作者： tomxu 原文来源： https://tidb.net/blog/69083bca
TiDB v7.1.0版本 相关（部署、在线扩容、数据迁移）测试
一、服务器信息参数
| 序号 | 服务器型号 | 主机名 | 配置 | | IP地址 | 用户名 | 密码 | | -- | --------- | --------------------------- | -------------------------------------------------------------- | - | ------------- | ---- | --------- | | 1 | Dell R610 | 192_168_31_50_TiDB | E5-2609 v3 @ 1.90GHz * 2 / 32GB ROM /2TB HD/10000* 2 Network | | 192.168.31.50 | root | P@ssw0rd | | 2 | Dell R610 | 192_168_31_51_PD1 | E5-2609 v3 @ 1.90GHz * 2 / 32GB ROM /2TB HD/10000* 2 Network | | 192.168.31.51 | root | P@ssw0rd | | 3 | Dell R610 | 192_168_31_52_PD2 | E5-2609 v3 @ 1.90GHz * 2 / 32GB ROM /2TB HD/10000* 2 Network | | 192.168.31.52 | root | P@ssw0rd | | 4 | Dell R610 | 192_168_31_53_TiKV1 | E5-2609 v3 @ 1.90GHz * 2 / 32GB ROM /2TB HD/10000* 2 Network | | 192.168.31.53 | root | P@ssw0rd | | 5 | Dell R610 | 192_168_31_54_TiKV2 | E5-2609 v3 @ 1.90GHz * 2 / 32GB ROM /2TB HD/10000* 2 Network | | 192.168.31.54 | root | P@ssw0rd | | 6 | Dell R610 | 192_168_31_55_TiKV3 | E5-2609 v3 @ 1.90GHz * 2 / 32GB ROM /2TB HD/10000* 2 Network | | 192.168.31.55 | root | P@ssw0rd | | 7 | Dell R610 | 192_168_31_56_TiKV4 | E5-2609 v3 @ 1.90GHz * 2 / 32GB ROM /2TB HD/10000* 2 Network | | 192.168.31.56 | root | P@ssw0rd | | 8 | Dell R610 | 192_168_31_57_Dashboard | E5-2609 v3 @ 1.90GHz * 2 / 32GB ROM /2TB HD/10000* 2 Network | | 192.168.31.57 | root | P@ssw0rd |
二、TiDB v7.1.0 离线安装包下载
本次采用在官方下载页面选择对应版本的 TiDB server 离线镜像包（包含 TiUP 离线组件包）。需要同时下载 TiDB-community-server 软件包和 TiDB-community-toolkit 软件包。
TiDB-community-server 软件包： https://download.pingcap.org/tidb-community-server-v7.1.0-linux-amd64.tar.gz
TiDB-community-toolkit 软件包： https://download.pingcap.org/tidb-community-toolkit-v7.1.0-linux-amd64.tar.gz
三、上传安装包到 192_168_31_50_TiDB 主机的 /home目录，
可以使用以下两种方式
（1）命令方式上传文件到指定的服务器：scp 上传文件的包名子 root@上传服务器地址:/上传路径
（2）工具方式上传文件到指定的服务器：可以使用winscp、xsftp等工具 
上传完成后，解压上述两个包文件 [root@192_168_31_50_TiDB tidb-community-server-v7.1.0-linux-amd64]# sh local_install.sh
Disable telemetry success
Successfully set mirror to /tidb-setup/tidb-community-server-v7.1.0-linux-amd64
Detected shell: bash
Shell profile: /root/.bash_profile
Installed path: /root/.tiup/bin/tiup
===============================================
1. source /root/.bash_profile
2. Have a try: tiup playground
===============================================
[root@192_168_31_50_TiDB tidb-community-server-v7.1.0-linux-amd64]# source /root/.bash_profile
初始化集群拓扑文件[首次部署，排除192.168.31.56，然后在进行扩容操作]
[root@192_168_31_50_TiDB tidb-community-server-v7.1.0-linux-amd64]# tiup cluster template > tidb_install.yaml
编辑拓扑文件内容如下：
# # Global variables are applied to all deployments and used as the default value of
# # the deployments if a specific deployment value is missing.
global:
# # The user who runs the tidb cluster.
user: "tidb"
# # group is used to specify the group name the user belong to if it's not the same as user.
# group: "tidb"
# # SSH port of servers in the managed cluster.
ssh_port: 22
# # Storage directory for cluster deployment files, startup scripts, and configuration files.
deploy_dir: "/tidb-deploy"
# # TiDB Cluster data storage directory
data_dir: "/tidb-data"
# # Supported values: "amd64", "arm64" (default: "amd64")
arch: "amd64"
# # Resource Control is used to limit the resource of an instance.
# # See: https://www.freedesktop.org/software/systemd/man/systemd.resource-control.html
# # Supports using instance-level `resource_control` to override global `resource_control`.
# resource_control:
# # See: https://www.freedesktop.org/software/systemd/man/systemd.resource-control.html#MemoryLimit=bytes
# memory_limit: "2G"
# # See: https://www.freedesktop.org/software/systemd/man/systemd.resource-control.html#CPUQuota=
# # The percentage specifies how much CPU time the unit shall get at maximum, relative to the total CPU time available on one CPU. Use values > 100% for allotting CPU time on more than one CPU.
# # Example: CPUQuota=200% ensures that the executed processes will never get more than two CPU time.
# cpu_quota: "200%"
# # See: https://www.freedesktop.org/software/systemd/man/systemd.resource-control.html#IOReadBandwidthMax=device%20bytes
# io_read_bandwidth_max: "/dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0 100M"
# io_write_bandwidth_max: "/dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0 100M"
# # Monitored variables are applied to all the machines.
monitored:
# # The communication port for reporting system information of each node in the TiDB cluster.
node_exporter_port: 9100
# # Blackbox_exporter communication port, used for TiDB cluster port monitoring.
blackbox_exporter_port: 9115
# # Storage directory for deployment files, startup scripts, and configuration files of monitoring components.
# deploy_dir: "/tidb-deploy/monitored-9100"
# # Data storage directory of monitoring components.
# data_dir: "/tidb-data/monitored-9100"
# # Log storage directory of the monitoring component.
# log_dir: "/tidb-deploy/monitored-9100/log"
# # Server configs are used to specify the runtime configuration of TiDB components.
# # All configuration items can be found in TiDB docs:
# # - TiDB: https://pingcap.com/docs/stable/reference/configuration/tidb-server/configuration-file/
# # - TiKV: https://pingcap.com/docs/stable/reference/configuration/tikv-server/configuration-file/
# # - PD: https://pingcap.com/docs/stable/reference/configuration/pd-server/configuration-file/
# # - TiFlash: https://docs.pingcap.com/tidb/stable/tiflash-configuration
# #
# # All configuration items use points to represent the hierarchy, e.g:
# # readpool.storage.use-unified-pool
# # ^ ^
# # - example: https://github.com/pingcap/tiup/blob/master/examples/topology.example.yaml.
# # You can overwrite this configuration via the instance-level `config` field.
# server_configs:
# tidb:
# tikv:
# pd:
# tiflash:
# tiflash-learner:
# # Server configs are used to specify the configuration of PD Servers.
pd_servers:
# # The ip address of the PD Server.
- host: 192.168.31.51
# # SSH port of the server.
# ssh_port: 22
# # PD Server name
# name: "pd-1"
# # communication port for TiDB Servers to connect.
# client_port: 2379
# # Communication port among PD Server nodes.
# peer_port: 2380
# # PD Server deployment file, startup script, configuration file storage directory.
# deploy_dir: "/tidb-deploy/pd-2379"
# # PD Server data storage directory.
# data_dir: "/tidb-data/pd-2379"
# # PD Server log file storage directory.
# log_dir: "/tidb-deploy/pd-2379/log"
# # numa node bindings.
# numa_node: "0,1"
# # The following configs are used to overwrite the `server_configs.pd` values.
# config:
# schedule.max-merge-region-size: 20
# schedule.max-merge-region-keys: 200000
- host: 192.168.31.52
# ssh_port: 22
# name: "pd-1"
# client_port: 2379
# peer_port: 2380
# deploy_dir: "/tidb-deploy/pd-2379"
# data_dir: "/tidb-data/pd-2379"
# log_dir: "/tidb-deploy/pd-2379/log"
# numa_node: "0,1"
# config:
# schedule.max-merge-region-size: 20
# schedule.max-merge-region-keys: 200000
# host: 10.0.1.13
# ssh_port: 22
# name: "pd-1"
# client_port: 2379
# peer_port: 2380
# deploy_dir: "/tidb-deploy/pd-2379"
# data_dir: "/tidb-data/pd-2379"
# log_dir: "/tidb-deploy/pd-2379/log"
# numa_node: "0,1"
# config:
# schedule.max-merge-region-size: 20
# schedule.max-merge-region-keys: 200000
# # Server configs are used to specify the configuration of TiDB Servers.
tidb_servers:
