Windows驱动_WFP之四WFP代码基本流程的剖析
总说程序员是孤独的，因为，大部分的时间都在和机器打交道。大部分的时间都在自言自语。我的内心需要足够的强大。这种强大时建立的自信的基础上的。而自信又是建立在实力基础上的。实力又是建立在积累的基础上。积累又是建立在时间的基础上。所以归根结底，就是，需要花费更多的时间。第二，需要有足够的兴趣爱好。这两点对于现在的我来说，都有。既然，自己选择了这条路，就应该义无反顾的走下去，坚持的走下去。孤独，我不怕，困难，我也不怕，永远向上的动力，爱好，对知识的渴望，支持者我。相信自己，相信明天。
今天实际看一下，WFP的Callout驱动的代码。先从DriverEntry开始：
1，在DriverEntry需要创建驱动对象和设备对象，
1.1 由于不是PNP设备，需要设置创建驱动对象的标志为config.DriverInitFlags |= WdfDriverInitNonPnpDriver.
1.2 调用WdfDriverCreate创建驱动对象。
1.3 调用WdfControlDeviceInitAllocate通过驱动对象创建 WDFDEVICE_INIT结构体。
1.4 调用WdfDeviceInitSetDeviceType设置设备类型为FILE_DEVICE_NETWORK.
1.5 调用WdfDeviceInitSetCharacteristics设置设备的特性为FILE_DEVICE_SECURE_OPEN和FILE_AUTOGENERATED_DEVICE_NAME.
1.6 调用WdfDeviceCreate创建设备对象。
1.7 调用WdfControlFinishInitializing设置设备的初始化状态为完成。
1.8 调用FwpsInjectionHandleCreate创建一个检测的句柄。并设置在哪里完成检查。通过在转发层，网络层，流层，传输层。
1.9 调用WdfDeviceWdmGetDeviceObject将框架设备对象转换为设备对象的指针。
1.10 调用FwpmEngineOpen打开一个和过滤引擎的会话，这个函数会返回一个过滤引擎的句柄。
1.11 调用FwpmTransactionBegin在当前的会话下，开始一个明确的传输。
1.12 调用FwpmSubLayerAdd函数玩系统中增加一个子层。
DWORD WINAPI FwpmSubLayerAdd0(
_In_ HANDLE engineHandle,
_In_ const FWPM_SUBLAYER0 *subLayer,
_In_opt_ PSECURITY_DESCRIPTOR sd
);
这里我们主要来看第二个参数，FWPM_SUBLAYER0这个结构体。
typedef struct FWPM_SUBLAYER0_ {
GUID subLayerKey;
FWPM_DISPLAY_DATA0 displayData;
UINT16 flags;
GUID *providerKey;
FWP_BYTE_BLOB providerData;
UINT16 weight;
} FWPM_SUBLAYER0;
这里，我们主要看第一个GUID，后面的需要在例子后分析。这个可以定义的GUID.
DEFINE_GUID(
DD_PROXY_SUBLAYER,
0x0104fd7e,
0xc825,
0x414e,
0x94, 0xc9, 0xf0, 0xd5, 0x25, 0xbb, 0xc1, 0x69
);
DDProxySubLayer.subLayerKey = DD_PROXY_SUBLAYER;
DDProxySubLayer.displayData.name = L"Datagram-Data Proxy Sub-Layer";
DDProxySubLayer.displayData.description =
L"Sub-Layer for use by Datagram-Data Proxy callouts";
DDProxySubLayer.flags = 0;
DDProxySubLayer.weight = FWP_EMPTY; // auto-weight.;
1.13 调用FwpsCalloutRegister注册一个callout：
NTSTATUS NTAPI FwpsCalloutRegister0(
_Inout_ void *deviceObject,
_In_ const FWPS_CALLOUT0 *callout,
_Out_opt_ UINT32 *calloutId
);
这里主要是第二个参数的设置：
typedef struct FWPS_CALLOUT0_ {
GUID calloutKey;
UINT32 flags;
FWPS_CALLOUT_CLASSIFY_FN0 classifyFn;
FWPS_CALLOUT_NOTIFY_FN0 notifyFn;
FWPS_CALLOUT_FLOW_DELETE_NOTIFY_FN0 flowDeleteFn;
} FWPS_CALLOUT0;
这里的calloutKey是一个GUID值，我们可以定义。classifyFn为驱动分类的函数入口。notifyFn为通知消息的函数入口。flowDeleteFn为流程删除的函数入口。
1.14 调用FwpmCalloutAdd,向过滤引擎增加一个callout.
