Element Plus el-table 自定义合并行和列

原文链接：Element Plus el-table 自定义合并行和列

前言

目标效果是将表格行数据中某个属性值相同的项合并到一起，效果如下：

import type { TableColumnCtx } from 'element-plus'

const tableData = [
  { "Available": 0, "Capacity": 0, "Name": "test05", "Status": 0, "StoAlias": "test", "Type": 0, "Used": 0 },
  { "Available": 0, "Capacity": 0, "Name": "test01", "Status": 0, "StoAlias": "169.254.218", "Type": 0, "Used": 0 },
  { "Available": 0, "Capacity": 0, "Name": "tset03", "Status": 0, "StoAlias": "test", "Type": 1, "Used": 0 },
  { "Available": 0, "Capacity": 0, "Name": "test02", "Status": 0, "StoAlias": "test03", "Type": 0, "Used": 0 },
  { "Available": 0, "Capacity": 0, "Name": "test06", "Status": 0, "StoAlias": "test03", "Type": 0, "Used": 0 },
  { "Available": 0, "Capacity": 0, "Name": "test04", "Status": 0, "StoAlias": "169.254.218", "Type": 0, "Used": 0 },
  { "Available": 0, "Capacity": 0, "Name": "test07", "Status": 0, "StoAlias": "169.254.218", "Type": 1, "Used": 0 }
]

let cellList: any[] = [] // 单元格数组
let count: number = 0 // 计数

const computeCell = (tableList: any[]) => {
  cellList = []
  count = 0
  for (let i = 0; i < tableList.length; i++) {
    if (i === 0) {
      // 先设置第一项
      cellList.push(1); // 初为1，若下一项和此项相同，就往cellList数组中追加0
      count = 0; // 初始计数为0
    } else {
      if (tableList[i].StoAlias == tableList[i - 1].StoAlias) {
        cellList[count] += 1; // 增加计数
        cellList.push(0); // 相等就往cellList数组中追加0
      } else {
        cellList.push(1); // 不等就往cellList数组中追加1
        count = i; // 将索引赋值为计数
      }
    }
  }
}

const sortArray = (x: any, y: any) => {
  if (x.StoAlias < y.StoAlias) { return -1 }
  else if (x.StoAlias > y.StoAlias) { return 1 }
  else { return 0 }
}

interface SpanMethodProps {
  row: StoragePoolItem
  column: TableColumnCtx
  rowIndex: number
  columnIndex: number
}

const spanMethod = ({
  rowIndex,
  columnIndex,
}: SpanMethodProps) => {
    computeCell(tableData.sort(sortArray))
    if (columnIndex === 0) {
      const fRow = cellList[rowIndex]
      const fCol = fRow > 0 ? 1 : 0
      return {
        rowspan: fRow, // 合并的行数
        colspan: fCol // 合并的列数，为0表示不显示
      }
    }
}

sortArray()此方法根据目标属性值（StoAlias）排序了。

点击 传送门 查看更多关于【el-table 合并行或列】的信息。