Linux进程与线程的内核实现

进程描述符task_struct

  • 进程描述符(struct task_struct)
  • pid与tgid
  • 进程id编号分配规则
  • 内存管理mm_struct
  • 进程与文件,文件系统

进程,线程创建的本质

  • clone函数原型
  • 线程创建的实现
  • 进程创建的实现

总结

进程描述符task_struct

进程描述符(struct task_struct)

task_struct称为进程描述符结构,该结构定义在文件中。进程描述符中包含一个具体进程的所有信息
进程描述符中包含的数据能完整地描述一个正在执行的程序:它打开的文件,进程的地址空间,挂起的信号,进程的状态等

struct task_struct {
	volatile long state;	/* -1 unrunnable, 0 runnable, >0 stopped */
	void *stack;
	atomic_t usage;
	unsigned int flags;	/* per process flags, defined below */
	unsigned int ptrace;

#ifdef CONFIG_SMP
	struct llist_node wake_entry;
	int on_cpu;
#endif
	int on_rq;

	int prio, static_prio, normal_prio;
	unsigned int rt_priority;
	const struct sched_class *sched_class;
	struct sched_entity se;
	struct sched_rt_entity rt;
#ifdef CONFIG_CGROUP_SCHED
	struct task_group *sched_task_group;
#endif

#ifdef CONFIG_PREEMPT_NOTIFIERS
	/* list of struct preempt_notifier: */
	struct hlist_head preempt_notifiers;
#endif

	/*
	 * fpu_counter contains the number of consecutive context switches
	 * that the FPU is used. If this is over a threshold, the lazy fpu
	 * saving becomes unlazy to save the trap. This is an unsigned char
	 * so that after 256 times the counter wraps and the behavior turns
	 * lazy again; this to deal with bursty apps that only use FPU for
	 * a short time
	 */
	unsigned char fpu_counter;
#ifdef CONFIG_BLK_DEV_IO_TRACE
	unsigned int btrace_seq;
#endif

	unsigned int policy;
	cpumask_t cpus_allowed;

#ifdef CONFIG_PREEMPT_RCU
	int rcu_read_lock_nesting;
	char rcu_read_unlock_special;
	struct list_head rcu_node_entry;
#endif /* #ifdef CONFIG_PREEMPT_RCU */
#ifdef CONFIG_TREE_PREEMPT_RCU
	struct rcu_node *rcu_blocked_node;
#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
#ifdef CONFIG_RCU_BOOST
	struct rt_mutex *rcu_boost_mutex;
#endif /* #ifdef CONFIG_RCU_BOOST */

#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
	struct sched_info sched_info;
#endif

	struct list_head tasks;
#ifdef CONFIG_SMP
	struct plist_node pushable_tasks;
#endif

	struct mm_struct *mm, *active_mm;
#ifdef CONFIG_COMPAT_BRK
	unsigned brk_randomized:1;
#endif
#if defined(SPLIT_RSS_COUNTING)
	struct task_rss_stat	rss_stat;
#endif
/* task state */
	int exit_state;
	int exit_code, exit_signal;
	int pdeath_signal;  /*  The signal sent when the parent dies  */
	unsigned int jobctl;	/* JOBCTL_*, siglock protected */
	/* ??? */
	unsigned int personality;
	unsigned did_exec:1;
	unsigned in_execve:1;	/* Tell the LSMs that the process is doing an
				 * execve */
	unsigned in_iowait:1;


	/* Revert to default priority/policy when forking */
	unsigned sched_reset_on_fork:1;
	unsigned sched_contributes_to_load:1;

#ifdef CONFIG_GENERIC_HARDIRQS
	/* IRQ handler threads */
	unsigned irq_thread:1;
#endif

	pid_t pid;
	pid_t tgid;

#ifdef CONFIG_CC_STACKPROTECTOR
	/* Canary value for the -fstack-protector gcc feature */
	unsigned long stack_canary;
#endif

	/* 
	 * pointers to (original) parent process, youngest child, younger sibling,
	 * older sibling, respectively.  (p->father can be replaced with 
	 * p->real_parent->pid)
	 */
	struct task_struct __rcu *real_parent; /* real parent process */
	struct task_struct __rcu *parent; /* recipient of SIGCHLD, wait4() reports */
	/*
	 * children/sibling forms the list of my natural children
	 */
	struct list_head children;	/* list of my children */
	struct list_head sibling;	/* linkage in my parent's children list */
	struct task_struct *group_leader;	/* threadgroup leader */

