【业务功能110】微服务-springcloud-springboot-Kubernetes集群部署-kubeadm极速部署-Docker安装
kubeadm极速部署Kubernetes 1.24版本集群
一、Kubernetes 1.24版本集群部署
1.1 Kubernetes 1.24版本集群部署环境准备
1.1.1 主机操作系统说明
| 序号 | 操作系统及版本 | 备注 |
|---|---|---|
| 1 | CentOS7u9 |
1.1.2 主机硬件配置说明
- 三台主机可以利用虚拟化VMware来部署
1.准备Centos7 iso镜像
2.VMware软件安装好一台虚拟机模板机，本地创建一个文件夹来存放虚拟机，按步骤执行即可，配置好所需要配置的虚拟机配置，时区，网段等
3.虚拟机是由 配置文件 + 硬盘 组成， 那么我们接下来的三台虚拟机部署，就直接用前面的虚拟机模板中的硬盘，来创建(在前面指定的安装目录下 后缀是vmdk的就是磁盘文件)，因为系统都已经安装好在硬盘，所以利用模板去安装剩余的三台真实要使用的虚拟机，就很快了，减少重复的安装步骤
4.分别创建三个文件夹，存放三个虚拟机，将前面模板机的vmdk磁盘文件都放到三个文件夹中，然后继续进行三次安装虚拟机操作，只是其中的 磁盘选项步骤，就是选择现有的对应目录下的模板机的磁盘。这样就可以快速安装好三台虚拟机了
| 需求 | CPU | 内存 | 硬盘 | 角色 | 主机名 |
|---|---|---|---|---|---|
| 值 | 4C | 8G | 100GB | master | k8s-master01 |
| 值 | 4C | 8G | 100GB | worker(node) | k8s-worker01 |
| 值 | 4C | 8G | 100GB | worker(node) | k8s-worker02 |
1.1.3 主机配置
1.1.3.1 主机名配置
由于本次使用3台主机完成kubernetes集群部署，其中1台为master节点,名称为k8s-master01;其中2台为worker节点，名称分别为：k8s-worker01及k8s-worker02
master节点
# hostnamectl set-hostname k8s-master01
worker01节点
# hostnamectl set-hostname k8s-worker01
worker02节点
# hostnamectl set-hostname k8s-worker02
1.1.3.2 主机IP地址配置
- vmware workstation虚拟机的gateway网关就是配置网络网段的第二个ip 比如192.168.10.2，C类地址网段，掩码24位，第二个ip
- 119.29.29.29 腾讯的DNS服务
- 配置好网络 重启后生效 systemctl restart network
k8s-master节点IP地址为：192.168.10.141/24
# vim /etc/sysconfig/network-scripts/ifcfg-ens33
TYPE="Ethernet"
PROXY_METHOD="none"
BROWSER_ONLY="no"
BOOTPROTO="none"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
IPV6_ADDR_GEN_MODE="stable-privacy"
NAME="ens33"
DEVICE="ens33"
ONBOOT="yes"
IPADDR="192.168.10.141"
PREFIX="24"
GATEWAY="192.168.10.2"
DNS1="119.29.29.29"
k8s-worker1节点IP地址为：192.168.10.142/24
# vim /etc/sysconfig/network-scripts/ifcfg-ens33
TYPE="Ethernet"
PROXY_METHOD="none"
BROWSER_ONLY="no"
BOOTPROTO="none"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
IPV6_ADDR_GEN_MODE="stable-privacy"
NAME="ens33"
DEVICE="ens33"
ONBOOT="yes"
IPADDR="192.168.10.142"
PREFIX="24"
GATEWAY="192.168.10.2"
DNS1="119.29.29.29"
k8s-worker2节点IP地址为：192.168.10.143/24
# vim /etc/sysconfig/network-scripts/ifcfg-ens33
TYPE="Ethernet"
PROXY_METHOD="none"
BROWSER_ONLY="no"
BOOTPROTO="none"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
IPV6_ADDR_GEN_MODE="stable-privacy"
NAME="ens33"
DEVICE="ens33"
ONBOOT="yes"
IPADDR="192.168.10.143"
PREFIX="24"
GATEWAY="192.168.10.2"
DNS1="119.29.29.29"
1.1.3.3 主机名与IP地址解析
所有集群主机均需要进行配置。
# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.10.141 k8s-master01
192.168.10.142 k8s-worker01
192.168.10.143 k8s-worker02
1.1.3.4 防火墙配置
所有主机均需要操作。
关闭现有防火墙firewalld
# systemctl disable firewalld
# systemctl stop firewalld
# firewall-cmd --state
not running
1.1.3.5 SELINUX配置
所有主机均需要操作。修改SELinux配置需要重启操作系统。 SELINUX=disabled
# sed -ri 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config
1.1.3.6 时间同步配置
所有主机均需要操作。最小化安装系统需要安装ntpdate软件。
# crontab -l
0 */1 * * * /usr/sbin/ntpdate time1.aliyun.com
1.1.3.7 升级操作系统内核
所有主机均需要操作。
导入elrepo gpg key
# rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org
安装elrepo YUM源仓库
# yum -y install https://www.elrepo.org/elrepo-release-7.0-4.el7.elrepo.noarch.rpm
安装kernel-ml版本，ml为长期稳定版本，lt为长期维护版本
# yum --enablerepo="elrepo-kernel" -y install kernel-lt.x86_64
设置grub2默认引导为0
