1 UI
蓝牙开始扫描位于setting的 /packages/apps/Settings/src/com/android/settings/bluetooth/BluetoothPairingDetail.java 中。
void enableScanning() {
// Clear all device states before first scan
if (!mInitialScanStarted) {
if (mAvailableDevicesCategory != null) {
removeAllDevices();
}
mLocalManager.getCachedDeviceManager().clearNonBondedDevices();
mInitialScanStarted = true;
}
super.enableScanning();
}
在这里如果没有开始扫描就清除缓存中所有的设备，然后将缓存的设备中没有配对的设备清除，最后调用了父类 DeviceListPreferenceFragment 的enableScanning()方法：
@VisibleForTesting
void enableScanning() {
// LocalBluetoothAdapter already handles repeated scan requests
mLocalAdapter.startScanning(true);
mScanEnabled = true;
}
这里其实最终调用了/frameworks/base/packages/SettingsLib/src/com/android/settingslib/bluetooth/LocalBluetoothAdapter的startScanning方法开始扫描。
2 framework
LocalBluetoothAdapter的startScanning方法：
public void startScanning(boolean force) {
// Only start if we're not already scanning
// 只会在没有进行扫描的时候开始扫描
if (!mAdapter.isDiscovering()) {
// 如果不是强制扫描，在SCAN_EXPIRATION_MS间隔内，只扫描一次
if (!force) {
// Don't scan more than frequently than SCAN_EXPIRATION_MS,
// unless forced
if (mLastScan + SCAN_EXPIRATION_MS > System.currentTimeMillis()) {
return;
}
// If we are playing music, don't scan unless forced.
// 播放蓝牙音乐时，不进行扫描
A2dpProfile a2dp = mProfileManager.getA2dpProfile();
if (a2dp != null && a2dp.isA2dpPlaying()) {
return;
}
}
// 开始扫描
if (mAdapter.startDiscovery()) {
mLastScan = System.currentTimeMillis();
}
}
}
这里最后调用frameworks/base/core/java/android/bluetooth/BluetoothAdapter.java的startDiscovery方法，启动扫描任务
public boolean startDiscovery() {
if (!Utils.checkCaller()) {
Log.w(TAG, "startDiscovery() - Not allowed for non-active user");
return false;
}
AdapterService service = getService();
if (service == null) return false;
return service.startDiscovery();
}
3 Bluetooth App
这里的 service.startDiscovery 属于 aidl 跨进程通信，通过 IBluetooth.aidl 调用远程服务 /packages/apps/Bluetooth/src/com/android/bluetooth/btservice/AdapterService 中的 startDiscovery 方法：
boolean startDiscovery() {
enforceCallingOrSelfPermission(BLUETOOTH_ADMIN_PERM,
"Need BLUETOOTH ADMIN permission");
//do not allow new connections with active multicast
A2dpService a2dpService = A2dpService.getA2dpService();
if (a2dpService != null &&
a2dpService.isMulticastFeatureEnabled() &&
a2dpService.isMulticastOngoing(null)) {
Log.i(TAG,"A2dp Multicast is Ongoing, ignore discovery");
return false;
}
// 扫描中则终止操作
if (mAdapterProperties.isDiscovering()) {
Log.i(TAG,"discovery already active, ignore startDiscovery");
return false;
}
return startDiscoveryNative();
}
这里最终调用tartDiscoveryNative()方法，从 Java 层调到 JNI 层的com_android_bluetooth_btservice_AdapterService.cpp文件中的 startDiscoveryNative 方法：
static jboolean startDiscoveryNative(JNIEnv* env, jobject obj) {
ALOGV("%s:",__FUNCTION__);
jboolean result = JNI_FALSE;
if (!sBluetoothInterface) return result;
