麒麟V10编译libgdiplus

最近有用户用到麒麟v10服务器系统,还是和之前一样libgdiplus不好用,调用绘图报gdi错误。为此自己安装了个v10的虚拟机编译libgdiplus。整个编译如下:

[BEGIN] 2023/6/13 11:04:43
[root@localhost giflib-code]# yum install xmlto
上次元数据过期检查:0:00:58 前,执行于 2023年06月13日 星期二 11时03分56秒。
软件包 xmlto-0.0.28-13.ky10.x86_64 已安装。
依赖关系解决。
无需任何处理。
完毕!
[root@localhost giflib-code]# make
make: ./getversion: 权限不够
make -C doc
make[1]: 进入目录“/源码/giflib-code/doc”
make[1]: 对“all”无需做任何事。
make[1]: 离开目录“/源码/giflib-code/doc”
[root@localhost giflib-code]# make clean
make: ./getversion: 权限不够
rm -f gif2rgb gifbuild giffix giftext giftool gifclrmp gifbg gifcolor gifecho giffilter gifhisto gifinto gifsponge gifwedge  libgetarg.a libgif.a libgif.so libutil.a libutil.so *.o
rm -f libgif.so.7.2.0
rm -f libgif.so.7
rm -fr doc/*.1 *.html doc/staging
[root@localhost giflib-code]# make
make: ./getversion: 权限不够
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2   -c -o dgif_lib.o dgif_lib.c
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2   -c -o egif_lib.o egif_lib.c
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2   -c -o gifalloc.o gifalloc.c
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2   -c -o gif_err.o gif_err.c
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2   -c -o gif_font.o gif_font.c
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2   -c -o gif_hash.o gif_hash.c
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2   -c -o openbsd-reallocarray.o openbsd-reallocarray.c
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2 -shared  -Wl,-soname -Wl,libgif.so.7 -o libgif.so dgif_lib.o egif_lib.o gifalloc.o gif_err.o gif_font.o gif_hash.o openbsd-reallocarray.o
ar rcs libgif.a dgif_lib.o egif_lib.o gifalloc.o gif_err.o gif_font.o gif_hash.o openbsd-reallocarray.o
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2   -c -o qprintf.o qprintf.c
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2   -c -o quantize.o quantize.c
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2   -c -o getarg.o getarg.c
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2 -shared  -Wl,-soname -Wl,libutil.so.7 -o libutil.so qprintf.o quantize.o getarg.o
ar rcs libutil.a qprintf.o quantize.o getarg.o
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2    gif2rgb.c libgif.a libutil.a  libgif.a -lm -o gif2rgb
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2    gifbuild.c libgif.a libutil.a  libgif.a -lm -o gifbuild
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2    giffix.c libgif.a libutil.a  libgif.a -lm -o giffix
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2    giftext.c libgif.a libutil.a  libgif.a -lm -o giftext
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2    giftool.c libgif.a libutil.a  libgif.a -lm -o giftool
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2    gifclrmp.c libgif.a libutil.a  libgif.a -lm -o gifclrmp
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2    gifbg.c libgif.a libutil.a  libgif.a -lm -o gifbg
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2    gifcolor.c libgif.a libutil.a  libgif.a -lm -o gifcolor
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2    gifecho.c libgif.a libutil.a  libgif.a -lm -o gifecho
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2    giffilter.c libgif.a libutil.a  libgif.a -lm -o giffilter
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2    gifhisto.c libgif.a libutil.a  libgif.a -lm -o gifhisto
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2    gifinto.c libgif.a libutil.a  libgif.a -lm -o gifinto
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2    gifsponge.c libgif.a libutil.a  libgif.a -lm -o gifsponge
cc -std=gnu99 -fPIC -Wall -Wno-format-truncation -O2    gifwedge.c libgif.a libutil.a  libgif.a -lm -o gifwedge
make -C doc
make[1]: 进入目录“/源码/giflib-code/doc”
xmlto man gif2rgb.xml
Note: Writing gif2rgb.1
xmlto man gifbuild.xml
Note: Writing gifbuild.1
xmlto man gifclrmp.xml
Note: Writing gifclrmp.1
xmlto man gifecho.xml
Note: Writing gifecho.1
xmlto man giffix.xml
Note: Writing giffix.1
xmlto man gifinto.xml
Note: Writing gifinto.1
xmlto man giflib.xml
Note: Writing giflib.1
xmlto man giftext.xml
Note: Writing giftext.1
xmlto man giftool.xml
Note: Writing giftool.1
xmlto man gifbg.xml
Note: Writing gifbg.1
xmlto man gifcolor.xml
Note: Writing gifcolor.1
xmlto man gifhisto.xml
Note: Writing gifhisto.1
xmlto man gifwedge.xml
Note: Writing gifwedge.1
make[1]: 离开目录“/源码/giflib-code/doc”
[root@localhost giflib-code]# make install
make: ./getversion: 权限不够
make -C doc
make[1]: 进入目录“/源码/giflib-code/doc”
make[1]: 对“all”无需做任何事。
make[1]: 离开目录“/源码/giflib-code/doc”
install -d "/usr/local/bin"
install gif2rgb gifbuild giffix giftext giftool gifclrmp "/usr/local/bin"
install -d "/usr/local/include"
install -m 644 gif_lib.h "/usr/local/include"
install -d "/usr/local/lib"
install -m 644 libgif.a "/usr/local/lib/libgif.a"
install -m 755 libgif.so "/usr/local/lib/libgif.so.7.2.0"
ln -sf libgif.so.7.2.0 "/usr/local/lib/libgif.so.7"
ln -sf libgif.so.7 "/usr/local/lib/libgif.so"
install -d "/usr/local/share/man/man1"
install -m 644 doc/*.1 "/usr/local/share/man/man1"
[root@localhost giflib-code]# yum -y install gcc automake autoconf libtool make
上次元数据过期检查:0:02:00 前,执行于 2023年06月13日 星期二 11时03分56秒。
软件包 gcc-7.3.0-20220207.45.ky10.x86_64 已安装。
软件包 automake-1.16.2-2.ky10.noarch 已安装。
软件包 autoconf-2.69-30.ky10.noarch 已安装。
软件包 libtool-2.4.6-33.ky10.x86_64 已安装。
软件包 make-1:4.3-1.ky10.x86_64 已安装。
依赖关系解决。
================================================================================================================================================================================================================================
 Package                                          Architecture                                  Version                                                           Repository                                               Size
================================================================================================================================================================================================================================
升级:
 cpp                                              x86_64                                        7.3.0-20220207.45.p01.ky10                                        ks10-adv-updates                                        8.1 M
 gcc                                              x86_64                                        7.3.0-20220207.45.p01.ky10                                        ks10-adv-updates                                         13 M
 libgomp                                          x86_64                                        7.3.0-20220207.45.p01.ky10                                        ks10-adv-updates                                        129 k
安装依赖关系:
 libasan                                          x86_64                                        7.3.0-20220207.45.p01.ky10                                        ks10-adv-updates                                        366 k
 libatomic                                        x86_64                                        7.3.0-20220207.45.p01.ky10                                        ks10-adv-updates                                         17 k
 libubsan                                         x86_64                                        7.3.0-20220207.45.p01.ky10                                        ks10-adv-updates                                        130 k

