DazzlingTiger
DazzlingTiger

关于Cloudera Hadoop的安装（CentOS）- 官文标注（待完成）

CDH 5 and Cloudera Manager 5 Requirements and Supported Versions

In an enterprise data hub, Cloudera Manager and CDH interact with several products such as Apache Accumulo, Apache Impala (incubating), Hue, Cloudera Search, and Cloudera Navigator. This guide provides information about which major and minor release version of a product is supported with which release version of CDH and Cloudera Manager.

Compatibility across different release versions of Cloudera Manager and CDH must be taken into account, especially when carrying out install/upgrade procedures.

当安装、升级时，尤其要考虑Cloudera Manager和CDH版本的兼容性。

JDK compatibility also varies across different Cloudera Manager and CDH versions. Certain versions of CDH 5 are compatible with both JDK 7 and JDK 8. In such cases, ensure all your services are deployed on the same major version. For example, you should not run Hadoop on JDK 7 while running Sqoop on JDK 8. Additionally, since Cloudera does not support mixed environments, all nodes in your cluster must be running the same major JDK version. Cloudera only supports JDKs provided by Oracle.

Cloudera Hadoop集群所有节点必须要使用同一版本的JDK。官方建议安装Oracle JDK，不支持混合版本环境的JDK。

After installing each entity, upgrade to the latest patch version and apply any other appropriate updates. An available update might be specific to the operating system on which it is installed. For example, if you are using CentOS in your environment, you could choose 6 as the major version and 4 as the minor version to indicate that you are using CentOS 6.4. After installing this operating system, apply all relevant CentOS 6.4 upgrades and patches. In some cases, such as some browsers, a minor version might not be listed.

Each product matrix contains at least a subset of the following fields:
  • Feature: This column lists notable new features that have been included in a particular release. For products/releases that do not have this column, refer the respective Release Notes for detailed information.
  • Lowest supported Cloudera Manager version: Specifies the earliest version of Cloudera Manager that supports a product release version.
  • Lowest supported CDH version: Specifies the earliest version of CDH that supports a product release version. The Cloudera Search and Impala matrices are an exception to this since each release is only compatible with a specific CDH release.
  • Lowest supported Impala version: This column might not apply to all products, for example, Cloudera Search.
  • Lowest supported Search version: This column might not apply to all products, for example, Cloudera Impala.
  • Integrated into CDH: This column specifies whether a particular release is shipped with CDH or available independently. This field may not apply to all products, for example, Cloudera Navigator.

Continue reading:

  • CDH Requirements for Cloudera Manager
  • CDH and Cloudera Manager Supported Operating Systems
  • Filesystem Requirements
  • CDH and Cloudera Manager Supported Databases
  • CDH and Cloudera Manager Supported JDK Versions
  • Cloudera Manager Supported Browsers
  • CDH and Cloudera Manager Supported Transport Layer Security Versions
  • Cloudera Manager Resource Requirements
  • CDH and Cloudera Manager Networking and Security Requirements
  • Apache Accumulo
  • Apache Impala (incubating)
  • Apache Kafka
  • Apache Kudu
  • Cloudera Navigator
  • Cloudera Navigator Encryption
  • Apache Sentry
  • Apache Spark
  • EMC Isilon
  • Cloudera Manager Backup and Disaster Recovery
  • Supported Configurations with Virtualization and Cloud Platforms

CDH Requirements for Cloudera Manager

The Cloudera Manager minor version must always be equal to or greater than the CDH minor version. Older versions of Cloudera Manager might not support features in newer versions of CDH. For example, to upgrade to CDH 5.7.1 you must first upgrade to Cloudera Manager 5.7.0.

Cloudera Manager的主版本号和次版本号要和CDH的主次版本号一致或者比CDH的次版本号稍大。比如，CDH为5.7.1那么Cloudera Manager至少为CM5.7.0(CM5.7.1、CM5.7.2都可以使用)

CDH and Cloudera Manager Supported Operating Systems

CDH 5.x provides 64-bit packages for select versions of RHEL-compatible, SLES, Ubuntu, and Debian operating systems.

  • CDH and Cloudera Manager 5.11.x Supported Operating Systems
  • CDH and Cloudera Manager 5.10.x Supported Operating Systems
  • CDH and Cloudera Manager 5.9.x Supported Operating Systems
  • CDH and Cloudera Manager 5.8.x Supported Operating Systems
  • CDH and Cloudera Manager 5.7.x Supported Operating Systems
  • CDH and Cloudera Manager 5.6.x Supported Operating Systems
  • CDH and Cloudera Manager 5.5.x Supported Operating Systems
  • CDH and Cloudera Manager 5.4.x Supported Operating Systems
  • CDH and Cloudera Manager 5.3.x Supported Operating Systems
  • CDH and Cloudera Manager 5.2.x Supported Operating Systems
  • CDH and Cloudera Manager 5.1.x Supported Operating Systems
  • CDH and Cloudera Manager 5.0.x Supported Operating Systems
每个版本的CDH和CM都有自己的相关说明文档，写的很详细。

Important: In order to be covered by Cloudera Support:
  • All CDH hosts in a logical cluster must run on the same major OS release.                    操作系统主版本号必须一致
  • Cloudera temporarily allows a mixed OS configuration during an OS upgrade project.  在操作系统升级时，Cloudera允许混合版本操作系统间的配置。
  • Cloudera Manager must run on the same OS release as one of the CDH clusters it manages.CM也必须和CDH安装在相同版本的操作系统上。

Cloudera recommends running the same minor release cross-cluster. However, the risk caused by running different minor OS releases is considered lower than the risk of running different major OS releases.

Gateway hosts may use RHEL/Centos 7.2, subject to some restrictions. See Operating System Support for Gateway Hosts (CDH 5.11 and higher only)

Other disclaimers:
  • RHEL / CentOS / OEL 6.9 is supported in C5.11.0 with a Known Issue.
  • RHEL / CentOS / OEL 7.0 is not supported. 不支持CentOS7.0
  • Red Hat only supports specific upgrades from RHEL 6 to 7. Contact your OS vendor and review What are the supported use cases for upgrading to RHEL 7?
  • SLES hosts running Cloudera Manager agents must use SLES SDK 11 SP1.
  • Cloudera does not support CDH cluster deployments in Docker containers.
  • Cloudera Enterprise (without Cloudera Navigator) is supported on platforms with Security-Enhanced Linux (SELinux) enabled.
Important: Cloudera is not responsible for policy support nor policy enforcement. If you experience issues with SELinux, contact your OS support provider.

CDH and Cloudera Manager 5.11.x Supported Operating Systems

Operating System Version (bold=new)
Red Hat Enterprise Linux-compatible

RHEL / CentOS

Max SE Linux support: 7.2

7.3, 7.2, 7.1

6.9 (with Known Issue) 6.8, 6.7, 6.6, 6.5, 6.4

5.11, 5.10, 5.7
Oracle Enterprise Linux (OEL)

7.3, 7.2, 7.1 (UEK default)

6.8, 6.7, 6.6 (UEK R3)

6.5 (UEK R2, UEK R3)

6.4 (UEK R2)

5.11, 5.10, 5.7 (UEK R2)
SUSE Linux Enterprise Server
SLES

12 SP2, 12 SP1

11 SP4, 11 SP3, 11 SP2
Ubuntu/Debian
Ubuntu

16.04 LTS (Xenial)

14.04 LTS (Trusty)

12.04 LTS (Precise)
Debian

8.2, 8.4 (Jessie)

7.0, 7.1, 7.8 (Wheezy)
Operating System Support for Gateway Hosts (CDH 5.11 and higher only)

A Gateway host that is dedicated to running Cloudera Data Science Workbench can use RHEL/CentOS 7.2 even if the remaining hosts in your cluster are running any of the other supported operating systems. All hosts must run the same version of the Oracle JDK.

CDH and Cloudera Manager 5.10.x Supported Operating Systems

Operating System Version (bold=new)
Red Hat Enterprise Linux-compatible
RHEL / CentOS

Max SE Linux support: 6.7

7.3, 7.2, 7.1

6.8, 6.7, 6.6, 6.5, 6.4

5.11, 5.10, 5.7
Oracle Enterprise Linux (OEL)

7.3, 7.2, 7.1 (UEK default)

6.8, 6.7, 6.6 (UEK R3)

6.5 (UEK R2, UEK R3)

6.4 (UEK R2)

5.11, 5.10, 5.7 (UEK R2)
SUSE Linux Enterprise Server
SLES

12 SP1

11 SP4, 11 SP3, 11 SP2
Ubuntu/Debian
Ubuntu

14.04 LTS (Trusty)

12.04 LTS (Precise)
Debian

8.4, 8.2 (Jessie)

7.8, 7.1, 7.0 (Wheezy)

CDH and Cloudera Manager 5.9.x Supported Operating Systems

Operating System Version (bold=new)
Red Hat Enterprise Linux-compatible
RHEL / CentOS

Max SE Linux support: 6.7

7.2, 7.1

6.8, 6.7, 6.6, 6.5, 6.4

5.11, 5.10, 5.7
Oracle Enterprise Linux (OEL)

7.2, 7.1 (UEK default)

6.8, 6.7, 6.6 (UEK R3)

6.5 (UEK R2, UEK R3)

6.4 (UEK R2)

5.11, 5.10, 5.7 (UEK R2)
SUSE Linux Enterprise Server
SLES

12 SP1

11 SP4, 11 SP3, 11 SP2
Ubuntu/Debian
Ubuntu

14.04 LTS (Trusty)

12.04 LTS (Precise)
Debian

8.4, 8.2 (Jessie)

7.8, 7.1, 7.0 (Wheezy)

CDH and Cloudera Manager 5.8.x Supported Operating Systems

Operating System Version (bold=new)
Red Hat Enterprise Linux-compatible
RHEL / CentOS

Max SE Linux support: 6.6

7.2, 7.1

6.7, 6.6, 6.5, 6.4

5.11, 5.10, 5.7
Oracle Enterprise Linux (OEL)

7.2, 7.1 (UEK default)

6.7, 6.6 (UEK R3)

6.5 (UEK R2, UEK R3)

6.4 (UEK R2)

5.11, 5.10, 5.7 (UEK R2)
SUSE Linux Enterprise Server
SLES

11 SP4, 11 SP3, 11 SP2
Ubuntu/Debian
Ubuntu

14.04 LTS (Trusty)

12.04 LTS (Precise)
Debian

8.2 (Jessie)

7.8, 7.1, 7.0 (Wheezy)

CDH and Cloudera Manager 5.7.x Supported Operating Systems

Operating System Version (bold=new)
Red Hat Enterprise Linux-compatible
RHEL / CentOS

Max SE Linux support: 6.6

7.2, 7.1

6.7, 6.6, 6.5, 6.4

5.11, 5.10, 5.7
Oracle Enterprise Linux (OEL)

