华为路由器：AR1200真机忘记Console口密码的处理方法全过程演示

方法：在BootROM下引导菜单中清除密码

全过程演示：

Login authentication


Password:
Password:
Password:
  Please retry after 5 seconds.

Password:
  Please retry after 10 seconds.

Password:

  Configuration console exit, please retry to log on


Login authentication


Password:
  Please retry after 5 seconds.

Password:
  Password timeout expired
Password:

  Configuration console exit, please retry to log on


Login authentication


Password:
Password:
  Please retry after 5 seconds.

Password:
  Please retry after 10 seconds.

Password:
  Password timeout expired

  Configuration console exit, please retry to log on


Login authentication


Password:
  Password timeout expired
Password:
  Password timeout expired
Password:
  Password timeout expired

  Configuration console exit, please retry to log on


Login authentication


Password:
  Please retry after 5 seconds.

Password:
************************************************************ 
***                       HUAWEI AR.                     ***
***BOOT version:107 (Build time: Dec 26 2014 - 16:56:44) ***
************************************************************ 
Press ctrl+T for memory test  .... skip
Flash  : 16 MiB
USB    : 3 USB Device(s) found
       : 1 Storage Device(s) found
Net    : octeth0, octeth1, octeth2, octeth3

Press Ctrl+A for Bootrom menu ... 0
Now boot from flash:/AR1220F-V200R005C20SPC700.cc, please wait...
Check file :Boot .OK 
Check file :CPLD .OK 
Check file :cn6xxx_rootfs ....OK
Check file :cn6xxx_kernel ..OK
Check file :bootloaderfs .OK
Starting system ... OK 
Press Ctrl+B to break auto startup ... 1

Init menu password

V200R003C01以及更低版本的缺省密码是huawei
V200R005C00以及更高版本的缺省密码是Admin@huawei。

Enter Password:******
Enter Password:******
Enter Password:************
Default Password,Please Set New Password.
        BootLoader Menu

    1. Startup Select
    2. Network Menu
    3. File Manager
    4. Password Manager
    5. Reboot

Enter your choice(1-5):4  #密码管理
        PassWord Menu

    1. Modify the menu password
    2. Clear the console login password
    0. Return

Enter your choice(0-2):2  #清除console密码
Clear the console login password Succeed!

        PassWord Menu

    1. Modify the menu password
    2. Clear the console login password
    0. Return

Enter your choice(0-2):0   #返回
        BootLoader Menu

    1. Startup Select
    2. Network Menu
    3. File Manager
    4. Password Manager
    5. Reboot

：5  重启
Requesting system reboot
Restarting system.

************************************************************ 
***                       HUAWEI AR.                     ***
***BOOT version:107 (Build time: Dec 26 2014 - 16:56:44) ***
************************************************************ 
Press ctrl+T for memory test  .... skip
Flash  : 16 MiB
USB    : 3 USB Device(s) found
       : 1 Storage Device(s) found
................, octeth1, octeth2, octeth3

Press Ctrl+A for Bootrom menu ... 0
Now boot from flash:/AR1220F-V200R005C20SPC700.cc, please wait...
Check file :Boot .OK 
Check file :CPLD .OK 
Check file :cn6xxx_rootfs ....OK
Check file :cn6xxx_kernel ..OK
Check file :bootloaderfs .OK
Starting system ... OK 
Press Ctrl+B to break auto startup ... 0
Create monitor process
Create cap process
Create vrp process

Initializing SMI Bus:OK

Initializing I2C Bus:OK
Backup Bootrom : done 

DOPRA initialize..................OK
IAS initialize....................OK

VRP_SockTm_Init create............OK
VRP initialize
Create tasks......................OK
Initialize tasks..................OK
Recovering configuration..........OK



  Press any key to get started

<Huawei>