openwrt使用小结

1. 下载适合开发板的镜像文件并烧录

http://downloads.openwrt.org/

2. 开机并配置有线wan口和lan口

修改文件/etc/config/network`

config interface 'loopback'
    option ifname 'lo'
    option proto 'static'
    option ipaddr '127.0.0.1'
    option netmask '255.0.0.0'

config globals 'globals'
    option ula_prefix 'fd69:2549:b96a::/48'

config interface 'lan'
    option type 'bridge'
#   option ifname 'eth0'
    option proto 'static'
    option ipaddr '192.168.2.1'
    option netmask '255.255.255.0'
    option dns '8.8.8.8'
    option ip6assign '60'

config interface 'wan'
    option proto dhcp
    option ifname eth0

3. 配置无线

修改文件/etc/config/wireless

config wifi-device 'radio0'
    option type 'mac80211'
    option channel '11'
    option hwmode '11g'
    option path 'platform/soc/3f300000.mmc/mmc_host/mmc1/mmc1:0001/mmc1:0001:1'
    option htmode 'HT20'
    option disabled '0'

config wifi-iface
    option device 'radio0'
    option network 'lan'
    option mode 'ap'
    option ssid 'LEDE'
    option encryption 'psk2'
    option key '12345678'

4. 重启并连接Internet，下载luci，并安装中文包

opkg update
opkg install luci
opkg install luci-i18n-base-zh-cn

5. 连接设置的热点

登录设置的路由器ip，完成配置。