Visual Studio属性与对应cmakelists实现方法
Visual Studio属性与对应cmakelists实现方法
| Visual Studio | Cmake | ||
| Project Reference | add_dependencies() | ||
| General/Output Directory | |||
| Debugging/Working Directory | CMAKE can’t set this value, because the info not stored in project file but some intermedia file generated by visual studio | ||
| c/c++ | General | Additional Include Directories | include_directories() |
| Resolve #using References | Don’t know | ||
| Debug Information Format | CMAKE FAQ set(CMAKE_C_FLAGS_DEBUG_INIT "/D_DEBUG /MTd /Zi /Ob0 /Od /RTC1") set(CMAKE_C_FLAGS_MINSIZEREL_INIT "/MT /O1 /Ob1 /D NDEBUG") set(CMAKE_C_FLAGS_RELEASE_INIT "/MT /O2 /Ob2 /D NDEBUG") set(CMAKE_C_FLAGS_RELWITHDEBINFO_INIT "/MT /Zi /O2 /Ob1 /D NDEBUG") Change the default flags for specific config. |
||
| Common language runtime support | set_target_properties( target PROPERTIES COMPILE_FLAGS “/clr”) set_target_properties( target PROPERTIES COMPILE_FLAGS “/clr:pure”) set_target_properties( target PROPERTIES COMPILE_FLAGS “/clr:safe”) set_target_properties( target PROPERTIES COMPILE_FLAGS “/clr:oldSynax”) |
||
| Suppress Startup Banner | set_target_properties( target PROPERTIES COMPILE_FLAGS “/nologo” ) | ||
| Warning Level | set_target_properties( target PROPERTIES COMPILE_FLAGS “/W0” ) set_target_properties( target PROPERTIES COMPILE_FLAGS “/W1” ) set_target_properties( target PROPERTIES COMPILE_FLAGS “/W2” ) set_target_properties( target PROPERTIES COMPILE_FLAGS “/W3” ) set_target_properties( target PROPERTIES COMPILE_FLAGS "/W4" ) set_target_properties( target PROPERTIES COMPILE_FLAGS “/Wall” ) |
||
| Treat Warnings As Errors | set_target_properties( target PROPERTIES COMPILE_FLAGS “/WX-" ) #No set_target_properties( target PROPERTIES COMPILE_FLAGS “/WX" ) #Yes |
||
| Multi-processor Compilation | set_target_properties( target PROPERTIES COMPILE_FLAGS “/MP" ) #Yes #Don’t set means No |
||
| Use Unicode For Assembler Listing | set_target_properties( target PROPERTIES COMPILE_FLAGS “/FAu" ) #yes #Don’t set means no |
||
| Optimization | Optimization | set(CMAKE_C_FLAGS_DEBUG_INIT "/D_DEBUG /MTd /Zi /Ob0 /Od /RTC1") set(CMAKE_C_FLAGS_MINSIZEREL_INIT "/MT /O1 /Ob1 /D NDEBUG") set(CMAKE_C_FLAGS_RELEASE_INIT "/MT /O2 /Ob2 /D NDEBUG") set(CMAKE_C_FLAGS_RELWITHDEBINFO_INIT "/MT /Zi /O2 /Ob1 /D NDEBUG") Change the default flags for specific config. |
|
| Inline Function Expansion | set(CMAKE_C_FLAGS_DEBUG_INIT "/D_DEBUG /MTd /Zi /Ob0 /Od /RTC1") set(CMAKE_C_FLAGS_MINSIZEREL_INIT "/MT /O1 /Ob1 /D NDEBUG") set(CMAKE_C_FLAGS_RELEASE_INIT "/MT /O2 /Ob2 /D NDEBUG") set(CMAKE_C_FLAGS_RELWITHDEBINFO_INIT "/MT /Zi /O2 /Ob1 /D NDEBUG") Change the default flags for specific config. |
||
| Enable Intrinsic Functions | set_target_properties( target PROPERTIES COMPILE_FLAGS “/Oi" ) #yes #Don’t set means no |
||
| Favor Size or Speed | set_target_properties( target PROPERTIES COMPILE_FLAGS “/Os" ) #size set_target_properties( target PROPERTIES COMPILE_FLAGS “/Ot" ) #speed #Don’t set means neither |
||
| Omit Frame Pointers | set_target_properties( target PROPERTIES COMPILE_FLAGS “/Oy-" ) #no set_target_properties( target PROPERTIES COMPILE_FLAGS “/Oy" ) #yes |
||
| Enable Fiber-safe Optimizations | set_target_properties( target PROPERTIES COMPILE_FLAGS “/GT" ) #yes #not setting means no |
||
| Whole Program Optimization | set_target_properties( target PROPERTIES COMPILE_FLAGS “/GL" ) #yes #not setting means no |
||
