华为stelnet配置,华为nqa配置

华为stelnet配置

user-interface vty 0 4
authentication-mode aaa
protocol inbound ssh

aaa 
local-user huaweissh password cipher passwd
local-user huaweissh privilege level 15
local-user huaweissh service-type ssh

ssh user huaweissh
ssh user huaweissh authentication-type password
stelnet server enable
ssh user huaweissh service-type stelnet

华为网络设备nqa配置

nqa test-instance admin ISP_change
 test-type icmp
 destination-address ipv4 8.8.8.8
 nexthop ipv4 192.168.1.1
 fail-percent 20
 frequency 15
 probe-count 2
 source-interface WAN0/0/0
 start now

你可能感兴趣的:(网络,华为,stelnet,nqa)