C++ 串口调试工具源码

C++ 串口调试工具源码

如需安装运行环境或远程调试，可加QQ905733049, 或QQ2945218359由专业技术人员远程协助！

运行结果如下：

步骤:

第一步：安装VS

第二步：新建项目

第三步：导入代码文件

第四步：运行

主要代码：

//
// Created by chang on 2017-07-28.
//
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 

#include "mainwindow.h"
#include "CalculateCheckSumDialog.h"
#include "global.h"

#include "serial/SerialController.h"
#include "serial/LineSerialController.h"
#include "ConvertDataDialog.h"
#include "DataProcessDialog.h"

MainWindow::MainWindow(QWidget *parent) : QMainWindow(parent) {

    init();
    initUi();
    setAcceptWindowDrops();
    createConnect();

    readSettings();
    createActions();
    createMenu();
    createStatusBar();

    updateStatusMessage(tr("就绪！"));
}

MainWindow::~MainWindow() {
    writeSettings();
    closeReadWriter();
}

void MainWindow::init() {
    autoSendTimer = new QTimer();
}

void MainWindow::initUi() {

    setWindowTitle(tr("串口调试工具"));

    setMinimumSize(1280, 900);

    serialRadioButton = new QRadioButton(tr("串口"), this);
    tcpServerRadioButton = new QRadioButton("TCP(服务器)", this);
    tcpClientRadioButton = new QRadioButton("TCP(客户端)", this);
    bridgeRadioButton = new QRadioButton(tr("桥接"), this);
    serialBridgeRadioButton = new QRadioButton(tr("转发"), this);

    serialRadioButton->setChecked(true);

    serialRadioButton->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);
    tcpServerRadioButton->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);
    tcpClientRadioButton->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);
    bridgeRadioButton->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);

    readWriterButtonGroup = new QButtonGroup;
    readWriterButtonGroup->addButton(serialRadioButton);
    readWriterButtonGroup->addButton(tcpServerRadioButton);
    readWriterButtonGroup->addButton(tcpClientRadioButton);
    readWriterButtonGroup->addButton(bridgeRadioButton);
    readWriterButtonGroup->addButton(serialBridgeRadioButton);

    auto readWriterButtonLayout = new QGridLayout;
    readWriterButtonLayout->addWidget(serialRadioButton, 0, 0);
    readWriterButtonLayout->addWidget(bridgeRadioButton, 0, 1);
    readWriterButtonLayout->addWidget(tcpServerRadioButton, 1, 0);
    readWriterButtonLayout->addWidget(tcpClientRadioButton, 1, 1);
    readWriterButtonLayout->addWidget(serialBridgeRadioButton, 2, 0);

    auto readWriterButtonGroupBox = new QGroupBox(tr("打开模式"));
    readWriterButtonGroupBox->setLayout(readWriterButtonLayout);

    auto serialPortNameLabel = new QLabel(tr("串口"), this);

    serialPortNameComboBox = new QComboBox(this);
    serialPortNameLabel->setBuddy(serialPortNameComboBox);

    auto *serialPortBaudRateLabel = new QLabel(tr("波特率"), this);
    serialPortBaudRateComboBox = new QComboBox(this);
    serialPortBaudRateComboBox->addItems(QStringList()
                                                 << "1200"
                                                 << "2400"
                                                 << "4800"
                                                 << "9600"
                                                 << "19200"
                                                 << "38400"
                                                 << "25600"
                                                 << "57600"
                                                 << "115200"
                                                 << "256000"
    );
    serialPortBaudRateLabel->setBuddy(serialPortBaudRateComboBox);

    auto serialPortDataBitsLabel = new QLabel(tr("数据位"), this);
    serialPortDataBitsComboBox = new QComboBox(this);
    serialPortDataBitsComboBox->addItems(QStringList() << "5" << "6" << "7" << "8");
    serialPortDataBitsLabel->setBuddy(serialPortDataBitsComboBox);