	/*
	 * ptraced is the list of tasks this task is using ptrace on.
	 * This includes both natural children and PTRACE_ATTACH targets.
	 * p->ptrace_entry is p's link on the p->parent->ptraced list.
	 */
	struct list_head ptraced;
	struct list_head ptrace_entry;

	/* PID/PID hash table linkage. */
	struct pid_link pids[PIDTYPE_MAX];
	struct list_head thread_group;

	struct completion *vfork_done;		/* for vfork() */
	int __user *set_child_tid;		/* CLONE_CHILD_SETTID */
	int __user *clear_child_tid;		/* CLONE_CHILD_CLEARTID */

	cputime_t utime, stime, utimescaled, stimescaled;
	cputime_t gtime;
#ifndef CONFIG_VIRT_CPU_ACCOUNTING
	cputime_t prev_utime, prev_stime;
#endif
	unsigned long nvcsw, nivcsw; /* context switch counts */
	struct timespec start_time; 		/* monotonic time */
	struct timespec real_start_time;	/* boot based time */
/* mm fault and swap info: this can arguably be seen as either mm-specific or thread-specific */
	unsigned long min_flt, maj_flt;

	struct task_cputime cputime_expires;
	struct list_head cpu_timers[3];

/* process credentials */
	const struct cred __rcu *real_cred; /* objective and real subjective task
					 * credentials (COW) */
	const struct cred __rcu *cred;	/* effective (overridable) subjective task
					 * credentials (COW) */
	struct cred *replacement_session_keyring; /* for KEYCTL_SESSION_TO_PARENT */

	char comm[TASK_COMM_LEN]; /* executable name excluding path
				     - access with [gs]et_task_comm (which lock
				       it with task_lock())
				     - initialized normally by setup_new_exec */
/* file system info */
	int link_count, total_link_count;
#ifdef CONFIG_SYSVIPC
/* ipc stuff */
	struct sysv_sem sysvsem;
#endif
#ifdef CONFIG_DETECT_HUNG_TASK
/* hung task detection */
	unsigned long last_switch_count;
#endif
/* CPU-specific state of this task */
	struct thread_struct thread;
/* filesystem information */
	struct fs_struct *fs;
/* open file information */
	struct files_struct *files;
/* namespaces */
	struct nsproxy *nsproxy;
/* signal handlers */
	struct signal_struct *signal;
	struct sighand_struct *sighand;

	sigset_t blocked, real_blocked;
	sigset_t saved_sigmask;	/* restored if set_restore_sigmask() was used */
	struct sigpending pending;

	unsigned long sas_ss_sp;
	size_t sas_ss_size;
	int (*notifier)(void *priv);
	void *notifier_data;
	sigset_t *notifier_mask;
	struct audit_context *audit_context;
#ifdef CONFIG_AUDITSYSCALL
	uid_t loginuid;
	unsigned int sessionid;
#endif
	seccomp_t seccomp;

/* Thread group tracking */
   	u32 parent_exec_id;
   	u32 self_exec_id;
/* Protection of (de-)allocation: mm, files, fs, tty, keyrings, mems_allowed,
 * mempolicy */
	spinlock_t alloc_lock;

	/* Protection of the PI data structures: */
	raw_spinlock_t pi_lock;

#ifdef CONFIG_RT_MUTEXES
	/* PI waiters blocked on a rt_mutex held by this task */
	struct plist_head pi_waiters;
	/* Deadlock detection and priority inheritance handling */
	struct rt_mutex_waiter *pi_blocked_on;
#endif

#ifdef CONFIG_DEBUG_MUTEXES
	/* mutex deadlock detection */
	struct mutex_waiter *blocked_on;
#endif
#ifdef CONFIG_TRACE_IRQFLAGS
	unsigned int irq_events;
	unsigned long hardirq_enable_ip;
	unsigned long hardirq_disable_ip;
	unsigned int hardirq_enable_event;
	unsigned int hardirq_disable_event;
	int hardirqs_enabled;
	int hardirq_context;
	unsigned long softirq_disable_ip;
	unsigned long softirq_enable_ip;
	unsigned int softirq_disable_event;
	unsigned int softirq_enable_event;
	int softirqs_enabled;
	int softirq_context;
#endif
#ifdef CONFIG_LOCKDEP
# define MAX_LOCK_DEPTH 48UL
	u64 curr_chain_key;
	int lockdep_depth;
	unsigned int lockdep_recursion;
	struct held_lock held_locks[MAX_LOCK_DEPTH];
	gfp_t lockdep_reclaim_gfp;
#endif