NTSTATUS NTAPI FwpmCalloutAdd0(
_In_ HANDLE engineHandle,
_In_ const FWPM_CALLOUT0 *callout,
_In_opt_ PSECURITY_DESCRIPTOR sd,
_Out_opt_ UINT32 *id
);
这里还是看第二个参数，FWPM_CALLOUT0.
typedef struct FWPM_CALLOUT0_ {
GUID calloutKey;
FWPM_DISPLAY_DATA0 displayData;
UINT32 flags;
GUID *providerKey;
FWP_BYTE_BLOB providerData;
GUID applicableLayer;
UINT32 calloutId;
} FWPM_CALLOUT0;
所以我们看到，这里我们有两个CALLOUT了，一个是FWPS_CALLOUT0,一个是FWPM_CALLOUT0,FWPS_CALLOUT0是给驱动用的，所以这里将其CALLOUT跟设备对象进行关联，但是后面还有个FWPM_CALLOUT0,这个就是跟过滤引擎进行交互的。再看其实这两个CALLOUT的GUID值是一样的，所以这样就进行了关联。两个CALLOUT相互关联，又相互独立，FWPM_CALLOUT0，负责和过滤引擎相关的操作。FWPS_CALLOUT0负责和驱动相关本身的操作。
这样，从驱动本身的驱动对象，设备对象和过滤引擎中的过滤层和CALLOUT进行联系上了。
1.15 调用FwpmFilterAdd增加一个过滤对象到系统中。
DWORD WINAPI FwpmFilterAdd0(
_In_ HANDLE engineHandle,
_In_ const FWPM_FILTER0 *filter,
_In_opt_ SECURITY_DESCRIPTOR sd,
_Out_opt_ UINT64 *id
);
这里还是第二个参数，const FWPM_FILTER0 *filter，非常复杂的结构，这个是精髓，必须好好看。
typedef struct FWPM_FILTER0_ {
GUID filterKey;
FWPM_DISPLAY_DATA0 displayData;
UINT32 flags;
GUID *providerKey;
FWP_BYTE_BLOB providerData;
GUID layerKey;
GUID subLayerKey;
FWP_VALUE0 weight;
UINT32 numFilterConditions;
FWPM_FILTER_CONDITION0 *filterCondition;
FWPM_ACTION0 action;
union {
UINT64 rawContext;
GUID providerContextKey;
};
GUID *reserved;
UINT64 filterId;
FWP_VALUE0 effectiveWeight;
} FWPM_FILTER0;
我们先把，结构体中包含的结构，进行展开。
typedef struct FWPM_DISPLAY_DATA0_ {
wchar_t *name;
wchar_t *description;
} FWPM_DISPLAY_DATA0;
typedef struct FWP_BYTE_BLOB_ {
UINT32 size;
UINT8 *data;
} FWP_BYTE_BLOB;
关于providerKey代表的是WFP内部定义的一些GUID.
