android系统自带的拍摄有时候并不能满足我们所需要的功能,比如扫描,音视频开发等,此时就需要开发者自定义相机Camera,而开发过相机的同学相信应该都遇到过尺寸适配的问题,这里就讲述如何彻底解决这种适配问题
一：尺寸适配方案
在自定义相机的时候,相机的预览尺寸与实际拍摄的手机像素尺寸如果宽高比例不一致的时候就会出现图片拉伸变胖或者变瘦, 拍出来的照片或者视频与预览的效果有差异, 而android市面上的机型像素也是各种各样的,例如最常用的拍摄照片1920-1080的预览, 拍摄视频时采用1280-720(视频编码尽量不要使用过大的预览尺寸), 这种预览尺寸也是大部分手机支持, 而8.0以后大部分手机高宽比例已经远超过了1.778:1甚至大多都超过2:1, 而getSupportedPreviewSizes()中又很少有如此比例的预览尺寸,或者实际开发有限制预览尺寸的大小, 因此对于这种尺寸的适配由其重要, 对于尺寸适配有两种方案
方案1：根据预览的尺寸,将屏幕的大小根据预览比例调整界面的布局,此种方式的原理是当屏幕尺寸与预览尺寸比例不一致时,截取屏幕的部分出来与预览一致,如图黑色部分即用来显示Camera的预览
修改屏幕布局不修改预览方案
此种适配方式
缺点：界面截取一部分后多出的布局会让界面显得很丑很丑,极丑(google的camera示例代码就是这样)
方案2：根据预览的尺寸,将SurfaceView或者TextureView显示时的画布按屏幕进行比例缩放,偏移再展示到SurfaceView或者TextureView中,此种方式的原理与第1种方式相反,当屏幕尺寸与预览尺寸不一致时,截取预览部分出来与屏幕一致, 如图黑色为屏幕显示
修改预览不修改布局方案
此种适配方式
(后面会一并讲述)
结论:一款APP是决不允许出现截取多余布局这样丑的界面,所以如果要适配采集数据与预览的适配,坚决是使用第二种适配方式
二：尺寸适配实现(这里只介绍方案二,方案一比较简单)
直接上代码,CameraHelper完整代码,包含裁剪后的手动聚焦区域计算,闪光,缩放,方向感应
/**
* Created by you on 2018-03-18.
* 拍照, 视频, H264, 扫描的Camera各版本之间的兼容操作, 并支持 手动聚焦, 缩放, 闪光
* https://developer.android.google.cn/guide/topics/media/camera#metering-focus-areas,参考
*/
public final class CameraHelper implements Camera.PreviewCallback {
/**
* 是否支持相机
* @return
*/
public static boolean isSupportCamera() {
return Camera.getNumberOfCameras() > 0;
}
public static boolean isSupportFrontCamera() {
final int cameraCount = Camera.getNumberOfCameras();
Camera.CameraInfo info = new Camera.CameraInfo();
for (int i = 0; i < cameraCount; i++) {
Camera.getCameraInfo(i, info);
if (info.facing == Camera.CameraInfo.CAMERA_FACING_FRONT) {
return true;
}
}
return false;
}
/**
* camera
*/
private Camera mCamera;
//预览字节缓存
private byte[] buffer;
//预览回调,在此回调中处理数据
private Camera.PreviewCallback callback;
//预览大小
private Camera.Size preSize;
/**
* 当前相机的相关信息
*/
private Camera.CameraInfo cameraInfo;
public CameraHelper() {
cameraInfo = new Camera.CameraInfo();
}
public void setPreviewCallback(Camera.PreviewCallback callback) {
this.callback = callback;
}
public Camera.Size getPreSize() {
return preSize;
}
@Override
public void onPreviewFrame(byte[] data, Camera camera) {
if (callback != null) {
callback.onPreviewFrame(data, camera);
}
camera.addCallbackBuffer(buffer);
}
public Matrix openPicCamera(SurfaceTexture texture, int cameraId, int w, int h,
SizeFilter filter, int orientation) {
return openCamera(texture, cameraId, w, h, filter,
Camera.Parameters.FOCUS_MODE_CONTINUOUS_PICTURE, -1, -1);
}
public Matrix openVideoCamera(SurfaceTexture texture, int cameraId, int w, int h,
SizeFilter filter, int minFps, int maxFps) {
return openCamera(texture, cameraId, w, h, filter,
Camera.Parameters.FOCUS_MODE_CONTINUOUS_VIDEO, minFps, maxFps);
}
public Matrix openScanCamera(SurfaceTexture texture, int w, int h,
SizeFilter filter, int minFps, int maxFps) {