事务概要
================================================================================================================================================================================================================================
安装  3 软件包
升级  3 软件包

总下载:22 M
下载软件包:
(1/6): libatomic-7.3.0-20220207.45.p01.ky10.x86_64.rpm                                                                                                                                          270 kB/s |  17 kB     00:00    
(2/6): libasan-7.3.0-20220207.45.p01.ky10.x86_64.rpm                                                                                                                                            2.7 MB/s | 366 kB     00:00    
(3/6): libubsan-7.3.0-20220207.45.p01.ky10.x86_64.rpm                                                                                                                                           838 kB/s | 130 kB     00:00    
(4/6): libgomp-7.3.0-20220207.45.p01.ky10.x86_64.rpm                                                                                                                                            1.1 MB/s | 129 kB     00:00    
(5/6): cpp-7.3.0-20220207.45.p01.ky10.x86_64.rpm                                                                                                                                                651 kB/s | 8.1 MB     00:12    
(6/6): gcc-7.3.0-20220207.45.p01.ky10.x86_64.rpm                                                                                                                                                766 kB/s |  13 MB     00:17    
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
总计                                                                                                                                                                                            1.2 MB/s |  22 MB     00:17     
运行事务检查
事务检查成功。
运行事务测试
事务测试成功。
运行事务
  准备中  :                                                                                                                                                                                                                 1/1 
  升级    : libgomp-7.3.0-20220207.45.p01.ky10.x86_64                                                                                                                                                                       1/9 
  运行脚本: libgomp-7.3.0-20220207.45.p01.ky10.x86_64                                                                                                                                                                       1/9 
  升级    : cpp-7.3.0-20220207.45.p01.ky10.x86_64                                                                                                                                                                           2/9 
  运行脚本: cpp-7.3.0-20220207.45.p01.ky10.x86_64                                                                                                                                                                           2/9 
  安装    : libubsan-7.3.0-20220207.45.p01.ky10.x86_64                                                                                                                                                                      3/9 
  安装    : libatomic-7.3.0-20220207.45.p01.ky10.x86_64                                                                                                                                                                     4/9 
  安装    : libasan-7.3.0-20220207.45.p01.ky10.x86_64                                                                                                                                                                       5/9 
  升级    : gcc-7.3.0-20220207.45.p01.ky10.x86_64                                                                                                                                                                           6/9 
  运行脚本: gcc-7.3.0-20220207.45.p01.ky10.x86_64                                                                                                                                                                           6/9 
  运行脚本: gcc-7.3.0-20220207.45.ky10.x86_64                                                                                                                                                                               7/9 
  清理    : gcc-7.3.0-20220207.45.ky10.x86_64                                                                                                                                                                               7/9 
  运行脚本: cpp-7.3.0-20220207.45.ky10.x86_64                                                                                                                                                                               8/9 
  清理    : cpp-7.3.0-20220207.45.ky10.x86_64                                                                                                                                                                               8/9 
  运行脚本: libgomp-7.3.0-20220207.45.ky10.x86_64                                                                                                                                                                           9/9 
  清理    : libgomp-7.3.0-20220207.45.ky10.x86_64                                                                                                                                                                           9/9 
  运行脚本: libgomp-7.3.0-20220207.45.ky10.x86_64                                                                                                                                                                           9/9 
  验证    : libasan-7.3.0-20220207.45.p01.ky10.x86_64                                                                                                                                                                       1/9 
  验证    : libatomic-7.3.0-20220207.45.p01.ky10.x86_64                                                                                                                                                                     2/9 
  验证    : libubsan-7.3.0-20220207.45.p01.ky10.x86_64                                                                                                                                                                      3/9 
  验证    : cpp-7.3.0-20220207.45.p01.ky10.x86_64                                                                                                                                                                           4/9 
  验证    : cpp-7.3.0-20220207.45.ky10.x86_64                                                                                                                                                                               5/9 
  验证    : gcc-7.3.0-20220207.45.p01.ky10.x86_64                                                                                                                                                                           6/9 
  验证    : gcc-7.3.0-20220207.45.ky10.x86_64                                                                                                                                                                               7/9 
  验证    : libgomp-7.3.0-20220207.45.p01.ky10.x86_64                                                                                                                                                                       8/9 
  验证    : libgomp-7.3.0-20220207.45.ky10.x86_64                                                                                                                                                                           9/9 

已升级:
  cpp-7.3.0-20220207.45.p01.ky10.x86_64                                    gcc-7.3.0-20220207.45.p01.ky10.x86_64                                    libgomp-7.3.0-20220207.45.p01.ky10.x86_64                                   

已安装:
  libasan-7.3.0-20220207.45.p01.ky10.x86_64                                libatomic-7.3.0-20220207.45.p01.ky10.x86_64                                libubsan-7.3.0-20220207.45.p01.ky10.x86_64                               

完毕!
[root@localhost giflib-code]# yum -y install gcc-c++
上次元数据过期检查:0:07:19 前,执行于 2023年06月13日 星期二 11时03分56秒。
依赖关系解决。
================================================================================================================================================================================================================================
 Package                                              Architecture                                Version                                                           Repository                                             Size
================================================================================================================================================================================================================================
安装:
 gcc-c++                                              x86_64                                      7.3.0-20220207.45.p01.ky10                                        ks10-adv-updates                                      8.8 M
升级:
 libstdc++                                            x86_64                                      7.3.0-20220207.45.p01.ky10                                        ks10-adv-updates                                      401 k
安装依赖关系:
 libstdc++-devel                                      x86_64                                      7.3.0-20220207.45.p01.ky10                                        ks10-adv-updates                                      1.1 M

事务概要
================================================================================================================================================================================================================================
安装  2 软件包
升级  1 软件包

