树人告诉你uv平板打印机飞墨的三大原因

随着uv平板打印机适用于各行各业，而机器也会出现某些问题，以前也和大家讲过关于墨水的问题例如：uv平板打印机断墨应当如何处理？，今天就和大家讲讲uv平板打印机飞墨出现原因和解决方法！As uv flat printer is suitable for all walks of life, and the machine will also have some problems, and we have talked about the ink problems before, such as: uv flat printer out of ink should be how to deal with? Today, I will tell you about the causes and solutions of uv flat printer flying ink!

一、喷头电压太高

uv打印机喷头板的指示灯显示的电压是否有亮红灯或报警，如果有这种情况，那么就需要降低喷头的电压；若是改装后的电路板卡，则需要变更相对应的电路，才能解决uv打印机打印时飞墨问题。

树人告诉你uv平板打印机飞墨的三大原因

原因二：打印时产生静电

uv打印机在打印时对室内的环境是极其敏感的，如果打印室内环境干燥、湿度过低等情况下，特别容易产生静电，这样会导致喷头与材料之间相互产生静电，造成uv平板打印机打印时出现飞墨。遇到静电问题，应在室内添加底线和静电棒，防止静电的产生。

原因三：喷头断线

喷头是uv打印机的最关键零件，如果在打印时出现飞墨，那么要检查一下喷头是否断线了，若出现喷头堵塞、发虚等情况，则需要小心清洗喷头的通道，使其保持运行畅通。www.ht-1688.com

原因四：喷头与打印材料间距不正确

uv打印机对材料的高度要求一般在10cm一下，喷头的不同喷射力也会有所区别，一般喷头与打印物体的间距在1mm-20mm之间为合适间距。若超过了喷头自身的喷射力范围，则会导致uv打印机在打印时出现飞墨现象。The height requirement of uv printer for materials is generally less than 10cm, and the spray force of nozzle is also different. Generally, the spacing between nozzle and printed object is 1mm-20mm, which is the appropriate spacing. If the nozzle itself beyond the range of jet force, it will lead to uv printer in the printing of the phenomenon of flying ink.