# grub2-set-default 0
重新生成grub2引导文件
# grub2-mkconfig -o /boot/grub2/grub.cfg
更新后，需要重启，使用升级的内核生效。
# reboot
重启后，需要验证内核是否为更新对应的版本
# uname -r
1.1.3.8 配置内核转发及网桥过滤
所有主机均需要操作。
添加网桥过滤及内核转发配置文件
# cat /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
vm.swappiness = 0
加载br_netfilter模块
# modprobe br_netfilter
查看是否加载
# lsmod | grep br_netfilter
br_netfilter 22256 0
bridge 151336 1 br_netfilter
1.1.3.9 安装ipset及ipvsadm
所有主机均需要操作。 汇总路由，查询方便
安装ipset及ipvsadm
# yum -y install ipset ipvsadm
配置ipvsadm模块加载方式
添加需要加载的模块
# cat > /etc/sysconfig/modules/ipvs.modules <
#!/bin/bash
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack
EOF
授权、运行、检查是否加载
# chmod 755 /etc/sysconfig/modules/ipvs.modules && bash /etc/sysconfig/modules/ipvs.modules && lsmod | grep -e ip_vs -e nf_conntrack
1.1.3.10 关闭SWAP分区
- 开启的话会影响性能，速度 比较慢
修改完成后需要重启操作系统，如不重启，可临时关闭，命令为swapoff -a
永远关闭swap分区，需要重启操作系统
# cat /etc/fstab
......
# /dev/mapper/centos-swap swap swap defaults 0 0
在上一行中行首添加#
1.2 Docker准备
1.2.1 Docker安装YUM源准备
使用阿里云开源软件镜像站。 -O 下载的文件指定放到具体的目录位置
# wget https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo -O /etc/yum.repos.d/docker-ce.repo
1.2.2 Docker安装
# yum -y install docker-ce
1.2.3 启动Docker服务
# systemctl enable --now docker
1.2.4 修改cgroup方式
/etc/docker/daemon.json 默认没有此文件，需要单独创建
在/etc/docker/daemon.json添加如下内容
# cat /etc/docker/daemon.json
{
"exec-opts": ["native.cgroupdriver=systemd"]
}
- 重启docker ， 通过info命令查看是否修改完成 ： 打印出来信息 Cgroup Driver: systemd
# systemctl restart docker
# docker info
1.2.5 cri-dockerd安装
1.2.5.1 golang环境准备
wget https://storage.googleapis.com/golang/getgo/installer_linux
chmod +x ./installer_linux
./installer_linux
source ~/.bash_profile
2.2.5.2 构建并安装cri-dockerd
- 登录github 查询 Mirantis/cri-dockerd 克隆源码到 每一台主机都需要操作 然后根据项目的readme.md查看具体的安装命令步骤，如下
克隆cri-dockerd源码
# git clone https://github.com/Mirantis/cri-dockerd.git
查看克隆下来的目录
# ls
cri-dockerd
查看目录中内容
# ls cri-dockerd/
LICENSE Makefile packaging README.md src VERSION
# cd cri-dockerd
创建bin目录并构建cri-dockerd二进制文件
# mkdir bin
# go get && go build -o ../bin/cri-dockerd
创建/usr/local/bin,默认存在时，可不用创建
# mkdir -p /usr/local/bin
安装cri-dockerd
# install -o root -g root -m 0755 bin/cri-dockerd /usr/local/bin/cri-dockerd
复制服务管理文件至/etc/systemd/system目录中
# cp -a packaging/systemd/* /etc/systemd/system
指定cri-dockerd运行位置
#sed -i -e 's,/usr/bin/cri-dockerd,/usr/local/bin/cri-dockerd,' /etc/systemd/system/cri-docker.service
启动服务
# systemctl daemon-reload
# systemctl enable cri-docker.service
# systemctl enable --now cri-docker.socket
1.3 kubernetes 1.24.X 集群部署
1.3.1 集群软件及版本说明
| kubeadm | kubelet | kubectl | |
|---|---|---|---|
| 版本 | 1.24.X | 1.24.X | 1.24.X |
| 安装位置 | 集群所有主机 | 集群所有主机 | 集群所有主机 |
| 作用 | 初始化集群、管理集群等 | 用于接收api-server指令，对pod生命周期进行管理 | 集群应用命令行管理工具 |
1.3.2 kubernetes YUM源准备
1.3.2.1 谷歌YUM源
[kubernetes]
name=Kubernetes
baseurl=https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=https://packages.cloud.google.com/yum/doc/yum-key.gpg
https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg
1.3.2.2 阿里云YUM源
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
1.3.3 集群软件安装
所有节点均可安装
默认安装
# yum -y install kubeadm kubelet kubectl
查看指定版本
# yum list kubeadm.x86_64 --showduplicates | sort -r
# yum list kubelet.x86_64 --showduplicates | sort -r
# yum list kubectl.x86_64 --showduplicates | sort -r
安装指定版本
