C++相关闲碎记录(17)

1、IO操作

（1）class及其层次体系

 （2）全局性stream对象

 （3）用来处理stream状态的成员函数

 前四个成员函数可以设置stream状态并返回一个bool值，注意fail()返回是failbit或者badbit两者中是否任一个设置，如果调用不带参数的clear()，所有的error flag均会被清除。

 下面这个例子用于检查failbit是否设置，若设置则清除。

if(strm.rdstate() & std::ios::failbit){
    std::cout << "failbit was set" << std::endl;
    strm.clear(strm.rdstate() & ~std::ios::failbit);
}

（4）stream异常

下面的例子要求所stream对所有的flag均抛出异常：

strm.exceptions(std::ios::eofbit | std::ios::failbit | std::ios::badbit);

但是如果传入0或者goodbit，就不会引发异常。

strm.exceptions(std::ios::goodbit);

 异常抛出的时机是在“程序调用clear()或setstate()之后”又设置了某些flag之际，如果某个标志已被设置但未被清除，也会抛出异常。

下面的例子从输入中读取浮点数，直到end-of-file为止，返回总和。

#include 
#include 
#include 

namespace MyLib {
    double readAndProcessSum (std::istream&);
}

int main()
{
    using namespace std;
    double sum;

    try {
        sum = MyLib::readAndProcessSum(cin);
    }
    catch (const ios::failure& error) {
        cerr << "I/O exception: " << error.what() << endl;
        return EXIT_FAILURE;
    }
    catch (const exception& error) {
        cerr << "standard exception: " << error.what() << endl;
        return EXIT_FAILURE;
    }
    catch (...) {
        cerr << "unknown exception" << endl;
        return EXIT_FAILURE;
    }

    // print sum
    cout << "sum: " << sum << endl;
}

#include 

namespace MyLib {
    double readAndProcessSum (std::istream& strm)
    {
        using std::ios;
        double value, sum;
    
        // save current state of exception flags
        ios::iostate oldExceptions = strm.exceptions();
    
        // let failbit and badbit throw exceptions
        // - NOTE: failbit is also set at end-of-file
        strm.exceptions (ios::failbit | ios::badbit);
    
        try {
            // while stream is OK
            // - read value and add it to sum
            sum = 0;
            while (strm >> value) {
                sum += value;
            }
        }
        catch (...) {
            // if exception not caused by end-of-file
            // - restore old state of exception flags
            // - rethrow exception
            if (!strm.eof()) {
                strm.exceptions(oldExceptions);  // restore exception flags
                throw;                           // rethrow
            }
        }
    
        // restore old state of exception flags
        strm.exceptions (oldExceptions);
    
        // return sum
        return sum;
    }
}

（5）读写字符的成员函数

 （6）输出控制manipulator

 （7）用户自定义操控器

#include 
#include 

template 
inline
std::basic_istream&
ignoreLine (std::basic_istream& strm)
{
    // skip until end-of-line
    strm.ignore(std::numeric_limits::max(),
                strm.widen('\n'));

    // return stream for concatenation
    return strm;
}

这个控制器用来忽略一行，如果要忽略多行，就调用多次

std::cin >> ignoreLine >> ignoreLine;

函数ignore(max, c)会略去input stream中的字符c之前的所有字符，如果前面的字符多余max个，就略去max个，如果先遇到stream结尾，就全部忽略。

#include 
#include "ignore1.hpp"

int main()
{
    int i;
    std::cout << "read int and ignore rest of the line" << std::endl;
    std::cin >> i;

    // ignore the rest of the line
    std::cin >> ignoreLine;

    std::cout << "int: " << i << std::endl;

    std::cout << "read int and ignore two lines" << std::endl;
    std::cin >> i;

    // ignore two lines
    std::cin >> ignoreLine >> ignoreLine;

    std::cout << "int: " << i << std::endl;
}

#include 
#include 

class ignoreLine
{
  private:
    int num;
  public:
    explicit ignoreLine (int n=1) : num(n) {
    }
    
    template 
    friend std::basic_istream&
    operator>> (std::basic_istream& strm,
                const ignoreLine& ign)
    {
        // skip until end-of-line num times
        for (int i=0; i::max(),
                        strm.widen('\n'));
        }

        // return stream for concatenation
        return strm;
    }
};

#include 
#include "ignore2.hpp"

int main()
{
    int i;
    std::cout << "read int and ignore rest of the line" << std::endl;
    std::cin >> i;

    // ignore the rest of the line
    std::cin >> ignoreLine();

    std::cout << "int: " << i << std::endl;

    std::cout << "read int and ignore two lines" << std::endl;
    std::cin >> i;

    // ignore two lines
    std::cin >> ignoreLine(2);

    std::cout << "int: " << i << std::endl;

    std::cout << "read int: " << std::endl;
    std::cin >> i;
    std::cout << "int: " << i << std::endl;
}