7.2, 7.1 (UEK default)

6.7, 6.6 (UEK R3)

6.5 (UEK R2, UEK R3)

6.4 (UEK R2)

5.11, 5.10, 5.7 (UEK R2)
SUSE Linux Enterprise Server
SLES

11 SP4, 11 SP3, 11 SP2
Ubuntu/Debian
Ubuntu

14.04 LTS (Trusty)

12.04 LTS (Precise)
Debian

7.8, 7.1, 7.0 (Wheezy)

CDH and Cloudera Manager 5.6.x Supported Operating Systems

Operating System Version (bold=new)
Red Hat Enterprise Linux-compatible
RHEL / CentOS

Max SE Linux support: 6.6

7.1

6.7, 6.6, 6.5, 6.4

5.10, 5.7
Oracle Enterprise Linux (OEL)

7.1 (UEK default)

6.7, 6.6 (UEK R3)

6.5 (UEK R2, UEK R3)

6.4 (UEK R2)

5.10, 5.6 (UEK R2)
SUSE Linux Enterprise Server
SLES

11 SP3, 11 SP2
Ubuntu/Debian
Ubuntu

14.04 LTS (Trusty)

12.04 LTS (Precise)
Debian

7.1, 7.0 (Wheezy)

CDH and Cloudera Manager 5.5.x Supported Operating Systems

Operating System Version (bold=new)
Red Hat Enterprise Linux-compatible
RHEL / CentOS

Max SE Linux support: 6.6

7.1

6.7, 6.6, 6.5, 6.4

5.10, 5.7
Oracle Enterprise Linux (OEL)

7.1 (UEK default)

6.7, 6.6 (UEK R3)

6.5 (UEK R2, UEK R3)

6.4 (UEK R2)

5.10, 5.6 (UEK R2)
SUSE Linux Enterprise Server
SLES

11 SP3, 11 SP2
Ubuntu/Debian
Ubuntu

14.04 LTS (Trusty)

12.04 LTS (Precise)
Debian

7.1, 7.0 (Wheezy)

CDH and Cloudera Manager 5.4.x Supported Operating Systems

Operating System Version (bold=new)
Red Hat Enterprise Linux-compatible
RHEL / CentOS

Max SE Linux support: 6.5

6.6, 6.5, 6.4

5.10, 5.7
Oracle Enterprise Linux (OEL)

6.6 (UEK R3)

6.5 (UEK R2, UEK R3)

6.4 (UEK R2)

5.10, 5.6 (UEK R2)
SUSE Linux Enterprise Server
SLES

11 SP3, 11 SP2
Ubuntu/Debian
Ubuntu

14.04 LTS (Trusty)

12.04 LTS (Precise)
Debian

7.1, 7.0 (Wheezy)

CDH and Cloudera Manager 5.3.x Supported Operating Systems

Operating System Version (bold=new)
Red Hat Enterprise Linux-compatible
RHEL / CentOS

Max SE Linux support: 6.4

6.5, 6.4

5.7
Oracle Enterprise Linux (OEL)

6.5 (UEK R2, UEK R3)

6.4 (UEK R2)

5.6 (UEK R2)
SUSE Linux Enterprise Server
SLES

11 SP3, 11 SP2
Ubuntu/Debian
Ubuntu

14.04 LTS (Trusty)

12.04 LTS (Precise)
Debian

7.1, 7.0 (Wheezy)

CDH and Cloudera Manager 5.2.x Supported Operating Systems

Operating System Version (bold=new)
Red Hat Enterprise Linux-compatible
RHEL / CentOS

Max SE Linux support: 6.4

6.5, 6.4

5.7
Oracle Enterprise Linux (OEL)

6.5 (UEK R2, UEK R3)

6.4 (UEK R2)

5.6 (UEK R2)
SUSE Linux Enterprise Server
SLES

11 SP3, 11 SP2
Ubuntu/Debian
Ubuntu

14.04 LTS (Trusty)

12.04 LTS (Precise)
Debian

7.1, 7.0 (Wheezy)

CDH and Cloudera Manager 5.1.x Supported Operating Systems

Operating System Version (bold=new)
Red Hat Enterprise Linux-compatible
RHEL / CentOS

Max SE Linux support: 6.4

6.5, 6.4

5.7
Oracle Enterprise Linux (OEL)

6.5 (UEK R2, UEK R3)

6.4 (UEK R2)

5.6 (UEK R2)
SUSE Linux Enterprise Server
SLES

11 SP3, 11 SP2
Ubuntu/Debian
Ubuntu

12.04 LTS (Precise)
Debian

7.1, 7.0 (Wheezy)

CDH and Cloudera Manager 5.0.x Supported Operating Systems

Operating System Version
Red Hat Enterprise Linux-compatible
RHEL / CentOS

Max SE Linux support: 6.6

6.5, 6.4

5.7
Oracle Enterprise Linux (OEL)

6.5 (UEK R2, UEK R3)

6.4 (UEK R2)

5.6 (UEK R2)
SUSE Linux Enterprise Server
SLES

11 SP3, 11 SP2
Ubuntu/Debian
Ubuntu

12.04 LTS (Precise)
Debian

7.1, 7.0 (Wheezy)

Filesystem Requirements

Supported Filesystems

The Hadoop Distributed File System (HDFS) is designed to run on top of an underlying filesystem in an operating system. Cloudera recommends that you use either of the following filesystems tested on thesupported operating systems:

  • ext3: This is the most tested underlying filesystem for HDFS.
  • ext4: This scalable extension of ext3 is supported in more recent Linux releases.Important: Cloudera does not support in-place upgrades from ext3 to ext4. Cloudera recommends that you format disks as ext4 before using them as data directories.
  • XFS: This is the default filesystem in RHEL 7.

File Access Time

Linux filesystems keep metadata that record when each file was accessed. This means that even reads result in a write to the disk. To speed up file reads, Cloudera recommends that you disable this option, called atime, using the mount option in /etc/fstab:

/dev/sdb1 /data1 ext4 defaults,noatime 0

Apply the change without rebooting:

mount -o remount /data1

Filesystem Mount Options

The filesystem mount options have a sync option that allows you to write synchronously.

However, using the sync option will lead to poor performance for services that write data to disks, such as HDFS, YARN, Kafka and Kudu. In CDH most writes are already replicated. Therefore, having synchronous writes to disks is unnecessary, expensive, and not worth the added safety it provides.

CDH and Cloudera Manager Supported Databases

Cloudera Manager and CDH come packaged with an embedded PostgreSQL database, but it is recommended that you configure your cluster with custom external databases, especially in production.

In most cases (but not all), Cloudera supports versions of MariaDB, MySQL and PostgreSQL that are native to each supported Linux distribution.

After installing a database, upgrade to the latest patch and apply appropriate updates. Available updates may be specific to the operating system on which it is installed.

Notes:
  • Use UTF8 encoding for all custom databases.
  • Cloudera Manager installation fails if GTID-based replication is enabled in MySQL.
  • Hue requires the default MySQL/MariaDB version (if used) of the operating system on which it is installed. See Hue Databases.
  • Both the Community and Enterprise versions of MySQL are supported, as well as MySQL configured by the AWS RDS service.
Important: When you restart processes, the configuration for each of the services is redeployed using information saved in the Cloudera Manager database. If this information is not available, your cluster does not start or function correctly. You must schedule and maintain regular backups of the Cloudera Manager database to recover the cluster in the event of the loss of this database.
 MySQL Support across CM/CDH 5 Releases
MySQL C5.11 C5.10 C5.9 C5.8 C5.7 C5.6 C5.5 C5.4 C5.3 C5.2 C5.1 C5.0
5.1
5.5
5.6  
5.7                    
 MariaDB Support across CM/CDH 5 Releases
MariaDB C5.11 C5.10 C5.9 C5.8 C5.7 C5.6 C5.5 C5.4 C5.3 C5.2 C5.1 C5.0
5.5          
10.0                  
 PostgreSQL Support across CM/CDH 5 Releases
Pgres C5.11 C5.10 C5.9 C5.8 C5.7 C5.6 C5.5 C5.4 C5.3 C5.2 C5.1 C5.0
8.1
8.3
8.4
9.1
9.2  
9.3    
9.4          
9.5                      
 Oracle Support across CM/CDH 5 Releases
Oracle C5.11 C5.10 C5.9 C5.8 C5.7 C5.6 C5.5 C5.4 C5.3 C5.2 C5.1 C5.0
11gr2
12c            
12cr1                      

CDH and Cloudera Manager Supported JDK Versions

Only 64 bit JDKs from Oracle are supported. Oracle JDK 7 is supported across all versions of Cloudera Manager 5 and CDH 5. Oracle JDK 8 is supported in C5.3.x and higher.

A supported minor JDK release will remain supported throughout a Cloudera major release lifecycle, from the time of its addition forward, unless specifically excluded. Warning: JDK 1.8u40 and JDK 1.8u60 are excluded from support. Also, the  Oozie Web Console returns 500 error when Oozie server runs on JDK 8u75 or higher.
Running CDH nodes within the same cluster on different JDK releases is not supported. JDK release across a cluster needs to match the patch level.
  • All nodes in your cluster must run the same Oracle JDK version.
  • All services must be deployed on the same Oracle JDK version.
The Cloudera Manager repository is packaged with Oracle JDK 1.7.0_67 (for  example) and can be automatically installed during a new installation or an upgrade. Note:   =  Minimum required JDK version.   =  Recommended JDK versions.
JDK 7 Versions Supported across CM/CDH 5 Releases
JDK 7 C5.11 C5.10 C5.9 C5.8 C5.7 C5.6 C5.5 C5.4 C5.3 C5.2 C5.1 C5.0
1.7u55  
1.7u67  
1.7u75        
1.7u80          
JDK 8 Versions Supported across CM/CDH 5 Releases
JDK 8 C5.11 C5.10 C5.9 C5.8 C5.7 C5.6 C5.5 C5.4 C5.3 C5.2 C5.1 C5.0
1.8u31      
1.8u74              
1.8u91                
1.8u102                  
1.8u111                    
1.8u121                      

Cloudera Manager Supported Browsers

Hue

Hue works with the two most recent  LTS (long term support) or  ESR (extended support release) browsers. Cookies and JavaScript must be on.
  • Chrome: Version history
  • Firefox: Version history
  • Internet Explorer: Version history
  • Safari (Mac only): Version history
Hue can display in older, and other, browsers, but you might not have access to all of its features. Important: To see all icons in the Hue Web UI, users with IE and HTTPS must add a Load Balancer.

Cloudera Manager

The Cloudera Manager Admin Console, which you use to install, configure, manage, and monitor services, supports the latest version of the following browsers:
  • Mozilla Firefox
  • Google Chrome
  • Internet Explorer
  • Safari.