# # The ip address of the TiDB Server.
- host: 192.168.31.50
# # SSH port of the server.
# ssh_port: 22
# # The port for clients to access the TiDB cluster.
# port: 4000
# # TiDB Server status API port.
# status_port: 10080
# # TiDB Server deployment file, startup script, configuration file storage directory.
# deploy_dir: "/tidb-deploy/tidb-4000"
# # TiDB Server log file storage directory.
# log_dir: "/tidb-deploy/tidb-4000/log"
# # The ip address of the TiDB Server.
#host: 10.0.1.15
# ssh_port: 22
# port: 4000
# status_port: 10080
# deploy_dir: "/tidb-deploy/tidb-4000"
# log_dir: "/tidb-deploy/tidb-4000/log"
#host: 10.0.1.16
# ssh_port: 22
# port: 4000
# status_port: 10080
# deploy_dir: "/tidb-deploy/tidb-4000"
# log_dir: "/tidb-deploy/tidb-4000/log"
# # Server configs are used to specify the configuration of TiKV Servers.
tikv_servers:
# # The ip address of the TiKV Server.
- host: 192.168.31.53
# # SSH port of the server.
# ssh_port: 22
# # TiKV Server communication port.
# port: 20160
# # TiKV Server status API port.
# status_port: 20180
# # TiKV Server deployment file, startup script, configuration file storage directory.
# deploy_dir: "/tidb-deploy/tikv-20160"
# # TiKV Server data storage directory.
# data_dir: "/tidb-data/tikv-20160"
# # TiKV Server log file storage directory.
# log_dir: "/tidb-deploy/tikv-20160/log"
# # The following configs are used to overwrite the `server_configs.tikv` values.
# config:
# log.level: warn
# # The ip address of the TiKV Server.
- host: 192.168.31.54
# ssh_port: 22
# port: 20160
# status_port: 20180
# deploy_dir: "/tidb-deploy/tikv-20160"
# data_dir: "/tidb-data/tikv-20160"
# log_dir: "/tidb-deploy/tikv-20160/log"
# config:
# log.level: warn
- host: 192.168.31.55
# ssh_port: 22
# port: 20160
# status_port: 20180
# deploy_dir: "/tidb-deploy/tikv-20160"
# data_dir: "/tidb-data/tikv-20160"
# log_dir: "/tidb-deploy/tikv-20160/log"
# config:
# log.level: warn
# # Server configs are used to specify the configuration of TiFlash Servers.
tiflash_servers:
# # The ip address of the TiFlash Server.
- host: 192.168.31.57
# # SSH port of the server.
# ssh_port: 22
# # TiFlash TCP Service port.
# tcp_port: 9000
# # TiFlash raft service and coprocessor service listening address.
# flash_service_port: 3930
# # TiFlash Proxy service port.
# flash_proxy_port: 20170
# # TiFlash Proxy metrics port.
# flash_proxy_status_port: 20292
# # TiFlash metrics port.
# metrics_port: 8234
# # TiFlash Server deployment file, startup script, configuration file storage directory.
# deploy_dir: /tidb-deploy/tiflash-9000
## With cluster version >= v4.0.9 and you want to deploy a multi-disk TiFlash node, it is recommended to
## check config.storage.* for details. The data_dir will be ignored if you defined those configurations.
## Setting data_dir to a ','-joined string is still supported but deprecated.
## Check https://docs.pingcap.com/tidb/stable/tiflash-configuration#multi-disk-deployment for more details.
# # TiFlash Server data storage directory.
# data_dir: /tidb-data/tiflash-9000
# # TiFlash Server log file storage directory.
# log_dir: /tidb-deploy/tiflash-9000/log
# # The ip address of the TiKV Server.
#host: 10.0.1.21
# ssh_port: 22
# tcp_port: 9000
# flash_service_port: 3930
# flash_proxy_port: 20170
# flash_proxy_status_port: 20292
# metrics_port: 8234
# deploy_dir: /tidb-deploy/tiflash-9000
# data_dir: /tidb-data/tiflash-9000
# log_dir: /tidb-deploy/tiflash-9000/log
# # Server configs are used to specify the configuration of Prometheus Server.
monitoring_servers:
# # The ip address of the Monitoring Server.
- host: 192.168.31.57
# # SSH port of the server.
# ssh_port: 22
# # Prometheus Service communication port.
# port: 9090
# # ng-monitoring servive communication port
# ng_port: 12020
# # Prometheus deployment file, startup script, configuration file storage directory.
# deploy_dir: "/tidb-deploy/prometheus-8249"
# # Prometheus data storage directory.
# data_dir: "/tidb-data/prometheus-8249"
# # Prometheus log file storage directory.
# log_dir: "/tidb-deploy/prometheus-8249/log"
# # Server configs are used to specify the configuration of Grafana Servers.
grafana_servers:
# # The ip address of the Grafana Server.
- host: 192.168.31.57
# # Grafana web port (browser access)
# port: 3000
# # Grafana deployment file, startup script, configuration file storage directory.
# deploy_dir: /tidb-deploy/grafana-3000
# # Server configs are used to specify the configuration of Alertmanager Servers.
alertmanager_servers:
# # The ip address of the Alertmanager Server.
- host: 192.168.31.57
# # SSH port of the server.
# ssh_port: 22
# # Alertmanager web service port.
# web_port: 9093
# # Alertmanager communication port.
# cluster_port: 9094
# # Alertmanager deployment file, startup script, configuration file storage directory.
# deploy_dir: "/tidb-deploy/alertmanager-9093"
# # Alertmanager data storage directory.
# data_dir: "/tidb-data/alertmanager-9093"
# # Alertmanager log file storage directory.
# log_dir: "/tidb-deploy/alertmanager-9093/log"
进行按集群拓扑文件对服务器条件检测
[root@192_168_31_50_TiDB tidb-community-server-v7.1.0-linux-amd64]# tiup cluster check ./tidb_install.yaml --user root -p
Input SSH password:
安装前条件检测结果如下：可以看到结果中有部份fail或warn状态信息，可以能过增加修复参数 --apply 进行修复。
Node Check Result Message
---- ----- ------ -------
192.168.31.54 disk Warn mount point / does not have 'noatime' option set
192.168.31.54 cpu-governor Warn Unable to determine current CPU frequency governor policy
192.168.31.54 service Fail service firewalld is running but should be stopped
192.168.31.54 swap Warn swap is enabled, please disable it for best performance
192.168.31.54 thp Fail THP is enabled, please disable it for best performance
192.168.31.55 swap Warn swap is enabled, please disable it for best performance
192.168.31.55 disk Warn mount point / does not have 'noatime' option set
192.168.31.55 service Fail service firewalld is running but should be stopped
192.168.31.55 cpu-governor Warn Unable to determine current CPU frequency governor policy
192.168.31.55 thp Fail THP is enabled, please disable it for best performance
192.168.31.50 service Fail service firewalld is running but should be stopped
192.168.31.50 cpu-governor Warn Unable to determine current CPU frequency governor policy
192.168.31.50 swap Warn swap is enabled, please disable it for best performance
192.168.31.50 thp Fail THP is enabled, please disable it for best performance
192.168.31.57 command Fail numactl not usable, bash: numactl: command not found
192.168.31.57 disk Warn mount point / does not have 'noatime' option set
192.168.31.57 sysctl Fail net.core.somaxconn = 128, should be greater than 32768
192.168.31.57 sysctl Fail net.ipv4.tcp_syncookies = 1, should be 0
192.168.31.57 sysctl Fail vm.swappiness = 30, should be 0
192.168.31.57 thp Fail THP is enabled, please disable it for best performance
192.168.31.57 cpu-governor Warn Unable to determine current CPU frequency governor policy
192.168.31.57 swap Warn swap is enabled, please disable it for best performance
192.168.31.57 selinux Fail SELinux is not disabled
192.168.31.57 service Fail service firewalld is running but should be stopped
192.168.31.57 limits Fail soft limit of 'nofile' for user 'tidb' is not set or too low
192.168.31.57 limits Fail hard limit of 'nofile' for user 'tidb' is not set or too low
192.168.31.57 limits Fail soft limit of 'stack' for user 'tidb' is not set or too low
192.168.31.51 cpu-governor Warn Unable to determine current CPU frequency governor policy
192.168.31.51 disk Warn mount point / does not have 'noatime' option set
192.168.31.51 service Fail service firewalld is running but should be stopped
192.168.31.51 swap Warn swap is enabled, please disable it for best performance
192.168.31.51 thp Fail THP is enabled, please disable it for best performance
192.168.31.52 service Fail service firewalld is running but should be stopped
192.168.31.52 cpu-governor Warn Unable to determine current CPU frequency governor policyB
192.168.31.52 disk Warn mount point / does not have 'noatime' option set
192.168.31.52 swap Warn swap is enabled, please disable it for best performance
192.168.31.52 thp Fail THP is enabled, please disable it for best performance
192.168.31.53 disk Warn mount point / does not have 'noatime' option set
192.168.31.53 thp Fail THP is enabled, please disable it for best performance
192.168.31.53 service Fail service firewalld is running but should be stopped
192.168.31.53 cpu-governor Warn Unable to determine current CPU frequency governor policy
192.168.31.53 swap Warn swap is enabled, please disable it for best performance
[root@192_168_31_50_TiDB tidb-community-server-v7.1.0-linux-amd64]# tiup cluster check ./tidb_install.yaml --apply --user root -p
检测结果中有192.168.31.57主机上没有安装numactl，远程在此主机使用如下命令进行安装numactl
[root@192_168_31_57_Dashboard ~]# yum -y install numactl
Failed to set locale, defaulting to C
Loaded plugins: fastestmirror
Determining fastest mirrors
* base: mirrors.aliyun.com
* extras: mirrors.aliyun.com
* updates: mirrors.aliyun.com
base | 3.6 kB 00:00
extras | 2.9 kB 00:00
updates | 2.9 kB 00:00
(1/4): extras/7/x86_64/primary_db | 249 kB 00:00
(2/4): base/7/x86_64/group_gz | 153 kB 00:00
(3/4): base/7/x86_64/primary_db | 6.1 MB 00:00
(4/4): updates/7/x86_64/primary_db | 21 MB 00:01
Resolving Dependencies
--> Running transaction check
---> Package numactl.x86_64 0:2.0.12-5.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
numactl x86_64 2.0.12-5.el7 base 66 k
Transaction Summary
================================================================================
Install 1 Package
Total download size: 66 k
Installed size: 141 k
Downloading packages:
warning: /var/cache/yum/x86_64/7/base/packages/numactl-2.0.12-5.el7.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID f4a80eb5: NOKEY
Public key for numactl-2.0.12-5.el7.x86_64.rpm is not installed
[root@192_168_31_50_TiDB tidb-community-server-v7.1.0-linux-amd64]# tiup cluster check ./tidb_install.yaml --user root -p
Input SSH password:
[root@192_168_31_50_TiDB tidb-community-server-v7.1.0-linux-amd64]# tiup cluster deploy tidb-lab v7.1.0 ./tidb_install.yaml --user root -p
tiup is checking updates for component cluster ...
