聊聊druid的borrow行为

本文主要研究一下druid的borrow行为

getConnection

com/alibaba/druid/pool/DruidDataSource.java

    public DruidPooledConnection getConnection() throws SQLException {
        return getConnection(maxWait);
    }

    public DruidPooledConnection getConnection(long maxWaitMillis) throws SQLException {
        init();

        if (filters.size() > 0) {
            FilterChainImpl filterChain = new FilterChainImpl(this);
            return filterChain.dataSource_connect(this, maxWaitMillis);
        } else {
            return getConnectionDirect(maxWaitMillis);
        }
    }
DruidDataSource的getConnection方法内部调用的是getConnectionDirect(maxWaitMillis)

getConnectionDirect

com/alibaba/druid/pool/DruidDataSource.java

    public DruidPooledConnection getConnectionDirect(long maxWaitMillis) throws SQLException {
        int notFullTimeoutRetryCnt = 0;
        for (; ; ) {
            // handle notFullTimeoutRetry
            DruidPooledConnection poolableConnection;
            try {
                poolableConnection = getConnectionInternal(maxWaitMillis);
            } catch (GetConnectionTimeoutException ex) {
                if (notFullTimeoutRetryCnt <= this.notFullTimeoutRetryCount && !isFull()) {
                    notFullTimeoutRetryCnt++;
                    if (LOG.isWarnEnabled()) {
                        LOG.warn("get connection timeout retry : " + notFullTimeoutRetryCnt);
                    }
                    continue;
                }
                throw ex;
            }

            if (testOnBorrow) {
                boolean validate = testConnectionInternal(poolableConnection.holder, poolableConnection.conn);
                if (!validate) {
                    if (LOG.isDebugEnabled()) {
                        LOG.debug("skip not validate connection.");
                    }

                    discardConnection(poolableConnection.holder);
                    continue;
                }
            } else {
                if (poolableConnection.conn.isClosed()) {
                    discardConnection(poolableConnection.holder); // 传入null,避免重复关闭
                    continue;
                }

                if (testWhileIdle) {
                    final DruidConnectionHolder holder = poolableConnection.holder;
                    long currentTimeMillis = System.currentTimeMillis();
                    long lastActiveTimeMillis = holder.lastActiveTimeMillis;
                    long lastExecTimeMillis = holder.lastExecTimeMillis;
                    long lastKeepTimeMillis = holder.lastKeepTimeMillis;

                    if (checkExecuteTime
                            && lastExecTimeMillis != lastActiveTimeMillis) {
                        lastActiveTimeMillis = lastExecTimeMillis;
                    }

                    if (lastKeepTimeMillis > lastActiveTimeMillis) {
                        lastActiveTimeMillis = lastKeepTimeMillis;
                    }

                    long idleMillis = currentTimeMillis - lastActiveTimeMillis;

                    long timeBetweenEvictionRunsMillis = this.timeBetweenEvictionRunsMillis;

                    if (timeBetweenEvictionRunsMillis <= 0) {
                        timeBetweenEvictionRunsMillis = DEFAULT_TIME_BETWEEN_EVICTION_RUNS_MILLIS;
                    }

                    if (idleMillis >= timeBetweenEvictionRunsMillis
                            || idleMillis < 0 // unexcepted branch
                    ) {
                        boolean validate = testConnectionInternal(poolableConnection.holder, poolableConnection.conn);
                        if (!validate) {
                            if (LOG.isDebugEnabled()) {
                                LOG.debug("skip not validate connection.");
                            }

                            discardConnection(poolableConnection.holder);
                            continue;
                        }
                    }
                }
            }

            if (removeAbandoned) {
                StackTraceElement[] stackTrace = Thread.currentThread().getStackTrace();
                poolableConnection.connectStackTrace = stackTrace;
                poolableConnection.setConnectedTimeNano();
                poolableConnection.traceEnable = true;

                activeConnectionLock.lock();
                try {
                    activeConnections.put(poolableConnection, PRESENT);
                } finally {
                    activeConnectionLock.unlock();
                }
            }

            if (!this.defaultAutoCommit) {
                poolableConnection.setAutoCommit(false);
            }

            return poolableConnection;
        }
    }

    public boolean isFull() {
        lock.lock();
        try {
            return this.poolingCount + this.activeCount >= this.maxActive;
        } finally {
            lock.unlock();
        }
    }

getConnectionDirect在一个for循环里头进行获取连接,首先执行getConnectionInternal(maxWaitMillis),若出现GetConnectionTimeoutException异常,则在notFull且notFullTimeoutRetryCnt小于等于this.notFullTimeoutRetryCount时会递增notFullTimeoutRetryCnt,然后continue继续循环,否则直接抛出GetConnectionTimeoutException跳出循环

