vAmanda
vAmanda

在linux虚拟机上安装docker（我的实践）

参考文章：
https://blog.csdn.net/qq_29479041/article/details/82659218

步骤：
1.安装docker

参考文章：
https://blog.csdn.net/qq_29479041/article/details/82659218

https://blog.csdn.net/qq_38345468/article/details/110128659

2.配置docker的镜像源
我是手动修改 /etc/docker/daemon.json文件，然后执行下面命令重启docker
systemctl daemon-reload

systemctl restart docker.service

systemctl status docker -l

3.因为提示前端无法访问，关了linux的防火墙

4.后来后端部署后一直启动不了，又安装了 。NET环境，后端部署由独立部署改为了框架依赖
https://www.cnblogs.com/Mamba8-24/p/16300975.html

5完成了

3、安装docker步骤：

1、检查内核版本，必须是3.10及以上
uname -r
2、安装docker
yum install docker
3、输入y确认安装
4、启动docker
[root@localhost ~]# systemctl start docker
[root@localhost ~]# docker -v
Docker version 1.12.6, build 3e8e77d/1.12.6
5、开机启动docker
[root@localhost ~]# systemctl enable docker
Created symlink from /etc/systemd/system/multi-user.target.wants/docker.service to /usr/lib/systemd/system/docker.service.
6、停止docker
systemctl stop docker
7、重启docker服务
service docker restart

uname -r
yum install docker
输入y确认安装

systemctl start docker

docker -v

systemctl enable docker

systemctl stop docker

service docker restart

Xshell 5 (Build 0964)
Copyright © 2002-2016 NetSarang Computer, Inc. All rights reserved.

Type `help’ to learn how to use Xshell prompt.
[c:~]$

Connecting to 192.168.1.123:22…
Connection established.
To escape to local shell, press ‘Ctrl+Alt+]’.

Last login: Tue Sep 5 08:49:45 2023 from 192.168.1.222
[root@localhost ~]# docker ps -a
bash: docker: command not found…
[root@localhost ~]#
[root@localhost ~]# uname -r
3.10.0-1160.el7.x86_64
[root@localhost ~]#
[root@localhost ~]# yum install docker
Loaded plugins: fastestmirror, langpacks
Determining fastest mirrors

  • base: mirrors.aliyun.com
  • extras: mirrors.aliyun.com
  • updates: mirrors.huaweicloud.com
    base | 3.6 kB 00:00:00
    extras | 2.9 kB 00:00:00
    updates | 2.9 kB 00:00:00
    (1/4): base/7/x86_64/group_gz | 153 kB 00:00:00
    (2/4): extras/7/x86_64/primary_db | 250 kB 00:00:00
    (3/4): base/7/x86_64/primary_db | 6.1 MB 00:00:01
    (4/4): updates/7/x86_64/primary_db | 22 MB 00:00:05
    Resolving Dependencies
    –> Running transaction check
    —> Package docker.x86_64 2:1.13.1-209.git7d71120.el7.centos will be installed
    –> Processing Dependency: docker-common = 2:1.13.1-209.git7d71120.el7.centos for package: 2:docker-1.13.1-209.git7d71120.el7.centos.x86_64
    –> Processing Dependency: docker-client = 2:1.13.1-209.git7d71120.el7.centos for package: 2:docker-1.13.1-209.git7d71120.el7.centos.x86_64
    –> Processing Dependency: subscription-manager-rhsm-certificates for package: 2:docker-1.13.1-209.git7d71120.el7.centos.x86_64
    –> Running transaction check
    —> Package docker-client.x86_64 2:1.13.1-209.git7d71120.el7.centos will be installed
    —> Package docker-common.x86_64 2:1.13.1-209.git7d71120.el7.centos will be installed
    –> Processing Dependency: skopeo-containers >= 1:0.1.26-2 for package: 2:docker-common-1.13.1-209.git7d71120.el7.centos.x86_64
    –> Processing Dependency: oci-umount >= 2:2.3.3-3 for package: 2:docker-common-1.13.1-209.git7d71120.el7.centos.x86_64
    –> Processing Dependency: oci-systemd-hook >= 1:0.1.4-9 for package: 2:docker-common-1.13.1-209.git7d71120.el7.centos.x86_64
    –> Processing Dependency: oci-register-machine >= 1:0-5.13 for package: 2:docker-common-1.13.1-209.git7d71120.el7.centos.x86_64
    –> Processing Dependency: container-storage-setup >= 0.9.0-1 for package: 2:docker-common-1.13.1-209.git7d71120.el7.centos.x86_64
    –> Processing Dependency: container-selinux >= 2:2.51-1 for package: 2:docker-common-1.13.1-209.git7d71120.el7.centos.x86_64
    –> Processing Dependency: atomic-registries for package: 2:docker-common-1.13.1-209.git7d71120.el7.centos.x86_64
    —> Package subscription-manager-rhsm-certificates.x86_64 0:1.24.52-2.el7.centos will be installed
    –> Running transaction check
    —> Package atomic-registries.x86_64 1:1.22.1-33.gitb507039.el7_8 will be installed
    –> Processing Dependency: python-pytoml for package: 1:atomic-registries-1.22.1-33.gitb507039.el7_8.x86_64
    —> Package container-selinux.noarch 2:2.119.2-1.911c772.el7_8 will be installed
    —> Package container-storage-setup.noarch 0:0.11.0-2.git5eaf76c.el7 will be installed
    —> Package containers-common.x86_64 1:0.1.40-11.el7_8 will be installed
    –> Processing Dependency: subscription-manager for package: 1:containers-common-0.1.40-11.el7_8.x86_64
    –> Processing Dependency: slirp4netns for package: 1:containers-common-0.1.40-11.el7_8.x86_64
    –> Processing Dependency: fuse-overlayfs for package: 1:containers-common-0.1.40-11.el7_8.x86_64
    —> Package oci-register-machine.x86_64 1:0-6.git2b44233.el7 will be installed
    —> Package oci-systemd-hook.x86_64 1:0.2.0-1.git05e6923.el7_6 will be installed
    —> Package oci-umount.x86_64 2:2.5-3.el7 will be installed
    –> Running transaction check
    —> Package fuse-overlayfs.x86_64 0:0.7.2-6.el7_8 will be installed
    –> Processing Dependency: libfuse3.so.3(FUSE_3.2)(64bit) for package: fuse-overlayfs-0.7.2-6.el7_8.x86_64
    –> Processing Dependency: libfuse3.so.3(FUSE_3.0)(64bit) for package: fuse-overlayfs-0.7.2-6.el7_8.x86_64
    –> Processing Dependency: libfuse3.so.3()(64bit) for package: fuse-overlayfs-0.7.2-6.el7_8.x86_64
    —> Package python-pytoml.noarch 0:0.1.14-1.git7dea353.el7 will be installed
    —> Package slirp4netns.x86_64 0:0.4.3-4.el7_8 will be installed
    —> Package subscription-manager.x86_64 0:1.24.52-2.el7.centos will be installed
    –> Processing Dependency: subscription-manager-rhsm = 1.24.52 for package: subscription-manager-1.24.52-2.el7.centos.x86_64
    –> Processing Dependency: python-dmidecode >= 3.12.2-2 for package: subscription-manager-1.24.52-2.el7.centos.x86_64
    –> Processing Dependency: python-syspurpose for package: subscription-manager-1.24.52-2.el7.centos.x86_64
    –> Processing Dependency: python-dateutil for package: subscription-manager-1.24.52-2.el7.centos.x86_64
    –> Running transaction check
    —> Package fuse3-libs.x86_64 0:3.6.1-4.el7 will be installed
    —> Package python-dateutil.noarch 0:1.5-7.el7 will be installed
    —> Package python-dmidecode.x86_64 0:3.12.2-4.el7 will be installed
    —> Package python-syspurpose.x86_64 0:1.24.52-2.el7.centos will be installed
    —> Package subscription-manager-rhsm.x86_64 0:1.24.52-2.el7.centos will be installed
    –> Finished Dependency Resolution

Dependencies Resolved

=============================================================================================================================================
Package Arch Version Repository Size

Installing:
docker x86_64 2:1.13.1-209.git7d71120.el7.centos extras 17 M
Installing for dependencies:
atomic-registries x86_64 1:1.22.1-33.gitb507039.el7_8 extras 36 k
container-selinux noarch 2:2.119.2-1.911c772.el7_8 extras 40 k
container-storage-setup noarch 0.11.0-2.git5eaf76c.el7 extras 35 k
containers-common x86_64 1:0.1.40-11.el7_8 extras 43 k
docker-client x86_64 2:1.13.1-209.git7d71120.el7.centos extras 3.9 M
docker-common x86_64 2:1.13.1-209.git7d71120.el7.centos extras 101 k
fuse-overlayfs x86_64 0.7.2-6.el7_8 extras 54 k
fuse3-libs x86_64 3.6.1-4.el7 extras 82 k
oci-register-machine x86_64 1:0-6.git2b44233.el7 extras 1.1 M
oci-systemd-hook x86_64 1:0.2.0-1.git05e6923.el7_6 extras 34 k
oci-umount x86_64 2:2.5-3.el7 extras 33 k
python-dateutil noarch 1.5-7.el7 base 85 k
python-dmidecode x86_64 3.12.2-4.el7 base 83 k
python-pytoml noarch 0.1.14-1.git7dea353.el7 extras 18 k
python-syspurpose x86_64 1.24.52-2.el7.centos updates 277 k
slirp4netns x86_64 0.4.3-4.el7_8 extras 81 k
subscription-manager x86_64 1.24.52-2.el7.centos updates 1.1 M
subscription-manager-rhsm x86_64 1.24.52-2.el7.centos updates 336 k
subscription-manager-rhsm-certificates x86_64 1.24.52-2.el7.centos updates 239 k

Transaction Summary

Install 1 Package (+19 Dependent packages)