总下载:10 M
下载软件包:
(1/3): libstdc++-7.3.0-20220207.45.p01.ky10.x86_64.rpm                                                                                                                                          2.0 MB/s | 401 kB     00:00    
(2/3): libstdc++-devel-7.3.0-20220207.45.p01.ky10.x86_64.rpm                                                                                                                                    2.0 MB/s | 1.1 MB     00:00    
(3/3): gcc-c++-7.3.0-20220207.45.p01.ky10.x86_64.rpm                                                                                                                                            896 kB/s | 8.8 MB     00:10    
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
总计                                                                                                                                                                                            1.0 MB/s |  10 MB     00:10     
运行事务检查
事务检查成功。
运行事务测试
事务测试成功。
运行事务
  准备中  :                                                                                                                                                                                                                 1/1 
  升级    : libstdc++-7.3.0-20220207.45.p01.ky10.x86_64                                                                                                                                                                     1/4 
  运行脚本: libstdc++-7.3.0-20220207.45.p01.ky10.x86_64                                                                                                                                                                     1/4 
  安装    : libstdc++-devel-7.3.0-20220207.45.p01.ky10.x86_64                                                                                                                                                               2/4 
  安装    : gcc-c++-7.3.0-20220207.45.p01.ky10.x86_64                                                                                                                                                                       3/4 
  清理    : libstdc++-7.3.0-20220207.45.ky10.x86_64                                                                                                                                                                         4/4 
  运行脚本: libstdc++-7.3.0-20220207.45.ky10.x86_64                                                                                                                                                                         4/4 
  验证    : gcc-c++-7.3.0-20220207.45.p01.ky10.x86_64                                                                                                                                                                       1/4 
  验证    : libstdc++-devel-7.3.0-20220207.45.p01.ky10.x86_64                                                                                                                                                               2/4 
  验证    : libstdc++-7.3.0-20220207.45.p01.ky10.x86_64                                                                                                                                                                     3/4 
  验证    : libstdc++-7.3.0-20220207.45.ky10.x86_64                                                                                                                                                                         4/4 

已升级:
  libstdc++-7.3.0-20220207.45.p01.ky10.x86_64                                                                                                                                                                                   

已安装:
  gcc-c++-7.3.0-20220207.45.p01.ky10.x86_64                                                                  libstdc++-devel-7.3.0-20220207.45.p01.ky10.x86_64                                                                 

完毕!
[root@localhost giflib-code]# yum -y install zlib zlib-devel openssl openssl-devel pcre pcre-devel
上次元数据过期检查:0:07:46 前,执行于 2023年06月13日 星期二 11时03分56秒。
软件包 zlib-1.2.11-18.ky10.x86_64 已安装。
软件包 zlib-devel-1.2.11-18.ky10.x86_64 已安装。
软件包 openssl-1:1.1.1f-15.p05.ky10.x86_64 已安装。
软件包 openssl-devel-1:1.1.1f-15.p05.ky10.x86_64 已安装。
软件包 pcre-8.44-2.ky10.x86_64 已安装。
软件包 pcre-devel-8.44-2.ky10.x86_64 已安装。
依赖关系解决。
================================================================================================================================================================================================================================
 Package                                              Architecture                                  Version                                                       Repository                                               Size
================================================================================================================================================================================================================================
升级:
 minizip                                              x86_64                                        1.2.11-22.ky10                                                ks10-adv-updates                                         27 k
 openssl                                              x86_64                                        1:1.1.1f-15.p08.ky10                                          ks10-adv-updates                                        441 k
 openssl-devel                                        x86_64                                        1:1.1.1f-15.p08.ky10                                          ks10-adv-updates                                        1.8 M
 openssl-help                                         noarch                                        1:1.1.1f-15.p08.ky10                                          ks10-adv-updates                                        3.1 M
 openssl-libs                                         x86_64                                        1:1.1.1f-15.p08.ky10                                          ks10-adv-updates                                        1.4 M
 openssl-perl                                         x86_64                                        1:1.1.1f-15.p08.ky10                                          ks10-adv-updates                                         16 k
 zlib                                                 x86_64                                        1.2.11-22.ky10                                                ks10-adv-updates                                         87 k
 zlib-devel                                           x86_64                                        1.2.11-22.ky10                                                ks10-adv-updates                                         88 k

事务概要
================================================================================================================================================================================================================================
升级  8 软件包