Starting component `cluster`: /root/.tiup/components/cluster/v1.12.2/tiup-cluster deploy tidb-lab v7.1.0 ./tidb_install.yaml --user root -p
Input SSH password:
+ Detect CPU Arch Name
- Detecting node 192.168.31.51 Arch info ... ⠹ Shell: host=192.168.31.51, sudo=false, command=`uname -m`
+ Detect CPU Arch Name
- Detecting node 192.168.31.51 Arch info ... Done
- Detecting node 192.168.31.52 Arch info ... Done
- Detecting node 192.168.31.53 Arch info ... Done
- Detecting node 192.168.31.54 Arch info ... Done
- Detecting node 192.168.31.55 Arch info ... Done
- Detecting node 192.168.31.50 Arch info ... Done
- Detecting node 192.168.31.57 Arch info ... Done
+ Detect CPU OS Name
- Detecting node 192.168.31.51 OS info ... ⠹ Shell: host=192.168.31.51, sudo=false, command=`uname -s`
+ Detect CPU OS Name
- Detecting node 192.168.31.51 OS info ... Done
- Detecting node 192.168.31.52 OS info ... Done
- Detecting node 192.168.31.53 OS info ... Done
- Detecting node 192.168.31.54 OS info ... Done
- Detecting node 192.168.31.55 OS info ... Done
- Detecting node 192.168.31.50 OS info ... Done
- Detecting node 192.168.31.57 OS info ... Done
Please confirm your topology:
Cluster type: tidb
Cluster name: tidb-lab
Cluster version: v7.1.0
Role Host Ports OS/Arch Directories
---- ---- ----- ------- -----------
pd 192.168.31.51 2379/2380 linux/x86_64 /tidb-deploy/pd-2379,/tidb-data/pd-2379
pd 192.168.31.52 2379/2380 linux/x86_64 /tidb-deploy/pd-2379,/tidb-data/pd-2379
tikv 192.168.31.53 20160/20180 linux/x86_64 /tidb-deploy/tikv-20160,/tidb-data/tikv-20160
tikv 192.168.31.54 20160/20180 linux/x86_64 /tidb-deploy/tikv-20160,/tidb-data/tikv-20160
tikv 192.168.31.55 20160/20180 linux/x86_64 /tidb-deploy/tikv-20160,/tidb-data/tikv-20160
tidb 192.168.31.50 4000/10080 linux/x86_64 /tidb-deploy/tidb-4000
tiflash 192.168.31.57 9000/8123/3930/20170/20292/8234 linux/x86_64 /tidb-deploy/tiflash-9000,/tidb-data/tiflash-9000
prometheus 192.168.31.57 9090/12020 linux/x86_64 /tidb-deploy/prometheus-9090,/tidb-data/prometheus-9090
grafana 192.168.31.57 3000 linux/x86_64 /tidb-deploy/grafana-3000
alertmanager 192.168.31.57 9093/9094 linux/x86_64 /tidb-deploy/alertmanager-9093,/tidb-data/alertmanager-9093
Attention:
1. If the topology is not what you expected, check your yaml file.
2. Please confirm there is no port/directory conflicts in same host.
Do you want to continue? [y/N]: (default=N) y
+ Generate SSH keys ... Done
+ Download TiDB components
- Download pd:v7.1.0 (linux/amd64) ... Done
- Download tikv:v7.1.0 (linux/amd64) ... Done
- Download tidb:v7.1.0 (linux/amd64) ... Done
- Download tiflash:v7.1.0 (linux/amd64) ... Done
- Download prometheus:v7.1.0 (linux/amd64) ... Done
- Download grafana:v7.1.0 (linux/amd64) ... Done
- Download alertmanager: (linux/amd64) ... Done
- Download node_exporter: (linux/amd64) ... Done
- Download blackbox_exporter: (linux/amd64) ... Done
+ Initialize target host environments
- Prepare 192.168.31.54:22 ... Done
- Prepare 192.168.31.55:22 ... Done
- Prepare 192.168.31.50:22 ... Done
- Prepare 192.168.31.57:22 ... Done
- Prepare 192.168.31.51:22 ... Done
- Prepare 192.168.31.52:22 ... Done
- Prepare 192.168.31.53:22 ... Done
+ Deploy TiDB instance
- Copy pd -> 192.168.31.51 ... Done
- Copy pd -> 192.168.31.52 ... Done
- Copy tikv -> 192.168.31.53 ... Done
- Copy tikv -> 192.168.31.54 ... Done
- Copy tikv -> 192.168.31.55 ... Done
- Copy tidb -> 192.168.31.50 ... Done
- Copy tiflash -> 192.168.31.57 ... Done
- Copy prometheus -> 192.168.31.57 ... Done
- Copy grafana -> 192.168.31.57 ... Done
- Copy alertmanager -> 192.168.31.57 ... Done
- Deploy node_exporter -> 192.168.31.51 ... Done
- Deploy node_exporter -> 192.168.31.52 ... Done
- Deploy node_exporter -> 192.168.31.53 ... Done
- Deploy node_exporter -> 192.168.31.54 ... Done
- Deploy node_exporter -> 192.168.31.55 ... Done
- Deploy node_exporter -> 192.168.31.50 ... Done
- Deploy node_exporter -> 192.168.31.57 ... Done
- Deploy blackbox_exporter -> 192.168.31.53 ... Done
- Deploy blackbox_exporter -> 192.168.31.54 ... Done
- Deploy blackbox_exporter -> 192.168.31.55 ... Done
- Deploy blackbox_exporter -> 192.168.31.50 ... Done
- Deploy blackbox_exporter -> 192.168.31.57 ... Done
- Deploy blackbox_exporter -> 192.168.31.51 ... Done
- Deploy blackbox_exporter -> 192.168.31.52 ... Done
+ Copy certificate to remote host
+ Init instance configs
- Generate config pd -> 192.168.31.51:2379 ... Done
- Generate config pd -> 192.168.31.52:2379 ... Done
- Generate config tikv -> 192.168.31.53:20160 ... Done
- Generate config tikv -> 192.168.31.54:20160 ... Done
- Generate config tikv -> 192.168.31.55:20160 ... Done
- Generate config tidb -> 192.168.31.50:4000 ... Done
- Generate config tiflash -> 192.168.31.57:9000 ... Done
- Generate config prometheus -> 192.168.31.57:9090 ... Done
- Generate config grafana -> 192.168.31.57:3000 ... Done
- Generate config alertmanager -> 192.168.31.57:9093 ... Done
+ Init monitor configs
- Generate config node_exporter -> 192.168.31.55 ... Done
- Generate config node_exporter -> 192.168.31.50 ... Done
- Generate config node_exporter -> 192.168.31.57 ... Done
- Generate config node_exporter -> 192.168.31.51 ... Done
- Generate config node_exporter -> 192.168.31.52 ... Done
- Generate config node_exporter -> 192.168.31.53 ... Done
- Generate config node_exporter -> 192.168.31.54 ... Done
- Generate config blackbox_exporter -> 192.168.31.57 ... Done
- Generate config blackbox_exporter -> 192.168.31.51 ... Done
- Generate config blackbox_exporter -> 192.168.31.52 ... Done
- Generate config blackbox_exporter -> 192.168.31.53 ... Done
- Generate config blackbox_exporter -> 192.168.31.54 ... Done
- Generate config blackbox_exporter -> 192.168.31.55 ... Done
- Generate config blackbox_exporter -> 192.168.31.50 ... Done
Enabling component pd
Enabling instance 192.168.31.52:2379
Enabling instance 192.168.31.51:2379
Enable instance 192.168.31.52:2379 success
Enable instance 192.168.31.51:2379 success
Enabling component tikv
Enabling instance 192.168.31.55:20160
Enabling instance 192.168.31.53:20160
Enabling instance 192.168.31.54:20160
Enable instance 192.168.31.53:20160 success
Enable instance 192.168.31.55:20160 success
Enable instance 192.168.31.54:20160 success
Enabling component tidb
Enabling instance 192.168.31.50:4000
Enable instance 192.168.31.50:4000 success
Enabling component tiflash
Enabling instance 192.168.31.57:9000
Enable instance 192.168.31.57:9000 success
Enabling component prometheus
Enabling instance 192.168.31.57:9090
Enable instance 192.168.31.57:9090 success
Enabling component grafana
Enabling instance 192.168.31.57:3000
Enable instance 192.168.31.57:3000 success
Enabling component alertmanager
Enabling instance 192.168.31.57:9093
Enable instance 192.168.31.57:9093 success
Enabling component node_exporter
Enabling instance 192.168.31.51
Enabling instance 192.168.31.52
Enabling instance 192.168.31.54
Enabling instance 192.168.31.50
Enabling instance 192.168.31.55
Enabling instance 192.168.31.57
Enabling instance 192.168.31.53
Enable 192.168.31.51 success
Enable 192.168.31.53 success
Enable 192.168.31.52 success
Enable 192.168.31.55 success
Enable 192.168.31.54 success
Enable 192.168.31.50 success
Enable 192.168.31.57 success
Enabling component blackbox_exporter
Enabling instance 192.168.31.51
Enabling instance 192.168.31.54
Enabling instance 192.168.31.55
Enabling instance 192.168.31.50
Enabling instance 192.168.31.57
Enabling instance 192.168.31.53
Enabling instance 192.168.31.52
Enable 192.168.31.51 success
Enable 192.168.31.54 success
Enable 192.168.31.55 success
Enable 192.168.31.53 success
Enable 192.168.31.52 success
Enable 192.168.31.50 success
Enable 192.168.31.57 success
Cluster `tidb-lab` deployed successfully, you can start it with command: `tiup cluster start tidb-lab --init
部署完成，执行 tiup cluster start tidb-lab --init 安全初始化
[root@192_168_31_50_TiDB tidb-community-server-v7.1.0-linux-amd64]# tiup cluster start tidb-lab --init
tiup is checking updates for component cluster ...