    auto serialPortStopBitsLabel = new QLabel(tr("停止位"), this);
    serialPortStopBitsComboBox = new QComboBox(this);
    serialPortStopBitsLabel->setBuddy(serialPortStopBitsComboBox);
    serialPortStopBitsComboBox->addItem(tr("1"), QSerialPort::OneStop);
    serialPortStopBitsComboBox->addItem(tr("1.5"), QSerialPort::OneAndHalfStop);
    serialPortStopBitsComboBox->addItem(tr("2"), QSerialPort::TwoStop);

    auto serialPortParityLabel = new QLabel(tr("校验位"), this);
    serialPortParityComboBox = new QComboBox(this);
    serialPortParityComboBox->addItem(tr("无校验"), QSerialPort::NoParity);
    serialPortParityComboBox->addItem(tr("奇校验"), QSerialPort::OddParity);
    serialPortParityComboBox->addItem(tr("偶校验"), QSerialPort::EvenParity);
    serialPortParityComboBox->addItem(tr("空校验"), QSerialPort::SpaceParity);
    serialPortParityComboBox->addItem(tr("标志校验"), QSerialPort::MarkParity);
    serialPortParityLabel->setBuddy(serialPortParityComboBox);

    auto serialPortSettingsGridLayout = new QGridLayout;
    serialPortSettingsGridLayout->addWidget(serialPortNameLabel, 0, 0);
    serialPortSettingsGridLayout->addWidget(serialPortNameComboBox, 0, 1);
    serialPortSettingsGridLayout->addWidget(serialPortBaudRateLabel, 1, 0);
    serialPortSettingsGridLayout->addWidget(serialPortBaudRateComboBox, 1, 1);
    serialPortSettingsGridLayout->addWidget(serialPortDataBitsLabel, 2, 0);
    serialPortSettingsGridLayout->addWidget(serialPortDataBitsComboBox, 2, 1);
    serialPortSettingsGridLayout->addWidget(serialPortStopBitsLabel, 3, 0);
    serialPortSettingsGridLayout->addWidget(serialPortStopBitsComboBox, 3, 1);
    serialPortSettingsGridLayout->addWidget(serialPortParityLabel, 4, 0);
    serialPortSettingsGridLayout->addWidget(serialPortParityComboBox, 4, 1);

    auto secondSerialPortNameLabel = new QLabel(tr("串口"), this);
    QStringList secondSerialPortNameList = getSerialNameList();

    secondSerialPortNameComboBox = new QComboBox(this);
    secondSerialPortNameLabel->setBuddy(secondSerialPortNameComboBox);

    auto *secondSerialPortBaudRateLabel = new QLabel(tr("波特率"), this);
    secondSerialPortBaudRateComboBox = new QComboBox(this);
    secondSerialPortBaudRateComboBox->addItems(QStringList()
                                                       << "1200"
                                                       << "2400"
                                                       << "4800"
                                                       << "9600"
                                                       << "19200"
                                                       << "38400"
                                                       << "25600"
                                                       << "57600"
                                                       << "115200"
                                                       << "256000"
    );
    secondSerialPortBaudRateLabel->setBuddy(secondSerialPortBaudRateComboBox);

    auto secondSerialPortDataBitsLabel = new QLabel(tr("数据位"), this);
    secondSerialPortDataBitsComboBox = new QComboBox(this);
    secondSerialPortDataBitsComboBox->addItems(QStringList() << "5" << "6" << "7" << "8");
    secondSerialPortDataBitsLabel->setBuddy(secondSerialPortDataBitsComboBox);

    auto secondSerialPortStopBitsLabel = new QLabel(tr("停止位"), this);
    secondSerialPortStopBitsComboBox = new QComboBox(this);
    secondSerialPortStopBitsLabel->setBuddy(secondSerialPortStopBitsComboBox);
    secondSerialPortStopBitsComboBox->addItem(tr("1"), QSerialPort::OneStop);
    secondSerialPortStopBitsComboBox->addItem(tr("1.5"), QSerialPort::OneAndHalfStop);
    secondSerialPortStopBitsComboBox->addItem(tr("2"), QSerialPort::TwoStop);