| Preprocessor | Preprocessor Definitions | set_target_properties( target PROPERTIES COMPILE_DEFINITIONS DEFNAME=DEFVAL ) set_source_files_properties( filename.cpp PROPERTIES COMPILE_DEFINITIONS DEFNAME=DEFVAL ) |
|
| Undefine Preprocessor Definitions | set_target_properties( target PROPERTIES COMPILE_FLAGS “/UDEFNAME" ) | ||
| Undefine All Preprocessor Definitions | set_target_properties( target PROPERTIES COMPILE_FLAGS “/u" ) | ||
| Ignore Standard Include Path | set_target_properties( target PROPERTIES COMPILE_FLAGS “/X" ) | ||
| Preprocess to a File | set_target_properties( target PROPERTIES COMPILE_FLAGS “/P" ) | ||
| Preprocess Suppress Line Numbers | set_target_properties( target PROPERTIES COMPILE_FLAGS “/EP" ) | ||
| Keep Comments | set_target_properties( target PROPERTIES COMPILE_FLAGS “/C" ) | ||
| Code Generation | Enable String Pooling | set_target_properties( target PROPERTIES COMPILE_FLAGS “/GF" ) #yes set_target_properties( target PROPERTIES COMPILE_FLAGS “/GF-" ) #no |
|
| Enable Minimum Rebuild | set_target_properties( target PROPERTIES COMPILE_FLAGS “/Gm" ) #yes set_target_properties( target PROPERTIES COMPILE_FLAGS “/Gm-" )#no |
||
| Enable C++ Exceptions | set_target_properties( target PROPERTIES COMPILE_FLAGS “/EHsc" ) #yes set_target_properties( target PROPERTIES COMPILE_FLAGS “/EHa" ) #yes, with SEH exceptions set_target_properties( target PROPERTIES COMPILE_FLAGS “/EHs" ) #yes, with extern C functions #not setting means no |
||
| Smaller Type Check | set_target_properties( target PROPERTIES COMPILE_FLAGS “/RTCc" ) #yes #not setting means no |
||
| Basic Runtime Checks | set_target_properties( target PROPERTIES COMPILE_FLAGS “/RTCs" ) #Stack frame check set_target_properties( target PROPERTIES COMPILE_FLAGS “/RTCu" ) #Uninitialized Variable set_target_properties( target PROPERTIES COMPILE_FLAGS “/TRC1" ) #Both #not setting means no |
||
| Runtime Library | CMAKE FAQ set(CMAKE_C_FLAGS_DEBUG_INIT "/D_DEBUG /MTd /Zi /Ob0 /Od /RTC1") set(CMAKE_C_FLAGS_MINSIZEREL_INIT "/MT /O1 /Ob1 /D NDEBUG") set(CMAKE_C_FLAGS_RELEASE_INIT "/MT /O2 /Ob2 /D NDEBUG") set(CMAKE_C_FLAGS_RELWITHDEBINFO_INIT "/MT /Zi /O2 /Ob1 /D NDEBUG") Change the default flags for specific config. |
||
| Struct Member Alignment | set_target_properties( target PROPERTIES COMPILE_FLAGS “/Zp1" ) set_target_properties( target PROPERTIES COMPILE_FLAGS “/Zp2" ) set_target_properties( target PROPERTIES COMPILE_FLAGS “/Zp4" ) set_target_properties( target PROPERTIES COMPILE_FLAGS “/Zp8" )set_target_properties( target PROPERTIES COMPILE_FLAGS “/Zp16" ) |
||
| Buffer Security Check | set_target_properties( target PROPERTIES COMPILE_FLAGS “/GS" ) #yes set_target_properties( target PROPERTIES COMPILE_FLAGS “/GS-" ) #no |
||
| Enable Function-Level Linking | set_target_properties( target PROPERTIES COMPILE_FLAGS “/Gy" ) #yes set_target_properties( target PROPERTIES COMPILE_FLAGS “/Gy-" ) #no |
||
| Enable Enhaunced Instruction Set | set_target_properties( target PROPERTIES COMPILE_FLAGS “/arch:SSE" ) set_target_properties( target PROPERTIES COMPILE_FLAGS “/arch:SSE2" ) |
||
| Floating Point Model | set_target_properties( target PROPERTIES COMPILE_FLAGS “/fp:precise" ) set_target_properties( target PROPERTIES COMPILE_FLAGS “/fp:strict" ) set_target_properties( target PROPERTIES COMPILE_FLAGS “/fp:fast" ) |
||
| Enable Floating Point Exceptions | set_target_properties( target PROPERTIES COMPILE_FLAGS “/fp:except" ) | ||
| Create Hotpatchable Image | set_target_properties( target PROPERTIES COMPILE_FLAGS “/hotpatch" ) | ||
| Language | Disable Language Extensions | set_target_properties( target PROPERTIES COMPILE_FLAGS “/Za" ) | |