int ret = sBluetoothInterface->start_discovery();//该接口调用到hal层的配对函数
result = (ret == BT_STATUS_SUCCESS) ? JNI_TRUE : JNI_FALSE;
return result;
}
int ret = sBluetoothInterface->start_discovery() 这行代码调进了hal层的蓝牙协议栈中。
4 蓝牙协议栈
上面调用的start_discovery 方法位于 /system/bt/btif/src/bluetooth.cc：
static int start_discovery(void)
{
/* sanity check */ //完整性检查
if (interface_ready() == FALSE)
return BT_STATUS_NOT_READY;
return btif_dm_start_discovery();
}
start_discovery方法调用/system/bt/btif/src/btif_dm.cc的btif_dm_start_discovery方法，btif_dm.cc 用于设备管理相关的功能。
bt_status_t btif_dm_start_discovery(void) {
tBTA_DM_INQ inq_params;
tBTA_SERVICE_MASK services = 0;
BTIF_TRACE_EVENT("%s : pairing_cb.state: 0x%x", __FUNCTION__, pairing_cb.state);
/* We should not go for inquiry in BONDING STATE. */
// 处于绑定状态，则不进行扫描
if (pairing_cb.state == BT_BOND_STATE_BONDING)
return BT_STATUS_BUSY;
/* Cleanup anything remaining on index 0 */
do_in_bta_thread(
FROM_HERE,
base::Bind(&BTM_BleAdvFilterParamSetup, BTM_BLE_SCAN_COND_DELETE, 0,
nullptr, base::Bind(&bte_scan_filt_param_cfg_evt, 0)));
auto adv_filt_param = std::make_unique();
/* Add an allow-all filter on index 0*/
adv_filt_param->dely_mode = IMMEDIATE_DELY_MODE;
adv_filt_param->feat_seln = ALLOW_ALL_FILTER;
adv_filt_param->filt_logic_type = BTA_DM_BLE_PF_FILT_LOGIC_OR;
adv_filt_param->list_logic_type = BTA_DM_BLE_PF_LIST_LOGIC_OR;
adv_filt_param->rssi_low_thres = LOWEST_RSSI_VALUE;
adv_filt_param->rssi_high_thres = LOWEST_RSSI_VALUE;
do_in_bta_thread(
FROM_HERE, base::Bind(&BTM_BleAdvFilterParamSetup, BTM_BLE_SCAN_COND_ADD,
0, base::Passed(&adv_filt_param),
base::Bind(&bte_scan_filt_param_cfg_evt, 0)));
/* TODO: Do we need to handle multiple inquiries at the same time? */
/* Set inquiry params and call API */
inq_params.mode = BTA_DM_GENERAL_INQUIRY | BTA_BLE_GENERAL_INQUIRY;
#if (BTA_HOST_INTERLEAVE_SEARCH == TRUE)
inq_params.intl_duration[0] = BTIF_DM_INTERLEAVE_DURATION_BR_ONE;
inq_params.intl_duration[1] = BTIF_DM_INTERLEAVE_DURATION_LE_ONE;
inq_params.intl_duration[2] = BTIF_DM_INTERLEAVE_DURATION_BR_TWO;
inq_params.intl_duration[3] = BTIF_DM_INTERLEAVE_DURATION_LE_TWO;
#endif
inq_params.duration = BTIF_DM_DEFAULT_INQ_MAX_DURATION;
inq_params.max_resps = BTIF_DM_DEFAULT_INQ_MAX_RESULTS;
inq_params.report_dup = true;
inq_params.filter_type = BTA_DM_INQ_CLR;
/* TODO: Filter device by BDA needs to be implemented here */
/* Will be enabled to true once inquiry busy level has been received */
btif_dm_inquiry_in_progress = false;
/* find nearby devices */
BTA_DmSearch(&inq_params, services, bte_search_devices_evt);
return BT_STATUS_SUCCESS;
}
btif_dm_start_discovery方法中最终调用 /system/bt/bta/dm/bta_dm_api.cc中的 BTA_DmSearch(&inq_params, services, bte_search_devices_evt);
void BTA_DmSearch(tBTA_DM_INQ *p_dm_inq, tBTA_SERVICE_MASK services, tBTA_DM_SEARCH_CBACK *p_cback)
{
tBTA_DM_API_SEARCH *p_msg;