return openCamera(texture, Camera.CameraInfo.CAMERA_FACING_BACK, w, h, filter,
Camera.Parameters.FOCUS_MODE_CONTINUOUS_PICTURE, minFps, maxFps);
}
/**
*
* @param texture
* @param cameraId {@link Camera.CameraInfo#CAMERA_FACING_BACK}
* or {@link Camera.CameraInfo#CAMERA_FACING_FRONT}
* @param w
* @param h
* @param filter
* @param focusMode 聚焦模式
* @param minFps h264时的最小帧率, 不需要时可传-1
* @param maxFps h264时的最大帧率, 不需要时可传-1
* @return
*/
public Matrix openCamera(SurfaceTexture texture, int cameraId, int w, int h,
SizeFilter filter, String focusMode, int minFps, int maxFps) {
if (mCamera == null) {
mCamera = Camera.open(cameraId);
try {
mCamera.setDisplayOrientation(90);//默认竖直拍照
Camera.getCameraInfo(cameraId, cameraInfo);
Camera.Parameters parameters = mCamera.getParameters();
//设置聚焦类型
List focusModes = parameters.getSupportedFocusModes();
if (focusMode != null && focusModes.contains(focusMode)) {
parameters.setFocusMode(focusMode);
}
//设置Pic, Pre尺寸, 视频时可以忽略Pic尺寸
Camera.Size picSize = filter.findOptimalPicSize(parameters.getSupportedPictureSizes(), w, h);
if (picSize != null) {//拍摄图片时不可null
LogUtils.i("Camera Parameters picSize %d - %d", picSize.width, picSize.height);
parameters.setPictureSize(picSize.width, picSize.height);
//设置生成图片的旋转角度,只对拍摄照片时有效.,考虑到此方法对部分机型没有效果,拍照后再统一旋转
//parameters.setRotation(getCameraRotation(orientation));
parameters.setPictureFormat(ImageFormat.JPEG);
}
preSize = filter.findOptimalPreSize(parameters.getSupportedPreviewSizes(), picSize, w, h);
if (preSize == null) throw new IllegalArgumentException("There is no matching presize");
LogUtils.i("Camera Parameters preSize %d - %d", preSize.width, preSize.height);
parameters.setPreviewSize(preSize.width, preSize.height);
parameters.setPreviewFormat(ImageFormat.NV21);
//设置帧率
if (minFps > 0 && maxFps > 0) {
initPreviewFpsRange(parameters, minFps, maxFps);
}
mCamera.setParameters(parameters);
buffer = new byte[preSize.width * preSize.height * 3 / 2];
mCamera.setPreviewTexture(texture);
mCamera.startPreview();
mCamera.setPreviewCallbackWithBuffer(this);
mCamera.addCallbackBuffer(buffer);
return transformSurface(w, h, preSize.height, preSize.width);
} catch (Exception e) {
LogUtils.e(e);
closeCamera();
}
}
return null;
}
/**
* 获取当前相机设备对应的旋转角度
* @param orientation {@link OrientationHelper#getOrientation()}
* @return 0, 90, 180, 270
* @hide
*/
public int getCameraRotation(int orientation) {
if (cameraInfo.facing == Camera.CameraInfo.CAMERA_FACING_FRONT) {
return (cameraInfo.orientation - orientation + 360) % 360;
} else {
return (cameraInfo.orientation + orientation) % 360;
}
}
/**
* 支持的闪光效果, 在开启相机之后获取
* @return
*/
public List getSupportedFlashModes() {
if (mCamera != null) {
return mCamera.getParameters().getSupportedFlashModes();
}
return null;
}
/**
* 设置当前闪光效果
* @param flashMode
*/
public void setFlashMode(String flashMode) {