Total download size: 25 M
Installed size: 86 M
Is this ok [y/d/N]: y
Downloading packages:
warning: /var/cache/yum/x86_64/7/extras/packages/atomic-registries-1.22.1-33.gitb507039.el7_8.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID f4a80eb5: NOKEY
Public key for atomic-registries-1.22.1-33.gitb507039.el7_8.x86_64.rpm is not installed
(1/20): atomic-registries-1.22.1-33.gitb507039.el7_8.x86_64.rpm | 36 kB 00:00:00
(2/20): container-selinux-2.119.2-1.911c772.el7_8.noarch.rpm | 40 kB 00:00:00
(3/20): container-storage-setup-0.11.0-2.git5eaf76c.el7.noarch.rpm | 35 kB 00:00:00
(4/20): containers-common-0.1.40-11.el7_8.x86_64.rpm | 43 kB 00:00:00
(5/20): docker-client-1.13.1-209.git7d71120.el7.centos.x86_64.rpm | 3.9 MB 00:00:00
(6/20): docker-common-1.13.1-209.git7d71120.el7.centos.x86_64.rpm | 101 kB 00:00:00
(7/20): fuse-overlayfs-0.7.2-6.el7_8.x86_64.rpm | 54 kB 00:00:00
(8/20): fuse3-libs-3.6.1-4.el7.x86_64.rpm | 82 kB 00:00:00
(9/20): docker-1.13.1-209.git7d71120.el7.centos.x86_64.rpm | 17 MB 00:00:00
(10/20): oci-systemd-hook-0.2.0-1.git05e6923.el7_6.x86_64.rpm | 34 kB 00:00:00
Public key for python-dmidecode-3.12.2-4.el7.x86_64.rpm is not installed============================- ] 12 MB/s | 22 MB 00:00:00 ETA
(11/20): python-dmidecode-3.12.2-4.el7.x86_64.rpm | 83 kB 00:00:00
(12/20): oci-register-machine-0-6.git2b44233.el7.x86_64.rpm | 1.1 MB 00:00:00
(13/20): oci-umount-2.5-3.el7.x86_64.rpm | 33 kB 00:00:00
(14/20): python-dateutil-1.5-7.el7.noarch.rpm | 85 kB 00:00:00
(15/20): python-pytoml-0.1.14-1.git7dea353.el7.noarch.rpm | 18 kB 00:00:00
(16/20): slirp4netns-0.4.3-4.el7_8.x86_64.rpm | 81 kB 00:00:00
Public key for python-syspurpose-1.24.52-2.el7.centos.x86_64.rpm is not installed
(17/20): python-syspurpose-1.24.52-2.el7.centos.x86_64.rpm | 277 kB 00:00:00
(18/20): subscription-manager-1.24.52-2.el7.centos.x86_64.rpm | 1.1 MB 00:00:00
(19/20): subscription-manager-rhsm-1.24.52-2.el7.centos.x86_64.rpm | 336 kB 00:00:00
(20/20): subscription-manager-rhsm-certificates-1.24.52-2.el7.centos.x86_64.rpm | 239 kB 00:00:00

Total 11 MB/s | 25 MB 00:00:02
Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
Importing GPG key 0xF4A80EB5:
Userid : “CentOS-7 Key (CentOS 7 Official Signing Key) [email protected]”
Fingerprint: 6341 ab27 53d7 8a78 a7c2 7bb1 24c6 a8a7 f4a8 0eb5
Package : centos-release-7-9.2009.0.el7.centos.x86_64 (@anaconda)
From : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
Is this ok [y/N]: y
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : python-dateutil-1.5-7.el7.noarch 1/20
Installing : subscription-manager-rhsm-certificates-1.24.52-2.el7.centos.x86_64 2/20
Installing : subscription-manager-rhsm-1.24.52-2.el7.centos.x86_64 3/20
Installing : python-dmidecode-3.12.2-4.el7.x86_64 4/20
Installing : python-pytoml-0.1.14-1.git7dea353.el7.noarch 5/20
Installing : 1:atomic-registries-1.22.1-33.gitb507039.el7_8.x86_64 6/20
Installing : slirp4netns-0.4.3-4.el7_8.x86_64 7/20
Installing : container-storage-setup-0.11.0-2.git5eaf76c.el7.noarch 8/20
Installing : 2:oci-umount-2.5-3.el7.x86_64 9/20
Installing : 2:container-selinux-2.119.2-1.911c772.el7_8.noarch 10/20
Installing : 1:oci-register-machine-0-6.git2b44233.el7.x86_64 11/20
Installing : 1:oci-systemd-hook-0.2.0-1.git05e6923.el7_6.x86_64 12/20
Installing : fuse3-libs-3.6.1-4.el7.x86_64 13/20
Installing : fuse-overlayfs-0.7.2-6.el7_8.x86_64 14/20
Installing : python-syspurpose-1.24.52-2.el7.centos.x86_64 15/20
Installing : subscription-manager-1.24.52-2.el7.centos.x86_64 16/20
Installing : 1:containers-common-0.1.40-11.el7_8.x86_64 17/20
Installing : 2:docker-common-1.13.1-209.git7d71120.el7.centos.x86_64 18/20
Installing : 2:docker-client-1.13.1-209.git7d71120.el7.centos.x86_64 19/20
Installing : 2:docker-1.13.1-209.git7d71120.el7.centos.x86_64 20/20
Verifying : python-syspurpose-1.24.52-2.el7.centos.x86_64 1/20
Verifying : subscription-manager-rhsm-certificates-1.24.52-2.el7.centos.x86_64 2/20
Verifying : fuse3-libs-3.6.1-4.el7.x86_64 3/20
Verifying : subscription-manager-1.24.52-2.el7.centos.x86_64 4/20
Verifying : 1:atomic-registries-1.22.1-33.gitb507039.el7_8.x86_64 5/20
Verifying : python-dateutil-1.5-7.el7.noarch 6/20
Verifying : 2:docker-common-1.13.1-209.git7d71120.el7.centos.x86_64 7/20
Verifying : 1:oci-systemd-hook-0.2.0-1.git05e6923.el7_6.x86_64 8/20
Verifying : subscription-manager-rhsm-1.24.52-2.el7.centos.x86_64 9/20
Verifying : 1:oci-register-machine-0-6.git2b44233.el7.x86_64 10/20
Verifying : 2:container-selinux-2.119.2-1.911c772.el7_8.noarch 11/20
Verifying : 2:oci-umount-2.5-3.el7.x86_64 12/20
Verifying : container-storage-setup-0.11.0-2.git5eaf76c.el7.noarch 13/20
Verifying : 2:docker-client-1.13.1-209.git7d71120.el7.centos.x86_64 14/20
Verifying : slirp4netns-0.4.3-4.el7_8.x86_64 15/20
Verifying : python-pytoml-0.1.14-1.git7dea353.el7.noarch 16/20
Verifying : 1:containers-common-0.1.40-11.el7_8.x86_64 17/20
Verifying : 2:docker-1.13.1-209.git7d71120.el7.centos.x86_64 18/20
Verifying : fuse-overlayfs-0.7.2-6.el7_8.x86_64 19/20
Verifying : python-dmidecode-3.12.2-4.el7.x86_64 20/20

Installed:
docker.x86_64 2:1.13.1-209.git7d71120.el7.centos

Dependency Installed:
atomic-registries.x86_64 1:1.22.1-33.gitb507039.el7_8 container-selinux.noarch 2:2.119.2-1.911c772.el7_8
container-storage-setup.noarch 0:0.11.0-2.git5eaf76c.el7 containers-common.x86_64 1:0.1.40-11.el7_8
docker-client.x86_64 2:1.13.1-209.git7d71120.el7.centos docker-common.x86_64 2:1.13.1-209.git7d71120.el7.centos
fuse-overlayfs.x86_64 0:0.7.2-6.el7_8 fuse3-libs.x86_64 0:3.6.1-4.el7
oci-register-machine.x86_64 1:0-6.git2b44233.el7 oci-systemd-hook.x86_64 1:0.2.0-1.git05e6923.el7_6
oci-umount.x86_64 2:2.5-3.el7 python-dateutil.noarch 0:1.5-7.el7
python-dmidecode.x86_64 0:3.12.2-4.el7 python-pytoml.noarch 0:0.1.14-1.git7dea353.el7
python-syspurpose.x86_64 0:1.24.52-2.el7.centos slirp4netns.x86_64 0:0.4.3-4.el7_8
subscription-manager.x86_64 0:1.24.52-2.el7.centos subscription-manager-rhsm.x86_64 0:1.24.52-2.el7.centos
subscription-manager-rhsm-certificates.x86_64 0:1.24.52-2.el7.centos

Complete!
[root@localhost ~]# systemctl start docker
[root@localhost ~]# docker -v
Docker version 1.13.1, build 7d71120/1.13.1
[root@localhost ~]# systemctl enable docker
Created symlink from /etc/systemd/system/multi-user.target.wants/docker.service to /usr/lib/systemd/system/docker.service.
[root@localhost ~]#
[root@localhost ~]# systemctl stop docker
[root@localhost ~]#
[root@localhost ~]# service docker restart
Redirecting to /bin/systemctl restart docker.service
[root@localhost ~]# docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
[root@localhost ~]# systemctl start docker
[root@localhost ~]# docker -v
Docker version 1.13.1, build 7d71120/1.13.1
[root@localhost ~]# systemctl enable docker
[root@localhost ~]# systemctl stop docker
[root@localhost ~]# service docker restart
Redirecting to /bin/systemctl restart docker.service
[root@localhost ~]# cd /www/EmenMonitoring/Emen-Monitoring-back-new
[root@localhost Emen-Monitoring-back-new]#
[root@localhost Emen-Monitoring-back-new]#
[root@localhost Emen-Monitoring-back-new]# docker build -t emen-monitoring-back-new:1.0 .
Sending build context to Docker daemon 199.9 MB
Step 1/10 : FROM mcr.microsoft.com/dotnet/aspnet:6.0
Trying to pull repository mcr.microsoft.com/dotnet/aspnet …
6.0: Pulling from mcr.microsoft.com/dotnet/aspnet
14726c8f7834: Pull complete
6c3981608c2b: Pull complete
a65621c96b07: Pull complete
5a9070a06ae0: Pull complete
d757ae0f0e6a: Pull complete
Digest: sha256:e855110445f4a1b48bb0d5b6de9f14cd2dd311b1daaf047bf0f3965cab3e4a25
Status: Downloaded newer image for mcr.microsoft.com/dotnet/aspnet:6.0
—> 036528001cbb
Step 2/10 : WORKDIR /app
—> ddc74cca2fba
Removing intermediate container 06841cd65cdf
Step 3/10 : EXPOSE 80
—> Running in 4f1873bc46a3
—> 538f746fe491
Removing intermediate container 4f1873bc46a3
Step 4/10 : RUN apt-get update -y
—> Running in 2f785523f4cf