    auto secondSerialPortParityLabel = new QLabel(tr("校验位"), this);
    secondSerialPortParityComboBox = new QComboBox(this);
    secondSerialPortParityComboBox->addItem(tr("无校验"), QSerialPort::NoParity);
    secondSerialPortParityComboBox->addItem(tr("奇校验"), QSerialPort::OddParity);
    secondSerialPortParityComboBox->addItem(tr("偶校验"), QSerialPort::EvenParity);
    secondSerialPortParityComboBox->addItem(tr("空校验"), QSerialPort::SpaceParity);
    secondSerialPortParityComboBox->addItem(tr("标志校验"), QSerialPort::MarkParity);
    secondSerialPortParityLabel->setBuddy(secondSerialPortParityComboBox);

    auto secondSerialPortSettingsGridLayout = new QGridLayout;
    secondSerialPortSettingsGridLayout->addWidget(secondSerialPortNameLabel, 0, 0);
    secondSerialPortSettingsGridLayout->addWidget(secondSerialPortNameComboBox, 0, 1);
    secondSerialPortSettingsGridLayout->addWidget(secondSerialPortBaudRateLabel, 1, 0);
    secondSerialPortSettingsGridLayout->addWidget(secondSerialPortBaudRateComboBox, 1, 1);
    secondSerialPortSettingsGridLayout->addWidget(secondSerialPortDataBitsLabel, 2, 0);
    secondSerialPortSettingsGridLayout->addWidget(secondSerialPortDataBitsComboBox, 2, 1);
    secondSerialPortSettingsGridLayout->addWidget(secondSerialPortStopBitsLabel, 3, 0);
    secondSerialPortSettingsGridLayout->addWidget(secondSerialPortStopBitsComboBox, 3, 1);
    secondSerialPortSettingsGridLayout->addWidget(secondSerialPortParityLabel, 4, 0);
    secondSerialPortSettingsGridLayout->addWidget(secondSerialPortParityComboBox, 4, 1);

    auto firstSerialSettingsWidget = new QWidget();
    firstSerialSettingsWidget->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);
    firstSerialSettingsWidget->setLayout(serialPortSettingsGridLayout);

    auto secondSerialSettingsWidget = new QWidget();
    secondSerialSettingsWidget->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);
    secondSerialSettingsWidget->setLayout(secondSerialPortSettingsGridLayout);

    auto serialTabWidget = new QTabWidget(this);
    serialTabWidget->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);
    serialTabWidget->addTab(firstSerialSettingsWidget, tr("第一串口设置"));
    serialTabWidget->addTab(secondSerialSettingsWidget, tr("第二串口设置"));

    openSerialButton = new QPushButton(tr("打开"), this);
    refreshSerialButton = new QPushButton(tr("刷新串口列表"), this);

    auto serialOpenRefreshLayout = new QHBoxLayout;
    serialOpenRefreshLayout->addWidget(openSerialButton);
    serialOpenRefreshLayout->addWidget(refreshSerialButton);

    tcpAddressLineEdit = new QLineEdit(this);
    tcpAddressLineEdit->setMaximumWidth(100);
    tcpAddressLineEdit->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Maximum);
    tcpPortLineEdit = new QLineEdit(this);
    tcpPortLineEdit->setMaximumWidth(50);
    tcpPortLineEdit->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Maximum);

    tcpClientLabel = new QLabel(this);

    auto tcpEditLayout = new QHBoxLayout;
    tcpEditLayout->addWidget(tcpAddressLineEdit);
    tcpEditLayout->addWidget(tcpPortLineEdit);
    auto tcpLayout = new QVBoxLayout;
    tcpLayout->addStretch();
    tcpLayout->addLayout(tcpEditLayout);
    tcpLayout->addWidget(tcpClientLabel);
    tcpLayout->addStretch();

    auto tcpGroupBox = new QGroupBox(tr("TCP设置"));
    tcpGroupBox->setLayout(tcpLayout);

    addLineReturnCheckBox = new QCheckBox(tr("自动换行"), this);
    displayReceiveDataAsHexCheckBox = new QCheckBox(tr("十六进制显示"), this);
    addReceiveTimestampCheckBox = new QCheckBox(tr("添加时间戳"), this);
    pauseReceiveCheckBox = new QCheckBox(tr("暂停接收"), this);
    saveReceiveDataButton = new QPushButton(tr("保存数据"), this);
    clearReceiveDataButton = new QPushButton(tr("清除显示"), this);

