一键搭建k8s集群

输入下面脚本可一键搭建 k8s 集群

目前只适用于 centos 和 readhat，其它系统如果有需求可以留言。

bash <(curl -sL https://fastyw.com/wp-content/uploads/2022/12/k8s.sh)

k8s.sh源码：

#!/bin/bash
# Author: 有人说我白
 
RED="\033[31m"      # Error message
GREEN="\033[32m"    # Success message
YELLOW="\033[33m"   # Warning message
BLUE="\033[36m"     # Info message
PLAIN='\033[0m'
 
colorEcho() {echo -e "${1}${@:2}${PLAIN}"
}
 
checkSystem() {result=$(id | awk '{print $1}')
    if [[ $result != "uid=0(root)" ]]; then
        colorEcho $RED "请以 root 身份执行该脚本"
        exit 1
    fi
 
    res=`which yum 2>/dev/null`
    if [[ "$?" != "0" ]]; then
        res=`which apt 2>/dev/null`
        if [[ "$?" != "0" ]]; then
            colorEcho $RED "不受支持的 Linux 系统"
            exit 1
        fi
        PMT="apt"
        CMD_INSTALL="apt install -y"
        CMD_REMOVE="apt remove -y"
        CMD_UPGRADE="apt update && apt upgrade -y; apt autoremove -y"
    else
        PMT="yum"
        CMD_INSTALL="yum install -y"
        CMD_REMOVE="yum remove -y"
        CMD_UPGRADE="yum update -y"
    fi
    if [[ $PMT == "apt"   ]];then
            colorEcho $RED "不受支持的 Linux 系统"
            exit 1
    fi
    res=`which systemctl 2>/dev/null`
    if [[ "$?" != "0" ]]; then
        colorEcho $RED "系统版本过低，请升级到最新版本"
        exit 1
    fi
}
 
 
preinstall() {
    hostnamectl set-hostname $ROLE-$HOSTNAME
    #$PMT clean all
    [[ "$PMT" = "apt" ]] && $PMT update
    #echo $CMD_UPGRADE | bash
    echo ""colorEcho $BLUE" 安装必要软件 "if [["$PMT"="yum" ]]; then
        $CMD_INSTALL epel-release
    fi
    $CMD_INSTALL curl vim docker
    res=`which curl 2>/dev/null`
    [[ "$?" != "0" ]] && $CMD_INSTALL curl
    res=`which docker 2>/dev/null`
    [[ "$?" != "0" ]] && $CMD_INSTALL docker
    systemctl enable --now docker
 
    colorEcho $BLUE "配置服务器环境"
    if [[ -s /etc/selinux/config ]] && grep 'SELINUX=enforcing' /etc/selinux/config; then
        sed -i 's/SELINUX=enforcing/SELINUX=permissive/g' /etc/selinux/config
        setenforce 0
    fi
    echo 1 > /proc/sys/net/ipv4/ip_forward
    echo 1 > /proc/sys/net/bridge/bridge-nf-call-iptables
    echo 'net.ipv4.ip_forward = 1' >>  /etc/sysctl.conf
    sysctl -p
    swapoff -a
}
 
installk8s(){
cat < /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF
    colorEcho $BLUE '安装 k8s 组件'
    $CMD_INSTALL --nogpgcheck kubelet-1.23.5-0 kubeadm-1.23.5-0 kubectl-1.23.5-0
    systemctl enable --now kubelet
 
}
 
getip(){
    colorEcho $BLUE "请选择获取本机 ip/vip 的方式："
    echo "1) 网络获取"
    echo "2) 手动输入"
    read -p "请选择获取本机 ip/vip 的方式 (默认联网获取)：" answer
    if [[ -z "$answer" ]]; then
        METHOD="network"
    else
        case $answer in
        1)
            METHOD="network"
            ;;
        2)
            METHOD="matual"
            ;;
        *)
            colorEcho $RED "无效的选择，使用默认角色"
            METHOD="network"
        esac
    fi
    echo ""colorEcho $BLUE" 获取本机 ip/vip 的方式：$METHOD"if [[ $METHOD =='network' ]];then
        ip=`curl -s icanhazip.com`
    else
        read -p "请输入本机 ip/vip：" ip
    fi
    colorEcho $YELLOW "本机 ip/vip 地址为: $ip"
    read -p '确认安装请按回车键 (CTRL+ C 退出脚本)' a
}
 
 
init(){
cat <<-EOF >/root/kubeadm_init.yaml
apiVersion: kubeadm.k8s.io/v1beta3
kind: ClusterConfiguration
kubernetesVersion: v1.23.5
apiServer:
  certSANs:
  - "$ip"
controlPlaneEndpoint: "$ip:6443"
networking:
  podSubnet: 10.244.0.0/16
imageRepository: registry.cn-hangzhou.aliyuncs.com/google_containers
EOF
    kubeadm init --config=/root/kubeadm_init.yaml|tee /root/kubeinit.log
    mkdir -p $HOME/.kube
    cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
    chown $(id -u):$(id -g) $HOME/.kube/config
    kubectl apply -f https://raw.githubusercontent.com/flannel-io/flannel/master/Documentation/kube-flannel.yml
    colorEcho $GREEN 'k8s 安装完成'
}
 
greplog(){
        colorEcho $RED "关键命令，请注意保存"
        colorEcho $BLUE "如需部署集群"
        colorEcho $BLUE "请在其他 master 节点中执行下面命令"
        echo ` grep -E  -B 2 '\\-\\-control\-plane' /root/kubeinit.log|sed 's/\\\\//g'`
        colorEcho $BLUE "请在其他 node 节点执行完脚本后执行下面命令"
        echo `grep -E  -B 2 '\\-\\-control\-plane' /root/kubeinit.log |grep -v control|sed 's/\\\\//g'`
}
 
 
menu(){
    checkSystem
    colorEcho $BLUE "请选择本机的角色："
    echo "1)master"
    echo "2)node"
    read -p "请选择 k8s 角色（默认 master）" answer
    if [[ -z "$answer" ]]; then
        ROLE="master"
    else
        case $answer in
        1)
            ROLE="master"
            ;;
        2)
            ROLE="node"
            ;;
        *)
            colorEcho $RED "无效的选择，使用默认角色"
            ROLE="master"
        esac
    fi
    echo ""colorEcho $BLUE" 当前 k8s 角色：$ROLE"if [[ $ROLE =='master' ]];then
        colorEcho $BLUE "检测到您设置的角色为 master，请选择行为："
        echo "1) 建立新集群"
        echo "2) 加入旧集群"
        read -p "请选择 master 节点行为（默认建立新集群）" answer
        if [[ -z "$answer" ]]; then
            ACTION="new"
        else
            case $answer in
            1)
                ACTION="new"
                ;;
            2)
                ACTION="old"
                ;;
            *)
                colorEcho $RED "无效的选择，使用默认行为"
                ACTION="new"
            esac
        fi
        echo ""colorEcho $BLUE" 当前 k8s 节点行为：$ACTION"if [[ $ACTION =="new" ]];then
            getip
            preinstall
            installk8s
            init
            greplog
        else
            preinstall
            installk8s
            colorEcho $BLUE "master 节点安装完成，请在主 master 节点日志中拿取命令加入主节点"
            
        fi
 
    else
        preinstall
        installk8s
        colorEcho $BLUE "node 节点安装完成，请在主 master 节点日志中拿取命令加入主节点"
    fi
}
 
main(){menu}
main