if (mCamera != null) {
Camera.Parameters parameters = mCamera.getParameters();
if (flashMode.equals(parameters.getFlashMode())) return;
parameters.setFlashMode(flashMode);
mCamera.setParameters(parameters);
}
}
/**
* 释放摄像头
*/
public void closeCamera() {
buffer = null;
preSize = null;
if (mCamera != null) {
mCamera.setPreviewCallback(null);
mCamera.stopPreview();
mCamera.release();
mCamera = null;
}
}
/**
* 拍摄照片
* @param callback
*/
public void takePicture(Camera.PictureCallback callback) {
if (mCamera != null) {
mCamera.takePicture(null, null, callback);
}
}
/**
* 缩放
* @param targetRatio 放大的比例
*/
public void handleZoom(float targetRatio) {
if (mCamera == null) return;
Camera.Parameters parameters = mCamera.getParameters();
if (!parameters.isZoomSupported()) return;
List zoomRatios = parameters.getZoomRatios();
if (zoomRatios == null || zoomRatios.isEmpty()) return;
int zoom = indexByBinary(zoomRatios, targetRatio * 100);
if (zoom == parameters.getZoom()) return;
parameters.setZoom(zoom);
mCamera.setParameters(parameters);
}
/**
* 手动聚焦
*/
public void handleFocus(PointF scalePointF) {
handleFocus(scalePointF, 200, 300);
}
/**
* 手动聚焦
* @param scalePointF 聚焦点坐标与聚焦点所预览的界面宽高的比例
* @param fsize 聚焦方形区域大小
* @param msize 测光方形区域大小
*/
public void handleFocus(PointF scalePointF, int fsize, int msize) {
if (mCamera == null) return;
Camera.Parameters parameters = mCamera.getParameters();
//一般使用能自动聚焦的即可
String autoFocusMode = findFocusbackMode(parameters);
if (autoFocusMode == null) return;
mCamera.cancelAutoFocus();
if (parameters.getMaxNumFocusAreas() > 0) {//聚焦区域
List focusAreas = new ArrayList<>();
//聚焦区域
Rect focusRect = calculateTapArea(scalePointF, fsize);
focusAreas.add(new Camera.Area(focusRect, 800));
parameters.setFocusAreas(focusAreas);
} else {
LogUtils.i("focus areas not supported");
}
if (parameters.getMaxNumMeteringAreas() > 0) {//测光区域
List meteringAreas = new ArrayList<>();
Rect meteringRect = calculateTapArea(scalePointF, msize);
meteringAreas.add(new Camera.Area(meteringRect, 800));
parameters.setMeteringAreas(meteringAreas);
} else {
LogUtils.i("metering areas not supported");
}
final String currentFocusMode = parameters.getFocusMode();
parameters.setFocusMode(autoFocusMode);
mCamera.setParameters(parameters);
mCamera.autoFocus((success, camera) -> {
Camera.Parameters params = camera.getParameters();
params.setFocusMode(currentFocusMode);
camera.setParameters(params);
//如果有设置自动对焦回调时不可设置为null
camera.autoFocus(null);
LogUtils.i("autoFocus..." + success);
});
}
/**
* 获取最大支持的缩放比例, 最小就为1.0f初始大小
* @return
*/
public float getMaxZoomScale() {
if (mCamera != null) {
Camera.Parameters parameters = mCamera.getParameters();
if (parameters.isZoomSupported()) {
//getZoomRatios源码The list is sorted from small to large
