gpio模拟spi读写寄存器示例代码

gpio模拟spi通信示例代码（海思HI3531DV200平台）

读的时候，写1个32位的地址，读1个32位的数据，地址的最高位是1 
写的时候，一个32位的地址，一个32位的数据，地址的最高位是0
收发顺序：高字节先

#include 
#include 
#include 
#include 
#include 
#include 
#include 

#define NCS      18                     //定义SS所对应的GPIO接口编号
#define SCLK     21                     //定义SCLK所对应的GPIO接口编号
#define MOSI     19                     //定义SCLK所对应的GPIO接口编号
#define MISO     20                    //定义MISO所对应的GPIO接口编号

#define  set_gpio_value gpio_set_value                                                                                          
#define  get_gpio_value gpio_get_value                                                                                             

static int gpio_set_value(int pin, int value)
{
    char cmd[128] = "";
    int fd = -1;
    sprintf(cmd, "/sys/class/gpio/gpio%d/value", pin);
    fd = open(cmd, O_RDWR);
    if(fd < 0)
    {
        printf("open gpio%d value fail\n", pin);
        return -1;
    }
    if(value)
    {
        write(fd, "1", strlen("1"));
    }
    else
    {
        write(fd, "0", strlen("0"));
    }

    close(fd);

    return 0;
}

static int gpio_get_value(int pin)
{
        char cmd[128] = "";
        int fd = -1;
        char value = 0;
        sprintf(cmd, "/sys/class/gpio/gpio%d/value", pin);
        fd = open(cmd, O_RDWR);
        if(fd < 0)
        {
                printf("open gpio%d value fail\n", pin);
                return -1;
        }

        read(fd, &value, 1);
        close(fd);

        if(value=='1')
        {
                return 1;
        }else
        {
                return 0;
        }
}          

static int gpio_direction_output(int pin, int value)                                                                                                           
{
        char cmd[128] = "";
        int fd = -1;
        sprintf(cmd, "/sys/class/gpio/gpio%d/direction", pin);
        fd = open(cmd, O_RDWR);
        if(fd < 0)
        {
                printf("open gpio%d value fail\n", pin);
                return -1;
        }
        write(fd, "out", strlen("out"));
        close(fd);

        memset(cmd, 0, sizeof(cmd));
        sprintf(cmd, "/sys/class/gpio/gpio%d/value", pin);
        fd = open(cmd, O_RDWR);
        if(fd < 0)
        {
                printf("open gpio%d value fail\n", pin);
                return -1;
        }
        if(value)
        {
                write(fd, "1", strlen("1"));
        }
        else
        {
                write(fd, "0", strlen("0"));
        }

        close(fd);

        return 0;
}

static int gpio_direction_input(int pin)
{
        char cmd[128] = "";
        int fd = -1;
        sprintf(cmd, "/sys/class/gpio/gpio%d/direction", pin);
        fd = open(cmd, O_RDWR);
        if(fd < 0)
        {
                printf("open gpio%d value fail\n", pin);
                return -1;
        }
        write(fd, "in", strlen("in"));
        close(fd);
}

static int udelay(int usec)
{
        return 0;
}

static int spi_request_gpio(void)                                                                                                      
{                                                                                                                                      
}
/* SPI端口初始化 */                                                                                                                    
static void spi_init(void)
{
    gpio_direction_output(NCS, 1);
    gpio_direction_output(SCLK, 0);
    gpio_direction_output(MOSI, 0);
    gpio_direction_input(MISO);
    set_gpio_value(SCLK, 0);
    set_gpio_value(MOSI, 0);
}

/*
从设备使能
enable：为1时，使能信号有效，SS低电平
为0时，使能信号无效，SS高电平                                                                                                  
*/                                                                                                                                     
void ss_enable(int enable)
{
    if (enable)
        set_gpio_value(NCS, 0);                  //SS低电平，从设备使能有效
    else
        set_gpio_value(NCS, 1);                  //SS高电平，从设备使能无效
}

/* SPI字节写 */
void spi_write_byte(unsigned char b)
{
    int i;
    for (i=7; i>=0; i--) {
        set_gpio_value(SCLK, 0);
        set_gpio_value(MOSI, b&(1<

#define strToHex(strBuf) strtoul(strBuf, NULL, 16)
#define strToDec(strBuf) strtoul(strBuf, NULL, 10)

int str_to_int(char *buf)
{
    if(('0'== buf[0])&&('x'== buf[1] || 'X'== buf[1]))
        return(strToHex(buf));
    else
        return(strToDec(buf));
}


//读的时候，写1个32位的地址，读1个32位的数据，地址的最高位是1 
//写的时候，一个32位的地址，一个32位的数据，地址的最高位是0
//收发顺序：高字节先
int main(int argc, char **argv)
{
    char buf[8] = {};
    int addr = 0;
    int value = 0;

    if(argc==2)
    {
        addr = str_to_int(argv[1]);
        buf[0] = (addr>>24)&0xff;
        buf[0] |= (1<<7); //最高位为1表示读操作
        buf[1] = (addr>>16)&0xff;
        buf[2] = (addr>>8)&0xff;
        buf[3] = addr&0xff;
            value = spi_read(buf, 4);
        printf("spi read addr:0x%08x, value:0x%08x\n", addr, value);
    }else if(argc==3)
    {
        addr = str_to_int(argv[1]);
        value = str_to_int(argv[2]);
        buf[0] = (addr>>24)&0xff;
        buf[0] &= ~(1<<7); //最高位为0表示读操作
        buf[1] = (addr>>16)&0xff;
        buf[2] = (addr>>8)&0xff;
        buf[3] = addr&0xff;
        buf[4] = (value>>24)&0xff;
        buf[5] = (value>>16)&0xff;
        buf[6] = (value>>8)&0xff;
        buf[7] = value&0xff;
        spi_write(buf, 8);
        printf("spi write addr:0x%08x, value:0x%08x\n", addr, value);
    }else
    {
        printf("usage:\r\n./gpiospi 0x12345678(read)\r\n./gpiospi 0x12345678 0x87654321(write)\r\n");
    }

    return 0;
}