# yum -y install kubeadm-1.24.7-0 kubelet-1.24.7-0 kubectl-1.24.7-0
1.3.4 配置kubelet
为了实现docker使用的cgroupdriver与kubelet使用的cgroup的一致性，建议修改如下文件内容。
# vim /etc/sysconfig/kubelet
KUBELET_EXTRA_ARGS="--cgroup-driver=systemd"
设置kubelet为开机自启动即可，由于没有生成配置文件，集群初始化后自动启动
# systemctl enable kubelet
1.3.5 集群镜像准备 只需在master节点主机执行
可使用VPN实现下载。
查看镜像列表，然后将打印出来的镜像列表都下载下来
由于镜像列表较多，可以编写一个脚本文件，循环去通过docker拉取镜像来完成批量的镜像下载
# kubeadm config images list --kubernetes-version=v1.24.7
# cat image_download.sh
#!/bin/bash
images_list='
镜像列表'
for i in $images_list
do
docker pull $i
done
docker save -o k8s-1-24-X.tar $images_list
- 通过 sh image_download.sh 来执行脚本 完成镜像下载
- 脚本中的docker save -o k8s-1-24-X.tar $images_list 是打包成jar包方便去执行
1.3.6 集群初始化 只需在master节点主机执行
[root@k8s-master01 ~]# kubeadm init --kubernetes-version=v1.24.7 --pod-network-cidr=10.224.0.0/16 --apiserver-advertise-address=192.168.10.141 --cri-socket unix:///var/run/cri-dockerd.sock
如果不添加--cri-socket选项，则会报错，内容如下：
Found multiple CRI endpoints on the host. Please define which one do you wish to use by setting the 'criSocket' field in the kubeadm configuration file: unix:///var/run/containerd/containerd.sock, unix:///var/run/cri-dockerd.sock
To see the stack trace of this error execute with --v=5 or higher
初始化过程输出
[init] Using Kubernetes version: v1.24.0
[preflight] Running pre-flight checks
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Generating "ca" certificate and key
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [k8s-master01 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 192.168.10.200]
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [k8s-master01 localhost] and IPs [192.168.10.200 127.0.0.1 ::1]
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [k8s-master01 localhost] and IPs [192.168.10.200 127.0.0.1 ::1]
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[kubeconfig] Writing "admin.conf" kubeconfig file
[kubeconfig] Writing "kubelet.conf" kubeconfig file
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Starting the kubelet
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
[control-plane] Creating static Pod manifest for "kube-scheduler"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[apiclient] All control plane components are healthy after 13.006785 seconds
[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config" in namespace kube-system with the configuration for the kubelets in the cluster
[upload-certs] Skipping phase. Please see --upload-certs
[mark-control-plane] Marking the node k8s-master01 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]
[mark-control-plane] Marking the node k8s-master01 as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule node-role.kubernetes.io/control-plane:NoSchedule]
[bootstrap-token] Using token: 8x4o2u.hslo8xzwwlrncr8s
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes
[bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[kubelet-finalize] Updating "/etc/kubernetes/kubelet.conf" to point to a rotatable kubelet client certificate and key
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy
Your Kubernetes control-plane has initialized successfully!