List zoomRatios = parameters.getZoomRatios();
if (zoomRatios != null && zoomRatios.size() == parameters.getMaxZoom() + 1) {
int minZoom = zoomRatios.get(0);
float maxZoom = zoomRatios.get(zoomRatios.size() - 1);
return maxZoom / minZoom;
}
}
}
return 1.0f;
}
/**
* 根据实际预览的尺寸来计算Surface的缩放与移动大小
* 必须把Surface显示的与实现拍摄的预览界面的比较一致, 先调整比例,再调整偏移, 这样预览的效果即不会拉伸,拍出来的效果也与实际一致
* @param sw surface的宽
* @param sh surface的高
* @param prew Camera.Size 预览宽,注意相机的旋转90
* @param preh Camera.Size 预览高,注意相机的旋转90
* @return 返回的Matrix中包含着X轴或者Y轴的缩放比例与偏移
*/
private Matrix transformSurface(int sw, int sh, int prew, int preh) {
Matrix matrix = new Matrix();
float preScale = preh / (float) prew;
float viewScale = sh / (float) sw;
if (preScale != viewScale) {//宽高比例不一样,才需要做处理
if (preScale > viewScale) {//将高宽比例较大的放到屏幕上显示, 所以需要截掉预览的一部分高, 即Y轴偏移
//按预览的宽与需要显示的宽比例调整预览的高度
float scalePreY = sw * preScale;// preHeight * (sWidth / preWidth);
//Y轴需要放大的比例
matrix.preScale(1.0f, scalePreY / sh);
float translateY = (sh - scalePreY) / 2;
matrix.postTranslate(0, translateY);
// LogUtils.i("transY %f , %f", scalePreY, translateY);
} else {//屏幕显示高宽尺寸比例较小的,即X轴偏移
float scalePreX = sh / preScale; //preWidth * (sHeight / preHeight);
//x轴需要放大的比例
matrix.preScale(scalePreX / sw, 1.0f);
float translateX = (sw - scalePreX) / 2;
matrix.postTranslate(translateX, 0);
// LogUtils.i("transX %f , %f", scalePreX, translateX);
}
}
return matrix;
}
/**
* 初始相机预览帧率, 一般相机都支持7K~30K, 可以设置15~25, 帧率过高时, 旋转裁剪低配手机编码速度容易跟不上
* @param parameters
* @param minFps 最小帧率 K
* @param maxFps 最大帧率 K
*/
private void initPreviewFpsRange(Camera.Parameters parameters, int minFps, int maxFps) {
List supportedPreviewFpsRange = parameters.getSupportedPreviewFpsRange();
if (supportedPreviewFpsRange == null || supportedPreviewFpsRange.isEmpty()) return;
int[] suitableFPSRange = null;
for (int[] fpsRange : supportedPreviewFpsRange) {
// LogUtils.i("supportPreviewFps %d - %d", fpsRange[0], fpsRange[1]);
if (fpsRange[Camera.Parameters.PREVIEW_FPS_MIN_INDEX] >= minFps
&& fpsRange[Camera.Parameters.PREVIEW_FPS_MAX_INDEX] <= maxFps) {
suitableFPSRange = fpsRange;
break;
}
}
if (suitableFPSRange != null) {
int[] currentFpsRange = new int[2];
parameters.getPreviewFpsRange(currentFpsRange);
if (Arrays.equals(currentFpsRange, suitableFPSRange)) {
return;
}
parameters.setPreviewFpsRange(suitableFPSRange[Camera.Parameters.PREVIEW_FPS_MIN_INDEX],
suitableFPSRange[Camera.Parameters.PREVIEW_FPS_MAX_INDEX]);
} else {
LogUtils.i("No suitable FPS range in %d - %d", minFps, maxFps);
}
}
/**
* 焦点区域坐标点 (-1000, -1000, 1000, 1000),根据点坐标x,y轴与实际大小w,h比例计算出该点的区域大小
* @param scalePointF 聚焦点坐标与聚焦点所预览的界面宽高的比例
* @param areaSize 聚焦方形区域大小
* @return
*/
private Rect calculateTapArea(PointF scalePointF, int areaSize) {
int centerX = (int) (scalePointF.x * 2000 - 1000);
