pg14安装_rpm方式
一、前期准备
发现生产环境有用rpm安装，故整理安装rpm安装步骤，目的是准备walminer恢复数据用的环境
二、安装包下载
https://download.postgresql.org/pub/repos/yum/ 含多个版本
https://download.postgresql.org/pub/repos/yum/14/redhat/rhel-7-x86_64/ 仅14版本
postgresql14-server-14.8-1PGDG.rhel7.x86_64.rpm
postgresql14-libs-14.8-1PGDG.rhel7.x86_64.rpm
postgresql14-14.8-1PGDG.rhel7.x86_64.rpm
postgresql14-contrib-14.8-1PGDG.rhel7.x86_64.rpm
三、环境准备
环境准备需要使用root用户进行操作。本文档以CentOS7.9发行版操作系统为例，命令如下。如若是其他的linux发行版，准备工作这一块内容操作步骤是差不多的，linux命令需要调整。
3.1、配置本地yum源
--上传操作系统镜像到/opt目录
[root@localhost ~]# ls -l /opt | grep Cen*
-rw-r--r--. 1 root root 4712300544 Aug 8 05:27 CentOS-7-x86_64-DVD-2009.iso
--挂载镜像
[root@localhost ~]# mount /opt/CentOS-7-x86_64-DVD-2009.iso /mnt/
[root@localhost ~]# df -h | grep mnt
/dev/loop0 4.4G 4.4G 0 100% /mnt
--设置开机挂载
cat << EOF >> /etc/fstab
/dev/loop0 /mnt iso9660 loop 0 0
EOF
--配置本地yum源文件
mkdir -p /etc/yum.repos.d/bak
mv /etc/yum.repos.d/*.repo /etc/yum.repos.d/bak
cat >> /etc/yum.repos.d/os.repo <<"EOF"
[OS1]
name=OS
baseurl=file:///mnt
enabled=1
gpgcheck=0
EOF
3.2、安装依赖包
首先需要安装一些必要的依赖，PostgreSQL安装的过程需要使用到这些linux包。
yum install libxslt libicu python36-libs python2-libs libperl.so
3.3、关闭防火墙
禁用和启用二选一
--禁用防火墙
systemctl stop firewalld.service
systemctl disable firewalld.service
--启用防火墙
firewall-cmd --zone=public --add-port=15400/tcp --permanent
firewall-cmd --zone=public --add-port=22/tcp --permanent
firewall-cmd --reload
--禁用防火墙区域偏移
sed -i 's/^AllowZoneDrifting=yes/AllowZoneDrifting=no/' /etc/firewalld/firewalld.conf
3.4、关闭selinux
sed -i "s/SELINUX=enforcing/SELINUX=disabled/g" /etc/selinux/config
setenforce 0
3.5、修改操作系统打开最大文件句柄数
cat >> /etc/security/limits.conf << "EOF"
#add by postgres
postgres soft nproc 65536
postgres hard nproc 65536
postgres soft nofile 65536
postgres hard nofile 65536
postgres soft stack 1024000
postgres hard stack 1024000
EOF
该配置在关闭linux访问终端session重新登录之后生效，ulimit -n的值会变成65535 。进行这一步操作的目的是防止linux操作系统内打开文件句柄数量的限制，避免不必要的故障。
3.6、修改磁盘调度
echo deadline > /sys/block/sda/queue/scheduler
3.7、修改磁盘预读
/sbin/blockdev --setra 8192 /dev/sda
3.8、查看磁盘预读
/sbin/blockdev --getra /dev/sda
3.9、设置系统内核参数
cp /etc/sysctl.conf /etc/sysctl.confbak
cat >> /etc/sysctl.conf <3.10、关闭进程间通信
#CentOS openEuler操作系统默认为关闭，可以跳过该步骤
sed -i 's/#RemoveIPC=no/RemoveIPC=no/g' /etc/systemd/logind.conf
systemctl daemon-reload
systemctl restart systemd-logind
四、安装数据库软件
cd /opt
rpm -ivh *.rpm
*会自动处理rpm安装顺序
rpm安装方式会自动创建postgres用户
二进制文件位置：/usr/pgsql-14/bin
五、创建数据目录(可选)
如果采用默认数据目录，该步骤忽略
mkdir -p /pgdata
chown -R postgres:postgres /pgdata
chmod -R 755 /pgdata
六、初始化实例
- 默认初始化实例数据目录位置：/var/lib/pgsql/14/data/
cd /usr/pgsql-14/bin
./initdb
- 如果自定义数据目录位置：
--username=postgres \
-D /pgdata \
--encoding=UTF8 \
--lc-collate=en_US.UTF-8 --lc-ctype=en_US.UTF-8
参数说明：
--lc-collate： 字符串排序的顺序
--lc-ctype：字符分类
七、启停
7.1.方式1：系统服务
开机自启系统服务文件位置：/usr/lib/systemd/system/postgresql-14.service