CDH and Cloudera Manager Supported Transport Layer Security Versions

The following components are supported by the indicated versions of Transport Layer Security (TLS):

Components Supported by TLS

Component

 Role Name Port Version
Cloudera Manager Cloudera Manager Server   7182 TLS 1.2
Cloudera Manager Cloudera Manager Server   7183 TLS 1.2
Flume     9099 TLS 1.2
Flume   Avro Source/Sink   TLS 1.2
Flume   Flume HTTP Source/Sink   TLS 1.2
HBase Master HBase Master Web UI Port 60010 TLS 1.2
HDFS NameNode Secure NameNode Web UI Port 50470 TLS 1.2
HDFS Secondary NameNode Secure Secondary NameNode Web UI Port 50495 TLS 1.2
HDFS HttpFS REST Port 14000 TLS 1.1, TLS 1.2
Hive HiveServer2 HiveServer2 Port 10000 TLS 1.2
Hue Hue Server Hue HTTP Port 8888 TLS 1.2
Impala Impala Daemon Impala Daemon Beeswax Port 21000 TLS 1.2
Impala Impala Daemon Impala Daemon HiveServer2 Port 21050 TLS 1.2
Impala Impala Daemon Impala Daemon Backend Port 22000 TLS 1.2
Impala Impala StateStore StateStore Service Port 24000 TLS 1.2
Impala Impala Daemon Impala Daemon HTTP Server Port 25000 TLS 1.2
Impala Impala StateStore StateStore HTTP Server Port 25010 TLS 1.2
Impala Impala Catalog Server Catalog Server HTTP Server Port 25020 TLS 1.2
Impala Impala Catalog Server Catalog Server Service Port 26000 TLS 1.2
Oozie Oozie Server Oozie HTTPS Port 11443 TLS 1.1, TLS 1.2
Solr Solr Server Solr HTTP Port 8983 TLS 1.1, TLS 1.2
Solr Solr Server Solr HTTPS Port 8985 TLS 1.1, TLS 1.2
Spark History Server   18080 TLS 1.2
YARN ResourceManager ResourceManager Web Application HTTP Port 8090 TLS 1.2
YARN JobHistory Server MRv1 JobHistory Web Application HTTP Port 19890 TLS 1.2

Cloudera Manager Resource Requirements

Cloudera Manager requires the following resources:
  • Disk Space
    • Cloudera Manager Server
      • 5 GB on the partition hosting /var.
      • 500 MB on the partition hosting /usr.
      • For parcels, the space required depends on the number of parcels you download to the Cloudera Manager Server and distribute to Agent hosts. You can download multiple parcels of the same product, of different versions and different builds. If you are managing multiple clusters, only one parcel of a product/version/build/distribution is downloaded on the Cloudera Manager Server—not one per cluster. In the local parcel repository on the Cloudera Manager Server, the approximate sizes of the various parcels are as follows:
        • CDH 5 (which includes Impala and Search) - 1.5 GB per parcel (packed), 2 GB per parcel (unpacked)
        • Impala - 200 MB per parcel
        • Cloudera Search - 400 MB per parcel
    • Cloudera Management Service -The Host Monitor and Service Monitor databases are stored on the partition hosting /var. Ensure that you have at least 20 GB available on this partition.
    • Agents - On Agent hosts, each unpacked parcel requires about three times the space of the downloaded parcel on the Cloudera Manager Server. By default, unpacked parcels are located in/opt/cloudera/parcels.
  • RAM - 4 GB is recommended for most cases and is required when using Oracle databases. 2 GB might be sufficient for non-Oracle deployments with fewer than 100 hosts. However, to run the Cloudera Manager Server on a machine with 2 GB of RAM, you must tune down its maximum heap size (by modifying -Xmx in /etc/default/cloudera-scm-server). Otherwise the kernel might kill the Server for consuming too much RAM.
  • Python - Cloudera Manager requires Python 2.4 or higher (but is not compatible with Python 3.0 or higher). Hue in CDH 5 and package installs of CDH 5 require Python 2.6 or 2.7. All supported operating systems include Python version 2.4 or higher. Cloudera Manager is compatible with Python 2.4 through the latest version of Python 2.x. Cloudera Manager does not support Python 3.0 and higher.
  • Perl - Cloudera Manager requires perl.
  • python-psycopg2 package - Cloudera Manager 5.8 and higher has a new dependency on the packagepython-psycopg2. This package is not available in standard SLES 11 and SLES 12 repositories. You need to add this repository or install it manually to any machine that runs the Cloudera Manager Agent before you install or upgrade Cloudera Manager.

    If the Cloudera Manager Server and Agent run on the same host, install the Cloudera Manager Server first and then add the python-psycopg2 repository or package. After adding the repository or package, install the Cloudera Manager Agent.

    Download the python-psycopg2 repository or package from the following URL by selecting the correct SLES version: http://software.opensuse.org/download.html?project=server%3Adatabase%3Apostgresql&package=python-psycopg2

    You can add and install the repository manually or grab the package directly.

    To add the repository and manually install it, you need the URL to the repository. You can find the URL for your operating system version on the download page.

    For example, to add and manually install the  python-psycopg2 repository for SLES 11 SP4, run the following commands: 
    zypper addrepo http://download.opensuse.org/repositories/server:database:postgresql/SLE_11_SP4/server:database:postgresql.repo
zypper refresh
zypper install python-psycopg2

    Alternatively, you can grab the package directly from the download page. Select the python-psycopg2-2.6.2-.x86_64.rpm file for your operating system version.

CDH and Cloudera Manager Networking and Security Requirements

The hosts in a Cloudera Manager deployment must satisfy the following networking and security requirements:

  • Networking Protocols Support

    CDH requires IPv4. IPv6 is not supported and must be disabled.

    See also Configuring Network Names.

  • Multihoming Support

    – Multihoming CDH or Cloudera Manager is not supported outside specifically certified Cloudera partner appliances. Cloudera finds that current Hadoop architectures combined with modern network infrastructures and security practices remove the need for multihoming. Multihoming, however, is beneficial internally in appliance form factors to take advantage of high-bandwidth InfiniBand interconnects.

    Although some subareas of the product may work with unsupported custom multihoming configurations, there are known issues with multihoming. In addition, unknown issues may arise because multihoming is not covered by our test matrix outside the Cloudera-certified partner appliances.

  • Entropy

    Data at rest encryption requires sufficient entropy to ensure randomness.

    See Entropy Requirements.

  • Cluster hosts must have a working network name resolution system and correctly formatted /etc/hostsfile. All cluster hosts must have properly configured forward and reverse host resolution through DNS. The /etc/hosts files must:
    • Contain consistent information about hostnames and IP addresses across all hosts
    • Not contain uppercase hostnames
    • Not contain duplicate IP addresses

    Cluster hosts must not use aliases, either in /etc/hosts or in configuring DNS. A properly formatted/etc/hosts file should be similar to the following example:

    127.0.0.1 localhost.localdomain localhost
192.168.1.1 cluster-01.example.com cluster-01
192.168.1.2 cluster-02.example.com cluster-02
192.168.1.3 cluster-03.example.com cluster-03
  • In most cases, the Cloudera Manager Server must have SSH access to the cluster hosts when you run the installation or upgrade wizard. You must log in using a root account or an account that has password-less sudo permission. For authentication during the installation and upgrade procedures, you must either enter the password or upload a public and private key pair for the root or sudo user account. If you want to use a public and private key pair, the public key must be installed on the cluster hosts before you use Cloudera Manager.

    Cloudera Manager uses SSH only during the initial install or upgrade. Once the cluster is set up, you can disable root SSH access or change the root password. Cloudera Manager does not save SSH credentials, and all credential information is discarded when the installation is complete.

  • If single user mode is not enabled, the Cloudera Manager Agent runs as root so that it can make sure the required directories are created and that processes and files are owned by the appropriate user (for example, the hdfs and mapred users).
  • No blocking is done by Security-Enhanced Linux (SELinux).Note: Cloudera Enterprise is supported on platforms with Security-Enhanced Linux (SELinux) enabled. However, Cloudera does not support use of SELinux with Cloudera Navigator. Cloudera is not responsible for policy support nor policy enforcement. If you experience issues with SELinux, contact your OS provider.
  • No blocking by iptables or firewalls; port 7180 must be open because it is used to access Cloudera Manager after installation. Cloudera Manager communicates using specific ports, which must be open.
  • For RHEL and CentOS, the /etc/sysconfig/network file on each host must contain the hostname you have just set (or verified) for that host.
  • Cloudera Manager and CDH use several user accounts and groups to complete their tasks. The set of user accounts and groups varies according to the components you choose to install. Do not delete these accounts or groups and do not modify their permissions and rights. Ensure that no existing systems prevent these accounts and groups from functioning. For example, if you have scripts that delete user accounts not in a whitelist, add these accounts to the list of permitted accounts. Cloudera Manager, CDH, and managed services create and use the following accounts and groups:
Users and Groups

Component (Version)

 Unix User ID Groups Notes
Cloudera Manager (all versions) cloudera-scm cloudera-scm Cloudera Manager processes such as the Cloudera Manager Server and the monitoring roles run as this user.
The Cloudera Manager keytab file must be named  cmf.keytab since that name is hard-coded in Cloudera Manager. Note: Applicable to clusters managed by Cloudera Manager only.
Apache Accumulo (Accumulo 1.4.3 and higher) accumulo accumulo Accumulo processes run as this user.
Apache Avro   No special users.
Apache Flume (CDH 4, CDH 5) flume flume The sink that writes to HDFS as this user must have write privileges.
Apache HBase (CDH 4, CDH 5) hbase hbase The Master and the RegionServer processes run as this user.
HDFS (CDH 4, CDH 5) hdfs hdfs, hadoop The NameNode and DataNodes run as this user, and the HDFS root directory as well as the directories used for edit logs should be owned by it.
Apache Hive (CDH 4, CDH 5) hive hive

The HiveServer2 process and the Hive Metastore processes run as this user.

