GitLab维护和升级
升级
到清华大学镜像下载apt包
https://mirrors.tuna.tsinghua.edu.cn/gitlab-ce/ubuntu/pool/xenial/main/g/gitlab-ce/
https://mirrors.tuna.tsinghua.edu.cn/gitlab-ee/ubuntu/pool/xenial/main/g/gitlab-ee/
这个xenial是对应Ubuntu 16.04的
直接sudo apt install ./xxxx.deb，不能暂停服务，否则无法备份然后失败
升级前需要备份
备份
https://docs.gitlab.com/ce/raketasks/backup_restore.html#restore-for-omnibus-installations
sudo gitlab-backup create STRATEGY=copy
同时备份 /etc/gitlab/gitlab-secrets.json，不然所有的tokens都会丢失
备份gitlab配置信息 /etc/gitlab/gitlab.rb
汉化
代码地址：https://gitlab.com/xhang/gitlab
下载对应的中文包，解压，删掉log，tmp文件夹
修改文件夹权限为root:root
sudo gitlab-ctl stop
sudo cp -rf 文件夹/* /opt/gitlab/embbled/services/gitlab-rails
相当于覆盖冲突的文件，注意不能直接删掉后面那个文件后移动
sudo gitlab-ctl reconfigure
sudo gitlab-ctl restart
没问题的话汉化成功
恢复
https://docs.gitlab.com/ce/raketasks/backup_restore.html#restore-for-omnibus-gitlab-installations
写得很详细了
万一玩崩了
- 数据库没坏
sudo apt --reinstall ./xxxxx.deb 重装解决问题
- 数据库坏了
重装并恢复
Runner升级
https://docs.gitlab.com/runner/install/linux-manually.html
下载到/usr/local/bin并增加可执行权限
然后在gitlab后台删掉老的runner并
sudo gitlab-runner register
重新创建一个runner，保证两个runner的标签名称一致，注册为shared或者私有看原来是什么，注册完要重启gitlab服务器
sudo gitlab-ctl restart
502问题
Note that on a single-core server it may take up to a minute to restart Unicorn and Sidekiq. Your GitLab instance will give a 502 error until Unicorn is up again.
It is also possible to start, stop or restart individual components.
sudo gitlab-ctl restart sidekiq
Unicorn supports zero-downtime reloads. These can be triggered as follows:
sudo gitlab-ctl hup unicorn
Note that you cannot use a Unicorn reload to update the Ruby runtime.
源地址