    auto receiveSettingLayout = new QGridLayout;
    receiveSettingLayout->addWidget(addLineReturnCheckBox, 0, 0);
    receiveSettingLayout->addWidget(displayReceiveDataAsHexCheckBox, 0, 1);
    receiveSettingLayout->addWidget(addReceiveTimestampCheckBox, 1, 0);
    receiveSettingLayout->addWidget(pauseReceiveCheckBox, 1, 1);

    receiveSettingLayout->addWidget(saveReceiveDataButton, 2, 0);
    receiveSettingLayout->addWidget(clearReceiveDataButton, 2, 1);

    auto receiveSettingGroupBox = new QGroupBox(tr("接收设置"));
    receiveSettingGroupBox->setLayout(receiveSettingLayout);

    receiveDataBrowser = new QTextBrowser(this);
    receiveDataBrowser->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Expanding);
    auto receiveDataLayout = new QVBoxLayout;
    receiveDataLayout->addWidget(receiveDataBrowser);
    auto receiveDataGroupBox = new QGroupBox(tr("数据接收显示"));
    receiveDataGroupBox->setLayout(receiveDataLayout);
    receiveDataGroupBox->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Expanding);

    displaySendDataCheckBox = new QCheckBox(tr("显示发送数据"), this);
    displaySendDataAsHexCheckBox = new QCheckBox(tr("十六进制显示"), this);

    autoSendCheckBox = new QCheckBox(tr("自动发送"), this);
    auto sendIntervalLabel = new QLabel(tr("间隔(毫秒)"), this);
    sendIntervalLineEdit = new QLineEdit(this);
    sendIntervalLineEdit->setMaximumWidth(50);
    sendIntervalLineEdit->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Maximum);
    sendIntervalLabel->setBuddy(sendIntervalLineEdit);

    auto emptyLineDelayLabel = new QLabel(tr("空行间隔(毫秒)"), this);
    emptyLineDelayLindEdit = new QLineEdit(this);
    emptyLineDelayLindEdit->setMaximumWidth(50);
    emptyLineDelayLindEdit->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Maximum);
    emptyLineDelayLabel->setBuddy(emptyLineDelayLindEdit);

    auto emptyLineDelayLayout = new QHBoxLayout;
    emptyLineDelayLayout->addWidget(emptyLineDelayLabel);
    emptyLineDelayLayout->addWidget(emptyLineDelayLindEdit);

    auto autoSendLayout = new QHBoxLayout;
    autoSendLayout->addWidget(autoSendCheckBox);
    autoSendLayout->addWidget(sendIntervalLabel);
    autoSendLayout->addWidget(sendIntervalLineEdit);

    auto autoSendSettingsLayout = new QVBoxLayout;
    autoSendSettingsLayout->addLayout(autoSendLayout);
    autoSendSettingsLayout->addLayout(emptyLineDelayLayout);
    auto autoSendGroupBox = new QGroupBox("自动发送设置");
    autoSendGroupBox->setLayout(autoSendSettingsLayout);

    loopSendCheckBox = new QCheckBox(tr("循环发送"), this);
    resetLoopSendButton = new QPushButton(tr("重置计数"), this);
    currentSendCountLineEdit = new QLineEdit(this);
    currentSendCountLineEdit->setText("0");
    currentSendCountLineEdit->setMaximumWidth(30);
    currentSendCountLineEdit->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Minimum);

    auto currentSendCountLabel = new QLabel(tr("计数"), this);
    currentSendCountLabel->setBuddy(currentSendCountLineEdit);
    auto divideLabel = new QLabel(tr("/"), this);
    totalSendCountLabel = new QLabel(tr("0"), this);

    auto loopLayout1 = new QHBoxLayout;
    loopLayout1->addWidget(loopSendCheckBox);
    loopLayout1->addWidget(resetLoopSendButton);