if ((p_msg = (tBTA_DM_API_SEARCH *) GKI_getbuf(sizeof(tBTA_DM_API_SEARCH))) != NULL)
{
memset(p_msg, 0, sizeof(tBTA_DM_API_SEARCH));
p_msg->hdr.event = BTA_DM_API_SEARCH_EVT;
memcpy(&p_msg->inq_params, p_dm_inq, sizeof(tBTA_DM_INQ));
p_msg->services = services;
p_msg->p_cback = p_cback;
p_msg->rs_res = BTA_DM_RS_NONE;
bta_sys_sendmsg(p_msg);//发送到另一个线程
}
}
调用bta_sys_sendmsg向BTA发送扫描任务消息。bta_sys_sendmsg这是蓝牙协议栈的进程间收发消息的机制，不是三言两语能说清楚的，若想了解，可以参考《android bluedroid协议栈里面的各个组件之间的消息处理机制》 这篇文章。
通过搜索event标记BTA_DM_API_SEARCH_EVT可以找到/system/bt/bta/dm/bta_dm_act.cc里面：
static void bta_dm_rs_cback(UNUSED_ATTR void* p1) {
APPL_TRACE_WARNING("bta_dm_rs_cback:%d", bta_dm_cb.rs_event);
if (bta_dm_cb.rs_event == BTA_DM_API_SEARCH_EVT) {
bta_dm_cb.search_msg.rs_res =
BTA_DM_RS_OK; /* do not care about the result for now */
bta_dm_cb.rs_event = 0;
bta_dm_search_start((tBTA_DM_MSG*)&bta_dm_cb.search_msg);// 调用内部的开启扫描方法
}
}
这边判断了如果event是BTA_DM_API_SEARCH_EVT就调用bta本身的bta_dm_search_start方法:
void bta_dm_search_start(tBTA_DM_MSG* p_data) {
tBTM_INQUIRY_CMPL result = {};
size_t len = sizeof(Uuid) * p_data->search.num_uuid;
bta_dm_gattc_register();
APPL_TRACE_DEBUG("%s avoid_scatter=%d", __func__,
p_bta_dm_cfg->avoid_scatter);
if (p_bta_dm_cfg->avoid_scatter &&
(p_data->search.rs_res == BTA_DM_RS_NONE) &&
bta_dm_check_av(BTA_DM_API_SEARCH_EVT)) {
LOG(INFO) << __func__ << ": delay search to avoid scatter";
memcpy(&bta_dm_cb.search_msg, &p_data->search, sizeof(tBTA_DM_API_SEARCH));
return;
}
BTM_ClearInqDb(nullptr);// 清除BTM中之前保存的搜索数据
/* save search params */
bta_dm_search_cb.p_search_cback = p_data->search.p_cback;
bta_dm_search_cb.services = p_data->search.services;
osi_free_and_reset((void**)&bta_dm_search_cb.p_srvc_uuid);
if ((bta_dm_search_cb.num_uuid = p_data->search.num_uuid) != 0 &&
p_data->search.p_uuid != nullptr) {
bta_dm_search_cb.p_srvc_uuid = (Uuid*)osi_malloc(len);
*bta_dm_search_cb.p_srvc_uuid = *p_data->search.p_uuid;
}
result.status = BTM_StartInquiry((tBTM_INQ_PARMS*)&p_data->search.inq_params,
bta_dm_inq_results_cb, bta_dm_inq_cmpl_cb);// 调用btm中的启动扫描
APPL_TRACE_EVENT("%s status=%d", __func__, result.status);
if (result.status != BTM_CMD_STARTED) {
LOG(ERROR) << __func__ << ": BTM_StartInquiry returned "
<< std::to_string(result.status);
result.num_resp = 0;
bta_dm_inq_cmpl_cb((void*)&result);
}
}
这里代码很多，大概就是先清除BTM中之前的搜索数据，然后保存搜索的参数，调用btm中的BTM_StartInquiry方法进行扫描。
btm的扫描操作在/system/bt/stack/btm/btm_inq.cc里面：
tBTM_STATUS BTM_StartInquiry(tBTM_INQ_PARMS* p_inqparms,
tBTM_INQ_RESULTS_CB* p_results_cb,
tBTM_CMPL_CB* p_cmpl_cb) {
tBTM_INQUIRY_VAR_ST* p_inq = &btm_cb.btm_inq_vars;
BTM_TRACE_API("BTM_StartInquiry: mode: %d, dur: %d, rsps: %d, flt: %d",
p_inqparms->mode, p_inqparms->duration, p_inqparms->max_resps,
p_inqparms->filter_cond_type);
/* Only one active inquiry is allowed in this implementation.