A user must be defined for Hive access to its Metastore DB (for example, MySQL or Postgres) but it can be any identifier and does not correspond to a Unix uid. This isjavax.jdo.option.ConnectionUserName in hive-site.xml.
Apache HCatalog (CDH 4.2 and higher, CDH 5) hive hive

The WebHCat service (for REST access to Hive functionality) runs as the hive user.
HttpFS (CDH 4, CDH 5) httpfs httpfs

The HttpFS service runs as this user. SeeHttpFS Security Configuration for instructions on how to generate the merged httpfs-http.keytab file.
Hue (CDH 4, CDH 5) hue hue

Hue services run as this user.
Hue Load Balancer (Cloudera Manager 5.5 and higher) apache apache The Hue Load balancer has a dependency on the apache2 package that uses the apache user name. Cloudera Manager does not run processes using this user ID.
Cloudera Impala (CDH 4.1 and higher, CDH 5) impala impala, hive Impala services run as this user.
Apache Kafka (Cloudera Distribution of Kafka 1.2.0) kafka kafka Kafka services run as this user.
Java KeyStore KMS (CDH 5.2.1 and higher) kms kms The Java KeyStore KMS service runs as this user.
Key Trustee KMS (CDH 5.3 and higher) kms kms The Key Trustee KMS service runs as this user.
Key Trustee Server (CDH 5.4 and higher) keytrustee keytrustee The Key Trustee Server service runs as this user.
Kudu kudu kudu Kudu services run as this user.
Llama (CDH 5) llama llama Llama runs as this user.
Apache Mahout   No special users.
MapReduce (CDH 4, CDH 5) mapred mapred, hadoop Without Kerberos, the JobTracker and tasks run as this user. The LinuxTaskController binary is owned by this user for Kerberos.
Apache Oozie (CDH 4, CDH 5) oozie oozie The Oozie service runs as this user.
Parquet   No special users.
Apache Pig   No special users.
Cloudera Search (CDH 4.3 and higher, CDH 5) solr solr The Solr processes run as this user.
Apache Spark (CDH 5) spark spark The Spark History Server process runs as this user.
Apache Sentry (CDH 5.1 and higher) sentry sentry The Sentry service runs as this user.
Apache Sqoop (CDH 4, CDH 5) sqoop sqoop This user is only for the Sqoop1 Metastore, a configuration option that is not recommended.
Apache Sqoop2 (CDH 4.2 and higher, CDH 5) sqoop2 sqoop, sqoop2 The Sqoop2 service runs as this user.
Apache Whirr   No special users.
YARN (CDH 4, CDH 5) yarn yarn, hadoop Without Kerberos, all YARN services and applications run as this user. The LinuxContainerExecutor binary is owned by this user for Kerberos.
Apache ZooKeeper (CDH 4, CDH 5) zookeeper zookeeper The ZooKeeper processes run as this user. It is not configurable.

Product Compatibility Matrix for Apache Accumulo

This matrix contains compatibility information across versions of Apache Accumulo, and CDH and Cloudera Manager. For detailed information on each release, see  Apache Accumulo documentation.
Product Lowest supported Cloudera Manager Version Lowest supported CDH Version Lowest supported Impala Version Lowest supported Search Version Integrated into CDH
Accumulo 1.7.2 Cloudera Manager 5.0.0 CDH 5.5.0 Not Supported Not Supported No
Accumulo 1.6.0 Cloudera Manager 5.0.0 CDH 4.6.0 - 4.x.x, CDH 5.1.0 Not Supported Not Supported No
Accumulo 1.4.4 Cloudera Manager 5.0.0 CDH 4.5.0 (Not for use with CDH 5) Not Supported Not Supported No
Accumulo 1.4.3 Cloudera Manager 5.0.0 CDH 4.3.0 (Not for use with CDH 5) Not Supported Not Supported No

Product Compatibility Matrix for Apache Impala (incubating)

This matrix contains compatibility information across versions of Impala and CDH/Cloudera Manager. For detailed information on each release, see the Impala documentation.

Product Supported Cloudera Manager Versions Supported CDH Versions Integrated into CDH
Impala 2.8.x (plus additional patches) for CDH 5.11.x

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.11.x CDH 5.11.x
Impala 2.8.x (plus a few minor patches) for CDH 5.10.x; although version string still says Impala 2.7

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.10.x CDH 5.10.x
Impala 2.7.x for CDH 5.9.x

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.9.x CDH 5.9.x
Impala 2.6.x for CDH 5.8.x

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.8.x CDH 5.8.x
Impala 2.5.x for CDH 5.7.x

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.7.x CDH 5.7.x
Impala 2.4.x for CDH 5.6.x

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.6.x CDH 5.6.x
Impala 2.3.x for CDH 5.5.x

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.5.x CDH 5.5.x
Impala 2.2.x for CDH 5.4.x

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.4.x CDH 5.4.x
Impala 2.2.0

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.4.0 CDH 5.4.0
Impala 2.1.8

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.3.10 CDH 5.3.10
Impala 2.1.7

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.3.9 CDH 5.3.9
Impala 2.1.6

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.3.8 CDH 5.3.8
Impala 2.1.5

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.3.6 CDH 5.3.6
Impala 2.1.4

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.3.4 and CDH 5.3.5 CDH 5.3.4 and CDH 5.3.5
Impala 2.1.3

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.3.3 CDH 5.3.3
Impala 2.1.2

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.3.2 CDH 5.3.2
Impala 2.1.1

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.3.1 CDH 5.3.1
Impala 2.1.0

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.3.0 CDH 5.3.0
Impala 2.0.5

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.2.6 CDH 5.2.6
Impala 2.0.4

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.2.5 CDH 5.2.5
Impala 2.0.3

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.2.4 CDH 5.2.4
Impala 2.0.2

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.2.3 CDH 5.2.3
Impala 2.0.1

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.2.1 CDH 5.2.1
Impala 2.0.0

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.2.0 CDH 5.2.0
Impala 1.4.4

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.1.5 CDH 5.1.5
Impala 1.4.3

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.1.4 CDH 5.1.4
Impala 1.4.2

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.1.3 CDH 5.1.3
Impala 1.4.1

Cloudera Manager 5.0.0 - 5.x.x

 CDH 5.1.2 CDH 5.1.2
Impala 1.4.0

Cloudera Manager 5.0.0 - 5.x.x; Recommended: Cloudera Manager 5.1.0

 CDH 5.1.0 CDH 5.1.0
Impala 1.3.3 Cloudera Manager 5.0.0 - 5.x.x CDH 5.0.5 CDH 5.0.5
Impala 1.3.2 Cloudera Manager 5.0.0 - 5.x.x CDH 5.0.4 CDH 5.0.4
Impala 1.3.1 Cloudera Manager 5.0.0 - 5.x.x CDH 5.0.1 - 5.0.x CDH 5.0.1
Impala 1.3.0 Cloudera Manager 5.0.0 - 5.x.x CDH 5.0.0 CDH 5.0.0

Product Compatibility Matrix for Cloudera Distribution of Apache Kafka

Cloudera Distribution of Apache Kafka is currently distributed as a package and in a parcel that is independent of the CDH parcel. The parcel integrates with Cloudera Manager using a Custom Service Descriptor (CSD).

For the latest documentation, see Kafka Documentation.

Product Feature Lowest Supported Cloudera Manager Version Supported CDH Versions Integrated into CDH
Kafka 2.1.x Sentry authorization Cloudera Manager 5.9.x CDH 5.9.x and higher No
Kafka 2.0.x Enhanced security Cloudera Manager 5.5.3 CDH 5.4.x and higher No
Kafka 1.4.x Distributed both as package and parcel Cloudera Manager 5.2.x CDH 5.4.x, 5.5.x, 5.6.x No
Kafka 1.3.x Includes Kafka Monitoring Cloudera Manager 5.2.x CDH 5.4.x, 5.5.x, 5.6.x No
Kafka 1.2.x   Cloudera Manager 5.2.x CDH 5.4.x, 5.5.x, 5.6.x No

Product Compatibility Matrix for Apache Kudu

Apache Kudu is currently distributed as a package and in a parcel that is independent of the CDH parcel. The parcel integrates with Cloudera Manager using a Custom Service Descriptor (CSD).

For the latest documentation, see the Kudu Documentation.

Product Feature Lowest Supported Cloudera Manager Version Supported CDH Versions Integrated into CDH
Kudu 1.3.0 / CDH 5.11.x Available as a CSD within Cloudera Manager. Cloudera Manager 5.11.0 CDH 5.11.x No
Kudu 1.2.0 / CDH 5.10.x Distributed both as package and parcel.

Kudu's first generally available (GA) release that is supported on Cloudera Manager and CDH 5.10.x clusters.

 Cloudera Manager 5.10.0 CDH 5.10.x No
Kudu 1.1.x (and lower) - Beta Public beta releases that are not commercially supported on CDH clusters. N/A N/A No

Product Compatibility Matrix for Cloudera Navigator

This matrix contains compatibility information across versions of Cloudera Navigator, Cloudera Manager, and CDH. For detailed information on each release, see  Cloudera Navigator documentation. Note:

Cloudera Navigator requires HiveServer2 for complete governance Hive queries. Cloudera Navigator does not capture audit events for queries that are run on HiveServer1/Hive CLI, and lineage is not captured for certain types of operations that are run on HiveServer1.

HiveServer1 and Hive CLI are deprecated in CDH 5. If you use Cloudera Navigator to capture auditing, lineage, and metadata for Hive operations, upgrade to HiveServer2 if you have not done so already.