typedef struct FWP_VALUE0_ {
FWP_DATA_TYPE type;
union {
; // case(FWP_EMPTY)
UINT8 uint8;
UINT16 uint16;
UINT32 uint32;
UINT64 *uint64;
INT8 int8;
INT16 int16;
INT32 int32;
INT64 *int64;
float float32;
double *double64;
FWP_BYTE_ARRAY16 *byteArray16;
FWP_BYTE_BLOB *byteBlob;
SID *sid;
FWP_BYTE_BLOB *sd;
FWP_TOKEN_INFORMATION *tokenInformation;
FWP_BYTE_BLOB *tokenAccessInformation;
LPWSTR unicodeString;
FWP_BYTE_ARRAY6 *byteArray6;
};
} FWP_VALUE0;
这里，我的理解是，这个值代表代表一个过滤的一个比重，这个跟你在哪一层过滤都有关系。
下面看一下，最最重要的一个结构体，过滤的条件。当这所有的条件的满足的情况下，定义的过滤动作才开始。
typedef struct FWPM_FILTER_CONDITION0_ {
GUID fieldKey;
FWP_MATCH_TYPE matchType;
FWP_CONDITION_VALUE conditionValue;
} FWPM_FILTER_CONDITION0;
通常这个fieldKey域，微软有明确的定义。在每一个过滤层次上，都有不一样的过滤条件。可以看http://msdn.microsoft.com/en-us/library/windows/hardware/ff549944(v=vs.85).aspx
typedef enum FWP_MATCH_TYPE_ {
FWP_MATCH_EQUAL,
FWP_MATCH_GREATER,
FWP_MATCH_LESS,
FWP_MATCH_GREATER_OR_EQUAL,
FWP_MATCH_LESS_OR_EQUAL,
FWP_MATCH_RANGE,
FWP_MATCH_FLAGS_ALL_SET,
FWP_MATCH_FLAGS_ANY_SET,
FWP_MATCH_FLAGS_NONE_SET,
FWP_MATCH_EQUAL_CASE_INSENSITIVE,
FWP_MATCH_NOT_EQUAL,
FWP_MATCH_TYPE_MAX
} FWP_MATCH_TYPE;
typedef struct FWP_CONDITION_VALUE0_ {
FWP_DATA_TYPE type;
union {
UINT8 uint8;
UINT16 uint16;
UINT32 uint32;
UINT64 *uint64;
INT8 int8;
INT16 int16;
INT32 int32;
INT64 *int64;
float float32;
double *double64;
FWP_BYTE_ARRAY16 *byteArray16;
FWP_BYTE_BLOB *byteBlob;
SID *sid;
FWP_BYTE_BLOB *sd;
FWP_TOKEN_INFORMATION *tokenInformation;
FWP_BYTE_BLOB *tokenAccessInformation;
LPWSTR unicodeString;
FWP_BYTE_ARRAY6 *byteArray6;
FWP_V4_ADDR_AND_MASK *v4AddrMask;
FWP_V6_ADDR_AND_MASK *v6AddrMask;
FWP_RANGE0 *rangeValue;
};
} FWP_CONDITION_VALUE0;
这个可能要多看下MSDN中的设置，因为跟微软玩，必须都符合它的要求。
下面再看下，过滤动作的这个结构体。
typedef struct FWPM_ACTION0_ {
FWP_ACTION_TYPE type;
union {
GUID filterType;
GUID calloutKey;
};
} FWPM_ACTION0;
这里要提一下的就是这个calloutKey，这个值正好跟之前calloutKey相吻合，主要我们向设备对象注册的callout，向过滤引擎注册的callout，以及和过滤的callout都指向同一个GUID值。
下面就是我们来看具体的CALLOUT函数的执行了，当满足这些条件后，CALLOUT被过滤引擎调用。
我们具体来看一下这个具体的CALLOUT函数：
void NTAPI classifyFn0(
_In_ const FWPS_INCOMING_VALUES0 *inFixedValues,
_In_ const FWPS_INCOMING_METADATA_VALUES0 *inMetaValues,