- 默认初始化实例数据目录位置
systemctl start postgresql-14.service
systemctl status postgresql-14.service
- 自定义数据目录初始化实例
--1.更改开机自启系统服务文件中数据目录位置
vi /usr/lib/systemd/system/postgresql-14.service
Environment=PGDATA=/var/lib/pgsql/14/data/ 替换为自定义数据目录
--2.启动
systemctl start postgresql-14.service
systemctl status postgresql-14.service
7.2、方式2：命令
--启动命令
pg_ctl start -D /var/lib/pgsql/14/data/
--重启命令
pg_ctl restart -D /var/lib/pgsql/14/data/
--查看数据库运行状态
pg_ctl status -D /var/lib/pgsql/14/data/
--停止数据库
pg_ctl stop -D /var/lib/pgsql/14/data/
八、配置环境变量
echo "##postgres user env configuration" >> /var/lib/pgsql/.bash_profile
cp /var/lib/pgsql/.bash_profile /var/lib/pgsql/.bash_profile
sed -i 's/^export PATH/#export PATH/' /var/lib/pgsql/.bash_profile
echo "#add by postgres" >> /var/lib/pgsql/.bash_profile
echo 'export PGHOME=/usr/pgsql-14' >> /var/lib/pgsql/.bash_profile
echo 'export PGPORT=5432' >> /var/lib/pgsql/.bash_profile
echo 'export PATH=$PGHOME/bin:$PATH' >> /var/lib/pgsql/.bash_profile
echo 'export MANPATH=$PGHOME/share/man:$MANPATH' >> /var/lib/pgsql/.bash_profile
echo 'export LD_LIBRARY_PATH=$PGHOME/lib:$LD_LIBRARY_PATH' >> /var/lib/pgsql/.bash_profile
echo 'export LANG="en_US.UTF-8"' >> /var/lib/pgsql/.bash_profile
echo 'export DATE=`date +"%Y%m%d%H%M"`' >> /var/lib/pgsql/.bash_profile
source /var/lib/pgsql/.bash_profile
九、参数配置
配置文件：
位置：数据目录PGDATA目录
postgresql.conf --数据库参数
pg_hba.conf --用户访问权限文件
9.1、数据库参数配置(含归档配置)
--创建归档目录
mkdir -p /var/lib/pgsql/14/pg_archive
--更改配置文件
cd $PGDATA
cp postgresql.conf postgresql.confbak
sed -i "/^#listen_addresses = 'localhost'/s/#listen_addresses = 'localhost'/listen_addresses = '*'/" postgresql.conf
sed -i "s/^#port = 5432/port = 5432/" postgresql.conf
sed -i 's/max_connections = 100/max_connections = 500/' postgresql.conf
sed -i "/^#wal_level/s/^#//" postgresql.conf #去掉注释
sed -i 's/#archive_mode = off/archive_mode = on/' postgresql.conf
sed -i "/^#archive_command = ''/s/#archive_command = ''/archive_command ='\/usr\/bin\/lz4 -q -z %p \/var\/lib\/pgsql\/14\/pg_archive/%f.lz4'/" postgresql.conf #-q取消警告-z强制压缩
sed -i "/^#log_destination = 'stderr'/s/#log_destination = 'stderr'/log_destination = 'csvlog'/" postgresql.conf
sed -i "/^#logging_collector = off/s/#logging_collector = off/logging_collector = on/" postgresql.conf
sed -i "/^#log_directory = 'log'/s/^#//" postgresql.conf #去掉注释
sed -i "/^#log_filename/s/^#//" postgresql.conf #去掉注释
sed -i "/^#log_file_mode/s/^#//" postgresql.conf #去掉注释
sed -i "/^#log_rotation_age/s/^#//" postgresql.conf #去掉注释
sed -i "/^#log_rotation_size/s/^#//" postgresql.conf #去掉注释
sed -i "/^shared_buffers = 128MB/s/shared_buffers = 128MB/shared_buffers = 1024MB/" postgresql.conf #物理内存25~40%
sed -i "/^#work_mem = 4MB/s/#work_mem = 4MB/work_mem = 30MB/" postgresql.conf
sed -i "/^#maintenance_work_mem = 64MB/s/#maintenance_work_mem = 64MB/maintenance_work_mem = 256MB/" postgresql.conf