To start using your cluster, you need to run the following as a regular user:
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
Alternatively, if you are the root user, you can run:
export KUBECONFIG=/etc/kubernetes/admin.conf
You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
https://kubernetes.io/docs/concepts/cluster-administration/addons/
Then you can join any number of worker nodes by running the following on each as root:
kubeadm join 192.168.10.200:6443 --token 8x4o2u.hslo8xzwwlrncr8s \
--discovery-token-ca-cert-hash sha256:7323a8b0658fc33d89e627f078f6eb16ac94394f9a91b3335dd3ce73a3f313a0
1.3.7 集群应用客户端管理集群文件准备
[root@k8s-master01 ~]# mkdir -p $HOME/.kube
[root@k8s-master01 ~]# cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
[root@k8s-master01 ~]# chown $(id -u):$(id -g) $HOME/.kube/config
[root@k8s-master01 ~]# ls /root/.kube/config
//查看节点状态是否成功,显示状态ready 即可
kubectl get nodess
[root@k8s-master01 ~]# export KUBECONFIG=/etc/kubernetes/admin.conf
1.3.8 集群网络准备
使用calico部署集群网络
安装参考网址：https://projectcalico.docs.tigera.io/about/about-calico
1.3.8.1 calico安装 网络配置
- 方式一（不推荐）
下载operator资源清单文件
[root@k8s-master01 ~]# wget https://docs.projectcalico.org/manifests/tigera-operator.yaml
应用资源清单文件，创建operator
[root@k8s-master01 ~]# kubectl create -f tigera-operator.yaml
- 方式二（推荐自定义）
通过自定义资源方式安装
[root@k8s-master01 ~]# wget https://docs.projectcalico.org/manifests/custom-resources.yaml
网络配置,修改网段，前面在集群主节点master初始化的 网络节点地址段才能找到pod-network-cidr=10.224.0.0/16
修改文件第13行，修改为使用kubeadm init ----pod-network-cidr对应的IP地址段
[root@k8s-master01 ~]# vim custom-resources.yaml
......
11 ipPools:
12 - blockSize: 26
13 cidr: 10.224.0.0/16
14 encapsulation: VXLANCrossSubnet
......
//当node无法正常运行时，可考虑在此文件中添加相关内容。 与ipPools同级的参数 注意位置
// ens.* 是网卡的名称匹配 系统默认网卡的名称是ens开头的，具体看系统网卡名称
nodeAddressAutodetectionV4:
interface: ens.*
应用资源清单文件
[root@k8s-master01 ~]# kubectl apply -f custom-resources.yaml
监视calico-sysem命名空间中pod运行情况
[root@k8s-master01 ~]# watch kubectl get pods -n calico-system
Wait until each pod has the
STATUSofRunning.