Product Feature Lowest supported Cloudera Manager Version Lowest supported CDH Version Lowest supported Impala Version Lowest supported Search Version
Cloudera Navigator 2.10.x Auditing, Metadata, Analytics, and Security 5.11.0
  • Audit Component
    • HDFS, HBase - 4.0.0
    • Hue - 4.4.0, 5.5.0 for LDAP user operations
    • HiveServer2 - 4.2.0, 4.4.0 for operations denied due to lack of privileges.
    • Sentry - 5.1.0
  • Metadata Component
    • HDFS, HiveServer2, MapReduce, Oozie, Sqoop 1 - 4.4.0
    • Pig - 4.6.0
    • YARN - 5.0.0
    • Impala - 5.4.0
    • Spark - supported starting in 5.11.0
 Impala 1.2.1 with CDH 4.4.0 CDH 5.4.0
Cloudera Navigator 2.9.x Auditing, Metadata, Analytics, and Security 5.10.0
  • Audit Component
    • HDFS, HBase - 4.0.0
    • Hue - 4.4.0, 5.5.0 for LDAP user operations
    • HiveServer2 - 4.2.0, 4.4.0 for operations denied due to lack of privileges.
    • Sentry - 5.1.0
  • Metadata Component
    • HDFS, HiveServer2, MapReduce, Oozie, Sqoop 1 - 4.4.0
    • Pig - 4.6.0
    • YARN - 5.0.0
    • Impala - 5.4.0
    • Spark (available but unsupported) - 5.4.0
 Impala 1.2.1 with CDH 4.4.0 CDH 5.4.0
Cloudera Navigator 2.8.x Auditing, Metadata, Analytics, and Security 5.9.0
  • Audit Component
    • HDFS, HBase - 4.0.0
    • Hue - 4.4.0, 5.5.0 for LDAP user operations
    • HiveServer2 - 4.2.0, 4.4.0 for operations denied due to lack of privileges.
    • Sentry - 5.1.0
  • Metadata Component
    • HDFS, HiveServer2, MapReduce, Oozie, Sqoop 1 - 4.4.0
    • Pig - 4.6.0
    • YARN - 5.0.0
    • Impala - 5.4.0
    • Spark (available but unsupported) - 5.4.0
 Impala 1.2.1 with CDH 4.4.0 CDH 5.4.0
Cloudera Navigator 2.7.x Auditing, Metadata, Analytics, and Security 5.8.0
  • Audit Component
    • HDFS, HBase - 4.0.0
    • Hue - 4.4.0, 5.5.0 for LDAP user operations
    • Hive - 4.2.0, 4.4.0 for operations denied due to lack of privileges.
    • Sentry - 5.1.0
  • Metadata Component
    • HDFS, Hive, MapReduce, Oozie, Sqoop 1 - 4.4.0
    • Pig - 4.6.0
    • YARN - 5.0.0
    • Impala - 5.4.0
    • Spark (available but unsupported)- 5.4.0
 Impala 1.2.1 with CDH 4.4.0 CDH 5.4.0
Cloudera Navigator 2.6.x Auditing, Metadata, Analytics, and Security 5.7.0
  • Audit Component
    • HDFS, HBase - 4.0.0
    • Hue - 4.4.0, 5.5.0 for LDAP user operations
    • Hive - 4.2.0, 4.4.0 for operations denied due to lack of privileges.
    • Sentry - 5.1.0
  • Metadata Component
    • HDFS, Hive, MapReduce, Oozie, Sqoop 1 - 4.4.0
    • Pig - 4.6.0
    • YARN - 5.0.0
    • Impala - 5.4.0
    • Spark (available but unsupported)- 5.4.0
 Impala 1.2.1 with CDH 4.4.0 CDH 5.4.0
Cloudera Navigator 2.5.x Auditing, Metadata, Analytics, and Security 5.6.0
  • Audit Component
    • HDFS, HBase - 4.0.0
    • Hue - 4.2.0
    • Hive - 4.2.0, 4.4.0 for operations denied due to lack of privileges.
    • Sentry - 5.1.0
  • Metadata Component
    • HDFS, Hive, Impala, MapReduce, Oozie, Sqoop 1 - 4.4.0
    • Pig - 4.6.0
    • YARN - 5.0.0
    • Impala and Spark (available but unsupported)- 5.4.0
 Impala 1.2.1 with CDH 4.4.0 CDH 5.4.0
Cloudera Navigator 2.4.x Auditing, Metadata, Analytics, and Security 5.5.0
  • Audit Component
    • HDFS, HBase - 4.0.0
    • Hue - 4.2.0
    • Hive - 4.2.0, 4.4.0 for operations denied due to lack of privileges.
    • Sentry - 5.1.0
  • Metadata Component
    • HDFS, Hive, Impala, MapReduce, Oozie, Sqoop 1 - 4.4.0
    • Pig - 4.6.0
    • YARN - 5.0.0
    • Impala and Spark (available but unsupported)- 5.4.0
 Impala 1.2.1 with CDH 4.4.0 CDH 5.4.0
Cloudera Navigator 2.3.x Auditing, Metadata, and Security 5.4.0
  • Audit Component
    • HDFS, HBase - 4.0.0
    • Hue - 4.2.0
    • Hive - 4.2.0, 4.4.0 for operations denied due to lack of privileges.
    • Sentry - 5.1.0
  • Metadata Component
    • HDFS, Hive, Impala, MapReduce, Oozie, Sqoop 1 - 4.4.0
    • Pig - 4.6.0
    • YARN - 5.0.0
    • Impala and Spark (available but unsupported)- 5.4.0
 Impala 1.2.1 with CDH 4.4.0 CDH 5.4.0
Cloudera Navigator 2.2.x Auditing, Metadata, and Security 5.3.0
  • Audit Component
    • HDFS, HBase - 4.0.0
    • Hue - 4.2.0
    • Hive - 4.2.0, 4.4.0 for operations denied due to lack of privileges.
    • Sentry - 5.1.0
  • Metadata Component
    • HDFS, Hive, Oozie, MapReduce, Sqoop 1 - 4.4.0
    • Pig - 4.6.0
    • YARN - 5.0.0
 Impala 1.2.1 with CDH 4.4.0 Not Supported
Cloudera Navigator 2.1.x Auditing, Metadata, and Security 5.2.0
  • Audit Component
    • HDFS, HBase - 4.0.0
    • Hue - 4.2.0
    • Hive - 4.2.0, 4.4.0 for operations denied due to lack of privileges.
    • Sentry - 5.1.0
  • Metadata Component
    • HDFS, Hive, Oozie, MapReduce, Sqoop 1 - 4.4.0
    • Pig - 4.6.0
    • YARN - 5.0.0
 Impala 1.2.1 with CDH 4.4.0 Not Supported
Cloudera Navigator 2.0.1 Auditing, Metadata, and Security 5.1.2
  • Audit Component
    • HDFS, HBase - 4.0.0
    • Hue - 4.2.0
    • Hive - 4.2.0, 4.4.0 for operations denied due to lack of privileges.
    • Sentry - 5.1.0
  • Metadata Component
    • HDFS, Hive, Oozie, MapReduce, Sqoop 1 - 4.4.0
    • Pig - 4.6.0
    • YARN - 5.0.0
 Impala 1.2.1 with CDH 4.4.0 Not Supported
Cloudera Navigator 2.0.0 Auditing, Metadata, and Security 5.1.0
  • Audit Component
    • HDFS, HBase - 4.0.0
    • Hue - 4.2.0
    • Hive - 4.2.0, 4.4.0 for operations denied due to lack of privileges.
    • Sentry - 5.1.0
  • Metadata Component
    • HDFS, Hive, Oozie, MapReduce, Sqoop 1 - 4.4.0
    • Pig - 4.6.0
    • YARN - 5.0.0
 Impala 1.2.1 with CDH 4.4.0 Not Supported
Cloudera Navigator 1.2.x Auditing 5.0.0
  • HDFS, HBase - 4.0.0
  • Hue - 4.2.0
  • Hive - 4.2.0, 4.4.0 for operations denied due to lack of privileges.
 Impala 1.2.1 with CDH 4.4.0 Not Supported
Metadata (2.0 beta 2) 5.0.0
  • HDFS, Hive, Oozie, MapReduce, Sqoop 1 - 4.4.0
  • Pig - 4.6.0
 Not Supported Not Supported

Cloudera Navigator Supported Databases

Cloudera Navigator supports the following databases:
  • Maria DB 5.5, 10
  • MySQL 5.1, 5.5, 5.6, 5.7
  • Oracle 11gR2 and 12c
  • PostgreSQL 8.1, 8.3, 8.4, 9.1, 9.2, 9.3, 9.4

Cloudera Navigator Supported Browsers

The Cloudera Navigator UI supports the following browsers:
  • Mozilla Firefox 24 and higher
  • Google Chrome 36 and higher
  • Internet Explorer 11
  • Safari 5 and higher

Cloudera Navigator Supported CDH and Managed Service Versions

This section describes the CDH and managed service versions supported by the Cloudera Navigator auditing and metadata features.

Cloudera Navigator Auditing
This section describes the audited operations and service versions supported by Cloudera Navigator auditing.
Component Operations (For details, see Cloudera Navigator Auditing). Minimum Supported Service Version
HDFS
  • Operations that access or modify a file's or directory's data or metadata
  • Operations denied due to lack of privileges
 CDH 4.0.0
HBase
  • In CDH versions less than 4.2.0, for grant and revoke operations, the operation in log events is ADMIN
  • In simple authentication mode, if the HBase Secure RPC Engine property is false (the default), the username in log events isUNKNOWN. To see a meaningful username:
    1. Click the HBase service.
    2. Click the Configuration tab.
    3. Select Service-wide > Security.
    4. Set the HBase Secure RPC Engine property to true.
    5. Save the change and restart the service.
 CDH 4.0.0
Hive
  • Operations (except grant, revoke, and metadata access only) sent to HiveServer2
  • Operations denied due to lack of privileges
Limitations:
  • Actions taken against Hive using the Hive CLI are not audited. Therefore if you have enabled auditing you should disable the Hive CLI to prevent actions against Hive that are not audited.
  • In simple authentication mode, the username in log events is the username passed in the HiveServer2 connect command. If you do not pass a username in the connect command, the username is log events is anonymous.
 CDH 4.2.0, CDH 4.4.0 for operations denied due to lack of privileges.
Hue
  • Operations (except grant, revoke, and metadata access only) sent through the Beeswax Server
 CDH 4.4.0
  • User operations such as log in, log out, add and remove user, add and remove LDAP group, add and remove user from LDAP group
 CDH 5.5.0
Impala
  • Queries denied due to lack of privileges
  • Queries that pass analysis
 Impala 1.2.1 with CDH 4.4.0
Navigator Metadata Server
  • Viewing and changing audit reports
  • Viewing and changing authorization configurations
  • Viewing and changing metadata
  • Viewing and changing policies
  • Viewing and changing saved searches
 Cloudera Navigator 2.3
Sentry
  • Operations sent to the HiveServer2 and Hive Metastore Server roles and Impala service
  • Adding and deleting roles, assigning roles to groups and removing roles from groups, creating and deleting privileges, granting and revoking privileges
  • Operations denied due to lack of privileges
You do not directly configure the Sentry service for auditing. Instead, when you configure the Hive and Impala services for auditing, grant, revoke, and metadata operations appear in the Hive or Impala service audit logs.		 CDH 5.1.0
Solr
  • Index creation and deletion
  • Schema and configuration file modification
  • Index, service, document tag access
 CDH 5.4.0
Cloudera Navigator Metadata
This section describes the CDH and managed service versions supported by the Cloudera Navigator metadata feature.
Component Minimum Supported Version
HDFS. However, federated HDFS is not supported. CDH 4.4.0
Hive CDH 4.4.0
Impala CDH 5.4.0
MapReduce CDH 4.4.0
Oozie. Supported actions:
  • 2.4 - map-reduce, pig, hive, hive2, sqoop
  • 2.3 and lower - map-reduce, pig, hive, sqoop
 CDH 4.4.0
Pig CDH 4.6.0
Spark CDH 5.4.0
Sqoop 1. All Cloudera connectors are supported. CDH 4.4.0
YARN CDH 5.0.0

Product Compatibility Matrix for Cloudera Navigator Encryption

Cloudera Navigator encryption comprises several components. See Cloudera Navigator Data Encryption Overview for more information on the components, concepts, and architecture involved in encrypting data.

