NAT相关实验

要求

 1.拓扑搭建

  

 2.配置

  AR1的配置： 

创建acl:[AR1]acl 2000

[AR1-acl-basic-2000]rule permit source 192.168.1.0 0.0.0.255

 [AR1-acl-basic-2000]q

 [AR1]interface g0/0/1

 [AR1-GigabitEthernet0/0/1]nat outbound 2000

 缺省路由：[AR1]ip route-static 0.0.0.0 0 12.1.1.2

[AR1]interface g0/0/1

[AR1-GigabitEthernet0/0/1]nat server protocol tcp global current-interface 80 inside 192.168.1.10 80  

Warning:The port 80 is well-known port. If you continue it may cause function failure.

Are you sure to continue?[Y/N]:y  

[AR1-GigabitEthernet0/0/1]nat server protocol tcp global current-interface 888 inside 192.168.1.20 80

Warning:The port 888 is well-known port. If you continue it may cause function failure.

Are you sure to continue?[Y/N]:y

PC1手工配置：

 PC2的手工配置：

 

3. 测试：

  

通过域名访问服务器：

 

 

通过HTTP访问两台服务器：