Get:1 http://deb.debian.org/debian bullseye InRelease [116 kB]
Get:2 http://deb.debian.org/debian-security bullseye-security InRelease [48.4 kB]
Get:3 http://deb.debian.org/debian bullseye-updates InRelease [44.1 kB]
Get:4 http://deb.debian.org/debian bullseye/main amd64 Packages [8183 kB]
Get:5 http://deb.debian.org/debian-security bullseye-security/main amd64 Packages [245 kB]
Get:6 http://deb.debian.org/debian bullseye-updates/main amd64 Packages [17.5 kB]
Fetched 8654 kB in 37s (232 kB/s)
Reading package lists…
—> b12e4180f2b3
Removing intermediate container 2f785523f4cf
Step 5/10 : RUN apt-get install -y libgdiplus
—> Running in 5b1174f3b894

Reading package lists…
Building dependency tree…
Reading state information…
The following additional packages will be installed:
fontconfig-config fonts-dejavu-core libbrotli1 libbsd0 libcairo2 libdeflate0
libexif12 libexpat1 libfontconfig1 libfreetype6 libgif7 libglib2.0-0
libglib2.0-data libjbig0 libjpeg62-turbo libmd0 libpixman-1-0 libpng16-16
libtiff5 libwebp6 libx11-6 libx11-data libxau6 libxcb-render0 libxcb-shm0
libxcb1 libxdmcp6 libxext6 libxml2 libxrender1 sensible-utils
shared-mime-info ucf xdg-user-dirs
The following NEW packages will be installed:
fontconfig-config fonts-dejavu-core libbrotli1 libbsd0 libcairo2 libdeflate0
libexif12 libexpat1 libfontconfig1 libfreetype6 libgdiplus libgif7
libglib2.0-0 libglib2.0-data libjbig0 libjpeg62-turbo libmd0 libpixman-1-0
libpng16-16 libtiff5 libwebp6 libx11-6 libx11-data libxau6 libxcb-render0
libxcb-shm0 libxcb1 libxdmcp6 libxext6 libxml2 libxrender1 sensible-utils
shared-mime-info ucf xdg-user-dirs
0 upgraded, 35 newly installed, 0 to remove and 0 not upgraded.
Need to get 11.2 MB of archives.
After this operation, 39.7 MB of additional disk space will be used.
Get:1 http://deb.debian.org/debian bullseye/main amd64 sensible-utils all 0.0.14 [14.8 kB]
Get:2 http://deb.debian.org/debian bullseye/main amd64 ucf all 3.0043 [74.0 kB]
Get:3 http://deb.debian.org/debian bullseye/main amd64 fonts-dejavu-core all 2.37-2 [1069 kB]
Get:4 http://deb.debian.org/debian bullseye/main amd64 fontconfig-config all 2.13.1-4.2 [281 kB]
Get:5 http://deb.debian.org/debian bullseye/main amd64 libbrotli1 amd64 1.0.9-2+b2 [279 kB]
Get:6 http://deb.debian.org/debian bullseye/main amd64 libmd0 amd64 1.0.3-3 [28.0 kB]
Get:7 http://deb.debian.org/debian bullseye/main amd64 libbsd0 amd64 0.11.3-1 [108 kB]
Get:8 http://deb.debian.org/debian bullseye/main amd64 libexpat1 amd64 2.2.10-2+deb11u5 [98.2 kB]
Get:9 http://deb.debian.org/debian bullseye/main amd64 libpng16-16 amd64 1.6.37-3 [294 kB]
Get:10 http://deb.debian.org/debian bullseye/main amd64 libfreetype6 amd64 2.10.4+dfsg-1+deb11u1 [418 kB]
Get:11 http://deb.debian.org/debian bullseye/main amd64 libfontconfig1 amd64 2.13.1-4.2 [347 kB]
Get:12 http://deb.debian.org/debian bullseye/main amd64 libpixman-1-0 amd64 0.40.0-1.1~deb11u1 [543 kB]
Get:13 http://deb.debian.org/debian bullseye/main amd64 libxau6 amd64 1:1.0.9-1 [19.7 kB]
Get:14 http://deb.debian.org/debian bullseye/main amd64 libxdmcp6 amd64 1:1.1.2-3 [26.3 kB]
Get:15 http://deb.debian.org/debian bullseye/main amd64 libxcb1 amd64 1.14-3 [140 kB]
Get:16 http://deb.debian.org/debian-security bullseye-security/main amd64 libx11-data all 2:1.7.2-1+deb11u1 [311 kB]
Get:17 http://deb.debian.org/debian-security bullseye-security/main amd64 libx11-6 amd64 2:1.7.2-1+deb11u1 [772 kB]
Get:18 http://deb.debian.org/debian bullseye/main amd64 libxcb-render0 amd64 1.14-3 [111 kB]
Get:19 http://deb.debian.org/debian bullseye/main amd64 libxcb-shm0 amd64 1.14-3 [101 kB]
Get:20 http://deb.debian.org/debian bullseye/main amd64 libxext6 amd64 2:1.3.3-1.1 [52.7 kB]
Get:21 http://deb.debian.org/debian bullseye/main amd64 libxrender1 amd64 1:0.9.10-1 [33.0 kB]
Get:22 http://deb.debian.org/debian bullseye/main amd64 libcairo2 amd64 1.16.0-5 [694 kB]
Get:23 http://deb.debian.org/debian bullseye/main amd64 libdeflate0 amd64 1.7-1 [53.1 kB]
Get:24 http://deb.debian.org/debian bullseye/main amd64 libexif12 amd64 0.6.22-3 [376 kB]
Get:25 http://deb.debian.org/debian bullseye/main amd64 libgif7 amd64 5.1.9-2 [45.1 kB]
Get:26 http://deb.debian.org/debian bullseye/main amd64 libglib2.0-0 amd64 2.66.8-1 [1370 kB]
Get:27 http://deb.debian.org/debian bullseye/main amd64 libjpeg62-turbo amd64 1:2.0.6-4 [151 kB]
Get:28 http://deb.debian.org/debian bullseye/main amd64 libjbig0 amd64 2.1-3.1+b2 [31.0 kB]
Get:29 http://deb.debian.org/debian-security bullseye-security/main amd64 libwebp6 amd64 0.6.1-2.1+deb11u1 [258 kB]
Get:30 http://deb.debian.org/debian bullseye/main amd64 libtiff5 amd64 4.2.0-1+deb11u4 [290 kB]
Get:31 http://deb.debian.org/debian bullseye/main amd64 libgdiplus amd64 6.0.4+dfsg-2 [162 kB]
Get:32 http://deb.debian.org/debian bullseye/main amd64 libglib2.0-data all 2.66.8-1 [1164 kB]
Get:33 http://deb.debian.org/debian bullseye/main amd64 libxml2 amd64 2.9.10+dfsg-6.7+deb11u4 [693 kB]
Get:34 http://deb.debian.org/debian bullseye/main amd64 shared-mime-info amd64 2.0-1 [701 kB]
Get:35 http://deb.debian.org/debian bullseye/main amd64 xdg-user-dirs amd64 0.17-2 [53.8 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 11.2 MB in 4s (2594 kB/s)
Selecting previously unselected package sensible-utils.
(Reading database … 6988 files and directories currently installed.)
Preparing to unpack …/00-sensible-utils_0.0.14_all.deb …
Unpacking sensible-utils (0.0.14) …
Selecting previously unselected package ucf.
Preparing to unpack …/01-ucf_3.0043_all.deb …
Moving old data out of the way
Unpacking ucf (3.0043) …
Selecting previously unselected package fonts-dejavu-core.
Preparing to unpack …/02-fonts-dejavu-core_2.37-2_all.deb …
Unpacking fonts-dejavu-core (2.37-2) …
Selecting previously unselected package fontconfig-config.
Preparing to unpack …/03-fontconfig-config_2.13.1-4.2_all.deb …
Unpacking fontconfig-config (2.13.1-4.2) …
Selecting previously unselected package libbrotli1:amd64.
Preparing to unpack …/04-libbrotli1_1.0.9-2+b2_amd64.deb …
Unpacking libbrotli1:amd64 (1.0.9-2+b2) …
Selecting previously unselected package libmd0:amd64.
Preparing to unpack …/05-libmd0_1.0.3-3_amd64.deb …
Unpacking libmd0:amd64 (1.0.3-3) …
Selecting previously unselected package libbsd0:amd64.
Preparing to unpack …/06-libbsd0_0.11.3-1_amd64.deb …
Unpacking libbsd0:amd64 (0.11.3-1) …
Selecting previously unselected package libexpat1:amd64.
Preparing to unpack …/07-libexpat1_2.2.10-2+deb11u5_amd64.deb …
Unpacking libexpat1:amd64 (2.2.10-2+deb11u5) …
Selecting previously unselected package libpng16-16:amd64.
Preparing to unpack …/08-libpng16-16_1.6.37-3_amd64.deb …
Unpacking libpng16-16:amd64 (1.6.37-3) …
Selecting previously unselected package libfreetype6:amd64.
Preparing to unpack …/09-libfreetype6_2.10.4+dfsg-1+deb11u1_amd64.deb …