Starting component `cluster`: /root/.tiup/components/cluster/v1.12.2/tiup-cluster start tidb-lab --init
Starting cluster tidb-lab...
+ [ Serial ] - SSHKeySet: privateKey=/root/.tiup/storage/cluster/clusters/tidb-lab/ssh/id_rsa, publicKey=/root/.tiup/storage/cluster/clusters/tidb-lab/ssh/id_rsa.pub
+ [Parallel] - UserSSH: user=tidb, host=192.168.31.55
+ [Parallel] - UserSSH: user=tidb, host=192.168.31.53
+ [Parallel] - UserSSH: user=tidb, host=192.168.31.52
+ [Parallel] - UserSSH: user=tidb, host=192.168.31.51
+ [Parallel] - UserSSH: user=tidb, host=192.168.31.50
+ [Parallel] - UserSSH: user=tidb, host=192.168.31.57
+ [Parallel] - UserSSH: user=tidb, host=192.168.31.57
+ [Parallel] - UserSSH: user=tidb, host=192.168.31.57
+ [Parallel] - UserSSH: user=tidb, host=192.168.31.57
+ [Parallel] - UserSSH: user=tidb, host=192.168.31.54
+ [ Serial ] - StartCluster
Starting component pd
Starting instance 192.168.31.52:2379
Starting instance 192.168.31.51:2379
Start instance 192.168.31.51:2379 success
Start instance 192.168.31.52:2379 success
Starting component tikv
Starting instance 192.168.31.55:20160
Starting instance 192.168.31.53:20160
Starting instance 192.168.31.54:20160
Start instance 192.168.31.53:20160 success
Start instance 192.168.31.55:20160 success
Start instance 192.168.31.54:20160 success
Starting component tidb
Starting instance 192.168.31.50:4000
Start instance 192.168.31.50:4000 success
Starting component tiflash
Starting instance 192.168.31.57:9000
Start instance 192.168.31.57:9000 success
Starting component prometheus
Starting instance 192.168.31.57:9090
Start instance 192.168.31.57:9090 success
Starting component grafana
Starting instance 192.168.31.57:3000
Start instance 192.168.31.57:3000 success
Starting component alertmanager
Starting instance 192.168.31.57:9093
Start instance 192.168.31.57:9093 success
Starting component node_exporter
Starting instance 192.168.31.52
Starting instance 192.168.31.55
Starting instance 192.168.31.57
Starting instance 192.168.31.51
Starting instance 192.168.31.50
Starting instance 192.168.31.54
Starting instance 192.168.31.53
Start 192.168.31.52 success
Start 192.168.31.54 success
Start 192.168.31.55 success
Start 192.168.31.53 success
Start 192.168.31.50 success
Start 192.168.31.51 success
Start 192.168.31.57 success
Starting component blackbox_exporter
Starting instance 192.168.31.52
Starting instance 192.168.31.55
Starting instance 192.168.31.50
Starting instance 192.168.31.51
Starting instance 192.168.31.54
Starting instance 192.168.31.53
Starting instance 192.168.31.57
Start 192.168.31.52 success
Start 192.168.31.55 success
Start 192.168.31.53 success
Start 192.168.31.54 success
Start 192.168.31.51 success
Start 192.168.31.50 success
Start 192.168.31.57 success
+ [ Serial ] - UpdateTopology: cluster=tidb-lab
Started cluster `tidb-lab` successfully
The root password of TiDB database has been changed.
The new password is: 'g@7Qa^2tbxU_w3510+'.
Copy and record it to somewhere safe, it is only displayed once, and will not be stored.
The generated password can NOT be get and shown again.
TIDB数据库默认密码为g@7Qa^2tbxU_w3510+ 尝试使用myql命令修改密码，使用如下命令，修改后的密码为P@ssw0rd
tom@Toms-MBP ~ % mysql -h 192.168.31.50 -P 4000 -u root -pg@7Qa^2tbxU_w3510+
mysql: [Warning] Using a password on the command line interface can be insecure.
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 409
Server version: 5.7.25-TiDB-v7.1.0 TiDB Server (Apache License 2.0) Community Edition, MySQL 5.7 compatible
Copyright (c) 2000, 2023, Oracle and/or its affiliates.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> set password = password ('P@ssw0rd');
Query OK, 0 rows affected (0.11 sec)
mysql>
再次尝试以修改的密码登录此数据库，测试可以正常登陆
tom@Toms-MBP ~ % mysql -h 192.168.31.50 -P 4000 -u root -pP@ssw0rd
tom@Toms-MBP ~ % mysql -h 192.168.31.50 -P 4000 -u root -pP@ssw0rd
mysql: [Warning] Using a password on the command line interface can be insecure.
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 411
Server version: 5.7.25-TiDB-v7.1.0 TiDB Server (Apache License 2.0) Community Edition, MySQL 5.7 compatible
Copyright (c) 2000, 2023, Oracle and/or its affiliates.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> show databases;
+--------------------+
| Database |
+--------------------+
| INFORMATION_SCHEMA |
| METRICS_SCHEMA |
| PERFORMANCE_SCHEMA |
| mysql |
| test |
+--------------------+
5 rows in set (0.01 sec)
使用工具进入登录如下图
通过tiup cluster display tidb-lab 命令查看当前集群状态信息，如下图
[root@192_168_31_50_TiDB tidb-community-server-v7.1.0-linux-amd64]# tiup cluster display tidb-lab
tiup is checking updates for component cluster ...
Starting component `cluster`: /root/.tiup/components/cluster/v1.12.2/tiup-cluster display tidb-lab
Cluster type: tidb
Cluster name: tidb-lab
Cluster version: v7.1.0
Deploy user: tidb
SSH type: builtin
Dashboard URL: http://192.168.31.51:2379/dashboard
Grafana URL: http://192.168.31.57:3000
ID Role Host Ports OS/Arch Status Data Dir Deploy Dir
-- ---- ---- ----- ------- ------ -------- ----------
192.168.31.57:9093 alertmanager 192.168.31.57 9093/9094 linux/x86_64 Up /tidb-data/alertmanager-9093 /tidb-deploy/alertmanager-9093
192.168.31.57:3000 grafana 192.168.31.57 3000 linux/x86_64 Up - /tidb-deploy/grafana-3000
192.168.31.51:2379 pd 192.168.31.51 2379/2380 linux/x86_64 Up|L|UI /tidb-data/pd-2379 /tidb-deploy/pd-2379
192.168.31.52:2379 pd 192.168.31.52 2379/2380 linux/x86_64 Up /tidb-data/pd-2379 /tidb-deploy/pd-2379
192.168.31.57:9090 prometheus 192.168.31.57 9090/12020 linux/x86_64 Up /tidb-data/prometheus-9090 /tidb-deploy/prometheus-9090
192.168.31.50:4000 tidb 192.168.31.50 4000/10080 linux/x86_64 Up - /tidb-deploy/tidb-4000
192.168.31.57:9000 tiflash 192.168.31.57 9000/8123/3930/20170/20292/8234 linux/x86_64 Up /tidb-data/tiflash-9000 /tidb-deploy/tiflash-9000
192.168.31.53:20160 tikv 192.168.31.53 20160/20180 linux/x86_64 Up /tidb-data/tikv-20160 /tidb-deploy/tikv-20160
192.168.31.54:20160 tikv 192.168.31.54 20160/20180 linux/x86_64 Up /tidb-data/tikv-20160 /tidb-deploy/tikv-20160
192.168.31.55:20160 tikv 192.168.31.55 20160/20180 linux/x86_64 Up /tidb-data/tikv-20160 /tidb-deploy/tikv-20160
GC 状态面板
tom@Toms-MBP ~ % mysql -h 192.168.31.50 -P 4000 -u root -pP@ssw0rd
mysql: [Warning] Using a password on the command line interface can be insecure.