sed -i "/^#temp_buffers = 8MB/s/#temp_buffers = 8MB/temp_buffers = 256MB/" postgresql.conf
数据库能够接受的最大请求连接并发数
max_connections = 100
数据库服务器将使用的共享内存缓冲区量。建议值：数据库独立服务器的1/4内存。
shared_buffers =1GB
9.2、用户访问权限配置
cd $PGDATA
cp pg_hba.conf pg_hba.confbak
cat > pg_hba.conf << EOF
# TYPE DATABASE USER ADDRESS METHOD
local all all trust
host all all 0.0.0.0/0 md5
EOF
第一行的内容表示local本机，all所有用户可以访问postgre的所有数据库，并且密码发送方式不需要加密(trust)。
第二行的内容用于远程访问，指定了可以访问postgreSql数据库的远程用户的ip范围， 0.0.0.0/0 表示所有ip都可以。如果你希望指定ip段，可以像这样去配置192.168.3.1/24(表示的ip范围是：192.168.3.1到192.168.3.255)。md5表示数据库访问密码使用md5的加密方式发送。
十、初始化数据环境
视情况执行如下脚本
--初始化postgres用户密码
alter user postgres with password '你设置的密码';
--创建新用户
create user top_sjjs with encrypted password 'top_sjjs';
alter user top_sjjs with superuser;
--创建数据库
create database mix_db owner top_sjjs;
grant all privileges on database mix_db to top_sjjs;
grant all privileges on all tables in schema public to top_sjjs;
--创建程序用户，用于操作数据库表里面的数据，完成增删改查
create user top_sjjs with encrypted password 'top_sjjs';
GRANT update,delete,insert,select ON ALL TABLES IN SCHEMA public TO top_sjjs;
八、启停数据库
九、开机自启动
为了让PostgreSQL在以后每次服务器重启之后，都能够自动启动，写一个自启动配置文件。下面的命令需要使用root用户执行
十、参数优化（可选）
包含配置归档参数，默认开启归档。
10.1.参数配置
--更改配置文件
cp /pgdb/data/postgresql.conf /pgdb/data/postgresql.confbak
sed -i "/^#listen_addresses = 'localhost'/s/#listen_addresses = 'localhost'/listen_addresses = '*'/" /pgdb/data/postgresql.conf
sed -i "s/^#port = 5432/port = 5432/" /pgdb/data/postgresql.conf
sed -i 's/max_connections = 100/max_connections = 500/' /pgdb/data/postgresql.conf
sed -i "/^#wal_level/s/^#//" /pgdb/data/postgresql.conf #去掉注释
sed -i 's/#archive_mode = off/archive_mode = on/' /pgdb/data/postgresql.conf
sed -i "/^#archive_command = ''/s/#archive_command = ''/archive_command ='\/usr\/bin\/lz4 -q -z %p \/pgdb\/pg_archive\/%f.lz4'/" /pgdb/data/postgresql.conf #-q取消警告-z强制压缩
sed -i "/^#log_destination = 'stderr'/s/#log_destination = 'stderr'/log_destination = 'csvlog'/" /pgdb/data/postgresql.conf
sed -i "/^#logging_collector = off/s/#logging_collector = off/logging_collector = on/" /pgdb/data/postgresql.conf
sed -i "/^#log_directory = 'log'/s/^#//" /pgdb/data/postgresql.conf #去掉注释
sed -i "/^#log_filename/s/^#//" /pgdb/data/postgresql.conf #去掉注释
sed -i "/^#log_file_mode/s/^#//" /pgdb/data/postgresql.conf #去掉注释
sed -i "/^#log_rotation_age/s/^#//" /pgdb/data/postgresql.conf #去掉注释
sed -i "/^#log_rotation_size/s/^#//" /pgdb/data/postgresql.conf #去掉注释
sed -i "/^shared_buffers = 128MB/s/shared_buffers = 128MB/shared_buffers = 1024MB/" /pgdb/data/postgresql.conf #物理内存25~40%
sed -i "/^#work_mem = 4MB/s/#work_mem = 4MB/work_mem = 30MB/" /pgdb/data/postgresql.conf
sed -i "/^#maintenance_work_mem = 64MB/s/#maintenance_work_mem = 64MB/maintenance_work_mem = 256MB/" /pgdb/data/postgresql.conf