_Inout_ void *layerData,
_In_ const FWPS_FILTER0 *filter,
_In_ UINT64 flowContext,
_Out_ FWPS_CLASSIFY_OUT0 *classifyOut
)
typedef struct FWPS_INCOMING_VALUES0_ {
UINT16 layerId;
UINT32 valueCount;
FWPS_INCOMING_VALUE0 *incomingValue;
} FWPS_INCOMING_VALUES0;
这个layerId就是指的是过滤层的实时标识ID.可以参考微软的http://msdn.microsoft.com/en-us/library/windows/hardware/ff570731(v=vs.85).aspx
具体的数据域。
typedef struct FWPS_INCOMING_VALUE0_ {
FWP_VALUE0 value;
} FWPS_INCOMING_VALUE0;
这个值一看就知道，就是代表那些固定的值。比如一些IP地址，PORT等等。
再看：
typedef struct FWPS_INCOMING_METADATA_VALUES0_ {
UINT32 currentMetadataValues;
UINT32 flags;
UINT64 reserved;
FWPS_DISCARD_METADATA0 discardMetadata;
UINT64 flowHandle;
UINT32 ipHeaderSize;
UINT32 transportHeaderSize;
FWP_BYTE_BLOB *processPath;
UINT64 token;
UINT64 processId;
UINT32 sourceInterfaceIndex;
UINT32 destinationInterfaceIndex;
ULONG compartmentId;
FWPS_INBOUND_FRAGMENT_METADATA0 fragmentMetadata;
ULONG pathMtu;
HANDLE completionHandle;
UINT64 transportEndpointHandle;
SCOPE_ID remoteScopeId;
WSACMSGHDR *controlData;
ULONG controlDataLength;
FWP_DIRECTION packetDirection;
#if (NTDDI_VERSION >= NTDDI_WIN6SP1)
PVOID headerIncludeHeader;
ULONG headerIncludeHeaderLength;
#if (NTDDI_VERSION >= NTDDI_WIN7)
IP_ADDRESS_PREFIX destinationPrefix;
UINT16 frameLength;
UINT64 parentEndpointHandle;
UINT32 icmpIdAndSequence;
DWORD localRedirectTargetPID;
SOCKADDR *originalDestination;
#if (NTDDI_VERSION >= NTDDI_WIN8)
HANDLE redirectRecords;
UINT32 currentL2MetadataValues;
UINT32 l2Flags;
UINT32 ethernetMacHeaderSize;
UINT32 wiFiOperationMode;
#if (NDIS_SUPPORT_NDIS630)
NDIS_SWITCH_PORT_ID vSwitchSourcePortId;
NDIS_SWITCH_NIC_INDEX vSwitchSourceNicIndex;
NDIS_SWITCH_PORT_ID vSwitchDestinationPortId;
#else
UINT32 padding0;
USHORT padding1;
UINT32 padding2;
#endif
HANDLE vSwitchPacketContext;
UINT32 l2ConnectionProfileIndex;
#endif
#endif
#endif
#if (NTDDI_VERSION >= NTDDI_WIN8)
PVOID subProcessTag;
UINT64 Reserved1;
#endif
} FWPS_INCOMING_METADATA_VALUES0;
这个数据就是包含需要过滤的一些元数据的值。
我们再来看void *layerData,这个值，可能为NULL，取决于过滤条件和过滤层。
在Stream层，这个参数指向 FWPS_STREAM_CALLOUT_IO_PACKET0 结构，对于其他的层，这个参数指向NET_BUFFER_LIST，或者为NULL.
