MySQL函数计算1小时平均浓度对应的IAQI

目录

目标

空气质量指数计算对照表

IAQI函数

AQI函数

调用测试

---

目标

        根据空气质量指数标准，通过调用MySQL函数来计算：PM10、PM2.5、二氧化硫（SO2）、二氧化氮（NO2）、一氧化碳（CO）、臭氧（O3）的1小时平均浓度对应的IAQI和AQI。

---

空气质量指数计算对照表

---

IAQI函数

DELIMITER $$

USE `数据库名称`$$

DROP FUNCTION IF EXISTS `IAQI_1H`$$

CREATE DEFINER=`登录账号`@`%` FUNCTION `IAQI_1H`(param_factor_type VARCHAR(10),param_factor_value DECIMAL(10,5)) RETURNS VARCHAR(32) CHARSET utf8mb4
BEGIN
IF
param_factor_type IS NULL OR  LENGTH(REPLACE(param_factor_type,' ',''))=0
OR param_factor_value IS NULL OR param_factor_value IS NULL
THEN 
RETURN NULL;
END IF;
#二氧化硫（SO2），单位：μg/m³
IF
param_factor_type ="二氧化硫" OR LOWER(param_factor_type) ="so2"
THEN 
	IF
		param_factor_value BETWEEN 0 AND 150
	THEN
		RETURN CEILING((50-0)/(150-0)*(param_factor_value-0)+0);
	ELSEIF
		param_factor_value BETWEEN 150 AND 500
	THEN
		RETURN CEILING((100-50)/(500-150)*(param_factor_value-150)+50);
	ELSEIF
		param_factor_value BETWEEN 500 AND 650
	THEN
		RETURN CEILING((150-100)/(650-500)*(param_factor_value-500)+100);
	ELSEIF
		param_factor_value BETWEEN 650 AND 800
	THEN
		RETURN CEILING((200-150)/(800-650)*(param_factor_value-650)+150);
	ELSE
		#SO2高于800，1h平均浓度按照24小时平均浓度计算的分指数报告。
		RETURN NULL;	
	END IF;
		
END IF;

#二氧化氮（NO2），单位：μg/m³
IF
param_factor_type ="二氧化氮" OR LOWER(param_factor_type) ="no2"
THEN 
	IF
		param_factor_value BETWEEN 0 AND 100
	THEN
		RETURN CEILING((50-0)/(100-0)*(param_factor_value-0)+0);
	ELSEIF
		param_factor_value BETWEEN 100 AND 200
	THEN
		RETURN CEILING((100-50)/(200-100)*(param_factor_value-100)+50);
	ELSEIF
		param_factor_value BETWEEN 200 AND 700
	THEN
		RETURN CEILING((150-100)/(700-200)*(param_factor_value-200)+100);
	ELSEIF
		param_factor_value BETWEEN 700 AND 1200
	THEN
		RETURN CEILING((200-150)/(1200-700)*(param_factor_value-700)+150);
	ELSEIF
		param_factor_value BETWEEN 1200 AND 2340
	THEN
		RETURN CEILING((300-200)/(2340-1200)*(param_factor_value-1200)+150);	
	ELSEIF
		param_factor_value BETWEEN 2340 AND 3090
	THEN
		RETURN CEILING((400-300)/(3090-2340)*(param_factor_value-2340)+150);
	ELSEIF
		param_factor_value BETWEEN 3090 AND 3840
	THEN
		RETURN CEILING((500-400)/(3840-3090)*(param_factor_value-3090)+150);
	ELSE
		RETURN NULL;
	END IF;
		
END IF;


#一氧化碳（CO），单位：mg/m³
IF
param_factor_type ="一氧化碳" OR LOWER(param_factor_type) ="co"
THEN 
	IF
		param_factor_value BETWEEN 0 AND 5
	THEN
		RETURN CEILING((50-0)/(5-0)*(param_factor_value-0)+0);
	ELSEIF
		param_factor_value BETWEEN 5 AND 10
	THEN
		RETURN CEILING((100-50)/(10-5)*(param_factor_value-5)+50);
	ELSEIF
		param_factor_value BETWEEN 10 AND 35
	THEN
		RETURN CEILING((150-100)/(35-10)*(param_factor_value-10)+100);
	ELSEIF
		param_factor_value BETWEEN 35 AND 60
	THEN
		RETURN CEILING((200-150)/(60-35)*(param_factor_value-35)+150);
	ELSEIF
		param_factor_value BETWEEN 60 AND 90
	THEN
		RETURN CEILING((300-200)/(90-60)*(param_factor_value-60)+150);	
	ELSEIF
		param_factor_value BETWEEN 90 AND 120
	THEN
		RETURN CEILING((400-300)/(120-90)*(param_factor_value-90)+150);
	ELSEIF
		param_factor_value BETWEEN 120 AND 150
	THEN
		RETURN CEILING((500-400)/(150-120)*(param_factor_value-120)+150);
	ELSE
		RETURN NULL;
	END IF;	
END IF;