sed -i "/^#temp_buffers = 8MB/s/#temp_buffers = 8MB/temp_buffers = 256MB/" /pgdb/data/postgresql.conf
--重启数据库
systemctl restart postgres.service
10.2.手动切归档
/pgdb/pgsql/bin/psql -Upostgres -W -d postgres -h127.0.0.1 -p5432 -c "select pg_switch_wal();"
10.3.归档定期删除策略
cat >> /var/spool/cron/postgres << "EOF"
# PostgresBegin
#设置归档策略:每晚零点10分删除7天前归档文件，视情况更改成1个月
10 00 * * * find /var/lib/pgsql/14/pg_archive -type f -name "0000000*" -mtime +7 -exec rm {} \; > /dev/null 2>&1
#设置日志保留2天，视情况更改成半年或3个月
00 01 * * * find /server/data/pgdb/data/log -type f -name "postgresql*.log" -mtime +7 -exec rm {} \; > /dev/null 2>&1
00 01 * * * find /server/data/pgdb/data/log -type f -name "postgresql*.csv" -mtime +7 -exec rm {} \; > /dev/null 2>&1
EOF
11.常见问题
1.安装报错
--问题描述
[root@localhost opt]# ls -l
total 8064
-rw-r--r--. 1 root root 1563508 Oct 22 09:09 postgresql14-14.8-1PGDG.rhel7.x86_64.rpm
-rw-r--r--. 1 root root 704024 Oct 22 09:03 postgresql14-contrib-14.8-1PGDG.rhel7.x86_64.rpm
-rw-r--r--. 1 root root 277080 Oct 22 09:03 postgresql14-libs-14.8-1PGDG.rhel7.x86_64.rpm
-rw-r--r--. 1 root root 5707012 Oct 22 09:03 postgresql14-server-14.8-1PGDG.rhel7.x86_64.rpm
[root@localhost opt]# rpm -ivh *.rpm
warning: postgresql14-14.8-1PGDG.rhel7.x86_64.rpm: Header V4 DSA/SHA1 Signature, key ID 442df0f8: NOKEY
error: Failed dependencies:
libicu is needed by postgresql14-14.8-1PGDG.rhel7.x86_64
libperl.so()(64bit) is needed by postgresql14-contrib-14.8-1PGDG.rhel7.x86_64
libpython3.6m.so.1.0()(64bit) is needed by postgresql14-contrib-14.8-1PGDG.rhel7.x86_64
libicui18n.so.50()(64bit) is needed by postgresql14-server-14.8-1PGDG.rhel7.x86_64
libicuuc.so.50()(64bit) is needed by postgresql14-server-14.8-1PGDG.rhel7.x86_64
--解决办法：
yum install libxslt libicu python36-libs python2-libs libperl.so
2.编译报错
问题1：
configure: error: could not determine flags for linking embedded Perl.
This probably means that ExtUtils::Embed or ExtUtils::MakeMaker is not
installed.
安装：yum install perl-ExtUtils-Embed
问题2：
configure: error: OpenSSL Crypto library not found
安装：yum -y install openssl-devel
问题3：
configure: error: could not determine flags for linking embedded Perl.
This probably means that ExtUtils::Embed or ExtUtils::MakeMaker is not
installed.
解决方法：
yum install perl-ExtUtils-Embed
问题4：
configure: error: readline library not found
If you have readline already installed, see config.log for details on the
failure. It is possible the compiler isn't looking in the proper directory.
Use --without-readline to disable readline support.
解决方法：
yum install readline readline-devel
问题5：
checking for inflate in -lz... no
configure: error: zlib library not found
If you have zlib already installed, see config.log for details on the
failure. It is possible the compiler isn't looking in the proper directory.
Use --without-zlib to disable zlib support.