获取到连接之后,判断是否是testOnBorrow,如果是则执行testConnectionInternal,若校验不成功则执行discardConnection,然后继续循环;若非testOnBorrow则判断conn是否closed,若是则执行discardConnection,然后继续循环,若非closed则进入testWhileIdle的逻辑(druid直接在getConnection的时候执行testWhileIdle有点令人匪夷所思)

最后是removeAbandoned,维护connectedTimeNano,将当前连接放到activeConnections中

getConnectionInternal

com/alibaba/druid/pool/DruidDataSource.java

    private DruidPooledConnection getConnectionInternal(long maxWait) throws SQLException {
        if (closed) {
            connectErrorCountUpdater.incrementAndGet(this);
            throw new DataSourceClosedException("dataSource already closed at " + new Date(closeTimeMillis));
        }

        if (!enable) {
            connectErrorCountUpdater.incrementAndGet(this);

            if (disableException != null) {
                throw disableException;
            }

            throw new DataSourceDisableException();
        }

        final long nanos = TimeUnit.MILLISECONDS.toNanos(maxWait);
        final int maxWaitThreadCount = this.maxWaitThreadCount;

        DruidConnectionHolder holder;

        for (boolean createDirect = false; ; ) {
            if (createDirect) {
                createStartNanosUpdater.set(this, System.nanoTime());
                if (creatingCountUpdater.compareAndSet(this, 0, 1)) {
                    PhysicalConnectionInfo pyConnInfo = DruidDataSource.this.createPhysicalConnection();
                    holder = new DruidConnectionHolder(this, pyConnInfo);
                    holder.lastActiveTimeMillis = System.currentTimeMillis();

                    creatingCountUpdater.decrementAndGet(this);
                    directCreateCountUpdater.incrementAndGet(this);

                    if (LOG.isDebugEnabled()) {
                        LOG.debug("conn-direct_create ");
                    }

                    boolean discard;
                    lock.lock();
                    try {
                        if (activeCount < maxActive) {
                            activeCount++;
                            holder.active = true;
                            if (activeCount > activePeak) {
                                activePeak = activeCount;
                                activePeakTime = System.currentTimeMillis();
                            }
                            break;
                        } else {
                            discard = true;
                        }
                    } finally {
                        lock.unlock();
                    }

                    if (discard) {
                        JdbcUtils.close(pyConnInfo.getPhysicalConnection());
                    }
                }
            }

            try {
                lock.lockInterruptibly();
            } catch (InterruptedException e) {
                connectErrorCountUpdater.incrementAndGet(this);
                throw new SQLException("interrupt", e);
            }

            try {
                if (maxWaitThreadCount > 0
                        && notEmptyWaitThreadCount >= maxWaitThreadCount) {
                    connectErrorCountUpdater.incrementAndGet(this);
                    throw new SQLException("maxWaitThreadCount " + maxWaitThreadCount + ", current wait Thread count "
                            + lock.getQueueLength());
                }

                if (onFatalError
                        && onFatalErrorMaxActive > 0
                        && activeCount >= onFatalErrorMaxActive) {
                    connectErrorCountUpdater.incrementAndGet(this);

                    StringBuilder errorMsg = new StringBuilder();
                    errorMsg.append("onFatalError, activeCount ")
                            .append(activeCount)
                            .append(", onFatalErrorMaxActive ")
                            .append(onFatalErrorMaxActive);

                    if (lastFatalErrorTimeMillis > 0) {
                        errorMsg.append(", time '")
                                .append(StringUtils.formatDateTime19(
                                        lastFatalErrorTimeMillis, TimeZone.getDefault()))
                                .append("'");
                    }

                    if (lastFatalErrorSql != null) {
                        errorMsg.append(", sql \n")
                                .append(lastFatalErrorSql);
                    }

                    throw new SQLException(
                            errorMsg.toString(), lastFatalError);
                }

                connectCount++;