Unpacking libfreetype6:amd64 (2.10.4+dfsg-1+deb11u1) …
Selecting previously unselected package libfontconfig1:amd64.
Preparing to unpack …/10-libfontconfig1_2.13.1-4.2_amd64.deb …
Unpacking libfontconfig1:amd64 (2.13.1-4.2) …
Selecting previously unselected package libpixman-1-0:amd64.
Preparing to unpack …/11-libpixman-1-0_0.40.0-1.1~deb11u1_amd64.deb …
Unpacking libpixman-1-0:amd64 (0.40.0-1.1~deb11u1) …
Selecting previously unselected package libxau6:amd64.
Preparing to unpack …/12-libxau6_1%3a1.0.9-1_amd64.deb …
Unpacking libxau6:amd64 (1:1.0.9-1) …
Selecting previously unselected package libxdmcp6:amd64.
Preparing to unpack …/13-libxdmcp6_1%3a1.1.2-3_amd64.deb …
Unpacking libxdmcp6:amd64 (1:1.1.2-3) …
Selecting previously unselected package libxcb1:amd64.
Preparing to unpack …/14-libxcb1_1.14-3_amd64.deb …
Unpacking libxcb1:amd64 (1.14-3) …
Selecting previously unselected package libx11-data.
Preparing to unpack …/15-libx11-data_2%3a1.7.2-1+deb11u1_all.deb …
Unpacking libx11-data (2:1.7.2-1+deb11u1) …
Selecting previously unselected package libx11-6:amd64.
Preparing to unpack …/16-libx11-6_2%3a1.7.2-1+deb11u1_amd64.deb …
Unpacking libx11-6:amd64 (2:1.7.2-1+deb11u1) …
Selecting previously unselected package libxcb-render0:amd64.
Preparing to unpack …/17-libxcb-render0_1.14-3_amd64.deb …
Unpacking libxcb-render0:amd64 (1.14-3) …
Selecting previously unselected package libxcb-shm0:amd64.
Preparing to unpack …/18-libxcb-shm0_1.14-3_amd64.deb …
Unpacking libxcb-shm0:amd64 (1.14-3) …
Selecting previously unselected package libxext6:amd64.
Preparing to unpack …/19-libxext6_2%3a1.3.3-1.1_amd64.deb …
Unpacking libxext6:amd64 (2:1.3.3-1.1) …
Selecting previously unselected package libxrender1:amd64.
Preparing to unpack …/20-libxrender1_1%3a0.9.10-1_amd64.deb …
Unpacking libxrender1:amd64 (1:0.9.10-1) …
Selecting previously unselected package libcairo2:amd64.
Preparing to unpack …/21-libcairo2_1.16.0-5_amd64.deb …
Unpacking libcairo2:amd64 (1.16.0-5) …
Selecting previously unselected package libdeflate0:amd64.
Preparing to unpack …/22-libdeflate0_1.7-1_amd64.deb …
Unpacking libdeflate0:amd64 (1.7-1) …
Selecting previously unselected package libexif12:amd64.
Preparing to unpack …/23-libexif12_0.6.22-3_amd64.deb …
Unpacking libexif12:amd64 (0.6.22-3) …
Selecting previously unselected package libgif7:amd64.
Preparing to unpack …/24-libgif7_5.1.9-2_amd64.deb …
Unpacking libgif7:amd64 (5.1.9-2) …
Selecting previously unselected package libglib2.0-0:amd64.
Preparing to unpack …/25-libglib2.0-0_2.66.8-1_amd64.deb …
Unpacking libglib2.0-0:amd64 (2.66.8-1) …
Selecting previously unselected package libjpeg62-turbo:amd64.
Preparing to unpack …/26-libjpeg62-turbo_1%3a2.0.6-4_amd64.deb …
Unpacking libjpeg62-turbo:amd64 (1:2.0.6-4) …
Selecting previously unselected package libjbig0:amd64.
Preparing to unpack …/27-libjbig0_2.1-3.1+b2_amd64.deb …
Unpacking libjbig0:amd64 (2.1-3.1+b2) …
Selecting previously unselected package libwebp6:amd64.
Preparing to unpack …/28-libwebp6_0.6.1-2.1+deb11u1_amd64.deb …
Unpacking libwebp6:amd64 (0.6.1-2.1+deb11u1) …
Selecting previously unselected package libtiff5:amd64.
Preparing to unpack …/29-libtiff5_4.2.0-1+deb11u4_amd64.deb …
Unpacking libtiff5:amd64 (4.2.0-1+deb11u4) …
Selecting previously unselected package libgdiplus.
Preparing to unpack …/30-libgdiplus_6.0.4+dfsg-2_amd64.deb …
Unpacking libgdiplus (6.0.4+dfsg-2) …
Selecting previously unselected package libglib2.0-data.
Preparing to unpack …/31-libglib2.0-data_2.66.8-1_all.deb …
Unpacking libglib2.0-data (2.66.8-1) …
Selecting previously unselected package libxml2:amd64.
Preparing to unpack …/32-libxml2_2.9.10+dfsg-6.7+deb11u4_amd64.deb …
Unpacking libxml2:amd64 (2.9.10+dfsg-6.7+deb11u4) …
Selecting previously unselected package shared-mime-info.
Preparing to unpack …/33-shared-mime-info_2.0-1_amd64.deb …
Unpacking shared-mime-info (2.0-1) …
Selecting previously unselected package xdg-user-dirs.
Preparing to unpack …/34-xdg-user-dirs_0.17-2_amd64.deb …
Unpacking xdg-user-dirs (0.17-2) …
Setting up libexpat1:amd64 (2.2.10-2+deb11u5) …
Setting up libpixman-1-0:amd64 (0.40.0-1.1~deb11u1) …
Setting up libxau6:amd64 (1:1.0.9-1) …
Setting up xdg-user-dirs (0.17-2) …
Setting up libglib2.0-0:amd64 (2.66.8-1) …
No schema files found: doing nothing.
Setting up libbrotli1:amd64 (1.0.9-2+b2) …
Setting up libdeflate0:amd64 (1.7-1) …
Setting up libjbig0:amd64 (2.1-3.1+b2) …
Setting up libglib2.0-data (2.66.8-1) …
Setting up libjpeg62-turbo:amd64 (1:2.0.6-4) …
Setting up libx11-data (2:1.7.2-1+deb11u1) …
Setting up libexif12:amd64 (0.6.22-3) …
Setting up libpng16-16:amd64 (1.6.37-3) …
Setting up libwebp6:amd64 (0.6.1-2.1+deb11u1) …
Setting up fonts-dejavu-core (2.37-2) …
Setting up libgif7:amd64 (5.1.9-2) …
Setting up libmd0:amd64 (1.0.3-3) …
Setting up sensible-utils (0.0.14) …
Setting up libtiff5:amd64 (4.2.0-1+deb11u4) …
Setting up libbsd0:amd64 (0.11.3-1) …
Setting up libxml2:amd64 (2.9.10+dfsg-6.7+deb11u4) …
Setting up libxdmcp6:amd64 (1:1.1.2-3) …
Setting up libxcb1:amd64 (1.14-3) …
Setting up libxcb-render0:amd64 (1.14-3) …
Setting up libxcb-shm0:amd64 (1.14-3) …
Setting up libfreetype6:amd64 (2.10.4+dfsg-1+deb11u1) …
Setting up shared-mime-info (2.0-1) …
Setting up ucf (3.0043) …
debconf: unable to initialize frontend: Dialog
debconf: (TERM is not set, so the dialog frontend is not usable.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (Can’t locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.32.1 /usr/local/share/perl/5.32.1 /usr/lib/x86_64-linux-gnu/perl5/5.32 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl-base /usr/lib/x86_64-linux-gnu/perl/5.32 /usr/share/perl/5.32 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.)
debconf: falling back to frontend: Teletype
Setting up libx11-6:amd64 (2:1.7.2-1+deb11u1) …
Setting up libxrender1:amd64 (1:0.9.10-1) …
Setting up fontconfig-config (2.13.1-4.2) …
debconf: unable to initialize frontend: Dialog
debconf: (TERM is not set, so the dialog frontend is not usable.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (Can’t locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.32.1 /usr/local/share/perl/5.32.1 /usr/lib/x86_64-linux-gnu/perl5/5.32 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl-base /usr/lib/x86_64-linux-gnu/perl/5.32 /usr/share/perl/5.32 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.)
debconf: falling back to frontend: Teletype
Setting up libxext6:amd64 (2:1.3.3-1.1) …
Setting up libfontconfig1:amd64 (2.13.1-4.2) …
Setting up libcairo2:amd64 (1.16.0-5) …
Setting up libgdiplus (6.0.4+dfsg-2) …
Processing triggers for libc-bin (2.31-13+deb11u6) …
—> bf1f020b28e3
Removing intermediate container 5b1174f3b894
Step 6/10 : RUN apt-get clean
—> Running in 90f57a4b7758