解决方法：
yum install zlib zlib-devel
问题6：
checking for CRYPTO_new_ex_data in -lcrypto... no
configure: error: library 'crypto' is required for OpenSSL
解决方法：
yum install openssl openssl-devel
问题7：
checking for pam_start in -lpam... no
configure: error: library 'pam' is required for PAM
解决方法：
yum install pam pam-devel
问题8：
checking for xmlSaveToBuffer in -lxml2... no
configure: error: library 'xml2' (version >= 2.6.23) is required for XML support
解决方法：
yum install libxml2 libxml2-devel
问题9：
checking for xsltCleanupGlobals in -lxslt... no
configure: error: library 'xslt' is required for XSLT support
解决方法：
yum install libxslt libxslt-devel
问题10：
configure: error: Tcl shell not found
解决方法：
yum install tcl tcl-devel
问题11：
checking for ldap.h... no
configure: error: header file is required for LDAP
解决方法：
yum install openldap openldap-devel
问题12：
checking for Python.h... no
configure: error: header file is required for Python
解决方法：
yum install python python-devel
问题13：
Error when bootstrapping CMake:
Cannot find appropriate C++ compiler on this system.
Please specify one using environment variable CXX.
See cmake_bootstrap.log for compilers attempted.
解决方法：
yum install gcc-c++
3.启动报错"max_stack_depth" must not exceed 7680kB
--报错：
[root@top132:/pgdb/data]$ systemctl start postgres
Job for postgres.service failed because the control process exited with error code. See "systemctl status postgres.service" and "journalctl -xe" for details.
[root@top132:/pgdb/data]$ journalctl -xe
Oct 09 04:12:48 top132 systemd[1]: Configuration file /usr/lib/systemd/system/postgres.service is marked executable. Please remove executable permission bits. Proceeding anyway.
Oct 09 04:12:56 top132 oracledb_exporter[29984]: ts=2023-10-09T08:12:56.802Z caller=collector.go:262 level=error Errorpingingoracle:="missing port in address"
Oct 09 04:13:11 top132 oracledb_exporter[29984]: ts=2023-10-09T08:13:11.805Z caller=collector.go:262 level=error Errorpingingoracle:="missing port in address"
Oct 09 04:13:26 top132 oracledb_exporter[29984]: ts=2023-10-09T08:13:26.803Z caller=collector.go:262 level=error Errorpingingoracle:="missing port in address"
Oct 09 04:13:41 top132 oracledb_exporter[29984]: ts=2023-10-09T08:13:41.806Z caller=collector.go:262 level=error Errorpingingoracle:="missing port in address"
Oct 09 04:13:56 top132 oracledb_exporter[29984]: ts=2023-10-09T08:13:56.802Z caller=collector.go:262 level=error Errorpingingoracle:="missing port in address"
Oct 09 04:14:04 top132 polkitd[727]: Registered Authentication Agent for unix-process:9141:161465164 (system bus name :1.6876 [/usr/bin/pkttyagent --notify-fd 5 --fallback], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, loca
Oct 09 04:14:04 top132 systemd[1]: Starting PostgreSQL database server...
-- Subject: Unit postgres.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit postgres.service has begun starting up.
Oct 09 04:14:04 top132 pg_ctl[9147]: waiting for server to start....2023-10-09 08:14:04.952 GMT [9151] LOG: invalid value for parameter "max_stack_depth": 8192
Oct 09 04:14:04 top132 pg_ctl[9147]: 2023-10-09 08:14:04.952 GMT [9151] DETAIL: "max_stack_depth" must not exceed 7680kB.
Oct 09 04:14:04 top132 pg_ctl[9147]: 2023-10-09 08:14:04.952 GMT [9151] HINT: Increase the platform's stack depth limit via "ulimit -s" or local equivalent.
Oct 09 04:14:04 top132 pg_ctl[9147]: 2023-10-09 04:14:04.953 EDT [9151] FATAL: configuration file "/pgdb/data/postgresql.conf" contains errors
Oct 09 04:14:05 top132 pg_ctl[9147]: stopped waiting
Oct 09 04:14:05 top132 pg_ctl[9147]: pg_ctl: could not start server
Oct 09 04:14:05 top132 pg_ctl[9147]: Examine the log output.
Oct 09 04:14:05 top132 systemd[1]: postgres.service: control process exited, code=exited status=1
--解决办法