Also do not allow an inquiry if the inquiry filter is being updated */
if (p_inq->inq_active || p_inq->inqfilt_active) {
/*check if LE observe is already running*/
if (p_inq->scan_type == INQ_LE_OBSERVE &&
p_inq->p_inq_ble_results_cb != nullptr) {
BTM_TRACE_API("BTM_StartInquiry: LE observe in progress");
p_inq->scan_type = INQ_GENERAL;
p_inq->inq_active = BTM_INQUIRY_INACTIVE;
btm_cb.ble_ctr_cb.inq_var.scan_type = BTM_BLE_SCAN_MODE_NONE;
// 向hci发送开启扫描消息
btm_send_hci_scan_enable(BTM_BLE_SCAN_DISABLE, BTM_BLE_DUPLICATE_ENABLE);
} else {
LOG(ERROR) << __func__ << ": BTM_BUSY";
return (BTM_BUSY);
}
} else {
p_inq->scan_type = INQ_GENERAL;
}
.............省略.................
}
这边就调用/system/bt/stack/btm/btm_ble_gap.cc里面的btm_send_hci_scan_enable方法向hci发送扫描的通知：
void btm_send_hci_scan_enable(uint8_t enable, uint8_t filter_duplicates) {
if (controller_get_interface()->supports_ble_extended_advertising()) {
btsnd_hcic_ble_set_extended_scan_enable(enable, filter_duplicates, 0x0000,
0x0000);
} else {
btsnd_hcic_ble_set_scan_enable(enable, filter_duplicates);//真正与hci打交道
}
}
在这里会判断是否支持ble拓展，如果支持则调用另外一个扫描方法，这里不具体分析，这里只分析传统的扫描流程，其实内部逻辑是差不多的。
如果不支持ble拓展，则调用/system/bt/stack/hcic/hciblecmds.cc的btsnd_hcic_ble_set_scan_enable方法：
184 void btsnd_hcic_ble_set_scan_enable(uint8_t scan_enable, uint8_t duplicate) {
185 BT_HDR* p = (BT_HDR*)osi_malloc(HCI_CMD_BUF_SIZE);
186 uint8_t* pp = (uint8_t*)(p + 1);
187
188 p->len = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_BLE_WRITE_SCAN_ENABLE;
189 p->offset = 0;
190
191 UINT16_TO_STREAM(pp, HCI_BLE_WRITE_SCAN_ENABLE);
192 UINT8_TO_STREAM(pp, HCIC_PARAM_SIZE_BLE_WRITE_SCAN_ENABLE);
193
194 UINT8_TO_STREAM(pp, scan_enable);
195 UINT8_TO_STREAM(pp, duplicate);
196
197 btu_hcif_send_cmd(LOCAL_BR_EDR_CONTROLLER_ID, p);//这里是向hci层发命令
198 }
可以看出来，这里是通过和hci层的通信，host告诉controlor蓝牙地址、数据、命令等，从而控制其底层硬件发起配对操作。具体btu如何与hci通信，过程也是很繁琐，可以参考《Android BT STACK BTU 和 HCI之间的消息传递》这篇文章。
到此开启扫描的流程就结束了。有一个遗留问题就是开启扫描之后，扫描到的蓝牙设备是怎么返给上层的呢？
5 扫描结果返回
我们回头看，之前调用了在/system/bt/bta/dm/bta_dm_act.cc里面的bta_dm_search_start方法时，关键代码是：
result.status = BTM_StartInquiry((tBTM_INQ_PARMS*)&p_data->search.inq_params,
bta_dm_inq_results_cb, bta_dm_inq_cmpl_cb);
这里可以看到在调用btm的开始扫描方法的时候会传入三个参数，第一个就是启动扫描所需要传下去的参数，第二个bta_dm_inq_results_cb就是扫描结果的回调，第三个bta_dm_inq_cmpl_cb就是扫描完成的回调。也就是说btm启动扫描之后，扫描到蓝牙设备之后会通过bta_dm_inq_results_cb这个回调返给bta，而扫描结束之后会通过bta_dm_inq_cmpl_cb这个回调返给bta。
这里我们拿bta_dm_inq_results_cb这个回调来分析：
static void bta_dm_inq_results_cb(tBTM_INQ_RESULTS* p_inq, uint8_t* p_eir,
uint16_t eir_len) {
tBTA_DM_SEARCH result;
tBTM_INQ_INFO* p_inq_info;
uint16_t service_class;
result.inq_res.bd_addr = p_inq->remote_bd_addr;
memcpy(result.inq_res.dev_class, p_inq->dev_class, DEV_CLASS_LEN);
BTM_COD_SERVICE_CLASS(service_class, p_inq->dev_class);
result.inq_res.is_limited =
(service_class & BTM_COD_SERVICE_LMTD_DISCOVER) ? true : false;
result.inq_res.rssi = p_inq->rssi;
result.inq_res.ble_addr_type = p_inq->ble_addr_type;
result.inq_res.inq_result_type = p_inq->inq_result_type;
result.inq_res.device_type = p_inq->device_type;
