap.com/irj/scn/events?rid=/library/uuid/40ec3a0c-936
Java开发者写SQL时常犯的10个错误 tomcat_oracle java sql
1、不用PreparedStatements 　　有意思的是，在JDBC出现了许多年后的今天，这个错误依然出现在博客、论坛和邮件列表中，即便要记住和理解它是一件很简单的事。开发者不使用PreparedStatements的原因可能有如下几个：　　他们对PreparedStatements不了解　　他们认为使用PreparedStatements太慢了　　他们认为写Prepar
世纪互联与结盟有感阿尔萨斯
10月10日，世纪互联与（Foxcon）签约成立合资公司，有感。全球电子制造业巨头（全球500强企业）与世纪互联共同看好IDC、云计算等业务在中国的增长空间，双方迅速果断出手，在资本层面上达成合作，此举体现了全球电子制造业巨头对世纪互联IDC业务的欣赏与信任，另一方面反映出世纪互联目前良好的运营状况与广阔的发展前景。众所周知，精于电子产品制造（世界第一），对于世纪互联而言，能够与结盟