Although the version numbers differ, Cloudera Navigator encryption component releases are generally coordinated with Cloudera Enterprise. See the following table for information on which component versions correspond with a given Cloudera Enterprise release:

Cloudera Navigator Encryption Components Release Versions
Cloudera Enterprise Release Cloudera Navigator Key Trustee Server Version Key Trustee KMS Version Cloudera Navigator Key HSM Version Cloudera Navigator Encrypt Version
5.11.x 5.11.x 5.11.x 1.9.x 3.12.x
5.10.x 5.10.x 5.10.x None 3.11.x
5.9.x 5.9.x 5.9.x 1.8.x None
5.8.x 5.8.x 5.8.x 1.7.x 3.10.x
5.7.x 5.7.x 5.7.x 1.6.x 3.9.x
5.6.x None None None None
5.5.x 5.5.x 5.5.x 1.5.x 3.8.x
5.4.x 5.4.x 5.4.x 1.4.x 3.7.x
5.3.x 3.8.x 5.3.x 1.3.x 3.6.x

See below for the individual compatibility matrices for each component:

  • Cloudera Navigator Key Trustee Server
  • Key Trustee KMS
  • Cloudera Navigator Key HSM
  • Cloudera Navigator Encrypt

Cloudera Navigator Key Trustee Server

Because of a change in the ports used by Key Trustee Server, Navigator Encrypt versions lower than 3.7 and Key Trustee KMS versions lower than 5.4 are not supported in Key Trustee Server 5.4 and higher.

Cloudera Navigator Key Trustee Server Compatibility Matrix
Cloudera Navigator Key Trustee Server Version Supported Operating Systems Lowest Supported Cloudera Manager Version Lowest Supported Cloudera Navigator Key HSM Versions Supported Key Trustee KMS Versions Supported Cloudera Navigator Encrypt Versions
5.11.x
  • RHEL and CentOS:6.4, 6.5, 6.6, 6.7, 6.8, 7.1, 7.2, 7.3
  • Oracle Enterprise Linux: 6.7, 6.8, 7.1, 7.2, 7.3
 5.11.x 1.3.x 5.4.x, 5.5.x, 5.7.x, 5.8.x, 5.9.x, 5.10.x, 5.11.x 3.7.x, 3.8.x, 3.9.x, 3.10.x, 3.11.x, 3.12.x
5.10.x
  • RHEL and CentOS:6.4, 6.5, 6.6, 6.7, 6.8, 7.1, 7.2, 7.3
  • Oracle Enterprise Linux: 6.7, 6.8, 7.1, 7.2, 7.3
 5.10.x 1.3.x 5.4.x, 5.5.x, 5.7.x, 5.8.x, 5.9.x, 5.10.x 3.7.x, 3.8.x, 3.9.x, 3.10.x, 3.11.x, 3.12.x
5.9.x
  • RHEL and CentOS:6.4, 6.5, 6.6, 6.7, 6.8, 7.1, 7.2
  • Oracle Enterprise Linux: 6.7, 6.8, 7.1, 7.2
 5.9.x 1.3.x 5.4.x, 5.5.x, 5.7.x, 5.8.x, 5.9.x 3.7.x, 3.8.x, 3.9.x, 3.10.x, 3.11.x, 3.12.x
5.8.x
  • RHEL and CentOS:6.4, 6.5, 6.6, 6.7, 7.1, 7.2
  • Oracle Enterprise Linux: 6.7, 7.1, 7.2
 5.8.x 1.3.x 5.4.x, 5.5.x, 5.7.x, 5.8.x 3.7.x, 3.8.x, 3.9.x, 3.10.x, 3.11.x, 3.12.x
5.7.x
  • RHEL and CentOS:6.4, 6.5, 6.6, 6.7, 7.1, 7.2
  • Oracle Enterprise Linux: 6.7, 7.1, 7.2
 5.7.x 1.3.x 5.4.x, 5.5.x, 5.7.x 3.7.x, 3.8.x, 3.9.x, 3.10.x, 3.11.x, 3.12.x
5.5.x
  • RHEL and CentOS:6.4, 6.5, 6.6, 6.7, 7.1
  • Oracle Enterprise Linux: 6.7, 7.1, 7.2
 5.5.x 1.3.x 5.4.x, 5.5.x, 5.7.x 3.7.x, 3.8.x, 3.9.x, 3.10.x, 3.11.x, 3.12.x
5.4.x
  • RHEL and CentOS:6.4, 6.5, 6.6
 5.4.x 1.3.x 5.4.x, 5.5.x, 5.7.x 3.7.x, 3.8.x, 3.9.x, 3.10.x, 3.11.x, 3.12.x
3.8.x
  • RHEL and CentOS:6.4, 6.5
 Not supported 1.3.x 5.3.x 3.6.x

Key Trustee KMS

Key Trustee KMS Compatibility Matrix
Key Trustee KMS Version Supported Operating Systems Supported Key Trustee Server Versions Lowest Supported Cloudera Manager Version Supported CDH Versions
5.11.x
  • RHEL and CentOS: 5.7, 5.10, 6.4, 6.5, 6.6, 6.7, 6.8, 7.1, 7.2, 7.3
  • Oracle Enterprise Linux: 5.7, 5.10, 5.11, 6.4, 6.5, 6.6, 6.7, 6.8, 7.1, 7.2, 7.3
  • SLES: 11 SP2, 11 SP3, 11 SP4, 12 SP1, 12 SP2
  • Debian: 7.1, 7.8, 8.2, 8.4
  • Ubuntu: 12.04, 14.04, 16.04
 5.4.x, 5.5.x, 5.7.x, 5.8.x, 5.9.x, 5.10.x, 5.11.x 5.11.x 5.3.x, 5.4.x, 5.5.x, 5.7.x, 5.8.x, 5.9.x, 5.10.x, 5.11.x
5.10.x
  • RHEL and CentOS: 5.7, 5.10, 6.4, 6.5, 6.6, 6.7, 6.8, 7.1, 7.2, 7.3
  • Oracle Enterprise Linux: 5.7, 5.10, 5.11, 6.4, 6.5, 6.6, 6.7, 6.8, 7.1, 7.2, 7.3
  • SLES: 11 SP2, 11 SP3, 11 SP4, 12 SP1
  • Debian: 7.1, 7.8, 8.2, 8.4
  • Ubuntu: 12.04, 14.04
 5.4.x, 5.5.x, 5.7.x, 5.8.x, 5.9.x, 5.10.x 5.10.x 5.3.x, 5.4.x, 5.5.x, 5.7.x, 5.8.x, 5.9.x, 5.10.x
5.9.x
  • RHEL and CentOS: 5.7, 5.10, 6.4, 6.5, 6.6, 6.7, 6.8, 7.1, 7.2
  • Oracle Enterprise Linux: 5.7, 5.10, 5.11, 6.4, 6.5, 6.6, 6.7, 6.8, 7.1, 7.2
  • SLES: 11 SP2, 11 SP3, 11 SP4, 12 SP1
  • Debian: 7.1, 7.8, 8.2, 8.4
  • Ubuntu: 12.04, 14.04
 5.4.x, 5.5.x, 5.7.x, 5.8.x, 5.9.x 5.9.x 5.3.x, 5.4.x, 5.5.x, 5.7.x, 5.8.x, 5.9.x
5.8.x
  • RHEL and CentOS: 5.7, 5.10, 6.4, 6.5, 6.6, 6.7, 7.1, 7.2
  • Oracle Enterprise Linux: 5.7, 5.10, 5.11, 6.4, 6.5, 6.6, 6.7, 7.1, 7.2
  • SLES: 11 SP2, 11 SP3, 11 SP4
  • Debian: 7.1, 7.8, 8.2
  • Ubuntu: 12.04, 14.04
 5.4.x, 5.5.x, 5.7.x, 5.8.x 5.8.x 5.3.x, 5.4.x, 5.5.x, 5.7.x, 5.8.x
5.7.x
  • RHEL and CentOS: 5.7, 5.10, 6.4, 6.5, 6.6, 6.7, 7.1, 7.2
  • Oracle Enterprise Linux: 5.7, 5.10, 5.11, 6.4, 6.5, 6.6, 6.7, 7.1, 7.2
  • SLES: 11 SP2, 11 SP3, 11 SP4
  • Debian: 7.1, 7.8
  • Ubuntu: 12.04, 14.04
 5.4.x, 5.5.x, 5.7.x 5.7.x 5.3.x, 5.4.x, 5.5.x, 5.7.x
5.5.x
  • RHEL and CentOS: 5.7, 5.10, 6.4, 6.5, 6.6, 6.7, 7.1
  • Oracle Enterprise Linux: 5.7, 5.10, 6.4, 6.5, 6.6, 6.7, 7.1
  • SLES: 11 SP2, 11 SP3
  • Debian: 7.1
  • Ubuntu: 12.04, 14.04
 5.4.x, 5.5.x 5.5.x 5.3.x, 5.4.x, 5.5.x
5.4.x
  • RHEL and CentOS: 5.7, 5.10, 6.4, 6.5, 6.6
  • Oracle Enterprise Linux: 5.7, 5.10, 6.4, 6.5, 6.6
  • SLES: 11 SP2, 11 SP3
  • Debian: 7.1
  • Ubuntu: 12.04, 14.04
 5.4.x 5.4.x 5.3.x, 5.4.x
5.3.x
  • RHEL and CentOS: 5.7, 6.4, 6.5
  • Oracle Enterprise Linux: 5.7, 6.4, 6.5
  • SLES: 11 SP2, 11 SP3
  • Debian: 7.1
  • Ubuntu: 12.04, 14.04
 3.8.x 5.3.x 5.3.x

Cloudera Navigator Key HSM

Cloudera Navigator Key HSM must be installed on the same host as Key Trustee Server. Although Key HSM is compatible across all versions of Key Trustee Server, Cloudera strongly recommends also upgrading Key HSM after you upgrade Key Trustee Server. See Installing Cloudera Navigator Key HSM and Upgrading Cloudera Navigator Key HSM for more information.