—> fcce83b10ed9
Removing intermediate container 90f57a4b7758
Step 7/10 : RUN ln -s /usr/lib/libgdiplus.so /usr/lib/gdiplus.dll
—> Running in fd4001177d6a

—> aeafab3148e5
Removing intermediate container fd4001177d6a
Step 8/10 : EXPOSE 443
—> Running in 902c4d370b20
—> bdac698d8719
Removing intermediate container 902c4d370b20
Step 9/10 : COPY . .
—> 903e2e3995d6
Removing intermediate container 2ea680c80707
Step 10/10 : ENTRYPOINT dotnet Emen.Web.Entry.dll
—> Running in 256780560b3c
—> 8115e1fce03c
Removing intermediate container 256780560b3c
Successfully built 8115e1fce03c
[root@localhost Emen-Monitoring-back-new]# docker run --name emen-monitoring-back-new -p 6611:80 --restart=always -d emen-monitoring-back-new:1.0
9b847c23372b95210d8a0cc53b469367c0383c9722b1fc4c51159aae1132e819
[root@localhost Emen-Monitoring-back-new]# docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
9b847c23372b emen-monitoring-back-new:1.0 “dotnet Emen.Web.E…” 9 seconds ago Up 7 seconds 443/tcp, 0.0.0.0:6611->80/tcp emen-monitoring-back-new
[root@localhost Emen-Monitoring-back-new]# docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
9b847c23372b emen-monitoring-back-new:1.0 “dotnet Emen.Web.E…” 13 seconds ago Up 1 second 443/tcp, 0.0.0.0:6611->80/tcp emen-monitoring-back-new
[root@localhost Emen-Monitoring-back-new]# docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
9b847c23372b emen-monitoring-back-new:1.0 “dotnet Emen.Web.E…” 59 seconds ago Up 1 second 443/tcp, 0.0.0.0:6611->80/tcp emen-monitoring-back-new
[root@localhost Emen-Monitoring-back-new]# docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
9b847c23372b emen-monitoring-back-new:1.0 “dotnet Emen.Web.E…” 2 minutes ago Up 6 seconds 443/tcp, 0.0.0.0:6611->80/tcp emen-monitoring-back-new
[root@localhost Emen-Monitoring-back-new]# docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
9b847c23372b emen-monitoring-back-new:1.0 “dotnet Emen.Web.E…” 2 minutes ago Up 8 seconds 443/tcp, 0.0.0.0:6611->80/tcp emen-monitoring-back-new
[root@localhost Emen-Monitoring-back-new]# http://192.168.1.123:6611/
-bash: http://192.168.1.123:6611/: No such file or directory
[root@localhost Emen-Monitoring-back-new]# systemctl stop firewalld
[root@localhost Emen-Monitoring-back-new]# /www/EmenMonitoring/Emen-Monitoring-front
-bash: /www/EmenMonitoring/Emen-Monitoring-front: Is a directory
[root@localhost Emen-Monitoring-back-new]#
[root@localhost Emen-Monitoring-back-new]#
[root@localhost Emen-Monitoring-back-new]# docker build -t emen-monitoring-front:1.0 .
Sending build context to Docker daemon 199.9 MB
Step 1/10 : FROM mcr.microsoft.com/dotnet/aspnet:6.0
—> 036528001cbb
Step 2/10 : WORKDIR /app
—> Using cache
—> ddc74cca2fba
Step 3/10 : EXPOSE 80
—> Using cache
—> 538f746fe491
Step 4/10 : RUN apt-get update -y
—> Using cache
—> b12e4180f2b3
Step 5/10 : RUN apt-get install -y libgdiplus
—> Using cache
—> bf1f020b28e3
Step 6/10 : RUN apt-get clean
—> Using cache
—> fcce83b10ed9
Step 7/10 : RUN ln -s /usr/lib/libgdiplus.so /usr/lib/gdiplus.dll
—> Using cache
—> aeafab3148e5
Step 8/10 : EXPOSE 443
—> Using cache
—> bdac698d8719
Step 9/10 : COPY . .
—> Using cache
—> 903e2e3995d6
Step 10/10 : ENTRYPOINT dotnet Emen.Web.Entry.dll
—> Using cache
—> 8115e1fce03c
Successfully built 8115e1fce03c
[root@localhost Emen-Monitoring-back-new]# docker run --name emen-monitoring-front -p 8687:80 --restart=always -d emen-monitoring-front:1.0
8ae36fa1f3e57807bc43a8845e31c1052a2cbb6228209144b7383ad060d9732a
/usr/bin/docker-current: Error response from daemon: driver failed programming external connectivity on endpoint emen-monitoring-front (5755016d7b9d6fadc6f0beb44a0ee8612ae8f3aef9b2e7c0ca04c2d43ef2b5c5): (iptables failed: iptables --wait -t nat -A DOCKER -p tcp -d 0/0 --dport 8687 -j DNAT --to-destination 172.17.0.2:80 ! -i docker0: iptables: No chain/target/match by that name.
(exit status 1)).
[root@localhost Emen-Monitoring-back-new]# cd /root
[root@localhost ~]#
[root@localhost ~]# docker stop emen-monitoring-front
emen-monitoring-front
[root@localhost ~]# docker rm emen-monitoring-front
emen-monitoring-front
[root@localhost ~]# docker rmi emen-monitoring-front:1.0
Untagged: emen-monitoring-front:1.0
[root@localhost ~]# /www/EmenMonitoring/Emen-Monitoring-front
-bash: /www/EmenMonitoring/Emen-Monitoring-front: Is a directory
[root@localhost ~]# cd /www/EmenMonitoring/Emen-Monitoring-front
[root@localhost Emen-Monitoring-front]#
[root@localhost Emen-Monitoring-front]# docker build -t emen-monitoring-front:1.0 .
Sending build context to Docker daemon 159.7 MB
Step 1/5 : FROM nginx:alpine
Trying to pull repository docker.io/library/nginx …
alpine: Pulling from docker.io/library/nginx
7264a8db6415: Pulling fs layer
518c62654cf0: Downloading [=> ] 38.89 kB/1.898 MB
d8c801465ddf: Download complete
ac28ec6b1e86: Download complete
eb8fb38efa48: Download complete
e92e38a9a0eb: Download complete
58663ac43ae7: Download complete
2f545e207252: Waiting
error pulling image configuration: read tcp 192.168.1.123:45570->104.16.104.207:443: read: connection reset by peer
[root@localhost Emen-Monitoring-front]# docker run --name emen-monitoring-front -p 8687:80 --restart=always -d emen-monitoring-front:1.0
Unable to find image ‘emen-monitoring-front:1.0’ locally
Trying to pull repository docker.io/library/emen-monitoring-front …
/usr/bin/docker-current: repository docker.io/emen-monitoring-front not found: does not exist or no pull access.
See ‘/usr/bin/docker-current run --help’.
[root@localhost Emen-Monitoring-front]# docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
9b847c23372b emen-monitoring-back-new:1.0 “dotnet Emen.Web.E…” 10 minutes ago Restarting (139) 8 minutes ago emen-monitoring-back-new
[root@localhost Emen-Monitoring-front]# docker build -t emen-monitoring-front:1.0 .
Sending build context to Docker daemon 159.7 MB
Step 1/5 : FROM nginx:alpine
Trying to pull repository docker.io/library/nginx …
alpine: Pulling from docker.io/library/nginx
7264a8db6415: Downloading [> ] 34.79 kB/3.402 MB
518c62654cf0: Pulling fs layer
d8c801465ddf: Retrying in 1 second
ac28ec6b1e86: Waiting
eb8fb38efa48: Waiting
e92e38a9a0eb: Waiting
58663ac43ae7: Waiting
2f545e207252: Waiting
error pulling image configuration: read tcp 192.168.1.123:34586->104.16.101.207:443: read: connection reset by peer
[root@localhost Emen-Monitoring-front]# docker run --name emen-monitoring-front -p 8687:80 --restart=always -d emen-monitoring-front:1.0
Unable to find image ‘emen-monitoring-front:1.0’ locally
Trying to pull repository docker.io/library/emen-monitoring-front …
/usr/bin/docker-current: repository docker.io/emen-monitoring-front not found: does not exist or no pull access.
See ‘/usr/bin/docker-current run --help’.
[root@localhost Emen-Monitoring-front]# docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
emen-monitoring-back-new 1.0 8115e1fce03c 14 minutes ago 452 MB
mcr.microsoft.com/dotnet/aspnet 6.0 036528001cbb 2 weeks ago 208 MB
[root@localhost Emen-Monitoring-front]# docker build -t emen-monitoring-front:1.0 .
Sending build context to Docker daemon 159.7 MB
Step 1/5 : FROM nginx:alpine
Trying to pull repository docker.io/library/nginx …
alpine: Pulling from docker.io/library/nginx
7264a8db6415: Pulling fs layer
518c62654cf0: Retrying in 1 second
d8c801465ddf: Download complete
ac28ec6b1e86: Download complete
eb8fb38efa48: Download complete
e92e38a9a0eb: Download complete
58663ac43ae7: Download complete
2f545e207252: Waiting
error pulling image configuration: read tcp 192.168.1.123:43796->104.16.100.207:443: read: connection timed out
[root@localhost Emen-Monitoring-front]# ^C
[root@localhost Emen-Monitoring-front]# ^C
[root@localhost Emen-Monitoring-front]# ^C
[root@localhost Emen-Monitoring-front]# cd /www/EmenMonitoring/Emen-Monitoring-front
[root@localhost Emen-Monitoring-front]#
[root@localhost Emen-Monitoring-front]#
[root@localhost Emen-Monitoring-front]# docker build -t emen-monitoring-front:1.0 .
Sending build context to Docker daemon 159.7 MB
Step 1/5 : FROM nginx:alpine
Trying to pull repository docker.io/library/nginx …
alpine: Pulling from docker.io/library/nginx
7264a8db6415: Pulling fs layer
518c62654cf0: Pulling fs layer
d8c801465ddf: Pulling fs layer
ac28ec6b1e86: Waiting
eb8fb38efa48: Waiting
e92e38a9a0eb: Waiting
58663ac43ae7: Waiting
2f545e207252: Waiting
^C
[root@localhost Emen-Monitoring-front]# docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
emen-monitoring-back-new 1.0 8115e1fce03c 34 minutes ago 452 MB
mcr.microsoft.com/dotnet/aspnet 6.0 036528001cbb 2 weeks ago 208 MB
[root@localhost Emen-Monitoring-front]# docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
9b847c23372b emen-monitoring-back-new:1.0 “dotnet Emen.Web.E…” 34 minutes ago Restarting (139) 32 minutes ago emen-monitoring-back-new
[root@localhost Emen-Monitoring-front]# cd /www/EmenMonitoring/Emen-Monitoring-front
[root@localhost Emen-Monitoring-front]#
[root@localhost Emen-Monitoring-front]#
[root@localhost Emen-Monitoring-front]# docker build -t emen-monitoring-front:1.0 .
Sending build context to Docker daemon 159.7 MB
Step 1/5 : FROM nginx:alpine
Trying to pull repository docker.io/library/nginx …
alpine: Pulling from docker.io/library/nginx
7264a8db6415: Retrying in 1 second
518c62654cf0: Pulling fs layer
d8c801465ddf: Waiting
ac28ec6b1e86: Waiting
eb8fb38efa48: Waiting
e92e38a9a0eb: Waiting
58663ac43ae7: Waiting
2f545e207252: Waiting
error pulling image configuration: Get https://production.cloudflare.docker.com/registry-v2/docker/registry/v2/blobs/sha256/43/433dbc17191a7830a9db6454bcc23414ad36caecedab39d1e51d41083ab1d629/data?verify=1693898817-taUpaE9nL437O5sz3ylv4s70yMw%3D: net/http: TLS handshake timeout
[root@localhost Emen-Monitoring-front]# docker run --name emen-monitoring-front -p 8687:80 --restart=always -d emen-monitoring-front:1.0
Unable to find image ‘emen-monitoring-front:1.0’ locally
Trying to pull repository docker.io/library/emen-monitoring-front …
/usr/bin/docker-current: repository docker.io/emen-monitoring-front not found: does not exist or no pull access.
See ‘/usr/bin/docker-current run --help’.
[root@localhost Emen-Monitoring-front]#