FWPS_FILTER0 *filter
这个结构体，我们之前有看过：
typedef struct FWPS_FILTER0_ {
UINT64 filterId;
FWP_VALUE0 weight;
UINT16 subLayerWeight;
UINT16 flags;
UINT32 numFilterConditions;
FWPS_FILTER_CONDITION0 *filterCondition;
FWPS_ACTION0 action;
UINT64 context;
FWPM_PROVIDER_CONTEXT0 *providerContext;
} FWPS_FILTER0;
UINT64 flowContext，这个参数是和过滤数据相关联的上下文结构。
再来看，FWPS_CLASSIFY_OUT0 *classifyOut，这个结构体比较重要：
这个是返回给调用者的结构体。
struct FWPS_CLASSIFY_OUT0 {
FWP_ACTION_TYPE actionType;
UINT64 outContext;
UINT64 filterId;
UINT32 rights;
UINT32 flags;
UINT32 reserved;
};
可以参考http://msdn.microsoft.com/en-us/library/windows/hardware/ff551229(v=vs.85).aspx
我们再从前面看，在DriverEntry最后面，我们有起一个线程来进行对包的数据的检查，看是否需要修改，以及重新注入后发送。这个也必须根据其过滤条件有关。
我们看一个复杂的callout的ClassifyFn函数的具体实现。
void
DDProxyClassify(
_In_ const FWPS_INCOMING_VALUES* inFixedValues,
_In_ const FWPS_INCOMING_METADATA_VALUES* inMetaValues,
_Inout_opt_ void* layerData,
_In_ const FWPS_FILTER* filter,
_In_ UINT64 flowContext,
_Inout_ FWPS_CLASSIFY_OUT* classifyOut
)
#endif /// (NTDDI_VERSION >= NTDDI_WIN7)
/* ++
This is the classifyFn function of the datagram-data callout. It
allocates a packet structure to store the classify and meta data and
it references the net buffer list for out-of-band modification and
re-injection. The packet structure will be queued to the global packet
queue. The worker thread will then be signaled, if idle, to process
the queue.
-- */
{
DD_PROXY_PENDED_PACKET* packet = NULL;
DD_PROXY_FLOW_CONTEXT* flowContextLocal = (DD_PROXY_FLOW_CONTEXT*)(DWORD_PTR)flowContext;
FWPS_PACKET_INJECTION_STATE packetState;
KLOCK_QUEUE_HANDLE packetQueueLockHandle;
BOOLEAN signalWorkerThread;
#if(NTDDI_VERSION >= NTDDI_WIN7)
UNREFERENCED_PARAMETER(classifyContext);
#endif
UNREFERENCED_PARAMETER(filter);
_Analysis_assume_(layerData != NULL);
//
// We don't have the necessary right to alter the packet.
// 首先检查，我们是否有权利去修改这个包。
if ((classifyOut->rights & FWPS_RIGHT_ACTION_WRITE) == 0)
{
goto Exit;
}
//
// We don't re-inspect packets that we've inspected earlier.
//
packetState = FwpsQueryPacketInjectionState(
gInjectionHandle,
layerData,
NULL
);
//如果这个包注入的状态是，之前已经被这个注入句柄注入过，就不用再处理了。
if ((packetState == FWPS_PACKET_INJECTED_BY_SELF) ||
(packetState == FWPS_PACKET_PREVIOUSLY_INJECTED_BY_SELF))
{
classifyOut->actionType = FWP_ACTION_PERMIT;
if (filter->flags & FWPS_FILTER_FLAG_CLEAR_ACTION_RIGHT)
{
classifyOut->rights &= ~FWPS_RIGHT_ACTION_WRITE;
}
goto Exit;
}
//分配一个和过滤条件相匹配的空间。
packet = ExAllocatePoolWithTag(
NonPagedPool,
sizeof(DD_PROXY_PENDED_PACKET),
DD_PROXY_PENDED_PACKET_POOL_TAG
);
//分配失败，直接退出，等待下一次处理。
if (packet == NULL)
{
classifyOut->actionType = FWP_ACTION_BLOCK;
classifyOut->rights &= ~FWPS_RIGHT_ACTION_WRITE;
goto Exit;
}
RtlZeroMemory(packet, sizeof(DD_PROXY_PENDED_PACKET));
NT_ASSERT(flowContextLocal != NULL);
packet->belongingFlow = flowContextLocal;
DDProxyReferenceFlowContext(packet->belongingFlow);
//AF_INET代表的是TCP或UDP，通过固定数据中的数据与来传输方向。
if (flowContextLocal->addressFamily == AF_INET)
{
NT_ASSERT(inFixedValues->layerId == FWPS_LAYER_DATAGRAM_DATA_V4);
packet->direction =
inFixedValues->incomingValue[FWPS_FIELD_DATAGRAM_DATA_V4_DIRECTION].\
value.uint32;
}
else
{
NT_ASSERT(inFixedValues->layerId == FWPS_LAYER_DATAGRAM_DATA_V6);
packet->direction =
inFixedValues->incomingValue[FWPS_FIELD_DATAGRAM_DATA_V6_DIRECTION].\
value.uint32;
}
//将NET_BUFFER_LIST结构体的指针赋给packer->netBufferList.