/* journalling filesystem info */
	void *journal_info;

/* stacked block device info */
	struct bio_list *bio_list;

#ifdef CONFIG_BLOCK
/* stack plugging */
	struct blk_plug *plug;
#endif

/* VM state */
	struct reclaim_state *reclaim_state;

	struct backing_dev_info *backing_dev_info;

	struct io_context *io_context;

	unsigned long ptrace_message;
	siginfo_t *last_siginfo; /* For ptrace use.  */
	struct task_io_accounting ioac;
#if defined(CONFIG_TASK_XACCT)
	u64 acct_rss_mem1;	/* accumulated rss usage */
	u64 acct_vm_mem1;	/* accumulated virtual memory usage */
	cputime_t acct_timexpd;	/* stime + utime since last update */
#endif
#ifdef CONFIG_CPUSETS
	nodemask_t mems_allowed;	/* Protected by alloc_lock */
	seqcount_t mems_allowed_seq;	/* Seqence no to catch updates */
	int cpuset_mem_spread_rotor;
	int cpuset_slab_spread_rotor;
#endif
#ifdef CONFIG_CGROUPS
	/* Control Group info protected by css_set_lock */
	struct css_set __rcu *cgroups;
	/* cg_list protected by css_set_lock and tsk->alloc_lock */
	struct list_head cg_list;
#endif
#ifdef CONFIG_FUTEX
	struct robust_list_head __user *robust_list;
#ifdef CONFIG_COMPAT
	struct compat_robust_list_head __user *compat_robust_list;
#endif
	struct list_head pi_state_list;
	struct futex_pi_state *pi_state_cache;
#endif
#ifdef CONFIG_PERF_EVENTS
	struct perf_event_context *perf_event_ctxp[perf_nr_task_contexts];
	struct mutex perf_event_mutex;
	struct list_head perf_event_list;
#endif
#ifdef CONFIG_NUMA
	struct mempolicy *mempolicy;	/* Protected by alloc_lock */
	short il_next;
	short pref_node_fork;
#endif
	struct rcu_head rcu;

	/*
	 * cache last used pipe for splice
	 */
	struct pipe_inode_info *splice_pipe;
#ifdef	CONFIG_TASK_DELAY_ACCT
	struct task_delay_info *delays;
#endif
#ifdef CONFIG_FAULT_INJECTION
	int make_it_fail;
#endif
	/*
	 * when (nr_dirtied >= nr_dirtied_pause), it's time to call
	 * balance_dirty_pages() for some dirty throttling pause
	 */
	int nr_dirtied;
	int nr_dirtied_pause;
	unsigned long dirty_paused_when; /* start of a write-and-pause period */

#ifdef CONFIG_LATENCYTOP
	int latency_record_count;
	struct latency_record latency_record[LT_SAVECOUNT];
#endif
	/*
	 * time slack values; these are used to round up poll() and
	 * select() etc timeout values. These are in nanoseconds.
	 */
	unsigned long timer_slack_ns;
	unsigned long default_timer_slack_ns;

	struct list_head	*scm_work_list;
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
	/* Index of current stored address in ret_stack */
	int curr_ret_stack;
	/* Stack of return addresses for return function tracing */
	struct ftrace_ret_stack	*ret_stack;
	/* time stamp for last schedule */
	unsigned long long ftrace_timestamp;
	/*
	 * Number of functions that haven't been traced
	 * because of depth overrun.
	 */
	atomic_t trace_overrun;
	/* Pause for the tracing */
	atomic_t tracing_graph_pause;
#endif
#ifdef CONFIG_TRACING
	/* state flags for use by tracers */
	unsigned long trace;
	/* bitmask and counter of trace recursion */
	unsigned long trace_recursion;
#endif /* CONFIG_TRACING */
#ifdef CONFIG_CGROUP_MEM_RES_CTLR /* memcg uses this to do batch job */
	struct memcg_batch_info {
		int do_batch;	/* incremented when batch uncharge started */
		struct mem_cgroup *memcg; /* target memcg of uncharge */
		unsigned long nr_pages;	/* uncharged usage */
		unsigned long memsw_nr_pages; /* uncharged mem+swap usage */
	} memcg_batch;
#endif
#ifdef CONFIG_HAVE_HW_BREAKPOINT
	atomic_t ptrace_bp_refcnt;
#endif
};