[root@localhost ~]# sudo mkdir -p /etc/docker
[root@localhost ~]# sudo tee /etc/docker/daemon.json <<-‘EOF’

{
“registry-mirrors”: [“http://hub-mirror.c.163.com”]
}
EOF
{
“registry-mirrors”: [“http://hub-mirror.c.163.com”]
}
[root@localhost ~]# sudo systemctl daemon-reload
[root@localhost ~]# sudo systemctl restart docker
[root@localhost ~]# docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
c40b24dc4bf5 hello-world “/hello” About a minute ago Exited (0) About a minute ago unruffled_jennings
[root@localhost ~]# cd /www/EmenMonitoring/Emen-Monitoring-back-new

sudo mkdir -p /etc/docker
sudo tee /etc/docker/daemon.json <<-‘EOF’
{
“registry-mirrors”: [“https://docker.mirrors.ustc.edu.cn”]
}
EOF
sudo systemctl daemon-reload
sudo systemctl restart docker

前端发版报错

1.镜像拉取报错Get

error pulling image configuration: Get https://production.cloudflare.docker.com/registry-v2/docker/registry/v2/blobs/sha256/43/433dbc17191a7830a9db6454bcc23414ad36caecedab39d1e51d41083ab1d629/data?verify=1693898817-taUpaE9nL437O5sz3ylv4s70yMw%3D: net/http: TLS handshake timeout

https://blog.csdn.net/SHELLCODE_8BIT/article/details/126948680
docker配置多个镜像仓库
https://blog.csdn.net/m0_51632271/article/details/126507487

2.报错信息
error pulling image configuration: read tcp 192.168.0.103:58928->104.18.123.25:443: read: connection reset by peer

这两个报错信息都是因为 镜像源不好用导致的，更好一下镜像源试试。
我部署了123/124/125 3个服务器，同一个镜像源 124就好用，123/125就不能用，换了其他镜像源就正常了。

124：
{
“registry-mirrors”: [“https://docker.mirrors.ustc.edu.cn”]
}

123：
{
“registry-mirrors”: [“http://hub-mirror.c.163.com”]
}

二、对于centos7系统

centos7使用firewall命令来开启和关闭防火墙。

1.systemctl命令

（1）systemctl status firewalld.service查看防火墙的状态；

（2）systemctl start firewalld.service启动防火墙；

（3）systemctl stop firewalld.service关闭防火墙；

（4）systemctl restart firewalld.service重启防火墙；

（5）systemctl enable firewalld.service开机启动防火墙；

（6）systemctl disable firewalld.service开机禁用防火墙；

（7）systemctl is-enabled firewalld.service查看防火墙是否开机启动；
————————————————
版权声明：本文为CSDN博主「istrangeboy」的原创文章，遵循CC 4.0 BY-SA版权协议，转载请附上原文出处链接及本声明。
原文链接：https://blog.csdn.net/istrangeboy/article/details/112747366

systemctl daemon-reload

systemctl restart docker.service

systemctl status docker -l

你可能感兴趣的:(linux,docker,运维)