packet->netBufferList = layerData;
//
// Reference the net buffer list to make it accessible outside of
// classifyFn.
//
//引用NET_BUFFER_LIST.
FwpsReferenceNetBufferList(packet->netBufferList, TRUE);
NT_ASSERT(FWPS_IS_METADATA_FIELD_PRESENT(inMetaValues,
FWPS_METADATA_FIELD_COMPARTMENT_ID));
packet->compartmentId = inMetaValues->compartmentId;
if (packet->direction == FWP_DIRECTION_OUTBOUND)
{
NT_ASSERT(FWPS_IS_METADATA_FIELD_PRESENT(
inMetaValues,
FWPS_METADATA_FIELD_TRANSPORT_ENDPOINT_HANDLE));
packet->endpointHandle = inMetaValues->transportEndpointHandle;
if (flowContextLocal->addressFamily == AF_INET)
{
// See PREfast comments above. Opaque pointer tricks PREfast.
#pragma prefast ( suppress: 28193, "We are NOT ignoring this return value" )
packet->ipv4RemoteAddr =
RtlUlongByteSwap( /* host-order -> network-order conversion */
inFixedValues->incomingValue\
[FWPS_FIELD_DATAGRAM_DATA_V4_IP_REMOTE_ADDRESS].value.uint32);
}
else
{
RtlCopyMemory(
(UINT8*)&packet->remoteAddr,
inFixedValues->incomingValue\
[FWPS_FIELD_DATAGRAM_DATA_V6_IP_REMOTE_ADDRESS].value.byteArray16,
sizeof(FWP_BYTE_ARRAY16)
);
}
packet->remoteScopeId = inMetaValues->remoteScopeId;
if (FWPS_IS_METADATA_FIELD_PRESENT(
inMetaValues,
FWPS_METADATA_FIELD_TRANSPORT_CONTROL_DATA))
{
NT_ASSERT(inMetaValues->controlDataLength > 0);
packet->controlData = ExAllocatePoolWithTag(
NonPagedPool,
inMetaValues->controlDataLength,
DD_PROXY_CONTROL_DATA_POOL_TAG
);
if (packet->controlData == NULL)
{
classifyOut->actionType = FWP_ACTION_BLOCK;
classifyOut->rights &= ~FWPS_RIGHT_ACTION_WRITE;
goto Exit;
}
RtlCopyMemory(
packet->controlData,
inMetaValues->controlData,
inMetaValues->controlDataLength
);
packet->controlDataLength = inMetaValues->controlDataLength;
}
}
else
{
NT_ASSERT(packet->direction == FWP_DIRECTION_INBOUND);
if (flowContextLocal->addressFamily == AF_INET)
{
NT_ASSERT(inFixedValues->layerId == FWPS_LAYER_DATAGRAM_DATA_V4);
packet->interfaceIndex =
inFixedValues->incomingValue\
[FWPS_FIELD_DATAGRAM_DATA_V4_INTERFACE_INDEX].value.uint32;
packet->subInterfaceIndex =
inFixedValues->incomingValue\
[FWPS_FIELD_DATAGRAM_DATA_V4_SUB_INTERFACE_INDEX].value.uint32;
}
else
{
NT_ASSERT(inFixedValues->layerId == FWPS_LAYER_DATAGRAM_DATA_V6);
packet->interfaceIndex =
inFixedValues->incomingValue\
[FWPS_FIELD_DATAGRAM_DATA_V6_INTERFACE_INDEX].value.uint32;
packet->subInterfaceIndex =
inFixedValues->incomingValue\
