一 .LaTeX中定义新命令和环境
二 .字体设置
三.中文处理方法
四.源文件基本结构
五.特殊字符
六.数学公式的多行公式
七.数学公式初步
八.篇章结构
九.矩阵
十.浮动体
十一.插图
十二.参考文献BibTex
十三.表格
% 导言区
\documentclass{ctexart}%ctexbook, ctexrep
% \newcommand{cmd}{def}定义命令
% 命令只能由字母组成,不能以\end 开头
% \newcommand{命令}[参数个数][首字母默认值]{具体定义}
% \newcommand可以是简单字符串替代,例如:
% 使用\PRC 相当于 People's Republic of \emph{China} 这一串内容
\newcommand\PRC{People's Republic of \emph{China}}%\emph{text}表示强调
% \newcommand也可以使用参数
% 参数个数可以从1到9,使用时用 #1,#2,……,#9 表示
\newcommand\loves[2]{#1 喜欢 #2}
\newcommand\hatedby[2]{#2 不受 #1 喜欢}
% \newcommand的参数也可以有默认值
% 指定参数个数的同时指定了首个参数的默认值,那么这个命令的
% 第一个参数就成为可选的参数(要使用中括号指定)
\newcommand\love[3][喜欢]{#2#1#3}
% \renewcommand-重定义命令
% 与\newcommand 命令作用和用法相同,但只能用于已有命令
% \renewcommand{cmd}[args][default]{def}
\renewcommand\abstractname{内容简介}
% 定义和重定义环境
% \newenvironment{name}[args][default]{begdef}{enddef}
% \renewenvironment{name}[args][default]{begdef}{enddef}
% 为 book 类中定义摘要(abstract) 环境
\newenvironment{myabstract}[1][摘要]%
{\small
\begin{center}\bfseries #1\end{center}%
\begin{quotation}}%
{
\end{quotation}
}
% 正文区(文稿区)
\begin{document}
\PRC
\loves{猫儿}{鱼}
\hatedby{猫儿}{萝卜}
\love{猫儿}{鱼}
\love[最爱]{猫儿}{鱼}
\begin{abstract}
这是一段摘要...
\end{abstract}
\begin{myabstract}[我的摘要]
这是一段自定义格式的摘要...
\end{myabstract}
\end{document}
在LATEX中,一个字体有5种属性:
- 字体编码
- 正文字体编码:OT1、T1、EU1等
- 数学字体编吗: OML、OMS、OMX等
- 字体族
- 罗马字体:笔画起始处有装饰
- 无衬线字体:笔画起始处无装饰
- 打字机字体:每个字符宽度相同,又称等宽字体
- 字体系列
- 粗细
- 宽度
- 字体形状
- 直立
- 斜体
- 伪斜体
- 小型大写
- 字体大小
%导言区
\documentclass{article}
\usepackage{ctex}
\newcommand{\myfont}{\textit{\textbf{\textsf{Fancy Text}}}}
%正文区(文稿区)
\begin{document}
%字体族设置(罗马字体、无衬线字体、打字机字体)
\textrm{Roman Family} \textsf{Sans Serif Family} \texttt{Typewriter Family}
{\rmfamily Roman Family} {\sffamily Sans Serif Family} {\ttfamily Typewriter Family}
{\sffamily who you are?you find self on everyone around. take you as the same as others!}
{\ttfamily Are you wiser than others? definitely no.in some ways, may it is true.What can you achieve? a luxurious house?a brillilant car? an admirable career?who knows?}
%字体系列设置(粗细、宽度)
\textmd{Medium Series} \textbf{Boldface Series}
{\mdseries Medium Series} {\bfseries Boldface Series}
%字体形状(直立、斜体、伪斜体、小型大写)
\textup{Upright Shape} \text it{Italic Shape}
\textsl{Slanted Shape} \textsc{Small Caps Shape}
{\upshape Upright Shape} {\itshape Italic Shape} {\slshape Slanted Shape} {\scshape Small Caps Shape}
%中文字体
{\songti 宋体} \quad {\heiti 黑体} \quad {\fangsong 仿宋} \quad {\kaishu 楷书}
中文字体的\textbf{粗体}与\textit{斜体}
%字体大小
{\tiny Hello}\\
{\scriptsize Hello}\\
{\footnotesize Hello}\\
{\small Hello}\\
{\normalsize Hello}\\
{\large Hello}\\
{\Large Hello}\\
{\LARGE Hello}\\
{\huge Hello}\\
{\Huge Hello}\\
%中文字号设置命令
\zihao{-0} 你好!