（8）format flag格式标志

//set flags showpos and uppercase
std::cout.setf(std::ios::showpos | std::ios::uppercase);
//set only the flag hex in the group basefield
std::cout.setf(std::ios::hex, std::ios::basefield);
//clear the flag uppercase
std::cout.unsetf(std::ios::uppercase);

using std::ios;
using std::cout;
//save current format flags
ios::fmtflags oldFlags = cout.flags();

//do some changes
cout.setf(ios::showpos | ios::showbase | ios::uppercase);
cout.setf(ios::internal, ios::adjustfield);
cout << std::hex << x << std::endl;
cout.flags(oldFlags);

 （9）文件读写

 （10）文件flag

//seek to the beginning of the file
file.seek(0, std::ios::beg);
//seek 20 characters forward
file.seek(20, std::ios::cur);
//seek 10 characters before the end
file.seek(-10, std::ios::end);

（11）重定向

#include 
#include 
#include 
using namespace std;

void redirect(ostream&);

int main()
{
    cout << "the first row" << endl; //输出控制台

    redirect(cout);  //重定向到文件中，执行完毕之后，又重新指向控制台

    cout << "the last row" << endl;//指向控制台
}

void redirect (ostream& strm)
{
    // save output buffer of the stream
    // - use unique pointer with deleter that ensures to restore
    //     the original output buffer at the end of the function
    // 定义了一个删除器
    auto del = [&](streambuf* p) {
                   strm.rdbuf(p);
               };
    // 使用智能指针的目的时在退出函数时，还原ostream
    unique_ptr origBuffer(strm.rdbuf(),del);

    // redirect ouput into the file redirect.txt
    ofstream file("redirect.txt");
    // strm指向file缓冲区
    strm.rdbuf (file.rdbuf());
    // 此两字符都会写入到文件中
    file << "one row for the file" << endl;
    strm << "one row for the stream" << endl;
    // 程序结束时，调用智能指针的删除器，将输出重新指向p，而这个p就是strm.rdbuf()
} //

（12）可读写的stream

定义一个file stream缓冲区，并将它安装在两个stream对象上，

std::filebuf buffer;
std::ostream out(&buffer);
std::istream in(&buffer);
buffer.open("example.txt", std::ios::in | std::ios::out);

#include 
#include 
using namespace std;

int main()
{
    // open file "example.dat" for reading and writing
    filebuf buffer;
    ostream output(&buffer);
    istream input(&buffer);
    buffer.open ("example.dat", ios::in | ios::out | ios::trunc);

    for (int i=1; i<=4; i++) {
        // write one line
        output << i << ". line" << endl;

        // print all file contents
        input.seekg(0);          // seek to the beginning
        char c;
        while (input.get(c)) {
            cout.put(c);
        }
        cout << endl;
        input.clear();           // clear  eofbit and  failbit
    }
}
输出：
1. line
       
1. line
2. line
       
1. line
2. line
3. line

1. line
2. line
3. line
4. line

（13）stream 缓冲区接口

 函数pubseekoff()和pubseekpos()控制读写动作的当前位置，究竟是控制读或者写，取决于最后实参，其类型为ios_base::openmode，如果没有特别指定，实参默认值为ios_base::in|ios_base::out，一旦设置ios_base::in，读的位置就会跟着改变，一旦设置ios_base::out，写的位置也会跟着变化，函数pubseekpos()会把stream当前位置移至第一实参指示的绝对位置上，函数pubseekoff()则把stream当前位置移至某个相对位置，偏移量由第一实参决定，起始位置由第二实参决定，可以是ios_base::cur, ios_base::beg, ios_base::end。两个函数都返回stream所在的位置或者一个无效的位置，将函数的结果拿来和对象pos_type(off_type(-1))比较(pos_type和off_type是处理stream位置时所用的类型），如果希望获取stream当前位置，可以使用pubseekoff(): sbuf.pubseekoff(0, std::ios:cur)。

（14）output stream 缓冲区的iterator

使用ostreambuf_iterator将一个字符串写入stream缓冲区内：

std::ostreambuf_iterator bufWriter(std::cout);
std::string hello("hello, world\n");
std::copy(hello.begin(), hello.end(), bufWriter);

 （15）input stream 缓冲区的iterator

 将输入缓冲区的字符输出：

#include 
#include 
using namespace std;

int main()
{
    // input stream buffer iterator for cin
    istreambuf_iterator inpos(cin);

    // end-of-stream iterator
    istreambuf_iterator endpos;

    // output stream buffer iterator for cout
    ostreambuf_iterator outpos(cout);

    // while input iterator is valid
    while (inpos != endpos) {
        *outpos = *inpos;    // assign its value to the output iterator
        ++inpos;
        ++outpos;
    }
}