[FWPS_FIELD_DATAGRAM_DATA_V6_SUB_INTERFACE_INDEX].value.uint32;
}
NT_ASSERT(FWPS_IS_METADATA_FIELD_PRESENT(
inMetaValues,
FWPS_METADATA_FIELD_IP_HEADER_SIZE));
NT_ASSERT(FWPS_IS_METADATA_FIELD_PRESENT(
inMetaValues,
FWPS_METADATA_FIELD_TRANSPORT_HEADER_SIZE));
packet->ipHeaderSize = inMetaValues->ipHeaderSize;
packet->transportHeaderSize = inMetaValues->transportHeaderSize;
packet->nblOffset =
NET_BUFFER_DATA_OFFSET(NET_BUFFER_LIST_FIRST_NB(packet->netBufferList));
}
KeAcquireInStackQueuedSpinLock(
&gPacketQueueLock,
&packetQueueLockHandle
);
if (!gDriverUnloading)
{
signalWorkerThread = IsListEmpty(&gPacketQueue);
InsertTailList(&gPacketQueue, &packet->listEntry);
packet = NULL; // ownership transferred
classifyOut->actionType = FWP_ACTION_BLOCK;
classifyOut->rights &= ~FWPS_RIGHT_ACTION_WRITE;
classifyOut->flags |= FWPS_CLASSIFY_OUT_FLAG_ABSORB;
}
else
{
//
// Driver is being unloaded, permit any incoming packets.
//
signalWorkerThread = FALSE;
classifyOut->actionType = FWP_ACTION_PERMIT;
if (filter->flags & FWPS_FILTER_FLAG_CLEAR_ACTION_RIGHT)
{
classifyOut->rights &= ~FWPS_RIGHT_ACTION_WRITE;
}
}
if (signalWorkerThread)
{
KeSetEvent(
&gPacketQueueEvent,
0,
FALSE
);
}
KeReleaseInStackQueuedSpinLock(&packetQueueLockHandle);
Exit:
if (packet != NULL)
{
DDProxyFreePendedPacket(packet, packet->controlData);
}
return;
}
这里是放在函数外注入修改，这里是通过线程来处理的，我们先看重新注入函数。
NTSTATUS
DDProxyCloneModifyReinjectInbound(
_In_ DD_PROXY_PENDED_PACKET* packet
)
/* ++
This function clones the inbound net buffer list and, if needed,
modifies the source port and/or source address and receive-injects
the clone back to the tcpip stack.
-- */
{
NTSTATUS status = STATUS_SUCCESS;
NET_BUFFER_LIST* clonedNetBufferList = NULL;
NET_BUFFER* netBuffer;
UDP_HEADER* udpHeader;
ULONG nblOffset;
NDIS_STATUS ndisStatus;
//
// For inbound net buffer list, we can assume it contains only one
// net buffer.
//
netBuffer = NET_BUFFER_LIST_FIRST_NB(packet->netBufferList);
nblOffset = NET_BUFFER_DATA_OFFSET(netBuffer);
//
// The TCP/IP stack could have retreated the net buffer list by the
// transportHeaderSize amount; detect the condition here to avoid
// retreating twice.
//
if (nblOffset != packet->nblOffset)
{
NT_ASSERT(packet->nblOffset - nblOffset == packet->transportHeaderSize);
packet->transportHeaderSize = 0;
}
//
// Adjust the net buffer list offset to the start of the IP header.