\myfont
\end{document}
%导言区
\documentclass{ctexart}%ctexbook, ctexrep
%usepackage(ctex)
\newcommand\degree{^\circ}
\ title{\heiti 杂谈勾股定理}
\author{\kaishu 张三}
\date{\today}
%正文区(文稿区)
\begin{document}
\maketitle
Hello World!
%here is my big formula
Let $f(x)$ be defined by the formula
$f(x)=3x^2+x-1$.
$$f(x)=3x^2+x-1$$
which is a polynomial of degree 2.
设直角$\angel C=90\degree$
\begin{equation}
AB^2 =BC^2 + AC^2.
\end{equation}
%texdoc ctex
%texdoc lshort-zh
\end{document}
%导言区
\documentclass{article}%book, report, letter
\ title{My First Document}
\author{Nan Geng}
\date{\today}
%正文区(文稿区)
\begin{document}
\maketitle
Hello World!
%here is my big formula
Let $f(x)$ be defined by the formula
$f(x)=3x^2+x-1$.
$$f(x)=3x^2+x-1$$
which is a polynomial of degree 2.
\end{document}
%导言区
\documentclass{article}
\usepackage{ctex}
%正文区(文稿区)
\begin{document}
\section{空白符号}
%空行分段,多个空行等同1个
%自动缩进,绝对不能使用空格代替
%英文中多个空格处理为1个空格,中文中空格将被忽略
%汉字与其它字符的间距会自动由XeLaTex处理
%禁止使用中文全角空格( \quad产生一个rem的空白,\qquad产生2rem的空白, \thinspace产生1\\6个em空白 ,\enspace产生0.5em个空白,\ 命令输出一个空格,~命令产生一个硬空格)
%1pc=12pt=4.218mm
a\kern 1pc b
a\kern -1em b
a\hskip 1em b
a\hspace{35pt}b
%占位宽度
a\hphantom{xyz}b
%弹性长度
a\hfill b
\section{\LaTex 控制符}
\# \$ \% \{\} \~{} \_{} \^{} \textbackslash \&
\section{排版符号}
\S \P \dag \ddag \copyright \pounds
\section{\Tex 标志符号}
\TeX{} \LaTeX{} \LaTeXe{}
\section{引号}
`' `` ''
\section{连字符}
- -- ---
\section{非英文字符}
\oe \OE \ae \AE \aa \AA \o \O \l \L \ss \SS !` ?`
\section{重音符号}
\`o \'o \^o \''o \~o \=o \.o \u{o} \v{o} \H{o} \r{o} \t{o} \b{o} \c{o} \d{o}
\end{document}
%导言区
\documentclass{ctexart}%ctexbook,ctexrep
%\usepackage{ctex}
\usepackage{amsmath}
\usepackage{amssymb}
%正文区(文稿区)
\begin{document}
%带编号
\begin{gather}
a+b = b+a \\
ab=ba
\end{gather}
%不带编号
\begin{gather*}
a+b = b+a \\
ab=ba
\end{gather*}
%在\\前使用\notag阻止编号
\begin{gather}
3^2 + 4^2 = 5^2 \notag \\
5^2 + 12^2 = 13^2
%align 和align* 环境 (用 & 进行对齐)
\begin{align}
x &= t + \cos t + 1 \\
y &=2\sin t
\end{align}
%不带编号
\begin{align*}
x &= t & x &= \cos t & x &=t \\
y &= 2t & y &= \sin(t+1) & y &= \sin t
\end{align*}
%split环境(对齐采用align环境的方式,编号在中间)
\begin{equation}
\begin{split}
\cos 2x &= \cos^2 x - \sin^2 x \\
$= 2\cos^2 x -1
\end{split}
\end{equation}
%cases 环境
%每行公式中使用 & 分隔为两部分,
% 通常表示值和后面的条件
\begin{equation}
D(x) = \begin{cases}
1, & \text{如果} x \in \mathbb{Q}; \\
0, & \text{如果} x \in \mathbb{R}\setminus\mathbb{Q}.