总下载:6.9 M
下载软件包:
(1/8): minizip-1.2.11-22.ky10.x86_64.rpm                                                                                                                                                        168 kB/s |  27 kB     00:00    
(2/8): openssl-1.1.1f-15.p08.ky10.x86_64.rpm                                                                                                                                                    1.7 MB/s | 441 kB     00:00    
(3/8): openssl-libs-1.1.1f-15.p08.ky10.x86_64.rpm                                                                                                                                               336 kB/s | 1.4 MB     00:04    
(4/8): openssl-perl-1.1.1f-15.p08.ky10.x86_64.rpm                                                                                                                                               247 kB/s |  16 kB     00:00    
(5/8): zlib-1.2.11-22.ky10.x86_64.rpm                                                                                                                                                           1.0 MB/s |  87 kB     00:00    
(6/8): zlib-devel-1.2.11-22.ky10.x86_64.rpm                                                                                                                                                     1.6 MB/s |  88 kB     00:00    
(7/8): openssl-devel-1.1.1f-15.p08.ky10.x86_64.rpm                                                                                                                                              369 kB/s | 1.8 MB     00:04    
(8/8): openssl-help-1.1.1f-15.p08.ky10.noarch.rpm                                                                                                                                               452 kB/s | 3.1 MB     00:07    
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
总计                                                                                                                                                                                            973 kB/s | 6.9 MB     00:07     
运行事务检查
事务检查成功。
运行事务测试
事务测试成功。
运行事务
  准备中  :                                                                                                                                                                                                                 1/1 
  升级    : zlib-1.2.11-22.ky10.x86_64                                                                                                                                                                                     1/16 
  升级    : openssl-libs-1:1.1.1f-15.p08.ky10.x86_64                                                                                                                                                                       2/16 
  运行脚本: openssl-libs-1:1.1.1f-15.p08.ky10.x86_64                                                                                                                                                                       2/16 
  升级    : zlib-devel-1.2.11-22.ky10.x86_64                                                                                                                                                                               3/16 
  升级    : openssl-help-1:1.1.1f-15.p08.ky10.noarch                                                                                                                                                                       4/16 
  升级    : openssl-1:1.1.1f-15.p08.ky10.x86_64                                                                                                                                                                            5/16 
  升级    : openssl-perl-1:1.1.1f-15.p08.ky10.x86_64                                                                                                                                                                       6/16 
  升级    : openssl-devel-1:1.1.1f-15.p08.ky10.x86_64                                                                                                                                                                      7/16 
  升级    : minizip-1.2.11-22.ky10.x86_64                                                                                                                                                                                  8/16 
  清理    : openssl-devel-1:1.1.1f-15.p05.ky10.x86_64                                                                                                                                                                      9/16 
  清理    : minizip-1.2.11-18.ky10.x86_64                                                                                                                                                                                 10/16 
  清理    : zlib-devel-1.2.11-18.ky10.x86_64                                                                                                                                                                              11/16 
  清理    : openssl-perl-1:1.1.1f-15.p05.ky10.x86_64                                                                                                                                                                      12/16 
  清理    : openssl-1:1.1.1f-15.p05.ky10.x86_64                                                                                                                                                                           13/16 
  清理    : openssl-help-1:1.1.1f-15.p05.ky10.noarch                                                                                                                                                                      14/16 
  清理    : openssl-libs-1:1.1.1f-15.p05.ky10.x86_64                                                                                                                                                                      15/16 
  运行脚本: openssl-libs-1:1.1.1f-15.p05.ky10.x86_64                                                                                                                                                                      15/16 
  清理    : zlib-1.2.11-18.ky10.x86_64                                                                                                                                                                                    16/16 
  运行脚本: zlib-1.2.11-18.ky10.x86_64                                                                                                                                                                                    16/16 
  验证    : minizip-1.2.11-22.ky10.x86_64                                                                                                                                                                                  1/16 
  验证    : minizip-1.2.11-18.ky10.x86_64                                                                                                                                                                                  2/16 
  验证    : openssl-1:1.1.1f-15.p08.ky10.x86_64                                                                                                                                                                            3/16 
  验证    : openssl-1:1.1.1f-15.p05.ky10.x86_64                                                                                                                                                                            4/16 
  验证    : openssl-devel-1:1.1.1f-15.p08.ky10.x86_64                                                                                                                                                                      5/16 
  验证    : openssl-devel-1:1.1.1f-15.p05.ky10.x86_64                                                                                                                                                                      6/16 
  验证    : openssl-help-1:1.1.1f-15.p08.ky10.noarch                                                                                                                                                                       7/16 
  验证    : openssl-help-1:1.1.1f-15.p05.ky10.noarch                                                                                                                                                                       8/16 
  验证    : openssl-libs-1:1.1.1f-15.p08.ky10.x86_64                                                                                                                                                                       9/16 
  验证    : openssl-libs-1:1.1.1f-15.p05.ky10.x86_64                                                                                                                                                                      10/16 
  验证    : openssl-perl-1:1.1.1f-15.p08.ky10.x86_64                                                                                                                                                                      11/16 
  验证    : openssl-perl-1:1.1.1f-15.p05.ky10.x86_64                                                                                                                                                                      12/16 
  验证    : zlib-1.2.11-22.ky10.x86_64                                                                                                                                                                                    13/16 
  验证    : zlib-1.2.11-18.ky10.x86_64                                                                                                                                                                                    14/16 
  验证    : zlib-devel-1.2.11-22.ky10.x86_64                                                                                                                                                                              15/16 
  验证    : zlib-devel-1.2.11-18.ky10.x86_64                                                                                                                                                                              16/16 

已升级:
  minizip-1.2.11-22.ky10.x86_64                openssl-1:1.1.1f-15.p08.ky10.x86_64     openssl-devel-1:1.1.1f-15.p08.ky10.x86_64     openssl-help-1:1.1.1f-15.p08.ky10.noarch     openssl-libs-1:1.1.1f-15.p08.ky10.x86_64    
  openssl-perl-1:1.1.1f-15.p08.ky10.x86_64     zlib-1.2.11-22.ky10.x86_64              zlib-devel-1.2.11-22.ky10.x86_64             

完毕!
[root@localhost giflib-code]# yum install -y autoconf automake libtool
上次元数据过期检查:0:08:25 前,执行于 2023年06月13日 星期二 11时03分56秒。
软件包 autoconf-2.69-30.ky10.noarch 已安装。
软件包 automake-1.16.2-2.ky10.noarch 已安装。
软件包 libtool-2.4.6-33.ky10.x86_64 已安装。
依赖关系解决。
无需任何处理。
完毕!
[root@localhost giflib-code]# yum install -y freetype-devel fontconfig libXft-devel
上次元数据过期检查:0:08:36 前,执行于 2023年06月13日 星期二 11时03分56秒。
软件包 freetype-devel-2.10.2-3.ky10.x86_64 已安装。
软件包 fontconfig-2.13.92-1.ky10.x86_64 已安装。
软件包 libXft-devel-2.3.3-1.ky10.x86_64 已安装。
依赖关系解决。
无需任何处理。
完毕!
[root@localhost giflib-code]# yum install -y libjpeg-turbo-devel libpng-devel giflib-devel libtiff-devel libexif-devel
上次元数据过期检查:0:08:45 前,执行于 2023年06月13日 星期二 11时03分56秒。
软件包 libpng-devel-2:1.6.37-1.ky10.x86_64 已安装。
软件包 libtiff-devel-4.3.0-4.ky10.x86_64 已安装。
依赖关系解决。
================================================================================================================================================================================================================================
 Package                                                    Architecture                                  Version                                                 Repository                                               Size
================================================================================================================================================================================================================================
安装:
 giflib-devel                                               x86_64                                        5.2.1-3.ky10                                            ks10-adv-updates                                        199 k
 libexif-devel                                              x86_64                                        0.6.21-23.ky10                                          ks10-adv-os                                              93 k
 libjpeg-turbo-devel                                        x86_64                                        2.0.5-3.ky10                                            ks10-adv-os                                             115 k
升级:
 giflib                                                     x86_64                                        5.2.1-3.ky10                                            ks10-adv-updates                                         44 k

事务概要
================================================================================================================================================================================================================================
安装  3 软件包
升级  1 软件包