| Treat Wchar_t As Built in Type | set_target_properties( target PROPERTIES COMPILE_FLAGS “/Zc:wchar_t" )#yes set_target_properties( target PROPERTIES COMPILE_FLAGS “/Zc:wchar_t-" ) #no |
||
| Force Conformance in For Loop Scope | |||
| Enable Run-Time Type Information | set_target_properties( target PROPERTIES COMPILE_FLAGS “/GR" ) #yes set_target_properties( target PROPERTIES COMPILE_FLAGS “/GR-" ) #no |
||
| Open MP Support | set_target_properties( target PROPERTIES COMPILE_FLAGS “/openmp" )#yes set_target_properties( target PROPERTIES COMPILE_FLAGS “/openmp-" )#no |
||
| PreCompiled Header | PreCompiled Header | set_target_properties( target PROPERTIES COMPILE_FLAGS "/Yc" ) #create set_target_properties( target PROPERTIES COMPILE_FLAGS "/Yu" ) #use #not setting means no |
|
| PreCompiled Header File | set_target_properties( target PROPERTIES COMPILE_FLAGS "/Ycstdafx.h" ) set_target_properties( target PROPERTIES COMPILE_FLAGS "/Yustdafx.h" ) |
||
| Precompiled Header output File | set_target_properties( target PROPERTIES COMPILE_FLAGS "/FpPathAndName.pch" ) | ||
| Output Files | Expand Attributed Source | set_target_properties( target PROPERTIES COMPILE_FLAGS "/Fx" ) | |
| Assembler Output | set_target_properties( target PROPERTIES COMPILE_FLAGS "/FA" ) set_target_properties( target PROPERTIES COMPILE_FLAGS "/FAc" ) set_target_properties( target PROPERTIES COMPILE_FLAGS "/FAs" ) set_target_properties( target PROPERTIES COMPILE_FLAGS "/FAcs" ) #not setting means no list |
||
| ASM List Location | set_target_properties( target PROPERTIES COMPILE_FLAGS "/FaDebug" ) | ||
| Object File name | set_target_properties( target PROPERTIES COMPILE_FLAGS "/FoName.obj" ) | ||
| Program DataBase File Name | set_target_properties( target PROPERTIES COMPILE_FLAGS "/FdC:/Debug/good.pdb" ) | ||
| Generate XML Documentation Files | set_target_properties( target PROPERTIES COMPILE_FLAGS "/doc" ) | ||
| XML Documentation Filename | set_target_properties( target PROPERTIES COMPILE_FLAGS "/docDocument.xml" ) | ||
| Browse Information | Enable Browse Information | set_target_properties( target PROPERTIES COMPILE_FLAGS "/FR" ) | |
| Browse Information File | set_target_properties( target PROPERTIES COMPILE_FLAGS "/FRfilename" ) | ||
| Advanced | Calling Convention | set_target_properties( target PROPERTIES COMPILE_FLAGS "/Gd" ) #_cdecl set_target_properties( target PROPERTIES COMPILE_FLAGS "/Gr" ) #_fastcall set_target_properties( target PROPERTIES COMPILE_FLAGS "/Gz" ) #_stdcall |
|
| Compile As | set_target_properties( target PROPERTIES LINKER_LANGUAGE "CXX" ) #C++ set_target_properties( target PROPERTIES LINKER_LANGUAGE "C" ) #C or set_target_properties( target PROPERTIES COMPILE_FLAGS "/TP" ) #CXX set_target_properties( target PROPERTIES COMPILE_FLAGS "/TC" ) #C |
||
| Disable Specific Warnings | set_target_properties( target PROPERTIES COMPILE_FLAGS "/wd4710" ) | ||
| Forced Include File | set_target_properties( target PROPERTIES COMPILE_FLAGS "/FIinclude.h" ) | ||
| Forced #using File | set_target_properties( target PROPERTIES COMPILE_FLAGS "/FUname" ) | ||
| Show Includes | set_target_properties( target PROPERTIES COMPILE_FLAGS "/showIncludes" ) | ||
| Use full Paths | set_target_properties( target PROPERTIES COMPILE_FLAGS "/FC" ) | ||
| Omit Default Library name | set_target_properties( target PROPERTIES COMPILE_FLAGS "/ZI" ) | ||