result.inq_res.flag = p_inq->flag;
/* application will parse EIR to find out remote device name */
result.inq_res.p_eir = p_eir;
result.inq_res.eir_len = eir_len;
p_inq_info = BTM_InqDbRead(p_inq->remote_bd_addr);
if (p_inq_info != NULL) {
/* initialize remt_name_not_required to false so that we get the name by
* default */
result.inq_res.remt_name_not_required = false;
}
if (bta_dm_search_cb.p_search_cback)
bta_dm_search_cb.p_search_cback(BTA_DM_INQ_RES_EVT, &result);
if (p_inq_info) {
/* application indicates if it knows the remote name, inside the callback
copy that to the inquiry data base*/
if (result.inq_res.remt_name_not_required)
p_inq_info->appl_knows_rem_name = true;
}
}
这里面把扫描到的device数据放入result里面通过bta_dm_search_cb.p_search_cback(BTA_DM_INQ_RES_EVT, &result)回传。event是BTA_DM_INQ_RES_EVT，通过搜索这个BTA_DM_INQ_RES_EVT发现在/system/bt/btif/src/btif_dm.cc里面有一个bte_search_devices_evt方法：
static void bte_search_devices_evt(tBTA_DM_SEARCH_EVT event, tBTA_DM_SEARCH *p_data)
{
UINT16 param_len = 0;
if (p_data)
param_len += sizeof(tBTA_DM_SEARCH);
/* Allocate buffer to hold the pointers (deep copy). The pointers will point to the end of the tBTA_DM_SEARCH */
switch (event)
{
case BTA_DM_INQ_RES_EVT:
{
if (p_data->inq_res.p_eir)
param_len += HCI_EXT_INQ_RESPONSE_LEN;
}
break;
case BTA_DM_DISC_RES_EVT:
{
if (p_data->disc_res.raw_data_size && p_data->disc_res.p_raw_data)
param_len += p_data->disc_res.raw_data_size;
}
break;
}
BTIF_TRACE_DEBUG("%s event=%s param_len=%d", __FUNCTION__, dump_dm_search_event(event), param_len);
/* if remote name is available in EIR, set teh flag so that stack doesnt trigger RNR */
if (event == BTA_DM_INQ_RES_EVT)
p_data->inq_res.remt_name_not_required = check_eir_remote_name(p_data, NULL, NULL);
btif_transfer_context (btif_dm_search_devices_evt , (UINT16) event, (void *)p_data, param_len,
(param_len > sizeof(tBTA_DM_SEARCH)) ? search_devices_copy_cb : NULL);
}
这个bte_search_devices_evt方法就是扫描任务的回调函数，当扫描到设备时，回调这个方法，将上下文从BTE切换到BTIF
再调用btif_dm_search_devices_evt，将扫描到的设备通过HAL_CBACK方式返回。
static void btif_dm_search_devices_evt (UINT16 event, char *p_param)
{
tBTA_DM_SEARCH *p_search_data;
BTIF_TRACE_EVENT("%s event=%s", __FUNCTION__, dump_dm_search_event(event));
switch (event)
{
case BTA_DM_DISC_RES_EVT:
{
p_search_data = (tBTA_DM_SEARCH *)p_param;
/* Remote name update */
if (strlen((const char *) p_search_data->disc_res.bd_name))
{
bt_property_t properties[1];
bt_bdaddr_t bdaddr;
bt_status_t status;
properties[0].type = BT_PROPERTY_BDNAME;
properties[0].val = p_search_data->disc_res.bd_name;
properties[0].len = strlen((char *)p_search_data->disc_res.bd_name);
bdcpy(bdaddr.address, p_search_data->disc_res.bd_addr);
status = btif_storage_set_remote_device_property(&bdaddr, &properties[0]);
ASSERTC(status == BT_STATUS_SUCCESS, "failed to save remote device property", status);
HAL_CBACK(bt_hal_cbacks, remote_device_properties_cb,
status, &bdaddr, 1, properties);
}
/* TODO: Services? */
}
..........................省略............................