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 521
Server version: 5.7.25-TiDB-v7.1.0 TiDB Server (Apache License 2.0) Community Edition, MySQL 5.7 compatible
Copyright (c) 2000, 2023, Oracle and/or its affiliates.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> select * from mysql.tidb;
+--------------------------+-----------------------------------------------------------------------------------------------------+---------------------------------------------------------------------------------------------+
| VARIABLE_NAME | VARIABLE_VALUE | COMMENT |
+--------------------------+-----------------------------------------------------------------------------------------------------+---------------------------------------------------------------------------------------------+
| bootstrapped | True | Bootstrap flag. Do not delete. |
| tidb_server_version | 146 | Bootstrap version. Do not delete. |
| system_tz | Asia/Shanghai | TiDB Global System Timezone. |
| new_collation_enabled | True | If the new collations are enabled. Do not edit it. |
| tikv_gc_leader_uuid | 622259489f40009 | Current GC worker leader UUID. (DO NOT EDIT) |
| tikv_gc_leader_desc | host:192_168_31_50_TiDB, pid:8607, start at 2023-06-05 10:31:26.645091475 +0800 CST m=+41.567402185 | Host name and pid of current GC leader. (DO NOT EDIT) |
| tikv_gc_leader_lease | 20230605-11:05:26.931 +0800 | Current GC worker leader lease. (DO NOT EDIT) |
| tikv_gc_auto_concurrency | true | Let TiDB pick the concurrency automatically. If set false, tikv_gc_concurrency will be used |
| tikv_gc_enable | true | Current GC enable status |
| tikv_gc_run_interval | 10m0s | GC run interval, at least 10m, in Go format. |
| tikv_gc_life_time | 10m0s | All versions within life time will not be collected by GC, at least 10m, in Go format. |
| tikv_gc_last_run_time | 20230605-11:02:26.989 +0800 | The time when last GC starts. (DO NOT EDIT) |
| tikv_gc_safe_point | 20230605-10:52:26.989 +0800 | All versions after safe point can be accessed. (DO NOT EDIT) |
| tikv_gc_scan_lock_mode | legacy | Mode of scanning locks, "physical" or "legacy" |
| tikv_gc_mode | distributed | Mode of GC, "central" or "distributed" |
+--------------------------+-----------------------------------------------------------------------------------------------------+---------------------------------------------------------------------------------------------+
15 rows in set (0.00 sec)
登录 Dashboard URL页面 http://192.168.31.51:2379/dashboard，用户名:root密码:P@ssw0rd，下图为集群信息页面
Dashboard中的集群信息，截图如下： 
Dashboard中的监控指标信息，指标信息项目截图如下：
在线扩容操作，此操作把192.168.31.56扩容到TiKV里面，最终形成4台TiKV场景 首选编辑在线扩容文件，操作如下
[root@192_168_31_50_TiDB tidb-community-server-v7.1.0-linux-amd64]# vim scale-out.yml
tikv_servers:
- host: 192.168.31.56
ssh_port: 22
port: 20160
status_port: 20180
deploy_dir: /tidb-deploy/tikv-20160
data_dir: /tidb-data/tikv-20160
log_dir: /tidb-deploy/tikv-20160/log
查看当前集群配置文件信息，操作如下
[root@192_168_31_50_TiDB tidb-community-server-v7.1.0-linux-amd64]# tiup cluster edit-config tidb-lab
global:
user: tidb
ssh_port: 22
ssh_type: builtin
deploy_dir: /tidb-deploy
data_dir: /tidb-data
os: linux
arch: amd64
monitored:
node_exporter_port: 9100
blackbox_exporter_port: 9115
deploy_dir: /tidb-deploy/monitor-9100
data_dir: /tidb-data/monitor-9100
log_dir: /tidb-deploy/monitor-9100/log
tidb_servers:
- host: 192.168.31.50
ssh_port: 22
port: 4000
status_port: 10080
deploy_dir: /tidb-deploy/tidb-4000
log_dir: /tidb-deploy/tidb-4000/log
arch: amd64
os: linux
tikv_servers:
- host: 192.168.31.53
ssh_port: 22
port: 20160
status_port: 20180
deploy_dir: /tidb-deploy/tikv-20160
data_dir: /tidb-data/tikv-20160
log_dir: /tidb-deploy/tikv-20160/log
arch: amd64
os: linux
- host: 192.168.31.54
ssh_port: 22
port: 20160
status_port: 20180
deploy_dir: /tidb-deploy/tikv-20160
data_dir: /tidb-data/tikv-20160
log_dir: /tidb-deploy/tikv-20160/log
arch: amd64
os: linux
- host: 192.168.31.55
ssh_port: 22
port: 20160
status_port: 20180
deploy_dir: /tidb-deploy/tikv-20160
data_dir: /tidb-data/tikv-20160
log_dir: /tidb-deploy/tikv-20160/log
arch: amd64
os: linux
tiflash_servers:
- host: 192.168.31.57
ssh_port: 22
tcp_port: 9000
http_port: 8123
flash_service_port: 3930
flash_proxy_port: 20170
flash_proxy_status_port: 20292
metrics_port: 8234
deploy_dir: /tidb-deploy/tiflash-9000
data_dir: /tidb-data/tiflash-9000
log_dir: /tidb-deploy/tiflash-9000/log
arch: amd64
os: linux
pd_servers:
- host: 192.168.31.51
ssh_port: 22
name: pd-192.168.31.51-2379
client_port: 2379
peer_port: 2380
deploy_dir: /tidb-deploy/pd-2379
data_dir: /tidb-data/pd-2379
log_dir: /tidb-deploy/pd-2379/log
arch: amd64
os: linux
- host: 192.168.31.52
ssh_port: 22
name: pd-192.168.31.52-2379
client_port: 2379
peer_port: 2380
deploy_dir: /tidb-deploy/pd-2379
data_dir: /tidb-data/pd-2379
log_dir: /tidb-deploy/pd-2379/log
arch: amd64
os: linux
monitoring_servers:
- host: 192.168.31.57
ssh_port: 22
port: 9090
ng_port: 12020
deploy_dir: /tidb-deploy/prometheus-9090
data_dir: /tidb-data/prometheus-9090
log_dir: /tidb-deploy/prometheus-9090/log
external_alertmanagers: []
arch: amd64
os: linux
grafana_servers:
- host: 192.168.31.57
ssh_port: 22
port: 3000
deploy_dir: /tidb-deploy/grafana-3000
arch: amd64
os: linux
username: admin
password: admin
anonymous_enable: false
root_url: ""
domain: ""
alertmanager_servers:
- host: 192.168.31.57
ssh_port: 22
web_port: 9093
cluster_port: 9094
deploy_dir: /tidb-deploy/alertmanager-9093
data_dir: /tidb-data/alertmanager-9093
log_dir: /tidb-deploy/alertmanager-9093/log
arch: amd64
os: linux
执行扩容操作前，如下命令进行检查合规：
[root@192_168_31_50_TiDB tidb-community-server-v7.1.0-linux-amd64]# tiup cluster check tidb-lab scale-out.yml --cluster --user root -p
检查合规同时执行修复命令如下：
[root@192_168_31_50_TiDB tidb-community-server-v7.1.0-linux-amd64]# tiup cluster check tidb-lab scale-out.yml --cluster --apply --user root -p
执行扩容TiKV的配置文件，如下命令：
[root@192_168_31_50_TiDB tidb-community-server-v7.1.0-linux-amd64]# tiup cluster scale-out tidb-lab scale-out.yml -p
[root@192_168_31_50_TiDB tidb-community-server-v7.1.0-linux-amd64]# tiup cluster scale-out tidb-lab scale-out.yml -p
tiup is checking updates for component cluster ...
