LT8668SXC DP转VBO/HDMI2.1/EDP 最高可支持到8k60hz

LT8668SXC DP转VBO/HDMI2.1/EDP 最高可支持到8k60hz_第1张图片
DP1.4a/eDP1.4b Receiver
Compliant with DisplayPort specification 1.4a for 1.62Gbps,
2.7Gbps, 5.4Gbps and 8.1Gbps
Compliant with Embedded DisplayPort specification
version 1.4b
Support DisplayPort 1/2/4 lanes
Support HDCP 1.3/2.3
Support HDCP repeater
Support RGB 6/8/10/12 bpc, YCbCr4:4:4/YCbCr4:2:2/
YCbCr4:2:0 8/10/12 bpc
Support up to 8K@30Hz RGB 6bpc, YCbCr4:2:2 10 bpc or
YCbCr4:2:0 12 bpc
Support up to 4K@120Hz RGB 6bpc, YCbCr4:2:2 10 bpc
or YCbCr4:2:0 12 bpc
Support up to 8K@60Hz DSC pass-through
Support static HDR10
Support ASSR for eDP
Support SSC
DP1.4a/eDP1.5 Transmitter
Compliant with DisplayPort specification 1.4a for 1.62Gbps,
2.7Gbps, 5.4Gbps, 8.1Gbps
Compliant with Embedded DisplayPort specification
version 1.5
Support DisplayPort 1/2/4 lanes
Support HDCP 1.3/2.3
Support HDCP repeater
Support RGB 6/8/10/12 bpc, YCbCr4:4:4/YCbCr4:2:2/
YCbCr4:2:0 8/10/12 bpc
Support up to 8K@30Hz RGB 6bpc, YCbCr4:2:2 10 bpc or
YCbCr4:2:0 12 bpc
Support up to 4K@120Hz RGB 6bpc, YCbCr4:2:2 10 bpc
or YCbCr4:2:0 12 bpc
Support up to 8K@60Hz DSC pass-through
Support static HDR10
Support FEC
Support Adaptive-Sync
Support ASSR for eDP
Support SSC
HDMI2.1 Transmitter
Compliant with HDMI2.1, HDMI2.0b, HDMI1.4 and DVI1.0
Data rate up to 8Gbps
Support HDCP 1.4/2.3
Support HDCP repeater
Support RGB 8/10/12 bpc, YCbCr4:4:4/ YCbCr4:2:2/
YCbCr4:2:0 /8/10/12 bpc
Support up to 8K@30Hz RGB/YCbCr4:4:4/ YCbCr4:2:2
8bpc or YCbCr4:2:0 12 bpc
Support up to 4K@120Hz RGB/YCbCr4:4:4/ YCbCr4:2:2
8bpc or YCbCr4:2:0 12 bpc
Support up to 8K@60Hz DSC pass-through
Support static HDR10
eDP1.4b / eDPx Transmitter
Compliant Embedded DisplayPort specification version
1.4b
Support resolution up to 4K@60Hz
Support RGB/YUV 8/10-bit
Support eDP transmitter up to 8 lane with 5.4Gbps link rate
Support 8 pairs eDPx @3Gbps interface
Support ASSR for eDP
Support SSC
LT8668SX/LT8668SXC DP eDPx/eDP 源码 设置说明
1 Global 配置, globalLT.h 文件:
#define CHIP_B05 DISABLED
//DISABLED,ENABLED
// LT8668SX U3 B03 设置 DISABLED
// LT8668SX U3 B05 设置 ENABLED
// LT8668SX C : Don't care
#define CHIP_SXC ENABLED
//DISABLED,ENABLED
// LT8668SX C chip 设置 ENABLED
// LT8668SX chip 设置 DISABLED
#define LT8668SXC_EVB DISABLED
//DISABLED,ENABLED
// 如果用 LT8668SXC demo 板 调试,设置 ENABLED ;否则设置 DISABLED
// 因为 LT8668SX C demo 板 的 DPRX P/N eDP 8lane TX P/N 为了走线方便,有
swap ,在寄存器配置上需要跟着 swap

你可能感兴趣的:(龙讯,HDMI,转接芯片,网络,嵌入式硬件,经验分享,音视频)