#臭氧（O3），单位：μg/m³
IF
param_factor_type ="臭氧" OR LOWER(param_factor_type) ="o3"
THEN 
	IF
		param_factor_value BETWEEN 0 AND 160
	THEN
		RETURN CEILING((50-0)/(160-0)*(param_factor_value-0)+0);
	ELSEIF
		param_factor_value BETWEEN 160 AND 200
	THEN
		RETURN CEILING((100-50)/(200-160)*(param_factor_value-160)+50);
	ELSEIF
		param_factor_value BETWEEN 200 AND 300
	THEN
		RETURN CEILING((150-100)/(300-200)*(param_factor_value-200)+100);
	ELSEIF
		param_factor_value BETWEEN 300 AND 400
	THEN
		RETURN CEILING((200-150)/(400-300)*(param_factor_value-300)+150);
	ELSEIF
		param_factor_value BETWEEN 400 AND 800
	THEN
		RETURN CEILING((300-200)/(800-400)*(param_factor_value-400)+150);	
	ELSEIF
		param_factor_value BETWEEN 800 AND 1000
	THEN
		RETURN CEILING((400-300)/(1000-800)*(param_factor_value-800)+150);
	ELSEIF
		param_factor_value BETWEEN 1000 AND 1200
	THEN
		RETURN CEILING((500-400)/(1200-1000)*(param_factor_value-1000)+150);
	ELSE
		RETURN NULL;
	END IF;
	
END IF;
	
	
#PM2.5
IF
LOWER(param_factor_type) ="pm25" OR LOWER(param_factor_type) ="pm2.5"
THEN 
	IF
		param_factor_value BETWEEN 0 AND 35
	THEN
		RETURN CEILING((50-0)/(35-0)*(param_factor_value-0)+0);
	ELSEIF
		param_factor_value BETWEEN 35 AND 75
	THEN
		RETURN CEILING((100-50)/(75-35)*(param_factor_value-35)+50);
	ELSEIF
		param_factor_value BETWEEN 75 AND 115
	THEN
		RETURN CEILING((150-100)/(115-75)*(param_factor_value-75)+100);
	ELSEIF
		param_factor_value BETWEEN 115 AND 150
	THEN
		RETURN CEILING((200-150)/(150-115)*(param_factor_value-115)+150);
	ELSEIF
		param_factor_value BETWEEN 150 AND 250
	THEN
		RETURN CEILING((300-200)/(250-150)*(param_factor_value-150)+200);
	ELSEIF
		param_factor_value BETWEEN 250 AND 350
	THEN
		RETURN CEILING((400-300)/(350-250)*(param_factor_value-250)+300);
	ELSEIF
		param_factor_value BETWEEN 350 AND 500
	THEN
		RETURN CEILING((500-400)/(500-350)*(param_factor_value-350)+400);
	ELSE
		RETURN NULL;	
	END IF;
		
END IF;

#PM10
IF
LOWER(param_factor_type) ="pm10"
THEN 
	IF
		param_factor_value BETWEEN 0 AND 50
	THEN
		RETURN CEILING((50-0)/(50-0)*(param_factor_value-0)+0);
	ELSEIF
		param_factor_value BETWEEN 50 AND 150
	THEN
		RETURN CEILING((100-50)/(150-50)*(param_factor_value-50)+50);
	ELSEIF
		param_factor_value BETWEEN 150 AND 250
	THEN
		RETURN CEILING((150-100)/(250-150)*(param_factor_value-150)+100);
	ELSEIF
		param_factor_value BETWEEN 250 AND 350
	THEN
		RETURN CEILING((200-150)/(350-250)*(param_factor_value-250)+150);
	ELSEIF
		param_factor_value BETWEEN 350 AND 420
	THEN
		RETURN CEILING((300-200)/(420-350)*(param_factor_value-350)+200);
	ELSEIF
		param_factor_value BETWEEN 420 AND 500
	THEN
		RETURN CEILING((400-300)/(500-420)*(param_factor_value-420)+300);
	ELSEIF
		param_factor_value BETWEEN 500 AND 600
	THEN
		RETURN CEILING((500-400)/(600-500)*(param_factor_value-500)+400);
	ELSE
		RETURN NULL;	
	END IF;
	
END IF;
    END$$

DELIMITER ;

---

AQI函数

DELIMITER $$

USE `数据库名称`$$

DROP FUNCTION IF EXISTS `AQI_1H`$$

CREATE DEFINER=`登录账号`@`%` FUNCTION `AQI_1H`(
param_so2_value DECIMAL(10,5),
param_no2_value DECIMAL(10,5),
param_co_value DECIMAL(10,5),
param_o3_value DECIMAL(10,5),
param_pm25_value DECIMAL(10,5),
param_pm10_value DECIMAL(10,5)    
    ) RETURNS INT(5)
BEGIN
DECLARE aqi INT(5);


SELECT MAX(iaqi) INTO aqi FROM(
SELECT `IAQI_1H`("pm25",param_pm25_value)-0 iaqi
UNION ALL
SELECT `IAQI_1H`("pm10",param_pm10_value)-0
UNION ALL
SELECT `IAQI_1H`('o3',param_o3_value)-0 
UNION ALL
SELECT `IAQI_1H`('so2',param_so2_value)-0 
UNION ALL
SELECT `IAQI_1H`('no2',param_no2_value)-0 
UNION ALL
SELECT `IAQI_1H`('co',param_co_value) -0
)
a;
RETURN aqi;

    END$$

DELIMITER ;

调用测试

#o3iaqi=36
SELECT `IAQI_1H`('o3',114.00) o3iaqi
#so2iaqi=173
SELECT `IAQI_1H`('so2',718.92) so2iaqi
#no2iaqi=93
SELECT `IAQI_1H`('no2',186.00) no2iaqi
#coiaqi=26
SELECT `IAQI_1H`('co',2.600) coiaqi

#aqi=201
SELECT `AQI_1H`(17.00,87.00,1.500,15.00,151.00,220.00);