删除 master 上的 taint
[root@k8s-master01 ~]# kubectl taint nodes --all node-role.kubernetes.io/master-
已经全部运行 查看所有节点命令： kubectl get nodes
[root@k8s-master01 ~]# kubectl get pods -n calico-system
NAME READY STATUS RESTARTS AGE
calico-kube-controllers-666bb9949-dzp68 1/1 Running 0 11m
calico-node-jhcf4 1/1 Running 4 11m
calico-typha-68b96d8d9c-7qfq7 1/1 Running 2 11m
查看kube-system命名空间中coredns状态，处于Running状态表明联网成功。
[root@k8s-master01 ~]# kubectl get pods -n kube-system
NAME READY STATUS RESTARTS AGE
coredns-6d4b75cb6d-js5pl 1/1 Running 0 12h
coredns-6d4b75cb6d-zm8pc 1/1 Running 0 12h
etcd-k8s-master01 1/1 Running 0 12h
kube-apiserver-k8s-master01 1/1 Running 0 12h
kube-controller-manager-k8s-master01 1/1 Running 0 12h
kube-proxy-7nhr7 1/1 Running 0 12h
kube-proxy-fv4kr 1/1 Running 0 12h
kube-proxy-vv5vg 1/1 Running 0 12h
kube-scheduler-k8s-master01 1/1 Running 0 12h
2.3.8.2 calico客户端安装
下载二进制文件
# curl -L https://github.com/projectcalico/calico/releases/download/v3.21.4/calicoctl-linux-amd64 -o calicoctl
安装calicoctl
# mv calicoctl /usr/bin/
为calicoctl添加可执行权限
# chmod +x /usr/bin/calicoctl
查看添加权限后文件
# ls /usr/bin/calicoctl
/usr/bin/calicoctl
查看calicoctl版本
# calicoctl version
Client Version: v3.21.4
Git commit: 220d04c94
Cluster Version: v3.21.4
Cluster Type: typha,kdd,k8s,operator,bgp,kubeadm
通过~/.kube/config连接kubernetes集群，查看已运行节点
# DATASTORE_TYPE=kubernetes KUBECONFIG=~/.kube/config calicoctl get nodes
NAME
k8s-master01
1.3.9 集群工作节点添加
因容器镜像下载较慢，可能会导致报错，主要错误为没有准备好cni（集群网络插件），如有网络，请耐心等待即可。
- 进入到两台worker节点主机进行命令执行
[root@k8s-worker01 ~]# kubeadm join 192.168.10.200:6443 --token 8x4o2u.hslo8xzwwlrncr8s \ --discovery-token-ca-cert-hash sha256:7323a8b0658fc33d89e627f078f6eb16ac94394f9a91b3335dd3ce73a3f313a0 --cri-socket unix:///var/run/cri-dockerd.sock
[root@k8s-worker02 ~]# kubeadm join 192.168.10.200:6443 --token 8x4o2u.hslo8xzwwlrncr8s \
--discovery-token-ca-cert-hash sha256:7323a8b0658fc33d89e627f078f6eb16ac94394f9a91b3335dd3ce73a3f313a0 --cri-socket unix:///var/run/cri-dockerd.sock
在master节点上操作，查看网络节点是否添加： kubectl get nodes
# DATASTORE_TYPE=kubernetes KUBECONFIG=~/.kube/config calicoctl get nodes
NAME
k8s-master01
k8s-worker01
k8s-worker02
二、 验证集群可用性
查看所有的节点
[root@k8s-master01 ~]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
k8s-master01 Ready control-plane 12h v1.24.0
k8s-worker01 Ready 12h v1.24.0
k8s-worker02 Ready 12h v1.24.0
查看集群健康情况
[root@k8s-master01 ~]# kubectl get cs
Warning: v1 ComponentStatus is deprecated in v1.19+
NAME STATUS MESSAGE ERROR
controller-manager Healthy ok
scheduler Healthy ok
etcd-0 Healthy {"health":"true","reason":""}
查看kubernetes集群pod运行情况
[root@k8s-master01 ~]# kubectl get pods -n kube-system
NAME READY STATUS RESTARTS AGE
coredns-6d4b75cb6d-js5pl 1/1 Running 0 12h
coredns-6d4b75cb6d-zm8pc 1/1 Running 0 12h
etcd-k8s-master01 1/1 Running 0 12h
kube-apiserver-k8s-master01 1/1 Running 0 12h
kube-controller-manager-k8s-master01 1/1 Running 0 12h
kube-proxy-7nhr7 1/1 Running 0 12h
kube-proxy-fv4kr 1/1 Running 0 12h
kube-proxy-vv5vg 1/1 Running 0 12h
kube-scheduler-k8s-master01 1/1 Running 0 12h
再次查看calico-system命名空间中pod运行情况。
[root@k8s-master01 ~]# kubectl get pods -n calico-system
NAME READY STATUS RESTARTS AGE
calico-kube-controllers-5b544d9b48-xgfnk 1/1 Running 0 12h
calico-node-7clf4 1/1 Running 0 12h
calico-node-cjwns 1/1 Running 0 12h
calico-node-hhr4n 1/1 Running 0 12h
calico-typha-6cb6976b97-5lnpk 1/1 Running 0 12h
calico-typha-6cb6976b97-9w9s8 1/1 Running 0 12h