Starting component `cluster`: /root/.tiup/components/cluster/v1.12.2/tiup-cluster scale-out tidb-lab scale-out.yml -p
Input SSH password:
+ Detect CPU Arch Name
- Detecting node 192.168.31.56 Arch info ... Done
+ Detect CPU OS Name
- Detecting node 192.168.31.56 OS info ... Done
Please confirm your topology:
Cluster type: tidb
Cluster name: tidb-lab
Cluster version: v7.1.0
Role Host Ports OS/Arch Directories
---- ---- ----- ------- -----------
tikv 192.168.31.56 20160/20180 linux/x86_64 /tidb-deploy/tikv-20160,/tidb-data/tikv-20160
Attention:
1. If the topology is not what you expected, check your yaml file.
2. Please confirm there is no port/directory conflicts in same host.
Do you want to continue? [y/N]: (default=N) y
+ [ Serial ] - SSHKeySet: privateKey=/root/.tiup/storage/cluster/clusters/tidb-lab/ssh/id_rsa, publicKey=/root/.tiup/storage/cluster/clusters/tidb-lab/ssh/id_rsa.pub
+ [Parallel] - UserSSH: user=tidb, host=192.168.31.55
+ [Parallel] - UserSSH: user=tidb, host=192.168.31.52
+ [Parallel] - UserSSH: user=tidb, host=192.168.31.50
+ [Parallel] - UserSSH: user=tidb, host=192.168.31.57
+ [Parallel] - UserSSH: user=tidb, host=192.168.31.53
+ [Parallel] - UserSSH: user=tidb, host=192.168.31.57
+ [Parallel] - UserSSH: user=tidb, host=192.168.31.54
+ [Parallel] - UserSSH: user=tidb, host=192.168.31.57
+ [Parallel] - UserSSH: user=tidb, host=192.168.31.57
+ [Parallel] - UserSSH: user=tidb, host=192.168.31.51
+ Download TiDB components
- Download tikv:v7.1.0 (linux/amd64) ... Done
- Download node_exporter: (linux/amd64) ... Done
- Download blackbox_exporter: (linux/amd64) ... Done
+ Initialize target host environments
- Initialized host 192.168.31.56 ... Done
+ Deploy TiDB instance
- Deploy instance tikv -> 192.168.31.56:20160 ... Done
- Deploy node_exporter -> 192.168.31.56 ... Done
- Deploy blackbox_exporter -> 192.168.31.56 ... Done
+ Copy certificate to remote host
+ Generate scale-out config
- Generate scale-out config tikv -> 192.168.31.56:20160 ... Done
+ Init monitor config
- Generate config node_exporter -> 192.168.31.56 ... Done
- Generate config blackbox_exporter -> 192.168.31.56 ... Done
Enabling component tikv
Enabling instance 192.168.31.56:20160
Enable instance 192.168.31.56:20160 success
Enabling component node_exporter
Enabling instance 192.168.31.56
Enable 192.168.31.56 success
Enabling component blackbox_exporter
Enabling instance 192.168.31.56
Enable 192.168.31.56 success
+ [ Serial ] - Save meta
+ [ Serial ] - Start new instances
Starting component tikv
Starting instance 192.168.31.56:20160
Start instance 192.168.31.56:20160 success
Starting component node_exporter
Starting instance 192.168.31.56
Start 192.168.31.56 success
Starting component blackbox_exporter
Starting instance 192.168.31.56
Start 192.168.31.56 success
+ Refresh components conifgs
- Generate config pd -> 192.168.31.51:2379 ... Done
- Generate config pd -> 192.168.31.52:2379 ... Done
- Generate config tikv -> 192.168.31.53:20160 ... Done
- Generate config tikv -> 192.168.31.54:20160 ... Done
- Generate config tikv -> 192.168.31.55:20160 ... Done
- Generate config tikv -> 192.168.31.56:20160 ... Done
- Generate config tidb -> 192.168.31.50:4000 ... Done
- Generate config tiflash -> 192.168.31.57:9000 ... Done
- Generate config prometheus -> 192.168.31.57:9090 ... Done
- Generate config grafana -> 192.168.31.57:3000 ... Done
- Generate config alertmanager -> 192.168.31.57:9093 ... Done
+ Reload prometheus and grafana
- Reload prometheus -> 192.168.31.57:9090 ... Done
- Reload grafana -> 192.168.31.57:3000 ... Done
+ [ Serial ] - UpdateTopology: cluster=tidb-lab
Scaled cluster `tidb-lab` out successfully
执行tiup cluster display tidb-lab命令查看，扩容后结果信息，可以看到192.168.31.56成功扩容到tikv.
[root@192_168_31_50_TiDB tidb-community-server-v7.1.0-linux-amd64]# tiup cluster display tidb-lab
tiup is checking updates for component cluster ...
Starting component `cluster`: /root/.tiup/components/cluster/v1.12.2/tiup-cluster display tidb-lab
Cluster type: tidb
Cluster name: tidb-lab
Cluster version: v7.1.0
Deploy user: tidb
SSH type: builtin
Dashboard URL: http://192.168.31.51:2379/dashboard
Grafana URL: http://192.168.31.57:3000
ID Role Host Ports OS/Arch Status Data Dir Deploy Dir
-- ---- ---- ----- ------- ------ -------- ----------
192.168.31.57:9093 alertmanager 192.168.31.57 9093/9094 linux/x86_64 Up /tidb-data/alertmanager-9093 /tidb-deploy/alertmanager-9093
192.168.31.57:3000 grafana 192.168.31.57 3000 linux/x86_64 Up - /tidb-deploy/grafana-3000
192.168.31.51:2379 pd 192.168.31.51 2379/2380 linux/x86_64 Up|L|UI /tidb-data/pd-2379 /tidb-deploy/pd-2379
192.168.31.52:2379 pd 192.168.31.52 2379/2380 linux/x86_64 Up /tidb-data/pd-2379 /tidb-deploy/pd-2379
192.168.31.57:9090 prometheus 192.168.31.57 9090/12020 linux/x86_64 Up /tidb-data/prometheus-9090 /tidb-deploy/prometheus-9090
192.168.31.50:4000 tidb 192.168.31.50 4000/10080 linux/x86_64 Up - /tidb-deploy/tidb-4000
192.168.31.57:9000 tiflash 192.168.31.57 9000/8123/3930/20170/20292/8234 linux/x86_64 Up /tidb-data/tiflash-9000 /tidb-deploy/tiflash-9000
192.168.31.53:20160 tikv 192.168.31.53 20160/20180 linux/x86_64 Up /tidb-data/tikv-20160 /tidb-deploy/tikv-20160
192.168.31.54:20160 tikv 192.168.31.54 20160/20180 linux/x86_64 Up /tidb-data/tikv-20160 /tidb-deploy/tikv-20160
192.168.31.55:20160 tikv 192.168.31.55 20160/20180 linux/x86_64 Up /tidb-data/tikv-20160 /tidb-deploy/tikv-20160
192.168.31.56:20160 tikv 192.168.31.56 20160/20180 linux/x86_64 Up /tidb-data/tikv-20160 /tidb-deploy/tikv-20160
Total nodes: 11
通过TiDB Dashboard查看集群信息，可以看到TiKV节点原3节点扩容成4节点。
数据迁移测试，从 MySql --> TiDB 数据导入测试，环境信息介绍，目前有mysql数据
| 序号 | 地址 | 数据库类型 | 数据库版本 | 数据库名 | 账号 | 密码 | | -- | ------------- | ----- | ------ | -------- | -------- | --------- | | 1 | 192.168.31.13 | mysql | 5.7.40 | jsh_erp | jsh_erp | P@ssw0rd | | 2 | 192.168.31.50 | TiDB | 7.1.0 | | root | P@ssw0rd |
进入TiDB主机把相关迁移工具配置好，并完成环境变量的配置 数据迁出工具使用Dumpling
| 使用场景 | 用于将数据从 MySQL/TiDB 进行全量导出 |
|---|---|
| 上游 | MySQL，TiDB |
| 下游（输出文件） | SQL，CSV |
| 主要优势 | * 支持全新的 table-filter，筛选数据更加方便 |
- 支持导出到 Amazon S3 云盘| |使用限制|* 如果导出后计划往非 TiDB 的数据库恢复，建议使用 Dumpling。
- 如果导出后计划往另一个 TiDB 恢复，建议使用BR|
数据迁入工具使用TiDB Lightning
| 使用场景 | 用于将数据全量导入到 TiDB |
|---|---|
| 上游（输入源文件） | * Dumpling 输出的文件 |
- 从 Amazon Aurora 或 Apache Hive 导出的 Parquet 文件
- CSV 文件
- 从本地盘或 Amazon S3 云盘读取数据| |下游|TiDB| |主要优势|* 支持快速导入大量数据，实现快速初始化 TiDB 集群的指定表
- 支持断点续传
- 支持数据过滤| |使用限制|* 如果使用
物理导入模式
进行数据导入，TiDB Lightning 运行后，TiDB 集群将无法正常对外提供服务。
- 如果你不希望 TiDB 集群的对外服务受到影响，可以参考 TiDB Lightning
逻辑导入模式
中的硬件需求与部署方式进行数据导入。
解压dumping与tidb-lightning包文件，如命令如下
[root@192_168_31_50_TiDB tidb-community-toolkit-v7.1.0-linux-amd64]# tar -xvf dumpling-v7.1.0-linux-amd64.tar.gz
[root@192_168_31_50_TiDB tidb-community-toolkit-v7.1.0-linux-amd64]# tar -xvf tidb-lightning-v7.1.0-linux-amd64.tar.gz
配置环境变量，让dumping与tidb-lightning命令生效，新增内容为:/tidb-setup/tidb-community-toolkit-v7.1.0-linux-amd64，完成后如下信息：
[root@192_168_31_50_TiDB tidb-community-toolkit-v7.1.0-linux-amd64]# vim /root/.bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
export PATH=/root/.tiup/bin:/tidb-setup/tidb-community-toolkit-v7.1.0-linux-amd64:$PATH
数据导出位置/dumping_erp_db
[root@192_168_31_50_TiDB /]# mkdir dumping_erp_db
利用dumping命令把192.168.31.13的jsh_erp数据库导出在/dumping_erp_db文件夹中，命令如下：
[root@192_168_31_50_TiDB /]# dumpling -h192.168.31.13 -ujsh_erp -p'P@ssw0rd' -P3306 --filetype sql -t 2 -o /dumpling_erp_db/ -r 20000 -F 256MiB -B jsh_erp
执行结果，如下信息 [2023/06/05 12:20:42.298 +08:00] [INFO] [main.go:82] ["dump data successfully, dumpling will exit now"]
Release version: v7.1.0
Git commit hash: 635a4362235e8a3c0043542e629532e3c7bb2756
Git branch: heads/refs/tags/v7.1.0
Build timestamp: 2023-05-30 10:51:41Z
Go version: go version go1.20.3 linux/amd64
[2023/06/05 12:20:42.057 +08:00] [INFO] [versions.go:54] ["Welcome to dumpling"] ["Release Version"=v7.1.0] ["Git Commit Hash"=635a4362235e8a3c0043542e629532e3c7bb2756] ["Git Branch"=heads/refs/tags/v7.1.0] ["Build timestamp"="2023-05-30 10:51:41"] ["Go Version"="go version go1.20.3 linux/amd64"]