Cloudera Navigator Key HSM Compatibility Matrix
Cloudera Navigator Key HSM Version Supported Operating Systems Lowest Supported Key Trustee Server Version
1.9.x
  • RHEL and CentOS: 6.4, 6.5, 6.6, 6.7, 6.8, 7.1, 7.2
 3.8.x
1.8.x
  • RHEL and CentOS: 6.4, 6.5, 6.6, 6.7, 6.8, 7.1, 7.2
 3.8.x
1.7.x
  • RHEL and CentOS: 6.4, 6.5, 6.6, 6.7, 7.1, 7.2
 3.8.x
1.6.x
  • RHEL and CentOS: 6.4, 6.5, 6.6, 6.7, 7.1, 7.2
 3.8.x
1.5.x
  • RHEL and CentOS: 6.4, 6.5, 6.6, 6.7, 7.1
 3.8.x
1.4.x
  • RHEL and CentOS: 6.4, 6.5, 6.6
 3.8.x
1.3.x
  • RHEL and CentOS: 6.4, 6.5
 3.8.x

Cloudera Navigator Encrypt

Cloudera Navigator Encrypt Compatibility Matrix
Cloudera Navigator Encrypt Version Supported Operating Systems Supported Key Trustee Server Versions
3.12.x
  • RHEL and CentOS: 5.7, 5.10, 6.4, 6.5, 6.6, 6.7, 6.8, 7.1, 7.2
  • Oracle Enterprise Linux:6.4, 6.5, 6.6, 6.7, 7.1
  • SLES: 11 SP2, 11 SP3, 11 SP4, 12 SP1
  • Debian: 7.1, 7.8
  • Ubuntu: 12.04, 14.04, 14.04.3, 16.04
 5.4.x, 5.5.x, 5.7.x, 5.8.x, 5.9.x, 5.10.x, 5.11.x
3.11.x
  • RHEL and CentOS: 5.7, 5.10, 6.4, 6.5, 6.6, 6.7, 6.8, 7.1, 7.2
  • Oracle Enterprise Linux:6.4, 6.5, 6.6, 6.7, 7.1
  • SLES: 11 SP2, 11 SP3, 11 SP4, 12 SP1
  • Debian: 7.1, 7.8
  • Ubuntu: 12.04, 14.04, 14.04.3
 5.4.x, 5.5.x, 5.7.x, 5.8.x, 5.9.x, 5.10.x, 5.11.x
3.10.x
  • RHEL and CentOS: 5.7, 5.10, 6.4, 6.5, 6.6, 6.7, 6.8, 7.1, 7.2
  • Oracle Enterprise Linux:6.4, 6.5, 6.6, 6.7, 7.1
  • SLES: 11 SP2, 11 SP3, 11 SP4
  • Debian: 7.1, 7.8
  • Ubuntu: 12.04, 14.04, 14.04.3
 5.4.x, 5.5.x, 5.7.x, 5.8.x, 5.9.x, 5.10.x, 5.11.x
3.9.x
  • RHEL and CentOS: 5.7, 5.10, 6.4, 6.5, 6.6, 6.7, 7.1, 7.2
  • Oracle Enterprise Linux:6.4, 6.5, 6.6, 6.7, 7.1
  • SLES: 11 SP2, 11 SP3, 11 SP4
  • Debian: 7.1, 7.8
  • Ubuntu: 12.04, 14.04, 14.04.3
 5.4.x, 5.5.x, 5.7.x, 5.8.x, 5.9.x, 5.10.x, 5.11.x
3.8.x
  • RHEL and CentOS: 5.7, 5.10, 6.4, 6.5, 6.6, 6.7, 7.1
  • Oracle Enterprise Linux:6.4, 6.5, 6.6, 6.7, 7.1
  • SLES: 11 SP2, 11 SP3
  • Debian: 7.1
  • Ubuntu: 12.04, 14.04
 5.4.x, 5.5.x, 5.7.x, 5.8.x, 5.9.x, 5.10.x, 5.11.x
3.7.x
  • RHEL and CentOS: 5.7, 5.10, 6.4, 6.5, 6.6
  • Oracle Enterprise Linux:6.4, 6.5, 6.6
  • SLES: 11 SP2, 11 SP3
  • Debian: 7.1
  • Ubuntu: 12.04, 14.04
 5.4.x, 5.5.x, 5.7.x, 5.8.x, 5.9.x, 5.10.x, 5.11.x
3.6.x
  • RHEL and CentOS: 5.7, 6.4, 6.5
  • Oracle Enterprise Linux:6.4, 6.5
  • SLES: 11 SP2, 11 SP3
  • Debian: 7.1
  • Ubuntu: 12.04, 14.04
 3.8.x

Product Compatibility Matrix for Apache Sentry

Sentry enables role-based, fine-grained authorization for HiveServer2 and provides classic database-style authorization for Hive, Cloudera Impala and Cloudera Search. You can use either the Sentry service (introduced in Cloudera Manager 5.1.0 and CDH 5.1.0) or the policy file approach to secure your data.

Note: It's possible for a single cluster to use both the Sentry service (for Hive and Impala) and Sentry policy files (for Solr).
Product Feature Lowest supported Cloudera Manager Version Lowest supported CDH Version Lowest supported Impala Version Lowest supported Search Version Integrated into CDH
Apache Sentry Sentry Service Cloudera Manager 5.1.0 CDH 5.1.0 Impala 1.4.0 for CDH 5 Search for CDH 5.8.0 Yes
Policy File Cloudera Manager 4.7.0 CDH 4.3.0 Impala 1.2.1 Search 1.1.0 Yes; Starting CDH 4.4.0

Support for Other Filesystems

Filesystems Lowest Release Supported
Amazon S3 (s3a) Apache Sentry for CDH 5.8
Amazon RDS Apache Sentry for CDH 5.9

Product Compatibility Matrix for Apache Spark

Spark is a fast, general engine for large-scale data processing. For installation and configuration instructions, see Spark Installation. To see new features introduced with each release, refer to the CDH 5 Release Notes.

Since Spark has been integrated into the CDH package, its compatibility with Cloudera Manager and CDH depends on the CDH 5.x.x release it is shipped with.

Product Lowest Supported Cloudera Manager Version Lowest Supported CDH Version Lowest supported Impala Version Lowest supported Search Version Integrated into CDH
Apache Spark 1.6.x Cloudera Manager 5.7.x CDH 5.7.x Not Supported Not Supported CDH 5.7.0
Apache Spark 1.5.x Cloudera Manager 5.5.x and Cloudera Manager 5.6.x CDH 5.5.x and CDH 5.6.x Not Supported Not Supported CDH 5.5.0 and CDH 5.6.0
Apache Spark 1.3.x Cloudera Manager 5.4.x CDH 5.4.x Not Supported Not Supported CDH 5.4.0
Apache Spark 1.2.x Cloudera Manager 5.3.x CDH 5.3.x Not Supported Not Supported CDH 5.3.0
Apache Spark 1.1.x Cloudera Manager 5.2.x CDH 5.2.x Not Supported Not Supported CDH 5.2.0
Apache Spark 1.0.x Cloudera Manager 5.1.x CDH 5.1.x Not Supported Not Supported CDH 5.1.0
Apache Spark 0.9.x Cloudera Manager 5.0.x CDH 5.0.x Not Supported Not Supported CDH 5.0.0

Product Compatibility for EMC Isilon

For compatibility with Cloudera Manager Replication and Snapshot features, see Product Compatibility Matrix for Backup and Disaster Recovery. For information on using Isilon with CDH, see Using CDH with Isilon Storage.

CDH Version Isilon OneFS Version
5.11
  • 8.0.0.4
  • 8.0.0.x releases that are higher than 8.0.0.4.
5.10
  • 8.0.0.3 (with patch 184679)Note: The patch fixes a bug that prevented high availability services from working correctly in a Kerberized environment.
  • 8.0.0.4
  • 8.0.0.x releases that are higher than 8.0.0.4.
5.9
  • 8.0.0.2
  • 8.0.0.3Note: There is a bug in versions 8.0.0.1, 8.0.0.2 and 8.0.0.3 that prevents high availability services from working correctly in a Kerberized environment.
  • 8.0.0.4
  • 8.0.0.x releases that are higher than 8.0.0.4.
5.8 8.0.0.x
5.4.4 and higher 7.2.0.3 and higher

Cloudera recommends 7.2.1.1

Product Compatibility Matrix for Backup and Disaster Recovery

This matrix contains compatibility information across features of Cloudera Manager Backup and Disaster Recovery and CDH and Cloudera Manager.
Product Feature Lowest supported Cloudera Manager Version Lowest supported CDH Version Supported Services
Backup & Disaster Recovery Replication Cloudera Manager 4.5.0 CDH 4.0.1 HDFS, Hive, Impala
Replication to and from Amazon S3 Cloudera Manager 5.9.0 CDH 5.9.0 HDFS, Hive, Impala
Snapshots Cloudera Manager 5.0.0 CDH 5.0.0 HDFS, Hive, Impala
Snapshots fromIsilon storage Not Supported Not Supported HDFS, Hive, Impala
The tables below list the supported and unsupported replication scenarios:

Supported Replication Scenarios

In Cloudera Manager 5, replication is supported between CDH 5 or CDH 4 clusters. The following tables describe support for HDFS and Hive/Impala replication.

Service Source Destination
  Cloudera Manager Version CDH Version Comment Cloudera Manager Version CDH Version Comment
HDFS, Hive 4 4   5 4  
HDFS, Hive 4 4.4 or higher   5 5  
HDFS, Hive 5 5 TLS/SSL enabled on Hadoop services 5 5 TLS/SSL enabled on Hadoop services
HDFS, Hive 5 5 TLS/SSL enabled on Hadoop services 5 5 TLS/SSL notenabled on Hadoop services
HDFS, Hive 5 5.1 TLS/SSL enabled on Hadoop services and YARN 5 4 or 5  
HDFS, Hive 5 4   4.7.3 or higher 4  
HDFS, Hive 5 4   5 4  
HDFS, Hive 5 5   5 5  
HDFS, Hive 5 5   5 4.4 or higher  
HDFS, Hive 5.7 5.7, with Isilon storage See Supported Replication Scenarios for Clusters using Isilon Storage. 5.7 5.7, with Isilon storage See Supported Replication Scenarios for Clusters using Isilon Storage.
HDFS, Hive 5.7 5.7 5.7 5.7, with Isilon storage
HDFS, Hive 5.7 5.7, with Isilon storage 5.7 5.7
HDFS, Hive 5.8 5.8, with or without Isilon Storage
  • Kerberos can be enabled
  • SeeSupported Replication Scenarios for Clusters using Isilon Storage.
 5.8 5.8, with or without Isilon Storage
  • Kerberos can be enabled
  • SeeSupported Replication Scenarios for Clusters using Isilon Storage.

Unsupported Replication Scenarios

Note: If you are using Isilon storage for CDH, see  Supported Replication Scenarios for Clusters using Isilon Storage.
Service Source Destination
  Cloudera Manager Version CDH Version Comment Cloudera Manager Version CDH Version Comment
Any 4 or 5 4 or 5 Kerberos enabled. 4 or 5 4 or 5 Kerberos not enabled
Any 4 or 5 4 or 5 Kerberos not enabled. 4 or 5 4 or 5 Kerberos enabled
HDFS, Hive 4 or 5 4 Where the replicated data includes a directory that contains a large number of files or subdirectories (several hundred thousand entries), causing out-of-memory errors.

To work around this issue, follow this procedure.