//
ndisStatus = NdisRetreatNetBufferDataStart(
netBuffer,
packet->ipHeaderSize + packet->transportHeaderSize,
0,
NULL
);
_Analysis_assume_(ndisStatus == NDIS_STATUS_SUCCESS);
//
// Note that the clone will inherit the original net buffer list's offset.
//
status = FwpsAllocateCloneNetBufferList(
packet->netBufferList,
NULL,
NULL,
0,
&clonedNetBufferList
);
//
// Undo the adjustment on the original net buffer list.
//
NdisAdvanceNetBufferDataStart(
netBuffer,
packet->ipHeaderSize + packet->transportHeaderSize,
FALSE,
NULL
);
if (!NT_SUCCESS(status))
{
goto Exit;
}
//
// Check to see if port modification is required.
//
if ((packet->belongingFlow->protocol == IPPROTO_UDP) &&
(packet->belongingFlow->toRemotePort != 0))
{
netBuffer = NET_BUFFER_LIST_FIRST_NB(clonedNetBufferList);
//
// Advance to the beginning of the transport header (i.e. UDP header).
//
NdisAdvanceNetBufferDataStart(
netBuffer,
packet->ipHeaderSize,
FALSE,
NULL
);
udpHeader = NdisGetDataBuffer(
netBuffer,
sizeof(UDP_HEADER),
NULL,
sizeof(UINT16),
0
);
NT_ASSERT(udpHeader != NULL); // We can assume UDP header in a net buffer
// is contiguous and 2-byte aligned.
_Analysis_assume_(udpHeader != NULL);
udpHeader->destPort =
packet->belongingFlow->toRemotePort;
// This is our new source port -- or
// the destination port of the original
// outbound traffic.
udpHeader->checksum = 0;
//
// Undo the advance. Net buffer list needs to be positioned at the
// beginning of IP header for address modification and/or receive-
// injection.
//
ndisStatus = NdisRetreatNetBufferDataStart(
netBuffer,
packet->ipHeaderSize,
0,
NULL
);
_Analysis_assume_(ndisStatus == NDIS_STATUS_SUCCESS);
}
if (packet->belongingFlow->toRemoteAddr != NULL)
{
status = FwpsConstructIpHeaderForTransportPacket(
clonedNetBufferList,
packet->ipHeaderSize,
packet->belongingFlow->addressFamily,
packet->belongingFlow->toRemoteAddr,
// This is our new source address --
// or the destination address of the
// original outbound traffic.
(UINT8*)&packet->belongingFlow->localAddr,
// This is the destination address of
// the clone -- or the source of the
// original outbound traffic.
packet->belongingFlow->protocol,
0,
NULL,
0,
0,
NULL,
0,
0
);
if (!NT_SUCCESS(status))
{
goto Exit;
}
}
status = FwpsInjectTransportReceiveAsync(
gInjectionHandle,
NULL,
NULL,
0,
packet->belongingFlow->addressFamily,
packet->compartmentId,
packet->interfaceIndex,
packet->subInterfaceIndex,
clonedNetBufferList,
DDProxyInjectComplete,
packet
);
if (!NT_SUCCESS(status))
{
goto Exit;
}
clonedNetBufferList = NULL; // ownership transferred to the
// completion function.
Exit:
if (clonedNetBufferList != NULL)
{
FwpsFreeCloneNetBufferList(clonedNetBufferList, 0);
}
return status;
}
写在最后，关于WFP，自己只是懂了点皮毛，这个需要非常好的网络相关的知识，而且需要对
微软的NDIS非常熟悉，虽然自己差不多将NDIS看了许多，但是还不够熟练。
而且，关于WFP中，微软定义了非常多了不好理解的数据结构和一些过滤层，
这应该是一个大工程，需要自己经常，反复揣摩。