                if (createScheduler != null
                        && poolingCount == 0
                        && activeCount < maxActive
                        && creatingCountUpdater.get(this) == 0
                        && createScheduler instanceof ScheduledThreadPoolExecutor) {
                    ScheduledThreadPoolExecutor executor = (ScheduledThreadPoolExecutor) createScheduler;
                    if (executor.getQueue().size() > 0) {
                        createDirect = true;
                        continue;
                    }
                }

                if (maxWait > 0) {
                    holder = pollLast(nanos);
                } else {
                    holder = takeLast();
                }

                if (holder != null) {
                    if (holder.discard) {
                        continue;
                    }

                    activeCount++;
                    holder.active = true;
                    if (activeCount > activePeak) {
                        activePeak = activeCount;
                        activePeakTime = System.currentTimeMillis();
                    }
                }
            } catch (InterruptedException e) {
                connectErrorCountUpdater.incrementAndGet(this);
                throw new SQLException(e.getMessage(), e);
            } catch (SQLException e) {
                connectErrorCountUpdater.incrementAndGet(this);
                throw e;
            } finally {
                lock.unlock();
            }

            break;
        }

        if (holder == null) {
            long waitNanos = waitNanosLocal.get();

            final long activeCount;
            final long maxActive;
            final long creatingCount;
            final long createStartNanos;
            final long createErrorCount;
            final Throwable createError;
            try {
                lock.lock();
                activeCount = this.activeCount;
                maxActive = this.maxActive;
                creatingCount = this.creatingCount;
                createStartNanos = this.createStartNanos;
                createErrorCount = this.createErrorCount;
                createError = this.createError;
            } finally {
                lock.unlock();
            }

            StringBuilder buf = new StringBuilder(128);
            buf.append("wait millis ")
                    .append(waitNanos / (1000 * 1000))
                    .append(", active ").append(activeCount)
                    .append(", maxActive ").append(maxActive)
                    .append(", creating ").append(creatingCount);

            if (creatingCount > 0 && createStartNanos > 0) {
                long createElapseMillis = (System.nanoTime() - createStartNanos) / (1000 * 1000);
                if (createElapseMillis > 0) {
                    buf.append(", createElapseMillis ").append(createElapseMillis);
                }
            }

            if (createErrorCount > 0) {
                buf.append(", createErrorCount ").append(createErrorCount);
            }

            List sqlList = this.getDataSourceStat().getRuningSqlList();
            for (int i = 0; i < sqlList.size(); ++i) {
                if (i != 0) {
                    buf.append('\n');
                } else {
                    buf.append(", ");
                }
                JdbcSqlStatValue sql = sqlList.get(i);
                buf.append("runningSqlCount ").append(sql.getRunningCount());
                buf.append(" : ");
                buf.append(sql.getSql());
            }

            String errorMessage = buf.toString();

            if (createError != null) {
                throw new GetConnectionTimeoutException(errorMessage, createError);
            } else {
                throw new GetConnectionTimeoutException(errorMessage);
            }
        }

        holder.incrementUseCount();

        DruidPooledConnection poolalbeConnection = new DruidPooledConnection(holder);
        return poolalbeConnection;
    }

getConnectionInternal方法先判断是否closed,如果是则抛出DataSourceClosedException,接着判断是否enable,如果不是则抛出DataSourceDisableException,紧接着for循环,它主要根据createDirect来执行不同逻辑,第一次默认createDirect为false;

createDirect为false,对于notEmptyWaitThreadCount大于等于maxWaitThreadCount则抛出SQLException,对于poolingCount为0且activeCount小于maxActive,createScheduler的queue大小大于0的,则设置createDirect为true;否则对于maxWait大于0的,执行pollLast(nanos),否则执行takeLast()

createDirect为true,会通过DruidDataSource.this.createPhysicalConnection()创建物理连接,对于activeCount小于maxActive的,则维护activeCount跳出循环,否则标记discard为true,通过JdbcUtils.close(pyConnInfo.getPhysicalConnection())关闭连接

pollLast

    private DruidConnectionHolder pollLast(long nanos) throws InterruptedException, SQLException {
        long estimate = nanos;

        for (; ; ) {
            if (poolingCount == 0) {
                emptySignal(); // send signal to CreateThread create connection

                if (failFast && isFailContinuous()) {
                    throw new DataSourceNotAvailableException(createError);
                }