\end{cases}
\end{equation}
\end{document }
\section{简介}
\LaTex{}将排版内容分为文本模式和数学模式。文本模式用于普通文本排版,数学模式用于数学公式排版。
\section{行内公式}
\subsection{美元符号}
交换律是$a+b=b+a$,如$1+2=2+1=3$
\subsection{小括号}
交换律是\(a+b=b+a\),如\(1+2=2+1=3\)
\subsection{math环境}
交换律是\begin{math}a+b=b+a\end{math},如\begin{math}1+2=2+1=3\end{math}
\section{上下标}
\subsection{上标}
$3x^{20} - x +2 = 0$
$3x^{3x^{20} -x +2} -x + 2 =0$
\subsection{下标}
$a_0, a_1, a_2$
$a_0, a_1,a_2,...,a_{100}$
$a_0, a_1,a_2,...,a_{3x^{20} - x +2 = 0}$
\section{希腊字母}
$\alpha$
$\beta$
$\gamma$
$\epsilon$
$\pi$
$\omega$
$\Gamma$
$\Delta$
$\Theta$
$\Pi$
$\Omega$
\section{数学函数}
$\log$
$\sin$
$\cos$
$\arcsin$
$\arccos$
$\ln$
$\sqrt{2}$
$\sqrt{x^2 + y^2}$
$\sqrt{2+\sqrt{2}}$
$\sqrt[4]{x}$
\section{分式}
大约是原体积的$3/4$
大约是原体积的$\frac{3}{4}$
$\frac{x}{x^2+x+1}$
$\frac{\sqrt{x-1}}{\sqrt{x+1}}$
$\frac{1}{1+\frac{1}{x}}$
$\sqrt{\frac{x}{x^2+x+1}}$
\section{行间公式}
\subsection{双美元符号}
交换律是$$a+b=b+a$$,如$$1+2=2+1=3$$
\subsection{中括号}
交换律是
\[a+b=b+a\]
如
\[1+2=2+1=3\]
\subsection{displaymath环境}
交换律是
\begin{displaymath}a+b=b+a\end{displaymath}
如
\begin{displaymath}1+2=2+1=3\end{displaymath}
\subsection{自动编号公式equation环境}
交换律见式\ref{eq:commutative}
\begin{equation}
a+b=b+a \label{eq:commutative}
\end{equation}
subsection{不编号公式equation*环境}
%交换律见式\ref{eq:commutative2}:
\begin{equation*}
a+b=b+a%\label{eq:commutative2}
\end{equation*}
\usepackage{amsmath}
%导言区
\documentclass{ctexbook}%book, report, letter
\usepackage{ctex}
\ctexset{
section = {
format+ = \zihao{-4) \heiti \raggedright,
name = {,、},
number = \chinese{section},
beforeskip = 1.0ex plus 0.2ex minus .2ex,
afterskip = 1.0ex plus 0.2ex minus .2ex,
aftername = \hspace{0pt}
},
subsection = {
format+= \zihao{5} \heiti \raggedright,
%name={\thesubsection、},
name = {,、},
number = \arabic{subsection},
beforeskip = 1.0ex plus 0.2ex minus .2ex,
afterskip = 1.0ex plus 0.2ex minus .2ex,
aftername = \hspace{0pt}
}
}
%正文区(文稿区)
\begin{document}
\tableofcontents
\chapter{绪论}
\section{引言}
推荐系统是信息过载所采用的措施,面对海量的数据信息, 从中快速推荐出符合用户特点的物品。解决一些人的“选择 恐惧症”;面向没有明确需求的人。
推荐系统是信息过载所采用的措施,面对海量的数据信息, 从中快速推荐出符合用户特点的物品。解决一些人的“选择 恐惧症”;面向没有明确需求的人。\par解决如何让自己生产的信息脱颖而出,受到大众的喜爱。
\section{实验方法}
\section{实验结果}
\subsection{数据}
\subsection{图表}
\subsubsection{实验条件}
\subsubsection{实验过程}
\subsection{结果分析}
\section{结论}
\section{致谢}
\end{document}
%导言区
\documentclass{ctexart}%ctexbook, ctexrep
%\usepackage{ctex}
\usepackage{amsmath}
\newcommand{\adots}{\mathinner{\mkern2mu%
\raisebox{0.1em}{.}\mkern2mu\raisebox{0.4em}{.}%
\mkern2mu\raisebox{0.7em}{.}\mkern1mu}}