    auto sendCountLayout = new QHBoxLayout;
    sendCountLayout->setAlignment(Qt::AlignLeft);
    sendCountLayout->addWidget(currentSendCountLabel);
    sendCountLayout->addWidget(currentSendCountLineEdit);
    sendCountLayout->addWidget(divideLabel);
    sendCountLayout->addWidget(totalSendCountLabel);

    auto loopSendLayout = new QVBoxLayout;
    loopSendLayout->addLayout(loopLayout1);
    loopSendLayout->addLayout(sendCountLayout);
    auto loopSendGroupBox = new QGroupBox(tr("循环发送设置"), this);
    loopSendGroupBox->setLayout(loopSendLayout);

    saveSentDataButton = new QPushButton(tr("保存数据"), this);
    clearSentDataButton = new QPushButton(tr("清除显示"), this);

    auto sendSettingLayout = new QGridLayout;
    sendSettingLayout->addWidget(displaySendDataCheckBox, 0, 0);
    sendSettingLayout->addWidget(displaySendDataAsHexCheckBox, 0, 1);
    sendSettingLayout->addWidget(saveSentDataButton, 1, 0);
    sendSettingLayout->addWidget(clearSentDataButton, 1, 1);

    auto sendSettingGroupBox = new QGroupBox(tr("发送设置"));
    sendSettingGroupBox->setLayout(sendSettingLayout);

    auto lineGroupBox = new QGroupBox(tr("按行发送"));
    sendLineButton = new QPushButton(tr("发送下一行"));
    auto lineLayout = new QVBoxLayout;
    lineLayout->addWidget(sendLineButton);
    lineGroupBox->setLayout(lineLayout);

    auto processTextLayout = new QHBoxLayout;
    processTextButton = new QPushButton(tr("数据处理"), this);
    clearTextButton = new QPushButton(tr("清空"),this);
    processTextLayout->addWidget(processTextButton);
    processTextLayout->addWidget(clearTextButton);

    hexCheckBox = new QCheckBox(tr("十六进制"), this);
    sendLineReturnCheckBox = new QCheckBox(tr("自动添加换行"), this);
    sendRNLineReturnButton = new QRadioButton(tr("\\r\\n"), this);
    sendRReturnLineButton = new QRadioButton(tr("\\r"), this);
    sendNReturnLineButton = new QRadioButton(tr("\\n"), this);

    lineReturnButtonGroup = new QButtonGroup(this);
    lineReturnButtonGroup->addButton(sendRNLineReturnButton);
    lineReturnButtonGroup->addButton(sendRReturnLineButton);
    lineReturnButtonGroup->addButton(sendNReturnLineButton);

    auto lineReturnLayout = new QHBoxLayout;
    lineReturnLayout->addWidget(sendRNLineReturnButton);
    lineReturnLayout->addWidget(sendRReturnLineButton);
    lineReturnLayout->addWidget(sendNReturnLineButton);

    auto optionSendLayout = new QVBoxLayout;
    optionSendLayout->addWidget(lineGroupBox);
    optionSendLayout->addLayout(processTextLayout);
    optionSendLayout->addWidget(sendLineReturnCheckBox);
    optionSendLayout->addLayout(lineReturnLayout);
    optionSendLayout->addWidget(hexCheckBox);

    optionSendLayout->setSizeConstraint(QLayout::SetFixedSize);

    sendDataBrowser = new QTextBrowser(this);
    sendDataBrowser->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Expanding);

    auto sendDataLayout = new QVBoxLayout;
    sendDataLayout->addWidget(sendDataBrowser);
    auto sendDataGroupBox = new QGroupBox(tr("数据发送显示"));
    sendDataGroupBox->setLayout(sendDataLayout);
    sendDataGroupBox->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Expanding);

    auto dataBrowserSplitter = new QSplitter(this);
    dataBrowserSplitter->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Expanding);
    dataBrowserSplitter->addWidget(receiveDataGroupBox);
    dataBrowserSplitter->addWidget(sendDataGroupBox);

    sendTextEdit = new QTextEdit(this);
    sendTextEdit->setMinimumHeight(100);
    sendTextEdit->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Minimum);