[2023/06/05 12:20:42.066 +08:00] [WARN] [version.go:322] ["select tidb_version() failed, will fallback to 'select version();'"] [error="Error 1046 (3D000): No database selected"]
[2023/06/05 12:20:42.067 +08:00] [INFO] [version.go:429] ["detect server version"] [type=MySQL] [version=5.7.40-log]
[2023/06/05 12:20:42.067 +08:00] [WARN] [dump.go:1421] ["error when use FLUSH TABLE WITH READ LOCK, fallback to LOCK TABLES"] [error="sql: FLUSH TABLES WITH READ LOCK: Error 1227 (42000): Access denied; you need (at least one of) the RELOAD privilege(s) for this operation"] [errorVerbose="Error 1227 (42000): Access denied; you need (at least one of) the RELOAD privilege(s) for this operation\nsql: FLUSH TABLES WITH READ LOCK\ngithub.com/pingcap/tidb/dumpling/export.FlushTableWithReadLock\n\tgithub.com/pingcap/tidb/dumpling/export/sql.go:619\ngithub.com/pingcap/tidb/dumpling/export.resolveAutoConsistency\n\tgithub.com/pingcap/tidb/dumpling/export/dump.go:1416\ngithub.com/pingcap/tidb/dumpling/export.runSteps\n\tgithub.com/pingcap/tidb/dumpling/export/dump.go:1290\ngithub.com/pingcap/tidb/dumpling/export.NewDumper\n\tgithub.com/pingcap/tidb/dumpling/export/dump.go:124\nmain.main\n\t./main.go:70\nruntime.main\n\truntime/proc.go:250\nruntime.goexit\n\truntime/asm_amd64.s:1598"]
[2023/06/05 12:20:42.074 +08:00] [INFO] [dump.go:151] ["begin to run Dump"] [conf="{\"s3\":{\"endpoint\":\"\",\"region\":\"\",\"storage-class\":\"\",\"sse\":\"\",\"sse-kms-key-id\":\"\",\"acl\":\"\",\"access-key\":\"\",\"secret-access-key\":\"\",\"session-token\":\"\",\"provider\":\"\",\"force-path-style\":true,\"use-accelerate-endpoint\":false,\"role-arn\":\"\",\"external-id\":\"\",\"object-lock-enabled\":false},\"gcs\":{\"endpoint\":\"\",\"storage-class\":\"\",\"predefined-acl\":\"\",\"credentials-file\":\"\"},\"azblob\":{\"endpoint\":\"\",\"account-name\":\"\",\"account-key\":\"\",\"access-tier\":\"\"},\"AllowCleartextPasswords\":false,\"SortByPk\":true,\"NoViews\":true,\"NoSequences\":true,\"NoHeader\":false,\"NoSchemas\":false,\"NoData\":false,\"CompleteInsert\":false,\"TransactionalConsistency\":true,\"EscapeBackslash\":true,\"DumpEmptyDatabase\":true,\"PosAfterConnect\":false,\"CompressType\":0,\"Host\":\"192.168.31.13\",\"Port\":3306,\"Threads\":2,\"User\":\"jsh_erp\",\"Security\":{\"CAPath\":\"\",\"CertPath\":\"\",\"KeyPath\":\"\"},\"LogLevel\":\"info\",\"LogFile\":\"\",\"LogFormat\":\"text\",\"OutputDirPath\":\"/dumpling_erp_db/\",\"StatusAddr\":\":8281\",\"Snapshot\":\"\",\"Consistency\":\"lock\",\"CsvNullValue\":\"\\\\N\",\"SQL\":\"\",\"CsvSeparator\":\",\",\"CsvDelimiter\":\"\\\"\",\"Databases\":[\"jsh_erp\"],\"Where\":\"\",\"FileType\":\"sql\",\"ServerInfo\":{\"ServerType\":1,\"ServerVersion\":\"5.7.40-log\",\"HasTiKV\":false},\"Rows\":20000,\"ReadTimeout\":900000000000,\"TiDBMemQuotaQuery\":0,\"FileSize\":268435456,\"StatementSize\":1000000,\"SessionParams\":{},\"Tables\":{},\"CollationCompatible\":\"loose\",\"IOTotalBytes\":null,\"Net\":\"\"}"]
[2023/06/05 12:20:42.097 +08:00] [INFO] [dump.go:204] ["get global metadata failed"] [error="sql: SHOW MASTER STATUS: sql: SHOW MASTER STATUS, args: []: Error 1227 (42000): Access denied; you need (at least one of) the SUPER, REPLICATION CLIENT privilege(s) for this operation"]
[2023/06/05 12:20:42.109 +08:00] [INFO] [dump.go:275] ["All the dumping transactions have started. Start to unlock tables"]
[2023/06/05 12:20:42.115 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_account] [estimateCount=4]
[2023/06/05 12:20:42.115 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=4] [conf.rows=20000] [database=jsh_erp] [table=jsh_account]
[2023/06/05 12:20:42.126 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_account_head] [estimateCount=6]
[2023/06/05 12:20:42.127 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=6] [conf.rows=20000] [database=jsh_erp] [table=jsh_account_head]
[2023/06/05 12:20:42.132 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_account_item] [estimateCount=6]
[2023/06/05 12:20:42.132 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=6] [conf.rows=20000] [database=jsh_erp] [table=jsh_account_item]
[2023/06/05 12:20:42.136 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_depot] [estimateCount=3]
[2023/06/05 12:20:42.136 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=3] [conf.rows=20000] [database=jsh_erp] [table=jsh_depot]
[2023/06/05 12:20:42.144 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_depot_head] [estimateCount=108]
[2023/06/05 12:20:42.144 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=108] [conf.rows=20000] [database=jsh_erp] [table=jsh_depot_head]
[2023/06/05 12:20:42.150 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_depot_item] [estimateCount=2232]
[2023/06/05 12:20:42.150 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=2232] [conf.rows=20000] [database=jsh_erp] [table=jsh_depot_item]
[2023/06/05 12:20:42.154 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_function] [estimateCount=62]
[2023/06/05 12:20:42.154 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=62] [conf.rows=20000] [database=jsh_erp] [table=jsh_function]
[2023/06/05 12:20:42.158 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_in_out_item] [estimateCount=3]
[2023/06/05 12:20:42.158 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=3] [conf.rows=20000] [database=jsh_erp] [table=jsh_in_out_item]
[2023/06/05 12:20:42.162 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_log] [estimateCount=823]
[2023/06/05 12:20:42.162 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=823] [conf.rows=20000] [database=jsh_erp] [table=jsh_log]
[2023/06/05 12:20:42.167 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_material] [estimateCount=415]
[2023/06/05 12:20:42.167 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=415] [conf.rows=20000] [database=jsh_erp] [table=jsh_material]
[2023/06/05 12:20:42.172 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_material_attribute] [estimateCount=5]
[2023/06/05 12:20:42.172 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=5] [conf.rows=20000] [database=jsh_erp] [table=jsh_material_attribute]
[2023/06/05 12:20:42.176 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_material_category] [estimateCount=8]
[2023/06/05 12:20:42.176 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=8] [conf.rows=20000] [database=jsh_erp] [table=jsh_material_category]
[2023/06/05 12:20:42.180 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_material_current_stock] [estimateCount=418]
[2023/06/05 12:20:42.180 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=418] [conf.rows=20000] [database=jsh_erp] [table=jsh_material_current_stock]
[2023/06/05 12:20:42.184 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_material_extend] [estimateCount=492]
[2023/06/05 12:20:42.185 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=492] [conf.rows=20000] [database=jsh_erp] [table=jsh_material_extend]
[2023/06/05 12:20:42.203 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_material_initial_stock] [estimateCount=47]
[2023/06/05 12:20:42.203 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=47] [conf.rows=20000] [database=jsh_erp] [table=jsh_material_initial_stock]
[2023/06/05 12:20:42.224 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_material_property] [estimateCount=4]
[2023/06/05 12:20:42.224 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=4] [conf.rows=20000] [database=jsh_erp] [table=jsh_material_property]
[2023/06/05 12:20:42.233 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_msg] [estimateCount=1]
[2023/06/05 12:20:42.233 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=1] [conf.rows=20000] [database=jsh_erp] [table=jsh_msg]
[2023/06/05 12:20:42.237 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_orga_user_rel] [estimateCount=8]
[2023/06/05 12:20:42.237 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=8] [conf.rows=20000] [database=jsh_erp] [table=jsh_orga_user_rel]
[2023/06/05 12:20:42.242 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_organization] [estimateCount=4]