int centerY = (int) (scalePointF.y * 2000 - 1000);
int left = clamp(centerX - areaSize / 2, -1000, 1000);
int top = clamp(centerY - areaSize / 2, -1000, 1000);
int right = clamp(left + areaSize, -1000, 1000);
int bottom = clamp(top + areaSize, -1000, 1000);
return new Rect(left, top, right, bottom);
}
/**
* x值不能超出min~max范围
*/
private int clamp(int x, int min, int max) {
if (x > max) return max;
if (x < min) return min;
return x;
}
/**
* 查找能回调出{@link Camera#autoFocus(Camera.AutoFocusCallback)}的聚焦模式
* 源码注释中指出FOCUS_MODE_AUTO 与 FOCUS_MODE_MACRO 支持, 优先使用前者
* @param parameters
* @return
*/
private String findFocusbackMode(Camera.Parameters parameters) {
List supportedFocusModes = parameters.getSupportedFocusModes();
if (supportedFocusModes != null && !supportedFocusModes.isEmpty()) {
if (supportedFocusModes.contains(Camera.Parameters.FOCUS_MODE_AUTO)) return Camera.Parameters.FOCUS_MODE_AUTO;
if (supportedFocusModes.contains(Camera.Parameters.FOCUS_MODE_MACRO)) return Camera.Parameters.FOCUS_MODE_MACRO;
}
return null;
}
/**
* 二分查找最接近的
* @param ints
* @param target
* @return
*/
private int indexByBinary(List ints, float target) {
int low = 0;
int high = ints.size() - 1;
if (ints.size() == 1) return 0;
if (target <= ints.get(low)) return low;
if (target >= ints.get(high)) return high;
int middle = 0;
float left, right;
while(low <= high) {
middle = (low + high)/2;
right = Math.abs(ints.get(middle + 1) - target);
left = Math.abs(ints.get(middle) - target);
if(right > left) {
high = middle - 1;
} else {
low = middle + 1;
}
}
right = Math.abs(ints.get(middle + 1) - target);
left = Math.abs(ints.get(middle) - target);
return right > left ? middle : middle + 1;
}
}
TextureView部分代码，只要setTransform(matrix)即可,对于SurfaceView可能没有直接提供此方法,只需要将matrix的缩放与偏移值拆分成setTranslationX(); setScaleX();或者setTranslationY(); setScaleY()即可,原理还是一样
//开启相机
private void startCamera() {
matrix = helper.openPicCamera(cv_camera.getSurfaceTexture(), cameraId,
cv_camera.getWidth(), cv_camera.getHeight(), filter, orientationHelper.getOrientation());
if (matrix != null) {
cv_camera.setTransform(matrix);// TextureView cv_camera;
}
cv_camera.setMaxScale(helper.getMaxZoomScale());
fv_flash.setFlashModes(helper.getSupportedFlashModes(), cameraId == Camera.CameraInfo.CAMERA_FACING_FRONT);
}
补充：这里的采集回调采用缓冲的方式,Camera在设置好预览尺寸后,采集的数据大小byte[]都是一样大,使用缓冲addCallbackBuffer的方式可以避免内存的反复快速创建与回收抖动,在使用MediaCodec时也应当考虑对需要处理的byte[]进行缓存处理
mCamera.setPreviewCallbackWithBuffer(this);
mCamera.addCallbackBuffer(buffer);
有一部分手机在拍照片时,parameters.setRotation()不能见效,对于这种情况其实也好处理,Camera的parameters不设置此属性, 统一在拍照生成的data[]里进行旋转即可
parameters.setPictureSize(picSize.width, picSize.height);
//设置生成图片的旋转角度,只对拍摄照片时有效.,考虑到此方法对部分机型没有效果,拍照后再统一旋转
//parameters.setRotation(getCameraRotation(orientation));
parameters.setPictureFormat(ImageFormat.JPEG);