                if (estimate <= 0) {
                    waitNanosLocal.set(nanos - estimate);
                    return null;
                }

                notEmptyWaitThreadCount++;
                if (notEmptyWaitThreadCount > notEmptyWaitThreadPeak) {
                    notEmptyWaitThreadPeak = notEmptyWaitThreadCount;
                }

                try {
                    long startEstimate = estimate;
                    estimate = notEmpty.awaitNanos(estimate); // signal by
                    // recycle or
                    // creator
                    notEmptyWaitCount++;
                    notEmptyWaitNanos += (startEstimate - estimate);

                    if (!enable) {
                        connectErrorCountUpdater.incrementAndGet(this);

                        if (disableException != null) {
                            throw disableException;
                        }

                        throw new DataSourceDisableException();
                    }
                } catch (InterruptedException ie) {
                    notEmpty.signal(); // propagate to non-interrupted thread
                    notEmptySignalCount++;
                    throw ie;
                } finally {
                    notEmptyWaitThreadCount--;
                }

                if (poolingCount == 0) {
                    if (estimate > 0) {
                        continue;
                    }

                    waitNanosLocal.set(nanos - estimate);
                    return null;
                }
            }

            decrementPoolingCount();
            DruidConnectionHolder last = connections[poolingCount];
            connections[poolingCount] = null;

            long waitNanos = nanos - estimate;
            last.setLastNotEmptyWaitNanos(waitNanos);

            return last;
        }
    }
pollLast方法在poolingCount为0时执行emptySignal,另外主要是处理notEmpty这个condition,然后取connections[poolingCount]

takeLast

    DruidConnectionHolder takeLast() throws InterruptedException, SQLException {
        try {
            while (poolingCount == 0) {
                emptySignal(); // send signal to CreateThread create connection

                if (failFast && isFailContinuous()) {
                    throw new DataSourceNotAvailableException(createError);
                }

                notEmptyWaitThreadCount++;
                if (notEmptyWaitThreadCount > notEmptyWaitThreadPeak) {
                    notEmptyWaitThreadPeak = notEmptyWaitThreadCount;
                }
                try {
                    notEmpty.await(); // signal by recycle or creator
                } finally {
                    notEmptyWaitThreadCount--;
                }
                notEmptyWaitCount++;

                if (!enable) {
                    connectErrorCountUpdater.incrementAndGet(this);
                    if (disableException != null) {
                        throw disableException;
                    }

                    throw new DataSourceDisableException();
                }
            }
        } catch (InterruptedException ie) {
            notEmpty.signal(); // propagate to non-interrupted thread
            notEmptySignalCount++;
            throw ie;
        }

        decrementPoolingCount();
        DruidConnectionHolder last = connections[poolingCount];
        connections[poolingCount] = null;

        return last;
    }
takeLast方法在poolingCount为0的时候执行emptySignal,然后通过notEmpty.await()进行阻塞等待,最后返回connections[poolingCount]

emptySignal

    private void emptySignal() {
        if (createScheduler == null) {
            empty.signal();
            return;
        }

        if (createTaskCount >= maxCreateTaskCount) {
            return;
        }

        if (activeCount + poolingCount + createTaskCount >= maxActive) {
            return;
        }
        submitCreateTask(false);
    }
emptySignal方法,对于createScheduler为null的执行empty.signal(),之后判断task数量即maxActive判断,最后执行submitCreateTask(false)

submitCreateTask

    private void submitCreateTask(boolean initTask) {
        createTaskCount++;
        CreateConnectionTask task = new CreateConnectionTask(initTask);
        if (createTasks == null) {
            createTasks = new long[8];
        }

        boolean putted = false;
        for (int i = 0; i < createTasks.length; ++i) {
            if (createTasks[i] == 0) {
                createTasks[i] = task.taskId;
                putted = true;
                break;
            }
        }
        if (!putted) {
            long[] array = new long[createTasks.length * 3 / 2];
            System.arraycopy(createTasks, 0, array, 0, createTasks.length);
            array[createTasks.length] = task.taskId;
            createTasks = array;
        }

        this.createSchedulerFuture = createScheduler.submit(task);
    }
submitCreateTask会创建CreateConnectionTask,然后提交到createScheduler执行