| Internal Compiler Error Reporting | set_target_properties( target PROPERTIES COMPILE_FLAGS "/errorReport:queue" ) set_target_properties( target PROPERTIES COMPILE_FLAGS "/errorReport:none" ) set_target_properties( target PROPERTIES COMPILE_FLAGS "/errorReport:prompt" ) set_target_properties( target PROPERTIES COMPILE_FLAGS "/errorReport:send" ) |
||
| Treat Specific Warnings as Errors | Don't know | ||
| Linker | General | Output File | #normal case set_target_properties( target PROPERTIES OUTPUT_NAME "Helloworld" ) set_target_properties( target PROPERTIES PREFIX "lib" ) set_target_properties( target PROPERTIES SUFFIX "lib" ) #for debug version set_target_properties( target PROPERTIES DEBUG_OUTPUT_NAME "Helloworld" ) set_target_properties( target PROPERTIES DEBUG_PREFIX "lib" ) set_target_properties( target PROPERTIES DEBUG_SUFFIX "lib" ) #For dlls set_target_properties( target PROPERTIES OUTPUT_NAME "Helloworld" ) set_target_properties( target PROPERTIES IMPORT_PREFIX "lib" ) set_target_properties( target PROPERTIES IMPORT_SUFFIX "lib" ) set_target_properties( target PROPERTIES PREFIX "bin" ) set_target_properties( target PROPERTIES SUFFIX "dll" ) #output path |
| Show Progress | set_target_properties( target PROPERTIES LINK_FLAGS "/VERBOSE" ) set_target_properties( target PROPERTIES LINK_FLAGS "/VERBOSE:Lib" ) set_target_properties( target PROPERTIES LINK_FLAGS "/VERBOSE:ICF" ) set_target_properties( target PROPERTIES LINK_FLAGS "/VERBOSE:REF" ) set_target_properties( target PROPERTIES LINK_FLAGS "/VERBOSE:SAFESEH" ) set_target_properties( target PROPERTIES LINK_FLAGS "/VERBOSE:CLR" ) #not setting means no |
||
| Version | set_target_properties( target PROPERTIES VERSION 0.1.2.3) | ||
| Enable Incremental Linking | set_target_properties( target PROPERTIES LINK_FLAGS "/INCREMENTAL" ) set_target_properties( target PROPERTIES LINK_FLAGS "/INCREMENTAL:NO" ) set( CMAKE_EXE_LINKER_FLAGS_DEBUG "/INCREMENTAL" ) set( CMAKE_EXE_LINKER_FLAGS_DEBUG "/INCREMENTAL:NO" ) |
||
| Suppress Startup Banner | set_target_properties( target PROPERTIES LINK_FLAGS "/NOLOGO" ) | ||
| Ignore Import Library | Don't know | ||
| Register Output | Don't know | ||
| Per-user Redirection | Don't know | ||
| Additional Library Directories | link_directories( dir1 dir2 ) set_target_properties( target PROPERTIES LINK_FLAGS "/LIBPATH:dir1 /LIBPATH:dir2" ) |
||
| Link Library Dependencies | Don't know | ||
| Use Library Dependency Inputs | Don't know | ||
| Link Status | set_target_properties( target PROPERTIES LINK_FLAGS "/LTCG:STATUS" ) set_target_properties( target PROPERTIES LINK_FLAGS "/LTCG:NOSTATUS" ) |
||
| Prevent DLL Binding | set_target_properties( target PROPERTIES LINK_FLAGS "/ALLOWBIND:NO" ) set_target_properties( target PROPERTIES LINK_FLAGS "/ALLOWBIND:YES" ) |
||
| Treat Linker Warnings As Errors | set_target_properties( target PROPERTIES LINK_FLAGS "/WX" ) | ||
| Force File Output | set_target_properties( target PROPERTIES LINK_FLAGS "/FORCE" ) | ||
| Create Hot Patchable Image | set_target_properties( target PROPERTIES LINK_FLAGS "/FUNCTIONPADMIN" ) set_target_properties( target PROPERTIES LINK_FLAGS "/FUNCTIONPADMIN:16" ) #Itanium only set_target_properties( target PROPERTIES LINK_FLAGS "/FUNCTIONPADMIN:6" ) #x64 only set_target_properties( target PROPERTIES LINK_FLAGS "/FUNCTIONPADMIN:5" ) #x86 only |
||
| Specify Section Attributes | Don't know | ||
| Input | Additional Dependancies | target_link_libraries( target item1 item2 ) | |
| Ignore All Default Libraries | set_target_properties( target PROPERTIES LINK_FLAGS "/NODEFAULTLIB" ) | ||
| Put files into folders | source_group( header FILES includeme.h ) | ||