[2023/06/05 12:20:42.242 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=4] [conf.rows=20000] [database=jsh_erp] [table=jsh_organization]
[2023/06/05 12:20:42.246 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_person] [estimateCount=4]
[2023/06/05 12:20:42.246 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=4] [conf.rows=20000] [database=jsh_erp] [table=jsh_person]
[2023/06/05 12:20:42.250 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_platform_config] [estimateCount=8]
[2023/06/05 12:20:42.250 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=8] [conf.rows=20000] [database=jsh_erp] [table=jsh_platform_config]
[2023/06/05 12:20:42.256 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_role] [estimateCount=4]
[2023/06/05 12:20:42.256 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=4] [conf.rows=20000] [database=jsh_erp] [table=jsh_role]
[2023/06/05 12:20:42.260 +08:00] [INFO] [dump.go:755] ["fallback to sequential dump due to no proper field. This won't influence the whole dump process"] [database=jsh_erp] [table=jsh_sequence] []
[2023/06/05 12:20:42.265 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_serial_number] [estimateCount=3]
[2023/06/05 12:20:42.266 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=3] [conf.rows=20000] [database=jsh_erp] [table=jsh_serial_number]
[2023/06/05 12:20:42.271 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_supplier] [estimateCount=31]
[2023/06/05 12:20:42.272 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=31] [conf.rows=20000] [database=jsh_erp] [table=jsh_supplier]
[2023/06/05 12:20:42.277 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_system_config] [estimateCount=1]
[2023/06/05 12:20:42.277 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=1] [conf.rows=20000] [database=jsh_erp] [table=jsh_system_config]
[2023/06/05 12:20:42.281 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_tenant] [estimateCount=1]
[2023/06/05 12:20:42.282 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=1] [conf.rows=20000] [database=jsh_erp] [table=jsh_tenant]
[2023/06/05 12:20:42.287 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_unit] [estimateCount=4]
[2023/06/05 12:20:42.287 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=4] [conf.rows=20000] [database=jsh_erp] [table=jsh_unit]
[2023/06/05 12:20:42.291 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_user] [estimateCount=4]
[2023/06/05 12:20:42.291 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=4] [conf.rows=20000] [database=jsh_erp] [table=jsh_user]
[2023/06/05 12:20:42.296 +08:00] [INFO] [dump.go:761] ["get estimated rows count"] [database=jsh_erp] [table=jsh_user_business] [estimateCount=41]
[2023/06/05 12:20:42.296 +08:00] [INFO] [dump.go:767] ["fallback to sequential dump due to estimate count < rows. This won't influence the whole dump process"] ["estimate count"=41] [conf.rows=20000] [database=jsh_erp] [table=jsh_user_business]
[2023/06/05 12:20:42.297 +08:00] [INFO] [collector.go:264] ["backup success summary"] [total-ranges=61] [ranges-succeed=61] [ranges-failed=0] [total-take=187.802008ms] [total-rows=5165] [total-kv-size=666.7kB] [average-speed=3.55MB/s]
[2023/06/05 12:20:42.298 +08:00] [INFO] [main.go:82] ["dump data successfully, dumpling will exit now"]
进入/dumpling_erp_db文件夹中查看导出的数据，如下图
[root@192_168_31_50_TiDB /]# cd /dumpling_erp_db/
[root@192_168_31_50_TiDB dumpling_erp_db]# ls
jsh_erp-schema-create.sql jsh_erp.jsh_material_attribute-schema.sql jsh_erp.jsh_platform_config.0000000000000.sql
jsh_erp.jsh_account-schema.sql jsh_erp.jsh_material_attribute.0000000000000.sql jsh_erp.jsh_role-schema.sql
jsh_erp.jsh_account.0000000000000.sql jsh_erp.jsh_material_category-schema.sql jsh_erp.jsh_role.0000000000000.sql
jsh_erp.jsh_account_head-schema.sql jsh_erp.jsh_material_category.0000000000000.sql jsh_erp.jsh_sequence-schema.sql
jsh_erp.jsh_account_head.0000000000000.sql jsh_erp.jsh_material_current_stock-schema.sql jsh_erp.jsh_sequence.0000000000000.sql
jsh_erp.jsh_account_item-schema.sql jsh_erp.jsh_material_current_stock.0000000000000.sql jsh_erp.jsh_serial_number-schema.sql
jsh_erp.jsh_account_item.0000000000000.sql jsh_erp.jsh_material_extend-schema.sql jsh_erp.jsh_serial_number.0000000000000.sql
jsh_erp.jsh_depot-schema.sql jsh_erp.jsh_material_extend.0000000000000.sql jsh_erp.jsh_supplier-schema.sql
jsh_erp.jsh_depot.0000000000000.sql jsh_erp.jsh_material_initial_stock-schema.sql jsh_erp.jsh_supplier.0000000000000.sql
jsh_erp.jsh_depot_head-schema.sql jsh_erp.jsh_material_initial_stock.0000000000000.sql jsh_erp.jsh_system_config-schema.sql
jsh_erp.jsh_depot_head.0000000000000.sql jsh_erp.jsh_material_property-schema.sql jsh_erp.jsh_system_config.0000000000000.sql
jsh_erp.jsh_depot_item-schema.sql jsh_erp.jsh_material_property.0000000000000.sql jsh_erp.jsh_tenant-schema.sql
jsh_erp.jsh_depot_item.0000000000000.sql jsh_erp.jsh_msg-schema.sql jsh_erp.jsh_tenant.0000000000000.sql
jsh_erp.jsh_function-schema.sql jsh_erp.jsh_msg.0000000000000.sql jsh_erp.jsh_unit-schema.sql
jsh_erp.jsh_function.0000000000000.sql jsh_erp.jsh_orga_user_rel-schema.sql jsh_erp.jsh_unit.0000000000000.sql
jsh_erp.jsh_in_out_item-schema.sql jsh_erp.jsh_orga_user_rel.0000000000000.sql jsh_erp.jsh_user-schema.sql
jsh_erp.jsh_in_out_item.0000000000000.sql jsh_erp.jsh_organization-schema.sql jsh_erp.jsh_user.0000000000000.sql
jsh_erp.jsh_log-schema.sql jsh_erp.jsh_organization.0000000000000.sql jsh_erp.jsh_user_business-schema.sql
jsh_erp.jsh_log.0000000000000.sql jsh_erp.jsh_person-schema.sql jsh_erp.jsh_user_business.0000000000000.sql
jsh_erp.jsh_material-schema.sql jsh_erp.jsh_person.0000000000000.sql metadata
jsh_erp.jsh_material.0000000000000.sql jsh_erp.jsh_platform_config-schema.sql
导入数据到TiDB数据库，此次采用的是“逻辑导入”，因为此次数据量小50GB，首先新建Tidb-lightning配置文件，配置文件信息如下：
[lightning]
level = "info"
file = "tidb-lightning.log"
max-size = 128 # MB
max-days = 28
max-backups = 14
check-requirements = true
[mydumper]
data-source-dir = "/dumpling_erp_db"
[tikv-importer]
backend = "tidb"
on-duplicate = "replace"
[tidb]
host = "192.168.31.50"
port = 4000
user = "root"
password = "P@ssw0rd"
log-level = "error"
执行导入命令 tidb-lightning -config tidb-lightning.toml > tidb-lightning.log
[root@192_168_31_50_TiDB tidb-setup]# tidb-lightning -config tidb-lightning.toml > tidb-lightning.log
导入成功后日志如下：
tom@Toms-MBP ~ % mysql -h 192.168.31.50 -P 4000 -u root -pP@ssw0rd
mysql: [Warning] Using a password on the command line interface can be insecure.
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 525
Server version: 5.7.25-TiDB-v7.1.0 TiDB Server (Apache License 2.0) Community Edition, MySQL 5.7 compatible
Copyright (c) 2000, 2023, Oracle and/or its affiliates.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> show databases;
+--------------------+
| Database |
+--------------------+
| INFORMATION_SCHEMA |
| METRICS_SCHEMA |
| PERFORMANCE_SCHEMA |
| mysql |
| test |
+--------------------+
5 rows in set (0.00 sec)
mysql> show databases;
+--------------------+
| Database |
+--------------------+
| INFORMATION_SCHEMA |
| METRICS_SCHEMA |
| PERFORMANCE_SCHEMA |
| jsh_erp |
| mysql |
| test |
+--------------------+
6 rows in set (0.00 sec)
mysql> use jsh_erp
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A
Database changed
mysql> show tables;
+----------------------------+
| Tables_in_jsh_erp |
+----------------------------+
| jsh_account |
| jsh_account_head |
| jsh_account_item |
| jsh_depot |
| jsh_depot_head |
| jsh_depot_item |
| jsh_function |
| jsh_in_out_item |
| jsh_log |
| jsh_material |
| jsh_material_attribute |
| jsh_material_category |
| jsh_material_current_stock |
| jsh_material_extend |
| jsh_material_initial_stock |
| jsh_material_property |
| jsh_msg |
| jsh_orga_user_rel |
| jsh_organization |
| jsh_person |
| jsh_platform_config |
| jsh_role |
| jsh_sequence |
| jsh_serial_number |
| jsh_supplier |
| jsh_system_config |
| jsh_tenant |
| jsh_unit |
| jsh_user |
| jsh_user_business |
+----------------------------+
30 rows in set (0.01 sec)
数据库导入成功，我验证一下原有jsh_erp数据库与TiDB里的jsh_erp是否一致，由于数据库自身较小，本次使用beyong Compare工具进行比对（对比前把原有数据库与现有数据库进行导出），数据对比结果如下图：