CreateConnectionTask

com/alibaba/druid/pool/DruidDataSource.java

    public class CreateConnectionTask implements Runnable {
        private int errorCount;
        private boolean initTask;
        private final long taskId;

        public CreateConnectionTask() {
            taskId = createTaskIdSeedUpdater.getAndIncrement(DruidDataSource.this);
        }

        public CreateConnectionTask(boolean initTask) {
            taskId = createTaskIdSeedUpdater.getAndIncrement(DruidDataSource.this);
            this.initTask = initTask;
        }

        @Override
        public void run() {
            runInternal();
        }

        private void runInternal() {
            for (; ; ) {
                // addLast
                lock.lock();
                try {
                    if (closed || closing) {
                        clearCreateTask(taskId);
                        return;
                    }

                    boolean emptyWait = true;

                    if (createError != null && poolingCount == 0) {
                        emptyWait = false;
                    }

                    if (emptyWait) {
                        // 必须存在线程等待,才创建连接
                        if (poolingCount >= notEmptyWaitThreadCount //
                                && (!(keepAlive && activeCount + poolingCount < minIdle)) // 在keepAlive场景不能放弃创建
                                && (!initTask) // 线程池初始化时的任务不能放弃创建
                                && !isFailContinuous() // failContinuous时不能放弃创建,否则会无法创建线程
                                && !isOnFatalError() // onFatalError时不能放弃创建,否则会无法创建线程
                        ) {
                            clearCreateTask(taskId);
                            return;
                        }

                        // 防止创建超过maxActive数量的连接
                        if (activeCount + poolingCount >= maxActive) {
                            clearCreateTask(taskId);
                            return;
                        }
                    }
                } finally {
                    lock.unlock();
                }

                PhysicalConnectionInfo physicalConnection = null;

                try {
                    physicalConnection = createPhysicalConnection();
                } catch (OutOfMemoryError e) {
                    LOG.error("create connection OutOfMemoryError, out memory. ", e);

                    errorCount++;
                    if (errorCount > connectionErrorRetryAttempts && timeBetweenConnectErrorMillis > 0) {
                        // fail over retry attempts
                        setFailContinuous(true);
                        if (failFast) {
                            lock.lock();
                            try {
                                notEmpty.signalAll();
                            } finally {
                                lock.unlock();
                            }
                        }

                        if (breakAfterAcquireFailure) {
                            lock.lock();
                            try {
                                clearCreateTask(taskId);
                            } finally {
                                lock.unlock();
                            }
                            return;
                        }

                        this.errorCount = 0; // reset errorCount
                        if (closing || closed) {
                            lock.lock();
                            try {
                                clearCreateTask(taskId);
                            } finally {
                                lock.unlock();
                            }
                            return;
                        }

                        createSchedulerFuture = createScheduler.schedule(this, timeBetweenConnectErrorMillis, TimeUnit.MILLISECONDS);
                        return;
                    }
                } catch (SQLException e) {
                    LOG.error("create connection SQLException, url: " + jdbcUrl, e);

                    errorCount++;
                    if (errorCount > connectionErrorRetryAttempts && timeBetweenConnectErrorMillis > 0) {
                        // fail over retry attempts
                        setFailContinuous(true);
                        if (failFast) {
                            lock.lock();
                            try {
                                notEmpty.signalAll();
                            } finally {
                                lock.unlock();
                            }
                        }

                        if (breakAfterAcquireFailure) {
                            lock.lock();
                            try {
                                clearCreateTask(taskId);
                            } finally {
                                lock.unlock();
                            }
                            return;
                        }

                        this.errorCount = 0; // reset errorCount
                        if (closing || closed) {
                            lock.lock();
                            try {
                                clearCreateTask(taskId);
                            } finally {
                                lock.unlock();
                            }
                            return;
                        }

                        createSchedulerFuture = createScheduler.schedule(this, timeBetweenConnectErrorMillis, TimeUnit.MILLISECONDS);
                        return;
                    }
                } catch (RuntimeException e) {
                    LOG.error("create connection RuntimeException", e);
                    // unknow fatal exception
                    setFailContinuous(true);
                    continue;
                } catch (Error e) {
                    lock.lock();
                    try {
                        clearCreateTask(taskId);
                    } finally {
                        lock.unlock();
                    }
                    LOG.error("create connection Error", e);
                    // unknow fatal exception
                    setFailContinuous(true);
                    break;
                } catch (Throwable e) {
                    lock.lock();
                    try {
                        clearCreateTask(taskId);
                    } finally {
                        lock.unlock();
                    }