pid与tgid

Linux进程与线程的内核实现_第1张图片

tgid全名thread group ID,一个内部有多线程的进程,进程中每个线程的id都不一样,但是对外表现出同一个进程整体

struct task_struct{
	pid_t pid;//进程的唯一标识
 	pid_t tgid;// 线程组的领头线程的pid成员的值
};

进程id编号分配规则

Linux 内核限制进程号需小于等于 32767。新进程创建时,内核会按顺序将下一个可用的进程号分配给其使用。每当进程号达到 32767 的限制时,内核将重置进程号计数器,以便从小整数开始分配。

一旦进程号达到 32767,会将进程号计数器重置为 300,而不是 1。之所以如此,是因为低数值的进程号为系统进程和守护进程所长期占用,在此范围内搜索尚未使用的进程号只会是浪费时间。

内存管理mm_struct

struct task_struct{
    struct mm_struct* mm;
}

每个进程都有自己独立的虚拟地址空间,使用mm_struct结构体来管理内存,这里的mm指针指向了mm_struct结构体,包含了内存资源的页表,内存映射等

 struct mm_struct{
     struct vm_area_struct* mmap;
     struct re_root mm_rb;
     //...
     pgd_t* pgd;  
 }

进程与文件,文件系统

task_struct与文件相关的字段最常用的下面这两个

struct task_struct{
    //文件系统的信息的指针,包含了进程运行的目录信息
    struct fs_struct* fs;
    
    //打开的文件描述符资源表
    struct files_struct* files;
}

进程,线程创建的本质

fork()和pthread_create()函数最后都会进入clone()系统调用

Linux进程与线程的内核实现_第2张图片

clone函数原型

  • fn:表示clone生成的子进程的起始调用函数,参数由第四个参数arg指定
  • stack:表示生成的子进程的栈空间
  • flags:关键参数,用于区分生成的子进程与父进程如何共享资源(内存,打开文件描述符等)
  • 剩下的参数与线程实现有关
int clone(int (*fn)(void *), 
          void *stack, 
          int flags, 
          void *arg, ...
                 /* pid_t *parent_tid, void *tls, pid_t *child_tid */ );

线程创建的实现pthread_create()

#include 
#include 
#include 
#include 
#include 

void* run(void* arg){

}

int main()
{
	pthread_t t1;
	pthread_create(&t1, 0, &run, 0);
	pthread_join(t1, 0);
	return 0;
}

此时clone系统调用的flags=CLONE_VM | CLONE_FS | CLONE_FILES | CLONE_SIGHAND | CLONE_THREAD | …

标志 含义
CLONE_VM 共享虚拟内存
CLONE_FS 共享文件与系统相关的属性
CLONE_FILES 共享打开的文件描述符
CLONE_SIGHAND 共享对信号的处置
CLONE_THREAD 置于父进程所属的线程组中

进程创建的实现fork()

#include 
#include 


int main()
{
	pid_t pid;
    pid = fork();
    if(pid == 0){
        //此处是子进程的代码分支
    }else if(pid > 0){
        //此处是父进程的代码分支
    }
	return 0;
}

此时clone系统调用的flags=CLONE_SIGCHLD | …

本质:不共享资源,使用cow,任何一个修改都会造成分裂

标志 含义
CLONE_SIGCHLD 接收子进程退出的信号

总结

  • fork()和pthread_create()创建进程或者线程都会调用clone()系统调用
  • pthread_create()调用clone()时传入的flags参数会设置共享虚拟内存,共享文件与系统相关的属性,共享打开的文件描述符,共享对信号的处置,置于父进程所属的线程组中
  • fork()调用clone()时传入的flags参数只会设置接收子进程退出的信号
  • 在内核态中没有进程和线程的概念,内核不会区分进程和线程的操作

你可能感兴趣的:(Linux,系统编程,linux,服务器,c语言,后端,操作系统,内核,进程)