总下载:451 k
下载软件包:
(1/4): libjpeg-turbo-devel-2.0.5-3.ky10.x86_64.rpm                                                                                                                                              2.0 MB/s | 115 kB     00:00    
(2/4): giflib-5.2.1-3.ky10.x86_64.rpm                                                                                                                                                           1.9 MB/s |  44 kB     00:00    
(3/4): libexif-devel-0.6.21-23.ky10.x86_64.rpm                                                                                                                                                  1.1 MB/s |  93 kB     00:00    
(4/4): giflib-devel-5.2.1-3.ky10.x86_64.rpm                                                                                                                                                     1.7 MB/s | 199 kB     00:00    
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
总计                                                                                                                                                                                            3.6 MB/s | 451 kB     00:00     
运行事务检查
事务检查成功。
运行事务测试
事务测试成功。
运行事务
  准备中  :                                                                                                                                                                                                                 1/1 
  升级    : giflib-5.2.1-3.ky10.x86_64                                                                                                                                                                                      1/5 
  安装    : giflib-devel-5.2.1-3.ky10.x86_64                                                                                                                                                                                2/5 
  安装    : libjpeg-turbo-devel-2.0.5-3.ky10.x86_64                                                                                                                                                                         3/5 
  安装    : libexif-devel-0.6.21-23.ky10.x86_64                                                                                                                                                                             4/5 
  清理    : giflib-5.2.1-2.ky10.x86_64                                                                                                                                                                                      5/5 
  运行脚本: giflib-5.2.1-2.ky10.x86_64                                                                                                                                                                                      5/5 
  验证    : libexif-devel-0.6.21-23.ky10.x86_64                                                                                                                                                                             1/5 
  验证    : libjpeg-turbo-devel-2.0.5-3.ky10.x86_64                                                                                                                                                                         2/5 
  验证    : giflib-devel-5.2.1-3.ky10.x86_64                                                                                                                                                                                3/5 
  验证    : giflib-5.2.1-3.ky10.x86_64                                                                                                                                                                                      4/5 
  验证    : giflib-5.2.1-2.ky10.x86_64                                                                                                                                                                                      5/5 

已升级:
  giflib-5.2.1-3.ky10.x86_64                                                                                                                                                                                                    

已安装:
  giflib-devel-5.2.1-3.ky10.x86_64                                       libexif-devel-0.6.21-23.ky10.x86_64                                       libjpeg-turbo-devel-2.0.5-3.ky10.x86_64                                      

完毕!
[root@localhost giflib-code]# yum install -y glib2-devel cairo-devel 
上次元数据过期检查:0:08:56 前,执行于 2023年06月13日 星期二 11时03分56秒。
软件包 glib2-devel-2.66.8-5.p01.ky10.x86_64 已安装。
软件包 cairo-devel-1.16.0-4.ky10.x86_64 已安装。
依赖关系解决。
无需任何处理。
完毕!
[root@localhost giflib-code]# yum install -y pango-devel
上次元数据过期检查:0:09:05 前,执行于 2023年06月13日 星期二 11时03分56秒。
软件包 pango-devel-1.43.0-3.ky10.x86_64 已安装。
依赖关系解决。
无需任何处理。
完毕!
[root@localhost giflib-code]# yum install giflib
上次元数据过期检查:0:09:13 前,执行于 2023年06月13日 星期二 11时03分56秒。
软件包 giflib-5.2.1-3.ky10.x86_64 已安装。
依赖关系解决。
无需任何处理。
完毕!
[root@localhost giflib-code]# yum install libexif
上次元数据过期检查:0:09:21 前,执行于 2023年06月13日 星期二 11时03分56秒。
软件包 libexif-0.6.21-23.ky10.x86_64 已安装。
依赖关系解决。
无需任何处理。
完毕!
[root@localhost giflib-code]# cd ..
[root@localhost 源码]# cd gdiplus/
[root@localhost gdiplus]# ls
install.sh  libgdiplus  libgdiplus-2.10-10.el7.x86_64.rpm
[root@localhost gdiplus]# cd libgdiplus
[root@localhost libgdiplus]# ls
aclocal.m4  autom4te.cache      config.guess  config.log     configure     depcomp   INSTALL           libgdiplus0.spec.in  libgdiplus.sln  ltmain.sh  Makefile.am  NEWS       stamp-h1     TODO
AUTHORS     ChangeLog           config.h      config.status  configure.ac  docs      install-sh        libgdiplus.pc        libtool         m4         Makefile.in  README.md  test-driver  update_submodules.sh
autogen.sh  CODE-OF-CONDUCT.md  config.h.in   config.sub     COPYING       external  libgdiplus0.spec  libgdiplus.pc.in     LICENSE         Makefile   missing      src        tests        winconfig.h.in
[root@localhost libgdiplus]# chmod +x autogen.sh
[root@localhost libgdiplus]# chmod +x configure
[root@localhost libgdiplus]# ./autogen.sh  --with-pango
Running libtoolize...
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
Running aclocal  ...
Running autoheader...
Running automake --gnu  ...
configure.ac:13: installing './compile'
configure.ac:9: installing './missing'
src/Makefile.am: installing './depcomp'
Running autoconf ...
Running ./configure --enable-maintainer-mode --with-pango ...
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether UID '0' is supported by ustar format... yes
checking whether GID '0' is supported by ustar format... yes
checking how to create a ustar tar archive... gnutar
checking whether to enable maintainer-specific portions of Makefiles... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of g++... gcc3
checking how to print strings... printf
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... no
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether make supports nested variables... (cached) yes
checking whether byte ordering is bigendian... no
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for BASE_DEPENDENCIES... yes
checking for cmake... /usr/bin/cmake
checking for CAIRO... yes
checking for PANGO... yes
checking for FONTCONFIG... yes
checking for FcInit in -lfontconfig... yes
checking for FcFini... yes
checking for FREETYPE2... yes
checking byteswap.h usability... yes
checking byteswap.h presence... yes
checking for byteswap.h... yes
checking for library containing sqrt... -lm
checking host threading settings... checking for pthread_create in -lpthread... yes
checking if compiler recognizes -pthread... yes
checking for sigsetjmp... yes
checking for visibility __attribute__... yes
checking for jpeg_destroy_decompress in -ljpeg... yes
checking for jpeglib.h... yes
checking for TIFFReadScanline in -ltiff... yes
checking tiffio.h usability... yes
checking tiffio.h presence... yes
checking for tiffio.h... yes
checking for DGifOpenFileName in -lgif... yes
checking gif_lib.h usability... yes
checking gif_lib.h presence... yes
checking for gif_lib.h... yes
checking for DGifOpenFileName in -lungif... no
configure: WARNING: *** GIF loader will not be built (ungiflibrary not found) ***
checking for libpng16... yes
checking X11 support... yes
checking for LIBEXIF... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating libgdiplus.pc
config.status: creating libgdiplus0.spec
config.status: creating src/Makefile
config.status: creating tests/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
---
Configuration summary

   * Installation prefix = /usr/local
   * Cairo = 1.16.0 (system)
   * Text = pango
   * EXIF tags = yes
   * X11 = yes
   * Codecs supported:

      - TIFF: yes
      - JPEG: yes
      - GIF: yes
      - PNG: yes

      NOTE: if any of the above say 'no' you may install the
            corresponding development packages for them, rerun
            autogen.sh to include them in the build.