                    LOG.error("create connection unexecpted error.", e);
                    break;
                }

                if (physicalConnection == null) {
                    continue;
                }

                physicalConnection.createTaskId = taskId;
                boolean result = put(physicalConnection);
                if (!result) {
                    JdbcUtils.close(physicalConnection.getPhysicalConnection());
                    LOG.info("put physical connection to pool failed.");
                }
                break;
            }
        }
    }
CreateConnectionTask通过for循环,然后加锁处理minIdle及maxActive,最后通过createPhysicalConnection创建物理连接

createPhysicalConnection

com/alibaba/druid/pool/DruidAbstractDataSource.java

    public PhysicalConnectionInfo createPhysicalConnection() throws SQLException {
        String url = this.getUrl();
        Properties connectProperties = getConnectProperties();

        String user;
        if (getUserCallback() != null) {
            user = getUserCallback().getName();
        } else {
            user = getUsername();
        }

        String password = getPassword();
        PasswordCallback passwordCallback = getPasswordCallback();

        if (passwordCallback != null) {
            if (passwordCallback instanceof DruidPasswordCallback) {
                DruidPasswordCallback druidPasswordCallback = (DruidPasswordCallback) passwordCallback;

                druidPasswordCallback.setUrl(url);
                druidPasswordCallback.setProperties(connectProperties);
            }

            char[] chars = passwordCallback.getPassword();
            if (chars != null) {
                password = new String(chars);
            }
        }

        Properties physicalConnectProperties = new Properties();
        if (connectProperties != null) {
            physicalConnectProperties.putAll(connectProperties);
        }

        if (user != null && user.length() != 0) {
            physicalConnectProperties.put("user", user);
        }

        if (password != null && password.length() != 0) {
            physicalConnectProperties.put("password", password);
        }

        Connection conn = null;

        long connectStartNanos = System.nanoTime();
        long connectedNanos, initedNanos, validatedNanos;

        Map variables = initVariants
                ? new HashMap()
                : null;
        Map globalVariables = initGlobalVariants
                ? new HashMap()
                : null;

        createStartNanosUpdater.set(this, connectStartNanos);
        creatingCountUpdater.incrementAndGet(this);
        try {
            conn = createPhysicalConnection(url, physicalConnectProperties);
            connectedNanos = System.nanoTime();

            if (conn == null) {
                throw new SQLException("connect error, url " + url + ", driverClass " + this.driverClass);
            }

            initPhysicalConnection(conn, variables, globalVariables);
            initedNanos = System.nanoTime();

            validateConnection(conn);
            validatedNanos = System.nanoTime();

            setFailContinuous(false);
            setCreateError(null);
        } catch (SQLException ex) {
            setCreateError(ex);
            JdbcUtils.close(conn);
            throw ex;
        } catch (RuntimeException ex) {
            setCreateError(ex);
            JdbcUtils.close(conn);
            throw ex;
        } catch (Error ex) {
            createErrorCountUpdater.incrementAndGet(this);
            setCreateError(ex);
            JdbcUtils.close(conn);
            throw ex;
        } finally {
            long nano = System.nanoTime() - connectStartNanos;
            createTimespan += nano;
            creatingCountUpdater.decrementAndGet(this);
        }

        return new PhysicalConnectionInfo(conn, connectStartNanos, connectedNanos, initedNanos, validatedNanos, variables, globalVariables);
    }
createPhysicalConnection通过try catch去创建物理连接,若有异常则会通过JdbcUtils.close(conn)去关闭连接

testConnectionInternal

    protected boolean testConnectionInternal(DruidConnectionHolder holder, Connection conn) {
        String sqlFile = JdbcSqlStat.getContextSqlFile();
        String sqlName = JdbcSqlStat.getContextSqlName();

        if (sqlFile != null) {
            JdbcSqlStat.setContextSqlFile(null);
        }
        if (sqlName != null) {
            JdbcSqlStat.setContextSqlName(null);
        }
        try {
            if (validConnectionChecker != null) {
                boolean valid = validConnectionChecker.isValidConnection(conn, validationQuery, validationQueryTimeout);
                long currentTimeMillis = System.currentTimeMillis();
                if (holder != null) {
                    holder.lastValidTimeMillis = currentTimeMillis;
                    holder.lastExecTimeMillis = currentTimeMillis;
                }