%正文区{文稿区)
\begin{document}
\[
\begin{matrix}
0 & 1 \\
1 & 0
\end{matrix}
\]
pmatrix%小括号
bmatrix%中括号
Bmatrix%大括号
vmatrix%单竖线
Vmatrix%双竖线
%矩阵环境,用&分隔列,用\\分隔行
%可使用上下标
\[
A = \begin{pmatrix}
a_{11}^2 & a_{12}^2 & a_{13}^2\\
0 & a_{22} & a_{23}\\
0 & 0 & a_{33}
\end{pmatrix}
\]
% 常用省略号:\dots、\vdots、\ddots、\cdots、\adots
乘号 \times
\[
A = \begin{bmatrix}
a_{11} & \dots & a_{1n}\\
\adots & \ddots & \vdots \\
0 && a_{nn}
\end{bmatrix}_{n \times n}
\]
%分块矩阵(矩阵嵌套)
\[
\begin{pmatrix}
\begin{matrix} 1&0\\0&1 \end{matrix}
&\text{\Large 0} \\
\text{\Large 0} & \begin{matrix}
1&0\\0&-1 \end{matrix}
\end{pmatrix}
\]
%三角矩阵
\[\begin{pmatrix}
a_{11} & a_{12} & \cdots & a_{1n} \\
& a_{22} & \cdots &a_{2n} \\
& & \ddots & \vdots \\
\multitolumn{2}{c}{\raisebox{1.3ex}[0pt]{\Huge 0}}
& &a_{nn}
\end{pmatrix}
\]
%跨列的省略号:\hdotsfor{<列数>}
\[
\begin{pmatrix}
1 & \frac 12 & \dots & \frac 1n \\
\hdotsfor{4} \\
m & \frac m2 & \dots & \frac mn
\end{pmatrix}
\]
%行内小矩阵(smallmatrix)环境
复数$z =(x,y)$也可用矩阵
\begin{math}
\left(%需要手动加上左括号
\begin{smallmatrix}
x & -y \\ y & x
\end{smallmatrix}
\right)%需要手动加上右括号
\end{math}来表示。
%array环境(类似于表格环境tabular)
\[
\begin{array}{r|r}
\frac12 & 0 \\
\hline
0 & -\frac abc \\
\end{array}
\]
\[
\begin{array}{c@{\hspace{-5pt}}l}
\left(
\begin{array}{ccc|ccc}
a & \cdots & a & b & \cdots & b \\
& \ddots & \vdots & \vdots & b\\
& & a & b \\ \hline
& & & c & \cdots & c\\
& & & \vdots & & \vdots\\
\multicolumn{3}{c|}{\raisebox{2ex}[0pt]{\Huge 0}}
& c & \cdots & c
\end{array}
\right)
&
% 第1行第2列
\begin{array}{l}
%\left.仅表示与\right\}配对,什么都不输出
\left.\rule{0mm}{7mm}\right\}p\\
\\
\left.\rule{0mm}{7mm}\right\}q
\end{array}
\\[-5pt]
% 第2行第1列
\begin{array}{cc}
\underbrace{\rule{17mm}{0mm}}_m &
\underbrace{\rule{17mm}{0mm}}_m
\end{array}
& %第2行第2列
\end{array}
\]
\end{document}
%导言区
\documentclass{ctexart}%ctexbook,ctexrep
%\usepackage{ctex}
%正文区(文稿区)
\begin{document}
\LaTex{}中\Tex系统的吉祥物---小狮子见图\ref{fig-lion}:
\begin{figure}[htbp]
\centering
\includegraphics[scale=0.3]{lion}
\caption{\Tex 系统的吉祥物---小狮子}\label{fig-lion}
\end{figure}
当然在\LaTex{}中的表格\ref{tab-score}:
\begin{table}[h]
\centering
\caption{考试成绩单}\label{tab-score}
\begin{tabular}{|l | | c | c | c | p{1.5cm}|}
\hline
姓名 & 语文 & 数学 & 外语 & 备注 \\
\hline \hline
张三 & 87 & 100 & 93 & 优秀 \\
\hline
李四 & 75 & 64 & 52 & 补考另行通知 \\
\hline
王二 & 80 & 82 & 78 & \\
\hline
\end{tabular}
\end{table}
texdoc booktab
texdoc longtab
texdoc tabu
%<允许位置>参数(默认tbp)
%h,此处(here)-代码所在的上下文位置
%t, 页项(top)-代码所在页面或之后页面的顶部
%b,页底(bottom)-代码所在页面或之后页面的底部
%p,独立一页(page)-浮动页面