---
Now type `make' to compile
[root@localhost libgdiplus]# make
/bin/sh: ./update_submodules.sh: 权限不够
make: *** [Makefile:920:update_submodules] 错误 126
[root@localhost libgdiplus]# chmod +x  ./update_submodules.sh
[root@localhost libgdiplus]# make
make  all-recursive
make[1]: 进入目录“/源码/gdiplus/libgdiplus”
Making all in src
make[2]: 进入目录“/源码/gdiplus/libgdiplus/src”
  CC       adjustablearrowcap.lo
  CC       bitmap.lo
  CC       brush.lo
  CC       carbon-private.lo
  CC       customlinecap.lo
  CC       dstream.lo
  CC       font.lo
  CC       gdi32.lo
  CC       general.lo
  CC       graphics.lo
  CC       graphics-cairo.lo
  CC       graphics-metafile.lo
  CC       graphics-path.lo
  CC       graphics-pathiterator.lo
  CC       hatchbrush.lo
  CC       icocodec.lo
  CC       image.lo
  CC       imageattributes.lo
  CC       lineargradientbrush.lo
  CC       matrix.lo
  CC       metafile.lo
  CC       pathgradientbrush.lo
  CC       pen.lo
  CC       print.lo
  CC       region.lo
  CC       region-bitmap.lo
  CC       region-path-tree.lo
  CC       solidbrush.lo
  CC       stringformat.lo
  CC       text.lo
  CC       text-metafile.lo
  CC       texturebrush.lo
  CC       bmpcodec.lo
  CC       emfcodec.lo
  CC       emfplus.lo
  CC       gifcodec.lo
  CC       jpegcodec.lo
jpegcodec.c: 在函数‘gdip_load_jpeg_image_internal’中:
jpegcodec.c:275:12: 警告:变量‘result’能为‘longjmp’或‘vfork’所篡改 [-Wclobbered]
  GpBitmap *result;
            ^~~~~~
jpegcodec.c: 在函数‘gdip_save_jpeg_image_internal’中:
jpegcodec.c:714:32: 警告:变量‘dest’能为‘longjmp’或‘vfork’所篡改 [-Wclobbered]
  gdip_stream_jpeg_dest_mgr_ptr dest = NULL;
                                ^~~~
jpegcodec.c:719:7: 警告:变量‘need_argb_conversion’能为‘longjmp’或‘vfork’所篡改 [-Wclobbered]
  int  need_argb_conversion = 0;
       ^~~~~~~~~~~~~~~~~~~~
  CC       pngcodec.lo
pngcodec.c: 在函数‘gdip_load_png_image_from_file_or_stream’中:
pngcodec.c:250:9: 警告:变量‘rawdata’能为‘longjmp’或‘vfork’所篡改 [-Wclobbered]
  BYTE  *rawdata = NULL;
         ^~~~~~~
pngcodec.c:251:12: 警告:变量‘result’能为‘longjmp’或‘vfork’所篡改 [-Wclobbered]
  GpImage  *result = NULL;
            ^~~~~~
pngcodec.c:252:11: 警告:变量‘status’能为‘longjmp’或‘vfork’所篡改 [-Wclobbered]
  GpStatus status = OutOfMemory;
           ^~~~~~
  CC       tiffcodec.lo
  CC       wmfcodec.lo
  CC       text-pango.lo
  CCLD     libgdiplus.la
make[2]: 离开目录“/源码/gdiplus/libgdiplus/src”
Making all in tests
make[2]: 进入目录“/源码/gdiplus/libgdiplus/tests”
  CC       testadjustablearrowcap.o
  CCLD     testadjustablearrowcap
  CC       testbitmap.o
  CCLD     testbitmap
  CC       testbits.o
  CCLD     testbits
  CC       testbmpcodec.o
  CCLD     testbmpcodec
  CC       testbrush.o
  CCLD     testbrush
  CC       testclip.o
  CCLD     testclip
  CC       testcodecs.o
  CCLD     testcodecs
  CC       testcustomlinecap.o
  CCLD     testcustomlinecap
  CC       testemfcodec.o
  CCLD     testemfcodec
  CC       testfont.o
  CCLD     testfont
  CC       testgeneral.o
  CCLD     testgeneral
  CC       testgifcodec.o
  CCLD     testgifcodec
  CC       testgpimage.o
  CCLD     testgpimage
  CC       testgraphics.o
  CCLD     testgraphics
  CC       testgraphicsdraw.o
  CCLD     testgraphicsdraw
  CC       testgraphicsfill.o
  CCLD     testgraphicsfill
  CC       testgraphicspath.o
  CCLD     testgraphicspath
  CC       testhatchbrush.o
  CCLD     testhatchbrush
  CC       testicocodec.o
  CCLD     testicocodec
  CC       testimageattributes.o
  CCLD     testimageattributes
  CC       testlineargradientbrush.o
  CCLD     testlineargradientbrush
  CC       testmatrix.o
  CCLD     testmatrix
  CC       testmetafile.o
  CCLD     testmetafile
  CC       testpathgradientbrush.o
  CCLD     testpathgradientbrush
  CC       testpen.o
  CCLD     testpen
  CC       testpng.o
  CCLD     testpng
  CC       testpngcodec.o
  CCLD     testpngcodec
  CC       testregion.o
  CCLD     testregion
  CC       testreversepath.o
  CCLD     testreversepath
  CC       testsolidbrush.o
  CCLD     testsolidbrush
  CC       teststringformat.o
  CCLD     teststringformat
  CC       testtext.o
  CCLD     testtext
  CC       testtexturebrush.o
  CCLD     testtexturebrush
  CC       testwmfcodec.o
  CCLD     testwmfcodec
  CC       testjpegcodec.o
  CCLD     testjpegcodec
  CC       testtiffcodec.o
  CCLD     testtiffcodec
  CXX      gtest-gtest.o
mkdir -p ../gtest_build
cd ../gtest_build && /usr/bin/cmake . ../external/googletest && make
-- The C compiler identification is GNU 7.3.0
-- The CXX compiler identification is GNU 7.3.0
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Found PythonInterp: /usr/bin/python (found version "2.7.18") 
-- Looking for pthread.h
-- Looking for pthread.h - found
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Failed
-- Looking for pthread_create in pthreads
-- Looking for pthread_create in pthreads - not found
-- Looking for pthread_create in pthread
-- Looking for pthread_create in pthread - found
-- Found Threads: TRUE  
-- Configuring done
-- Generating done
-- Build files have been written to: /源码/gdiplus/libgdiplus/gtest_build
make[3]: 进入目录“/源码/gdiplus/libgdiplus/gtest_build”
make[4]: 进入目录“/源码/gdiplus/libgdiplus/gtest_build”
make[5]: 进入目录“/源码/gdiplus/libgdiplus/gtest_build”
Scanning dependencies of target gtest
make[5]: 离开目录“/源码/gdiplus/libgdiplus/gtest_build”
make[5]: 进入目录“/源码/gdiplus/libgdiplus/gtest_build”
[ 12%] Building CXX object googletest/CMakeFiles/gtest.dir/src/gtest-all.cc.o