}
}
扫描到设备时，调用的是HAL_CBACK(bt_hal_cbacks, device_found_cb,num_properties, properties);
device_found_cb即是device_found_callback方法，在com_android_bluetooth_btservice_AdapterService.cpp中实现
static void device_found_callback(int num_properties, bt_property_t *properties) {
jbyteArray addr = NULL;
int addr_index;
for (int i = 0; i < num_properties; i++) {
if (properties[i].type == BT_PROPERTY_BDADDR) {
addr = callbackEnv->NewByteArray(properties[i].len);
if (addr) {
callbackEnv->SetByteArrayRegion(addr, 0, properties[i].len,
(jbyte*)properties[i].val);
addr_index = i;
} else {
ALOGE("Address is NULL (unable to allocate) in %s", __FUNCTION__);
return;
}
}
}
if (addr == NULL) {
ALOGE("Address is NULL in %s", __FUNCTION__);
return;
}
ALOGV("%s: Properties: %d, Address: %s", __FUNCTION__, num_properties,
(const char *)properties[addr_index].val);
remote_device_properties_callback(BT_STATUS_SUCCESS, (bt_bdaddr_t *)properties[addr_index].val,
num_properties, properties);
callbackEnv->CallVoidMethod(sJniCallbacksObj, method_deviceFoundCallback, addr);
checkAndClearExceptionFromCallback(callbackEnv, __FUNCTION__);
callbackEnv->DeleteLocalRef(addr);
}
该方法对应JNI方法为method_deviceFoundCallback，即
jclass jniCallbackClass =
env->FindClass("com/android/bluetooth/btservice/JniCallbacks");
..................
method_deviceFoundCallback = env->GetMethodID(jniCallbackClass, "deviceFoundCallback", "([B)V");
对应JniCallbacks.java的deviceFoundCallback方法。
void deviceFoundCallback(byte[] address) {
mRemoteDevices.deviceFoundCallback(address);
}
deviceFoundCallback将扫描到的设备通过广播发送出去
void deviceFoundCallback(byte[] address) {
// The device properties are already registered - we can send the intent
// now
BluetoothDevice device = getDevice(address);
debugLog("deviceFoundCallback: Remote Address is:" + device);
DeviceProperties deviceProp = getDeviceProperties(device);
if (deviceProp == null) {
errorLog("Device Properties is null for Device:" + device);
return;
}
Intent intent = new Intent(BluetoothDevice.ACTION_FOUND);
intent.putExtra(BluetoothDevice.EXTRA_DEVICE, device);
intent.putExtra(BluetoothDevice.EXTRA_CLASS,
new BluetoothClass(deviceProp.mBluetoothClass));
intent.putExtra(BluetoothDevice.EXTRA_RSSI, deviceProp.mRssi);
intent.putExtra(BluetoothDevice.EXTRA_NAME, deviceProp.mName);
mAdapterService.sendBroadcastMultiplePermissions(intent,
new String[] {AdapterService.BLUETOOTH_PERM,
android.Manifest.permission.ACCESS_COARSE_LOCATION});
}
只要是在上层app中注册android.bluetooth.device.action.FOUND就都可以收到该广播。
参考文档
- https://www.jianshu.com/p/442f7da43556