  • android系统selinux中添加新属性property 辉色投像
    1.定位/android/system/sepolicy/private/property_contexts声明属性开头：persist.charge声明属性类型：u:object_r:system_prop:s0图12.定位到android/system/sepolicy/public/domain.te删除neverallow{domain-init}default_prop:property
  • Linux下QT开发的动态库界面弹出操作（SDL2） 13jjyao QT类qt开发语言sdl2linux
    需求：操作系统为linux，开发框架为qt，做成需带界面的qt动态库，调用方为java等非qt程序难点：调用方为java等非qt程序，也就是说调用方肯定不带QApplication::exec()，缺少了这个，QTimer等事件和QT创建的窗口将不能弹出(包括opencv也是不能弹出)；这与qt调用本身qt库是有本质的区别的思路：1.调用方缺QApplication::exec()，那么我们在接口
  • linux sdl windows.h,Windows下的SDL安装 奔跑吧linux内核 linuxsdlwindows.h
    首先你要下载并安装SDL开发包。如果装在C盘下，路径为C:\SDL1.2.5如果在WINDOWS下。你可以按以下步骤：1.打开VC++，点击"Tools",Options2,点击directories选项3.选择"Includefiles"增加一个新的路径。"C:\SDL1.2.5\include"4，现在选择"Libaryfiles“增加"C:\SDL1.2.5\lib"现在你可以开始编写你的第
  • linux中sdl的使用教程,sdl使用入门 Melissa Corvinus linux中sdl的使用教程
    本文通过一个简单示例讲解SDL的基本使用流程。示例中展示一个窗口，窗口里面有个随机颜色快随机移动。当我们鼠标点击关闭按钮时间窗口关闭。基本步骤如下：1.初始化SDL并创建一个窗口。SDL_Init()初始化SDL_CreateWindow()创建窗口2.纹理渲染存储RGB和存储纹理的区别：比如一个从左到右由红色渐变到蓝色的矩形，用存储RGB的话就需要把矩形中每个点的具体颜色值存储下来；而纹理只是一
  • PHP环境搭建详细教程 好看资源平台 前端php
    PHP是一个流行的服务器端脚本语言，广泛用于Web开发。为了使PHP能够在本地或服务器上运行，我们需要搭建一个合适的PHP环境。本教程将结合最新资料，介绍在不同操作系统上搭建PHP开发环境的多种方法，包括Windows、macOS和Linux系统的安装步骤，以及本地和Docker环境的配置。1.PHP环境搭建概述PHP环境的搭建主要分为以下几类：集成开发环境：例如XAMPP、WAMP、MAMP，这
  • 使用 FinalShell 进行远程连接（ssh 远程连接 Linux 服务器） 编程经验分享 开发工具服务器sshlinux
    目录前言基本使用教程新建远程连接连接主机自定义命令路由追踪前言后端开发，必然需要和服务器打交道，部署应用，排查问题，查看运行日志等等。一般服务器都是集中部署在机房中，也有一些直接是云服务器，总而言之，程序员不可能直接和服务器直接操作，一般都是通过ssh连接来登录服务器。刚接触远程连接时，使用的是XSHELL来远程连接服务器，连接上就能够操作远程服务器了，但是仅用XSHELL并没有上传下载文件的功能
  • libyuv之linux编译 jaronho Linuxlinux运维服务器
    文章目录一、下载源码二、编译源码三、注意事项1、银河麒麟系统（aarch64）（1）解决armv8-a+dotprod+i8mm指令集支持问题（2）解决armv9-a+sve2指令集支持问题一、下载源码到GitHub网站下载https://github.com/lemenkov/libyuv源码，或者用直接用git克隆到本地，如：gitclonehttps://github.com/lemenko
  • ARM驱动学习之5 LEDS驱动 JT灬新一 嵌入式C底层arm开发学习单片机
    ARM驱动学习之5LEDS驱动知识点：•linuxGPIO申请函数和赋值函数–gpio_request–gpio_set_value•三星平台配置GPIO函数–s3c_gpio_cfgpin•GPIO配置输出模式的宏变量–S3C_GPIO_OUTPUT注意点：DRIVER_NAME和DEVICE_NAME匹配。实现步骤：1.加入需要的头文件：//Linux平台的gpio头文件#include//三
  • 【华为OD技术面试真题精选 - 非技术题】 -HR面，综合面_华为od hr面 一个射手座的程序媛 程序员华为od面试职场和发展
    最后的话最近很多小伙伴找我要Linux学习资料，于是我翻箱倒柜，整理了一些优质资源，涵盖视频、电子书、PPT等共享给大家！资料预览给大家整理的视频资料：给大家整理的电子书资料：如果本文对你有帮助，欢迎点赞、收藏、转发给朋友，让我有持续创作的动力！网上学习资料一大堆，但如果学到的知识不成体系，遇到问题时只是浅尝辄止，不再深入研究，那么很难做到真正的技术提升。需要这份系统化的资料的朋友，可以点击这里获
  • docker igotyback eureka云原生
    Docker容器的文件系统是隔离的，但是可以通过挂载卷（Volumes）或绑定挂载（BindMounts）将宿主机的文件系统目录映射到容器内部。要查看Docker容器的映射路径，可以使用以下方法：查看容器配置：使用dockerinspect命令可以查看容器的详细配置信息，包括挂载的卷。例如：bashdockerinspect在输出的JSON格式中，查找"Mounts"部分，这里会列出所有的挂载信息
  • 简介Shell、zsh、bash zhaosuningsn Shellzshbashshelllinuxbash
    Shell是Linux和Unix的外壳，类似衣服，负责外界与Linux和Unix内核的交互联系。例如接收终端用户及各种应用程序的命令，把接收的命令翻译成内核能理解的语言，传递给内核，并把内核处理接收的命令的结果返回给外界，即Shell是外界和内核沟通的桥梁或大门。Linux和Unix提供了多种Shell，其中有种bash，当然还有其他好多种。Mac电脑中不但有bash，还有一个zsh，预装的，据说
  • Linux MariaDB使用OpenSSL安装SSL证书 Meta39 MySQLOracleMariaDBLinuxWindowsssllinuxmariadb
    进入到证书存放目录，批量删除.pem证书警告：确保已经进入到证书存放目录find.-typef-iname\*.pem-delete查看是否安装OpenSSLopensslversion没有则安装yuminstallopensslopenssl-devel开启SSL编辑/etc/my.cnf文件（没有的话就创建，但是要注意，在/etc/my.cnf.d/server.cnf配置了datadir的，
  • 【从浅识到熟知Linux】Linux发展史 Jammingpro 从浅学到熟知Linuxlinux运维服务器
    归属专栏：从浅学到熟知Linux个人主页：Jammingpro每日努力一点点，技术变化看得见文章前言：本篇文章记录Linux发展的历史，因在介绍Linux过程中涉及的其他操作系统及人物，本文对相关内容也有所介绍。文章目录Unix发展史Linux发展史开源Linux官网企业应用情况发行版本在学习Linux前，我们可能都会问Linux从哪里来？它是如何发展的。但在介绍Linux之前，需要先介绍一下Un
  • linux 发展史 种树的猴子 内核java操作系统linux大数据
    linux发展史说明此前对linux认识模糊一知半解，近期通过学习将自己对于linux的发展总结一下方便大家日后的学习。那Linux是目前一款非常火热的开源操作系统，可是linux是什么时候出现的，又是因为什么样的原因被开发出来的呢。以下将对linux的发展历程进行详细的讲解。目录一、Linux发展背景二、UINIX的诞生三、UNIX的重要分支-BSD的诞生四、Minix的诞生五、GNU与Free
  • Linux sh命令 fengyehongWorld Linuxlinux
    目录一.基本语法二.选项2.1-c字符串中读取内容，并执行2.1.1基本用法2.1.2获取当前目录下失效的超链接2.2-x每个命令执行之前，将其打印出来2.3结合Here文档使用一.基本语法⏹Linux和Unix系统中用于执行shell脚本或运行命令的命令。sh[选项][脚本文件][参数...]⏹选项-c：从字符串中读取内容，并执行。-x：在每个命令执行之前，将其打印出来。-s：从标准流中读取内容
  • Linux vi常用命令 fengyehongWorld Linuxlinux
    参考资料viコマンド（vimコマンド）リファレンス目录一.保存系命令二.删除系命令三.移动系命令四.复制粘贴系命令一.保存系命令⏹保存并退出:wq⏹强制保存并退出:wq!⏹退出(文件未编辑):q⏹强制退出(忽略已编辑内容):q!⏹另存为:w新文件名二.删除系命令⏹删除当前行dd⏹清空整个文档gg：移动到文档顶部dG：删除到最后一行ggdG三.移动系命令⏹移动到文档顶部gg⏹移动到文档底部#方式1G
  • Linux查看服务器日志 TPBoreas 运维linux运维
    一、tail这个是我最常用的一种查看方式用法如下：tail-n10test.log查询日志尾部最后10行的日志;tail-n+10test.log查询10行之后的所有日志;tail-fn10test.log循环实时查看最后1000行记录(最常用的)一般还会配合着grep用，(实时抓包)例如:tail-fn1000test.log|grep'关键字'（动态抓包）tail-fn1000test.log
  • 06选课支付模块之基于消息队列发送支付通知消息 echo 云清 学成在线javarabbitmq消息队列支付通知学成在线
    消息队列发送支付通知消息需求分析订单服务作为通用服务，在订单支付成功后需要将支付结果异步通知给其他对接的微服务，微服务收到支付结果根据订单的类型去更新自己的业务数据技术方案使用消息队列进行异步通知需要保证消息的可靠性即生产端将消息成功通知到服务端：消息发送到交换机-->由交换机发送到队列-->消费者监听队列，收到消息进行处理，参考文章02-使用Docker安装RabbitMQ-CSDN博客生产者确
  • 笋丁网页自动回复机器人V3.0.0免授权版源码 希希分享 软希网58soho_cn源码资源笋丁网页自动回复机器人
    笋丁网页机器人一款可设置自动回复，默认消息，调用自定义api接口的网页机器人。此程序后端语言使用Golang，内存占用最高不超过30MB，1H1G服务器流畅运行。仅支持Linux服务器部署，不支持虚拟主机，请悉知！使用自定义api功能需要有一定的建站基础。源码下载：https://download.csdn.net/download/m0_66047725/89754250更多资源下载：关注我。安
  • Linux CTF逆向入门 蚁景网络安全 linux运维CTF
    1.ELF格式我们先来看看ELF文件头，如果想详细了解，可以查看ELF的manpage文档。关于ELF更详细的说明：e_shoff：节头表的文件偏移量（字节）。如果文件没有节头表，则此成员值为零。sh_offset：表示了该section（节）离开文件头部位置的距离+-------------------+|ELFheader|---++--------->+-------------------
  • NPM私库搭建-verdaccio（Linux） Beam007 npmlinux前端
    1、安装nodelinux服务器安装nodea)、官网下载所需的node版本https://nodejs.org/dist/v14.21.0/b)、解压安装包若下载的是xxx.tar.xz文件，解压命令为tar-xvfxxx.tar.xzc)、修改环境变量修改：/etc/profile文件#SETPATHFORNODEJSexportNODE_HOME=NODEJS解压安装的路径exportPAT
  • Ubuntu18.04 Docker部署Kinship(Django)项目过程 Dante617
    1Docker的安装https://blog.csdn.net/weixin_41735055/article/details/1003551792下载镜像dockerpullprogramize/python3.6.8-dlib下载的镜像里包含python3.6.8和dlib19.17.03启动镜像dockerrun-it--namekinship-p7777:80-p3307:3306-p55
  • C++常见知识掌握 nfgo c++开发语言
    1.Linux软件开发、调试与维护内核与系统结构Linux内核是操作系统的核心，负责管理硬件资源，提供系统服务，它是系统软件与硬件之间的桥梁。主要组成部分包括：进程管理：内核通过调度器分配CPU时间给各个进程，实现进程的创建、调度、终止等操作。使用进程描述符（task_struct）来存储进程信息，包括状态（就绪、运行、阻塞等）、优先级、内存映射等。内存管理：包括物理内存和虚拟内存管理。通过页表映
  • docker from指令的含义_多个FROM-含义 weixin_39722188 dockerfrom指令的含义
    小编典典什么是基本图片？一组文件，加上EXPOSE端口ENTRYPOINT和CMD。您可以添加文件并基于该基础图像构建新图像，Dockerfile并以FROM指令开头：后面提到的图像FROM是新图像的“基础图像”。这是否意味着如果我neo4j/neo4j在FROM指令中声明，则在运行映像时，neo数据库将自动运行并且可在端口7474的容器中使用？仅当您不覆盖CMD和时ENTRYPOINT。但是图像
  • Dockerfile FROM 两个 redDelta
    Docker相关视频讲解：什么是容器Docker介绍实现"DockerfileFROM两个"的步骤步骤表格步骤操作1创建一个Dockerfile文件2写入FROM指令3构建第一个镜像4创建第二个Dockerfile文件5写入FROM指令6构建第二个镜像7合并两个镜像操作步骤说明步骤1：创建一个Dockerfile文件使用任意文本编辑器创建一个名为Dockerfile的文件。登录后复制#Docker
  • linux脚本sed替换变量,sed 命令中替换值为shell变量 诺坎普之约 linux脚本sed替换变量
    文章目录sed命令中替换值为shell变量替换基本语法sed中替换使用shell变量总结参考文档sed命令中替换值为shell变量替换基本语法大家都是sed有很多用法，最多就应该是替换一些值了。让我们先回忆sed的替换语法。在sed进行替换的时候sed-i's/old/new/g'1.txtecho"hellooldfrank"|sed's/old/new/g'结果如下：hellonewfrank
  • RK3229_Android9.0_Box 4G模块EC200A调试 suifen_ 网络
    0、kernel修改这部分完全可以参考Linux的移植：RK3588EC200A-CN【4G模块】调试_rkec200a-cn-CSDN博客1、修改device/rockchip/rk322xdiff--gita/device.mkb/device.mkindexec6bfaa..e7c32d1100755---a/device.mk+++b/device.mk@@-105,6+105,8@@en
  • Dockerfile命令详解之 FROM 清风怎不知意 容器化java前端javascript
    许多同学不知道Dockerfile应该如何写，不清楚Dockerfile中的指令分别有什么意义，能达到什么样的目的，接下来我将在容器化专栏中详细的为大家解释每一个指令的含义以及用法。专栏订阅传送门https://blog.csdn.net/qq_38220908/category_11989778.html指令不区分大小写。但是，按照惯例，它们应该是大写的，以便更容易地将它们与参数区分开来。(引用
  • Dockerfile（1） - FROM 指令详解 小菠萝测试笔记 dockerpythonjavacmd大数据