    auto sendLayout = new QHBoxLayout;
    sendLayout->addLayout(optionSendLayout);
    sendLayout->addWidget(sendTextEdit);

    sendLayout->setSizeConstraint(QLayout::SetFixedSize);

    auto mainVBoxLayout1 = new QVBoxLayout;
    mainVBoxLayout1->setSizeConstraint(QLayout::SetFixedSize);
    mainVBoxLayout1->addWidget(readWriterButtonGroupBox);
    mainVBoxLayout1->addWidget(serialTabWidget);
    mainVBoxLayout1->addWidget(tcpGroupBox);
    mainVBoxLayout1->addLayout(serialOpenRefreshLayout);
    mainVBoxLayout1->addWidget(receiveSettingGroupBox);
    mainVBoxLayout1->addWidget(sendSettingGroupBox);
    mainVBoxLayout1->addWidget(autoSendGroupBox);
    mainVBoxLayout1->addWidget(loopSendGroupBox);
    mainVBoxLayout1->addStretch();

    auto mainVBoxLayout2 = new QVBoxLayout;
    mainVBoxLayout2->addWidget(dataBrowserSplitter);
    mainVBoxLayout2->addLayout(sendLayout);

    auto widget = new QWidget(this);

    auto mainLayout = new QHBoxLayout;

    mainLayout->addLayout(mainVBoxLayout1);
    mainLayout->addLayout(mainVBoxLayout2);

    widget->setLayout(mainLayout);
    setCentralWidget(widget);

}

void MainWindow::setAcceptWindowDrops() {
    sendTextEdit->setAcceptDrops(false);
    sendDataBrowser->setAcceptDrops(false);
    receiveDataBrowser->setAcceptDrops(false);
    setAcceptDrops(true);
}

 运行结果如下：

Python, C++, PHP语言学习参考实例连接：

C++学习参考实例：

C++实现图形界面五子棋游戏源码：

https://blog.csdn.net/alicema1111/article/details/90035420

C++实现图形界面五子棋游戏源码2：

https://blog.csdn.net/alicema1111/article/details/106479579

C++ OpenCV相片视频人脸识别统计人数：

https://blog.csdn.net/alicema1111/article/details/105833928

VS2017+PCL开发环境配置：

https://blog.csdn.net/alicema1111/article/details/106877145

VS2017+Qt+PCL点云开发环境配置：

https://blog.csdn.net/alicema1111/article/details/105433636

C++ OpenCV汽车检测障碍物与测距：

https://blog.csdn.net/alicema1111/article/details/105833449

Windows VS2017安装配置PCL点云库：

https://blog.csdn.net/alicema1111/article/details/105111110

VS+VTK+Dicom(dcm)+CT影像切片窗体界面显示源码

https://blog.csdn.net/alicema1111/article/details/106994839

Python学习参考实例：

Python相片更换背景颜色qt窗体程序：

https://blog.csdn.net/alicema1111/article/details/106919140

OpenCV汽车识别检测数量统计：

https://blog.csdn.net/alicema1111/article/details/106597260

OpenCV视频识别检测人数跟踪统计：

https://blog.csdn.net/alicema1111/article/details/106113042

OpenCV米粒检测数量统计：

https://blog.csdn.net/alicema1111/article/details/106089697

opencv人脸识别与变形哈哈镜：

https://blog.csdn.net/alicema1111/article/details/105833123

OpenCV人脸检测打卡系统：

https://blog.csdn.net/alicema1111/article/details/105315066

Python+OpenCV摄像头人脸识别：

https://blog.csdn.net/alicema1111/article/details/105107286

Python+Opencv识别视频统计人数：

https://blog.csdn.net/alicema1111/article/details/103804032

Python+OpenCV图像人脸识别人数统计：

https://blog.csdn.net/alicema1111/article/details/105378639

python人脸头发身体部位识别人数统计：

https://blog.csdn.net/alicema1111/article/details/116424942

VS+QT+VTK三维网格图像显示GUI

https://blog.csdn.net/alicema1111/article/details/117060734

PHP网页框架：

PHP Laravel框架安装与配置后台管理前台页面显示：

https://blog.csdn.net/alicema1111/article/details/106686523