[ 25%] Linking CXX static library ../lib/libgtest.a
make[5]: 离开目录“/源码/gdiplus/libgdiplus/gtest_build”
[ 25%] Built target gtest
make[5]: 进入目录“/源码/gdiplus/libgdiplus/gtest_build”
Scanning dependencies of target gmock
make[5]: 离开目录“/源码/gdiplus/libgdiplus/gtest_build”
make[5]: 进入目录“/源码/gdiplus/libgdiplus/gtest_build”
[ 37%] Building CXX object googlemock/CMakeFiles/gmock.dir/src/gmock-all.cc.o
[ 50%] Linking CXX static library ../lib/libgmock.a
make[5]: 离开目录“/源码/gdiplus/libgdiplus/gtest_build”
[ 50%] Built target gmock
make[5]: 进入目录“/源码/gdiplus/libgdiplus/gtest_build”
Scanning dependencies of target gmock_main
make[5]: 离开目录“/源码/gdiplus/libgdiplus/gtest_build”
make[5]: 进入目录“/源码/gdiplus/libgdiplus/gtest_build”
[ 62%] Building CXX object googlemock/CMakeFiles/gmock_main.dir/src/gmock_main.cc.o
[ 75%] Linking CXX static library ../lib/libgmock_main.a
make[5]: 离开目录“/源码/gdiplus/libgdiplus/gtest_build”
[ 75%] Built target gmock_main
make[5]: 进入目录“/源码/gdiplus/libgdiplus/gtest_build”
Scanning dependencies of target gtest_main
make[5]: 离开目录“/源码/gdiplus/libgdiplus/gtest_build”
make[5]: 进入目录“/源码/gdiplus/libgdiplus/gtest_build”
[ 87%] Building CXX object googletest/CMakeFiles/gtest_main.dir/src/gtest_main.cc.o
[100%] Linking CXX static library ../lib/libgtest_main.a
make[5]: 离开目录“/源码/gdiplus/libgdiplus/gtest_build”
[100%] Built target gtest_main
make[4]: 离开目录“/源码/gdiplus/libgdiplus/gtest_build”
make[3]: 离开目录“/源码/gdiplus/libgdiplus/gtest_build”
touch ../gtest_build/.stamp-gtest
  CXXLD    gtest
make[2]: 离开目录“/源码/gdiplus/libgdiplus/tests”
make[2]: 进入目录“/源码/gdiplus/libgdiplus”
make[2]: 离开目录“/源码/gdiplus/libgdiplus”
make[1]: 离开目录“/源码/gdiplus/libgdiplus”
[root@localhost libgdiplus]# make install
Making install in src
make[1]: 进入目录“/源码/gdiplus/libgdiplus/src”
make[2]: 进入目录“/源码/gdiplus/libgdiplus/src”
 /usr/bin/mkdir -p '/usr/local/lib'
 /bin/sh ../libtool   --mode=install /usr/bin/install -c   libgdiplus.la '/usr/local/lib'
libtool: install: /usr/bin/install -c .libs/libgdiplus.so.0.0.0 /usr/local/lib/libgdiplus.so.0.0.0
libtool: install: (cd /usr/local/lib && { ln -s -f libgdiplus.so.0.0.0 libgdiplus.so.0 || { rm -f libgdiplus.so.0 && ln -s libgdiplus.so.0.0.0 libgdiplus.so.0; }; })
libtool: install: (cd /usr/local/lib && { ln -s -f libgdiplus.so.0.0.0 libgdiplus.so || { rm -f libgdiplus.so && ln -s libgdiplus.so.0.0.0 libgdiplus.so; }; })
libtool: install: /usr/bin/install -c .libs/libgdiplus.lai /usr/local/lib/libgdiplus.la
libtool: install: /usr/bin/install -c .libs/libgdiplus.a /usr/local/lib/libgdiplus.a
libtool: install: chmod 644 /usr/local/lib/libgdiplus.a
libtool: install: ranlib /usr/local/lib/libgdiplus.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/root/bin:/root/bin:/sbin" ldconfig -n /usr/local/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /usr/local/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the '-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: 对“install-data-am”无需做任何事。
make[2]: 离开目录“/源码/gdiplus/libgdiplus/src”
make[1]: 离开目录“/源码/gdiplus/libgdiplus/src”
Making install in tests
make[1]: 进入目录“/源码/gdiplus/libgdiplus/tests”
make[2]: 进入目录“/源码/gdiplus/libgdiplus/tests”
make[2]: 对“install-exec-am”无需做任何事。
make[2]: 对“install-data-am”无需做任何事。
make[2]: 离开目录“/源码/gdiplus/libgdiplus/tests”
make[1]: 离开目录“/源码/gdiplus/libgdiplus/tests”
make[1]: 进入目录“/源码/gdiplus/libgdiplus”
make[2]: 进入目录“/源码/gdiplus/libgdiplus”
make[2]: 对“install-exec-am”无需做任何事。
 /usr/bin/mkdir -p '/usr/local/lib/pkgconfig'
 /usr/bin/install -c -m 644 libgdiplus.pc '/usr/local/lib/pkgconfig'
make[2]: 离开目录“/源码/gdiplus/libgdiplus”
make[1]: 离开目录“/源码/gdiplus/libgdiplus”
[root@localhost libgdiplus]# ^C
[root@localhost libgdiplus]# 
[root@localhost libgdiplus]# 
[root@localhost libgdiplus]# cd /testdraw/
[root@localhost testdraw]# ls
测试命令参考.txt  gif.gif  lisdrawtest.deps.json  lisdrawtest.exe  lisdrawtest.runtimeconfig.dev.json  Microsoft.Win32.SystemEvents.dll  runtimes
bmp.bmp           jpg.jpg  lisdrawtest.dll        lisdrawtest.pdb  lisdrawtest.runtimeconfig.json      ref                               System.Drawing.Common.dll
[root@localhost testdraw]# 
[root@localhost testdraw]# 
[root@localhost testdraw]# 
[root@localhost testdraw]# 
[root@localhost testdraw]# yum install dotnet-sdk-5.0
上次元数据过期检查:0:21:18 前,执行于 2023年06月13日 星期二 11时03分56秒。
未找到匹配的参数: dotnet-sdk-5.0
错误:没有任何匹配: dotnet-sdk-5.0
[root@localhost testdraw]# yum list | grep dotnet
dotnet.x86_64                                           3.1.103-2.p01.ky10                     ks10-adv-os      
dotnet-apphost-pack-3.1.x86_64                          3.1.3-2.p01.ky10                       ks10-adv-os      
dotnet-host.x86_64                                      3.1.3-2.p01.ky10                       ks10-adv-os      
dotnet-hostfxr-3.1.x86_64                               3.1.3-2.p01.ky10                       ks10-adv-os      
dotnet-runtime-3.1.x86_64                               3.1.3-2.p01.ky10                       ks10-adv-os      
dotnet-sdk-3.1.x86_64                                   3.1.103-2.p01.ky10                     ks10-adv-os      
dotnet-targeting-pack-3.1.x86_64                        3.1.3-2.p01.ky10                       ks10-adv-os      
dotnet-templates-3.1.x86_64                             3.1.103-2.p01.ky10                     ks10-adv-os      
[root@localhost testdraw]# bash /dotnet/install.sh
没安装dotnet,进行离线安装
[root@localhost testdraw]# dotnet