    FROM指明当前的镜像基于哪个镜像构建dockerfile必须以FROM开头，除了ARG命令可以在FROM前面FROM[--platform=][AS]FROM[--platform=][:][AS]FROM[--platform=][@][AS]小栗子FROMalpine:latest一个dockerfile可以有多个FROM可以有多个FROM来创建多个镜像，或区分构建阶段，将一个构建阶段作为另
  • linux 安装Sublime Text 3 hhyiyuanyu Python学习linuxsublimetext
    方法/步骤打开官网http://www.sublimetext.com/3，选择64位进行下载执行命令wgethttps://download.sublimetext.com/sublime_text_3_build_3126_x64.tar.bz2进行下载3、下载完成进行解压,执行tar-xvvfsublime_text_3_build_3126_x64.tar.bz解压4、解压完成以后，移动到
  • 枚举的构造函数中抛出异常会怎样 bylijinnan javaenum单例
    首先从使用enum实现单例说起。 为什么要用enum来实现单例？ 这篇文章（ http://javarevisited.blogspot.sg/2012/07/why-enum-singleton-are-better-in-java.html）阐述了三个理由： 1.enum单例简单、容易，只需几行代码： public enum Singleton { INSTANCE;
  • CMake 教程 aigo C++
    转自：http://xiang.lf.blog.163.com/blog/static/127733322201481114456136/   CMake是一个跨平台的程序构建工具，比如起自己编写Makefile方便很多。 介绍：http://baike.baidu.com/view/1126160.htm 本文件不介绍CMake的基本语法，下面是篇不错的入门教程： http:
  • cvc-complex-type.2.3: Element 'beans' cannot have character Cb123456 springWebgis
      cvc-complex-type.2.3: Element 'beans' cannot have character     Line 33 in XML document from ServletContext resource [/WEB-INF/backend-servlet.xml] is i
  • jquery实例:随页面滚动条滚动而自动加载内容 120153216 jquery
    <script language="javascript"> $(function (){ var i = 4;$(window).bind("scroll", function (event){ //滚动条到网页头部的 高度，兼容ie,ff,chrome var top = document.documentElement.s
  • 将数据库中的数据转换成dbs文件 何必如此 sqldbs
    旗正规则引擎通过数据库配置器（DataBuilder）来管理数据库，无论是Oracle，还是其他主流的数据都支持，操作方式是一样的。旗正规则引擎的数据库配置器是用于编辑数据库结构信息以及管理数据库表数据，并且可以执行SQL 语句，主要功能如下。 1)数据库生成表结构信息：         主要生成数据库配置文件(.conf文
  • 在IBATIS中配置SQL语句的IN方式 357029540 ibatis
    在使用IBATIS进行SQL语句配置查询时，我们一定会遇到通过IN查询的地方，在使用IN查询时我们可以有两种方式进行配置参数：String和List。具体使用方式如下： 1.String:定义一个String的参数userIds，把这个参数传入IBATIS的sql配置文件，sql语句就可以这样写： <select id="getForms" param
  • Spring3 MVC 笔记（一） 7454103 springmvcbeanRESTJSF
             自从 MVC 这个概念提出来之后 struts1.X  struts2.X   jsf 。。。。。 这个view 层的技术一个接一个！ 都用过！不敢说哪个绝对的强悍！ 要看业务，和整体的设计！      最近公司要求开发个新系统！
  • Timer与Spring Quartz 定时执行程序 darkranger springbean工作quartz
    有时候需要定时触发某一项任务。其实在jdk1.3，java sdk就通过java.util.Timer提供相应的功能。一个简单的例子说明如何使用，很简单： 1、第一步，我们需要建立一项任务，我们的任务需要继承java.util.TimerTask package com.test; import java.text.SimpleDateFormat; import java.util.Date;
  • 大端小端转换，le32_to_cpu 和cpu_to_le32 aijuans C语言相关
    大端小端转换，le32_to_cpu 和cpu_to_le32  字节序 http://oss.org.cn/kernel-book/ldd3/ch11s04.html         小心不要假设字节序. PC 存储多字节值是低字节为先(小端为先, 因此是小端), 一些高级的平台以另一种方式(大端)
  • Nginx负载均衡配置实例详解 avords
    [导读] 负载均衡是我们大流量网站要做的一个东西，下面我来给大家介绍在Nginx服务器上进行负载均衡配置方法，希望对有需要的同学有所帮助哦。负载均衡先来简单了解一下什么是负载均衡，单从字面上的意思来理解就可以解 负载均衡是我们大流量网站要做的一个东西，下面我来给大家介绍在Nginx服务器上进行负载均衡配置方法，希望对有需要的同学有所帮助哦。 负载均衡 先来简单了解一下什么是负载均衡
  • 乱说的 houxinyou 框架敏捷开发软件测试
    从很久以前，大家就研究框架，开发方法，软件工程，好多！反正我是搞不明白！ 这两天看好多人研究敏捷模型，瀑布模型！也没太搞明白. 不过感觉和程序开发语言差不多， 瀑布就是顺序，敏捷就是循环. 瀑布就是需求、分析、设计、编码、测试一步一步走下来。而敏捷就是按摸块或者说迭代做个循环，第个循环中也一样是需求、分析、设计、编码、测试一步一步走下来。 也可以把软件开发理
  • 欣赏的价值——一个小故事 bijian1013 有效辅导欣赏欣赏的价值
    　　第一次参加家长会，幼儿园的老师说："您的儿子有多动症，在板凳上连三分钟都坐不了，你最好带他去医院看一看。"　　回家的路上，儿子问她老师都说了些什么，她鼻子一酸，差点流下泪来。因为全班30位小朋友，惟有他表现最差；惟有对他，老师表现出不屑，然而她还在告诉她的儿子："老师表扬你了，说宝宝原来在板凳上坐不了一分钟，现在能坐三分钟。其他妈妈都非常羡慕妈妈，因为全班只有宝宝
  • 包冲突问题的解决方法 bingyingao eclipsemavenexclusions包冲突
    包冲突是开发过程中很常见的问题： 其表现有： 1.明明在eclipse中能够索引到某个类，运行时却报出找不到类。 2.明明在eclipse中能够索引到某个类的方法，运行时却报出找不到方法。 3.类及方法都有，以正确编译成了.class文件，在本机跑的好好的，发到测试或者正式环境就 抛如下异常： java.lang.NoClassDefFoundError: Could not in
  • 【Spark七十五】Spark Streaming整合Flume-NG三之接入log4j bit1129 Stream
    先来一段废话： 实际工作中，业务系统的日志基本上是使用Log4j写入到日志文件中的，问题的关键之处在于业务日志的格式混乱，这给对日志文件中的日志进行统计分析带来了极大的困难，或者说，基本上无法进行分析，每个人写日志的习惯不同，导致日志行的格式五花八门，最后只能通过grep来查找特定的关键词缩小范围，但是在集群环境下，每个机器去grep一遍，分析一遍，这个效率如何可想之二，大好光阴都浪费在这上面了
  • sudoku solver in Haskell bookjovi sudokuhaskell
    这几天没太多的事做，想着用函数式语言来写点实用的程序，像fib和prime之类的就不想提了（就一行代码的事），写什么程序呢？在网上闲逛时发现sudoku游戏，sudoku十几年前就知道了，学生生涯时也想过用C/Java来实现个智能求解，但到最后往往没写成，主要是用C/Java写的话会很麻烦。   现在写程序，本人总是有一种思维惯性，总是想把程序写的更紧凑，更精致，代码行数最少，所以现
  • java apache ftpClient bro_feng java
    最近使用apache的ftpclient插件实现ftp下载，遇见几个问题，做如下总结。 1. 上传阻塞，一连串的上传，其中一个就阻塞了，或是用storeFile上传时返回false。查了点资料，说是FTP有主动模式和被动模式。将传出模式修改为被动模式ftp.enterLocalPassiveMode();然后就好了。 看了网上相关介绍，对主动模式和被动模式区别还是比较的模糊，不太了解被动模
  • 读《研磨设计模式》-代码笔记-工厂方法模式 bylijinnan java设计模式
    声明： 本文只为方便我个人查阅和理解，详细的分析以及源代码请移步 原作者的博客http://chjavach.iteye.com/ package design.pattern; /* * 工厂方法模式：使一个类的实例化延迟到子类 * 某次，我在工作不知不觉中就用到了工厂方法模式（称为模板方法模式更恰当。2012-10-29）： * 有很多不同的产品，它
  • 面试记录语 chenyu19891124 招聘
    或许真的在一个平台上成长成什么样，都必须靠自己去努力。有了好的平台让自己展示，就该好好努力。今天是自己单独一次去面试别人，感觉有点小紧张，说话有点打结。在面试完后写面试情况表，下笔真的好难，尤其是要对面试人的情况说明真的好难。 今天面试的是自己同事的同事，现在的这个同事要离职了，介绍了我现在这位同事以前的同事来面试。今天这位求职者面试的是配置管理，期初看了简历觉得应该很适合做配置管理，但是今天面
  • Fire Workflow 1.0正式版终于发布了 comsci 工作workflowGoogle
    Fire Workflow 是国内另外一款开源工作流，作者是著名的非也同志，哈哈.... 官方网站是 http://www.fireflow.org 经过大家努力,Fire Workflow 1.0正式版终于发布了 正式版主要变化: 1、增加IWorkItem.jumpToEx(...)方法，取消了当前环节和目标环节必须在同一条执行线的限制，使得自由流更加自由 2、增加IT
  • Python向脚本传参 daizj python脚本传参
    如果想对python脚本传参数，python中对应的argc, argv(c语言的命令行参数)是什么呢？ 需要模块：sys 参数个数：len(sys.argv) 脚本名：    sys.argv[0] 参数1：     sys.argv[1] 参数2：     sys.argv[
  • 管理用户分组的命令gpasswd dongwei_6688 passwd
    NAME： gpasswd - administer the /etc/group file SYNOPSIS： gpasswd group gpasswd -a user group gpasswd -d user group gpasswd -R group gpasswd -r group gpasswd [-A user,...] [-M user,...] g
  • 郝斌老师数据结构课程笔记 dcj3sjt126com 数据结构与算法
    <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
  • yii2 cgridview加上选择框进行操作 dcj3sjt126com GridView
    页面代码 <?=Html::beginForm(['controller/bulk'],'post');?> <?=Html::dropDownList('action','',[''=>'Mark selected as: ','c'=>'Confirmed','nc'=>'No Confirmed'],['class'=>'dropdown',])
  • linux mysql fypop linux
    enquiry mysql version in centos linux yum list installed | grep mysql yum -y remove mysql-libs.x86_64 enquiry mysql version in yum repositoryyum list | grep mysql oryum -y list mysql* install mysq
  • Scramble String hcx2013 String
    Given a string s1, we may represent it as a binary tree by partitioning it to two non-empty substrings recursively. Below is one possible representation of s1 = "great":
  • 跟我学Shiro目录贴 jinnianshilongnian 跟我学shiro
    历经三个月左右时间，《跟我学Shiro》系列教程已经完结，暂时没有需要补充的内容，因此生成PDF版供大家下载。最近项目比较紧，没有时间解答一些疑问，暂时无法回复一些问题，很抱歉，不过可以加群（334194438/348194195）一起讨论问题。     ----广告-----------------------------------------------------
  • nginx日志切割并使用flume-ng收集日志 liyonghui160com
         nginx的日志文件没有rotate功能。如果你不处理，日志文件将变得越来越大，还好我们可以写一个nginx日志切割脚本来自动切割日志文件。第一步就是重命名日志文件，不用担心重命名后nginx找不到日志文件而丢失日志。在你未重新打开原名字的日志文件前，nginx还是会向你重命名的文件写日志，linux是靠文件描述符而不是文件名定位文件。第二步向nginx主
  • Oracle死锁解决方法 pda158 oracle
    　select p.spid,c.object_name,b.session_id,b.oracle_username,b.os_user_name from v$process p,v$session a, v$locked_object b,all_objects c where p.addr=a.paddr and a.process=b.process and c.object_id=b.
  • java之List排序 shiguanghui list排序
       在Java Collection Framework中定义的List实现有Vector，ArrayList和LinkedList。这些集合提供了对对象组的索引访问。他们提供了元素的添加与删除支持。然而，它们并没有内置的元素排序支持。 　　你能够使用java.util.Collections类中的sort()方法对List元素进行排序。你既可以给方法传递
  • servlet单例多线程 utopialxw 单例多线程servlet
    转自http://www.cnblogs.com/yjhrem/articles/3160864.html 和   http://blog.chinaunix.net/uid-7374279-id-3687149.html Servlet 单例多线程 Servlet如何处理多个请求访问？Servlet容器默认是采用单实例多线程的方式处理多个请求的：1.当web服务器启动的
按字母分类： ABCDEFGHIJKLMNOPQRSTUVWXYZ其他