itop4412 python,boost,libxml2移植

python移植

host:

./configure
make python Parser/pgen
mv python hostpython
mv Parser/pgen Parser/hostpgen
make distclean

optional:

echo ac_cv_file__dev_ptmx=yes > config.site
echo ac_cv_file__dev_ptc=yes >> config.site
export CONFIG_SITE=config.site

configure arm:

CC=arm-linux-gnueabihf-gcc CXX=arm-linux-gnueabihf-g++ AR=arm-linux-gnueabihf-ar RANLIB=arm-linux-gnueabihf-ranlib
./configure --host=arm-linux --build=x86_64-linux-gnu --prefix=/home/jason/lib/arm-python --disable-ipv6 --enable-shared

build:

chmod 777 ./setup.py
make HOSTPYTHON=./hostpython HOSTPGEN=./Parser/hostpgen BLDSHARED="arm-linux-gnueabihf-gcc -shared" CROSS_COMPILE=arm-linux-gnueabihf- CROSS_COMPILE_TARGET=yes HOSTARCH=arm-linux BUILDARCH=x86_64-linux-gnu
make install HOSTPYTHON=./hostpython BLDSHARED="arm-linux-gnueabihf-gcc -shared" CROSS_COMPILE=arm-linux-gnueabihf- CROSS_COMPILE_TARGET=yes prefix=/home/jason/lib/arm-python

Note

• 编译好的目录可由其他库引用,具体如下：

• include paths: ~/lib/arm-python/include
• library paths: ~/lib/arm-python/lib

boost_python移植

• 备份宿主机的/usr/include/python2.7文件夹
• 将移植好的arm-python中的头文件拷贝到/usr/include/python2.7
• ./bootstrap.sh
• 修改生成的project-config.jam文件，具体可以参照

修改：（共五处）

• using gcc : arm : arm-none-linux-gnueabi-gcc ;
• option.set prefix :(交叉编译器所在位置);
• option.set exec-prefix :(交叉编译器所在位置)/bin ;
• option.set libdir :(交叉编译器所在位置)/lib ;
• option.set includedir :(交叉编译器所在位置)/include ;

• ./bjam stage
• 还原宿主机的python2.7头文件夹
• 编译好的目录可由其他库引用,具体如下：

• include paths: ~/lib/boost/boost
• library paths: ~/lib/boost/stage/lib

libxml2移植

1. mkdir build
2. ./configure CC=/usr/bin/arm-linux-gnueabihf-gcc --host=arm-linux --prefix=/home/jason/lib/libxml2/build/ --with-python=/home/jason/lib/libxml2/python
   CFLAGS="-I/home/jason/lib/arm-python/include/python2.7/" LDFLAGS="-L/home/jason/lib/arm-python/lib"
3. make -j8
4. make install

• 编译好的目录可由其他库引用,具体如下：

• include paths: ~/lib/libxml2/build/include
• library paths: ~/lib/libxml2/build/lib