Usage: dotnet [options]
Usage: dotnet [path-to-application]

Options:
  -h|--help         Display help.
  --info            Display .NET information.
  --list-sdks       Display the installed SDKs.
  --list-runtimes   Display the installed runtimes.

path-to-application:
  The path to an application .dll file to execute.
[root@localhost testdraw]# 
[root@localhost testdraw]# 
[root@localhost testdraw]# 
[root@localhost testdraw]# dotnet lisdrawtest.dll
此程序为imedicallis提供用于测试linux下dotnetcore绘图环境
创建位图
Unhandled exception. System.TypeInitializationException: The type initializer for 'Gdip' threw an exception.
open shared object file: No such file or directory
   at System.Drawing.SafeNativeMethods.Gdip.GdiplusStartup(IntPtr& token, StartupInput& input, StartupOutput& output)
   at System.Drawing.SafeNativeMethods.Gdip..cctor()
   --- End of inner exception stack trace ---
   at System.Drawing.SafeNativeMethods.Gdip.GdipCreateBitmapFromScan0(Int32 width, Int32 height, Int32 stride, Int32 format, IntPtr scan0, IntPtr& bitmap)
   at System.Drawing.Bitmap..ctor(Int32 width, Int32 height, PixelFormat format)
   at System.Drawing.Bitmap..ctor(Int32 width, Int32 height)
   at lisdrawtest.Program.Main(String[] args) in D:\检验代码\trunk\13开发库\Common\Tools\lisdrawtest\Program.cs:line 16
已放弃 (核心已转储)
[root@localhost testdraw]# 
[root@localhost testdraw]# 
[root@localhost testdraw]# cd /kylinserverv10/
[root@localhost kylinserverv10]# ls
lislibgdiplus
[root@localhost kylinserverv10]# bash /kylinserverv10/lislibgdiplus/install.sh
安装libgdiplus完成
[root@localhost kylinserverv10]# 
[root@localhost kylinserverv10]# 
[root@localhost kylinserverv10]# cd /testdraw/
[root@localhost testdraw]# ls
测试命令参考.txt  gif.gif  lisdrawtest.deps.json  lisdrawtest.exe  lisdrawtest.runtimeconfig.dev.json  Microsoft.Win32.SystemEvents.dll  runtimes
bmp.bmp           jpg.jpg  lisdrawtest.dll        lisdrawtest.pdb  lisdrawtest.runtimeconfig.json      ref                               System.Drawing.Common.dll
[root@localhost testdraw]# dotnet lisdrawtest.dll
此程序为imedicallis提供用于测试linux下dotnetcore绘图环境
创建位图
创建画笔
填充白色
创建Pen
画一条竖线
画一条横线
创建字体
创建画刷
绘制字符串
保存文件到:/testdraw/lisdrawtest.bmp
测试完成,如果成功生成图片那么环境可用

[END] 2023/6/13 11:33:44

先编译giflib,再编译libgdiplus得到下图库:
麒麟V10编译libgdiplus_第1张图片

用编译的so做install脚本

#!/bin/bash
#shell一键安装gdiplus
#20210704
#zlz
#----------------------------------------------------------
mypath=$(dirname $0)
mkdir /usr/share/libgdiplus
cp -r ${mypath}/libs/*  /usr/share/libgdiplus/
cd /usr/lib64/
rm -f libgdiplus.so
chmod +x /usr/share/libgdiplus/libgdiplus.so
ln -s /usr/share/libgdiplus/libgdiplus.so libgdiplus.so
echo "安装libgdiplus完成"

再用之前C#的画图测试程序测试环境

[root@localhost kylinserverv10]# bash /kylinserverv10/lislibgdiplus/install.sh
安装libgdiplus完成
[root@localhost kylinserverv10]# 
[root@localhost kylinserverv10]# 
[root@localhost kylinserverv10]# cd /testdraw/
[root@localhost testdraw]# ls
测试命令参考.txt  gif.gif  lisdrawtest.deps.json  lisdrawtest.exe  lisdrawtest.runtimeconfig.dev.json  Microsoft.Win32.SystemEvents.dll  runtimes
bmp.bmp           jpg.jpg  lisdrawtest.dll        lisdrawtest.pdb  lisdrawtest.runtimeconfig.json      ref                               System.Drawing.Common.dll
[root@localhost testdraw]# dotnet lisdrawtest.dll
此程序为imedicallis提供用于测试linux下dotnetcore绘图环境
创建位图
创建画笔
填充白色
创建Pen
画一条竖线
画一条横线
创建字体
创建画刷
绘制字符串
保存文件到:/testdraw/lisdrawtest.bmp
测试完成,如果成功生成图片那么环境可用

绘图在麒麟V10上ok

你可能感兴趣的:(服务器,linux,c#)