%标题控制(caption、bicaption等宏包)
%并排与子图表(subcaption、subfig、floatrow等宏包)
%绕排(picinpar、wrapfig等宏包)
\end{document}
%导言区
\documentclass{ctexart}%ctexbook,ctexrep
%\usepackage{ctex}
%导言区:\usepackage{graphicx}
%语法:\includegraphics[<选项>]{<文件名>}
%格式: EPS, PDF, PNG, JPEG,BMP
\usepackage{graphicx}
\graphicspath{{figures/},{pics/}%图片在当前目录下的figures目录
%正文区(文稿区)
\begin{document}
\LaTex{}中的插图:
\includegraphics{lion.eps}
\includegraphics{mountain.jpg}
\includegraphics{oscilloscope.pdf}
\includegraphics[scale=0.3]{lion}
\includegraphics[scale=0.03]{mountain}
\includegraphics[scale=0.3](oscilloscope)
\includegraphics[height=2cm]{lion}
\includegraphics[height=2cm]{mountain}
\includegraphics[height=2cm]{oscilloscope}
\includegraphics[height=0.1\textheight]{lion}
\includegraphics[height=0.1\textheight]{mountain}
\includegraphics[height=0.1\textheight]{oscilloscope}
\includegraphics[width=0.2\textheight]{lion}
\includegraphics[width=0.2\textheight]{mountain}
\includegraphics[width=0.2\textheight]{oscilloscope}
\includegraphics[angle=-45,width=0.2\textheight]{lion}
\includegraphics[width=0.2\textheight]{mountain}
\includegraphics[angle=45,width=0.2\textheight]{oscilloscope}
\end{document}
1. 在构件中设置默认文献工具为BibTex
2. 在谷歌学术中点击引用链接获取BibTex格式的数据
3. 新建.bib后缀的文件,复制获取参考文献数据
% 导言区
\documentclass{ctexart}%ctexbook, ctexrep
%\usepackage{ctex}
\bibliographystyle{plain}%指定排版样式 如plain unsrt alpha abbrv
% 正文区(文稿区)
\begin{document}
%一次管理,一次使用
%参考文献格式:
%\begin{thebibliography}{编号样本}
% \bibitem[label]{citekey}文献条目1
% \bibitem[label]{citekey}文献条目2
% ……
%\end{thebibliography}
%其中文献条目包括:作者,题目,出版社,年代,版本,页码等。
%引用时候要可以采用:\cite{引用标志1,引用标志2,……}
引用一本Guide\cite{latexGuide}等等
\begin{thebibliography}{99}
\bibitem{latexGuide} Kopka Helmut, W. Daly Patrick,
\emph{Guide to \LaTeX}, $4^{th}$ Edition.
Available at \texttt{http://www.amazon.com}.
\end{thebibliography}
这是一个参考文献的引用:\cite{scott1988social}
\bibliography{test}
\end{document}
### bib文件如下
@article{scott1988social,
title={Social network analysis},
author={Scott, John},
journal={Sociology},
volume={22},
number={1},
pages={109--127},
year={1988},
publisher={British Sociological Association Publications Limited}
}
%导言区
\documentclass{ctexart}%ctexbook,ctexrep
%\usepackage{ctex}
%正文区(文稿区)
\begin{document}
\begin{tabular}{|l | | c | c | c | p{1.5cm}|}
\hline
姓名 & 语文 & 数学 & 外语 & 备注 \\
\hline \hline
张三 & 87 & 100 & 93 & 优秀 \\
\hline
李四 & 75 & 64 & 52 & 补考另行通知 \\
\hline
王二 & 80 & 82 & 78 & \\
\hline
\end{tabular}
texdoc booktab
texdoc longtab
texdoc tabu
\end{document}