                if (valid && isMySql) { // unexcepted branch
                    long lastPacketReceivedTimeMs = MySqlUtils.getLastPacketReceivedTimeMs(conn);
                    if (lastPacketReceivedTimeMs > 0) {
                        long mysqlIdleMillis = currentTimeMillis - lastPacketReceivedTimeMs;
                        if (lastPacketReceivedTimeMs > 0 //
                                && mysqlIdleMillis >= timeBetweenEvictionRunsMillis) {
                            discardConnection(holder);
                            String errorMsg = "discard long time none received connection. "
                                    + ", jdbcUrl : " + jdbcUrl
                                    + ", version : " + VERSION.getVersionNumber()
                                    + ", lastPacketReceivedIdleMillis : " + mysqlIdleMillis;
                            LOG.warn(errorMsg);
                            return false;
                        }
                    }
                }

                if (valid && onFatalError) {
                    lock.lock();
                    try {
                        if (onFatalError) {
                            onFatalError = false;
                        }
                    } finally {
                        lock.unlock();
                    }
                }

                return valid;
            }

            if (conn.isClosed()) {
                return false;
            }

            if (null == validationQuery) {
                return true;
            }

            Statement stmt = null;
            ResultSet rset = null;
            try {
                stmt = conn.createStatement();
                if (getValidationQueryTimeout() > 0) {
                    stmt.setQueryTimeout(validationQueryTimeout);
                }
                rset = stmt.executeQuery(validationQuery);
                if (!rset.next()) {
                    return false;
                }
            } finally {
                JdbcUtils.close(rset);
                JdbcUtils.close(stmt);
            }

            if (onFatalError) {
                lock.lock();
                try {
                    if (onFatalError) {
                        onFatalError = false;
                    }
                } finally {
                    lock.unlock();
                }
            }

            return true;
        } catch (Throwable ex) {
            // skip
            return false;
        } finally {
            if (sqlFile != null) {
                JdbcSqlStat.setContextSqlFile(sqlFile);
            }
            if (sqlName != null) {
                JdbcSqlStat.setContextSqlName(sqlName);
            }
        }
    }
testConnectionInternal主要通过validConnectionChecker.isValidConnection(conn, validationQuery, validationQueryTimeout)来校验连接,如果validConnectionChecker为null则通过jdbc执行validationQuery进行校验

discardConnection

    public void discardConnection(DruidConnectionHolder holder) {
        if (holder == null) {
            return;
        }

        Connection conn = holder.getConnection();
        if (conn != null) {
            JdbcUtils.close(conn);
        }

        lock.lock();
        try {
            if (holder.discard) {
                return;
            }

            if (holder.active) {
                activeCount--;
                holder.active = false;
            }
            discardCount++;

            holder.discard = true;

            if (activeCount <= minIdle) {
                emptySignal();
            }
        } finally {
            lock.unlock();
        }
    }
discardConnection方法主要是关闭connection,之后枷锁处理一些统计标记

小结

DruidDataSource的getConnection方法内部调用的是getConnectionDirect(maxWaitMillis)

getConnectionDirect在一个for循环里头进行获取连接,首先执行getConnectionInternal(maxWaitMillis),若出现GetConnectionTimeoutException异常,则在notFull且notFullTimeoutRetryCnt小于等于this.notFullTimeoutRetryCount时会递增notFullTimeoutRetryCnt,然后continue继续循环,否则直接抛出GetConnectionTimeoutException跳出循环

获取到连接之后,判断是否是testOnBorrow,如果是则执行testConnectionInternal,若校验不成功则执行discardConnection,然后继续循环;若非testOnBorrow则判断conn是否closed,若是则执行discardConnection,然后继续循环,若非closed则进入testWhileIdle的逻辑

最后是removeAbandoned,维护connectedTimeNano,将当前连接放到activeConnections中

整体代码看下来感觉跟commons-pool相比,druid代码的实现感觉有点粗糙,抽象层级不够高,代码充斥大量统计标记、状态位的处理,维护起来得很小心,另外druid直接在getConnection的时候执行testWhileIdle有点令人匪夷所思

你可能感兴趣的:(druid)