 4 or 5 5  
Hive 4 or 5 4 Replicate HDFS Files is disabled. 4 or 5 4 or 5 Over-the-wire encryption is enabled.
Hive 4 or 5 4 Replication can fail if the NameNode fails over during replication. 4 or 5 5, with high availability enabled Replication can fail if the NameNode fails over during replication.
Hive 4 or 5 4 The clusters use different Kerberos realms. 4 or 5 5 An older JDK is deployed. (Upgrade the CDH 4 cluster to use JDK 7 or JDK6u34 to work around this issue.)
Any 4 or 5 4 SSL enabled on Hadoop services. 4 or 5 4 or 5  
Hive 4 or 5 4.2 or higher If the Hive schema contain views. 4 or 5 4  
HDFS 4 or 5 4, with high availability enabled Replications fail if NameNode failover occurs during replication. 4 or 5 5, without high availability Replications fail if NameNode failover occurs during replication.
HDFS 4 or 5 4 or 5 Over the wire encryption is enabled. 4 or 5 4  
HDFS 4 or 5 5 Clusters where there are URL-encoding characters such as % in file and directory names. 4 or 5 4  
Hive 4 or 5 4 or 5 Over the wire encryption is enabled andReplicate HDFS Files is enabled. 4 or 5 4  
Hive 4 or 5 4 or 5 From one cluster to the same cluster. 4 or 5 4 or 5 From one cluster to the same cluster.
HDFS, Hive 4 or 5 5 Where the replicated data includes a directory that contains a large number of files or subdirectories (several hundred thousand entries), causing out-of-memory errors.

To work around this issue, follow this procedure.

 4 or 5 4  
HDFS 4 or 5 5 The clusters use different Kerberos realms. 4 or 5 4 An older JDK is deployed. (Upgrade the CDH 4 cluster to use JDK 7 or JDK6u34 to work around this issue.)
Hive 4 or 5 5 Replicate HDFS Files is enabled and the clusters use different Kerberos realms. 4 or 5 4 An older JDK is deployed. (Upgrade the CDH 4 cluster to use JDK 7 or JDK6u34 to work around this issue.)
Any 4 or 5 5 SSL enabled on Hadoop services and YARN. 4 or 5 4 or 5  
Any 4 or 5 5 SSL enabled on Hadoop services. 4 or 5 4  
HDFS 4 or 5 5, with high availability enabled Replications fail if NameNode failover occurs during replication. 4 or 5 4, without high availability Replications fail if NameNode failover occurs during replication.
HDFS, Hive 5 5   4 4  
Hive 5.2 5.2 or lower Replication of Impala UDFs is skipped. 4 or 5 4 or 5  

Supported Replication Scenarios for Clusters using Isilon Storage

Note the following when scheduling replication jobs for clusters that use Isilon storage:
  • As of CDH 5.8 and higher, Replication is supported for clusters using Kerberos and Isilon storage on the source or destination cluster, or both. See Configuring Replication with Kerberos and Isilon. Replication between clusters using Isilon storage and Kerberos is not supported in CDH 5.7.
  • Make sure that the hdfs user is a superuser in the Isilon system. If you specify alternate users with theRun As option when creating replication schedules, those users must also be superusers.
  • Cloudera recommends that you use the Isilon root user for replication jobs. (Specify root in the Run Asfield when creating replication schedules.)
  • Select the Skip checksum checks property when creating replication schedules.
  • Clusters that use Isilon storage do not support snapshots. Snapshots are used to ensure data consistency during replications in scenarios where the source files are being modified. Therefore, when replicating from an Isilon cluster, Cloudera recommends that you do not replicate Hive tables or HDFS files that could be modified before the replication completes.

See Using CDH with Isilon Storage.

Supported Configurations with Virtualization and Cloud Platforms

This section lists supported cloud and virtualization platforms for deploying Cloudera software. The linked reference architectures are not replacements for statements of support above, but are guides to assist with deployment and sizing options.

Amazon Web Services

For information on deploying Cloudera software on a Amazon Web Services (AWS) cloud infrastructure, see the Cloudera Enterprise Reference Architecture for AWS Deployments.

Google Cloud Platform

For information on deploying Cloudera software on a Google Cloud Platform infrastructure, see theCloudera Enterprise Reference Architecture for Google Cloud Platform Deployments.

Microsoft Azure

For information on deploying Cloudera software on a Microsoft Azure cloud infrastructure, see theCloudera Enterprise Reference Architecture for Azure Deployments.

VMware

For information on deploying Cloudera software on a VMware-based infrastructure, see the Reference architecture for deploying on VMware.

Recommendation when deploying on VMware in the current release:

你可能感兴趣的:(Hadoop,Linux,hadoop,cloudera,安装)

  • android系统selinux中添加新属性property 辉色投像
    1.定位/android/system/sepolicy/private/property_contexts声明属性开头：persist.charge声明属性类型：u:object_r:system_prop:s0图12.定位到android/system/sepolicy/public/domain.te删除neverallow{domain-init}default_prop:property
  • element实现动态路由+面包屑 软件技术NINI vue案例vue.js前端
    el-breadcrumb是ElementUI组件库中的一个面包屑导航组件，它用于显示当前页面的路径，帮助用户快速理解和导航到应用的各个部分。在Vue.js项目中，如果你已经安装了ElementUI，就可以很方便地使用el-breadcrumb组件。以下是一个基本的使用示例：安装ElementUI（如果你还没有安装的话）:你可以通过npm或yarn来安装ElementUI。bash复制代码npmi
  • 理解Gunicorn：Python WSGI服务器的基石 范范0825 ipythonlinux运维
    理解Gunicorn：PythonWSGI服务器的基石介绍Gunicorn，全称GreenUnicorn，是一个为PythonWSGI（WebServerGatewayInterface）应用设计的高效、轻量级HTTP服务器。作为PythonWeb应用部署的常用工具，Gunicorn以其高性能和易用性著称。本文将介绍Gunicorn的基本概念、安装和配置，帮助初学者快速上手。1.什么是Gunico
  • Linux下QT开发的动态库界面弹出操作（SDL2） 13jjyao QT类qt开发语言sdl2linux
    需求：操作系统为linux，开发框架为qt，做成需带界面的qt动态库，调用方为java等非qt程序难点：调用方为java等非qt程序，也就是说调用方肯定不带QApplication::exec()，缺少了这个，QTimer等事件和QT创建的窗口将不能弹出(包括opencv也是不能弹出)；这与qt调用本身qt库是有本质的区别的思路：1.调用方缺QApplication::exec()，那么我们在接口
  • Python数据分析与可视化实战指南 William数据分析 pythonpython数据
    在数据驱动的时代，Python因其简洁的语法、强大的库生态系统以及活跃的社区，成为了数据分析与可视化的首选语言。本文将通过一个详细的案例，带领大家学习如何使用Python进行数据分析，并通过可视化来直观呈现分析结果。一、环境准备1.1安装必要库在开始数据分析和可视化之前，我们需要安装一些常用的库。主要包括pandas、numpy、matplotlib和seaborn等。这些库分别用于数据处理、数学
  • linux sdl windows.h,Windows下的SDL安装 奔跑吧linux内核 linuxsdlwindows.h
    首先你要下载并安装SDL开发包。如果装在C盘下，路径为C:\SDL1.2.5如果在WINDOWS下。你可以按以下步骤：1.打开VC++，点击"Tools",Options2,点击directories选项3.选择"Includefiles"增加一个新的路径。"C:\SDL1.2.5\include"4，现在选择"Libaryfiles“增加"C:\SDL1.2.5\lib"现在你可以开始编写你的第
  • Python教程：一文了解使用Python处理XPath 旦莫 Python进阶python开发语言
    目录1.环境准备1.1安装lxml1.2验证安装2.XPath基础2.1什么是XPath？2.2XPath语法2.3示例XML文档3.使用lxml解析XML3.1解析XML文档3.2查看解析结果4.XPath查询4.1基本路径查询4.2使用属性查询4.3查询多个节点5.XPath的高级用法5.1使用逻辑运算符5.2使用函数6.实战案例6.1从网页抓取数据6.1.1安装Requests库6.1.2代
  • linux中sdl的使用教程,sdl使用入门 Melissa Corvinus linux中sdl的使用教程
    本文通过一个简单示例讲解SDL的基本使用流程。示例中展示一个窗口，窗口里面有个随机颜色快随机移动。当我们鼠标点击关闭按钮时间窗口关闭。基本步骤如下：1.初始化SDL并创建一个窗口。SDL_Init()初始化SDL_CreateWindow()创建窗口2.纹理渲染存储RGB和存储纹理的区别：比如一个从左到右由红色渐变到蓝色的矩形，用存储RGB的话就需要把矩形中每个点的具体颜色值存储下来；而纹理只是一
  • PHP环境搭建详细教程 好看资源平台 前端php
    PHP是一个流行的服务器端脚本语言，广泛用于Web开发。为了使PHP能够在本地或服务器上运行，我们需要搭建一个合适的PHP环境。本教程将结合最新资料，介绍在不同操作系统上搭建PHP开发环境的多种方法，包括Windows、macOS和Linux系统的安装步骤，以及本地和Docker环境的配置。1.PHP环境搭建概述PHP环境的搭建主要分为以下几类：集成开发环境：例如XAMPP、WAMP、MAMP，这
  • 使用 FinalShell 进行远程连接（ssh 远程连接 Linux 服务器） 编程经验分享 开发工具服务器sshlinux
    目录前言基本使用教程新建远程连接连接主机自定义命令路由追踪前言后端开发，必然需要和服务器打交道，部署应用，排查问题，查看运行日志等等。一般服务器都是集中部署在机房中，也有一些直接是云服务器，总而言之，程序员不可能直接和服务器直接操作，一般都是通过ssh连接来登录服务器。刚接触远程连接时，使用的是XSHELL来远程连接服务器，连接上就能够操作远程服务器了，但是仅用XSHELL并没有上传下载文件的功能
  • 使用LLaVa和Ollama实现多模态RAG示例 llzwxh888 python人工智能开发语言
    本文将详细介绍如何使用LLaVa和Ollama实现多模态RAG（检索增强生成），通过提取图像中的结构化数据、生成图像字幕等功能来展示这一技术的强大之处。安装环境首先，您需要安装以下依赖包：!pipinstallllama-index-multi-modal-llms-ollama!pipinstallllama-index-readers-file!pipinstallunstructured!p
  • GitHub上克隆项目 bigbig猩猩 github
    从GitHub上克隆项目是一个简单且直接的过程，它允许你将远程仓库中的项目复制到你的本地计算机上，以便进行进一步的开发、测试或学习。以下是一个详细的步骤指南，帮助你从GitHub上克隆项目。一、准备工作1.安装Git在克隆GitHub项目之前，你需要在你的计算机上安装Git工具。Git是一个开源的分布式版本控制系统，用于跟踪和管理代码变更。你可以从Git的官方网站（https://git-scm.
  • libyuv之linux编译 jaronho Linuxlinux运维服务器
    文章目录一、下载源码二、编译源码三、注意事项1、银河麒麟系统（aarch64）（1）解决armv8-a+dotprod+i8mm指令集支持问题（2）解决armv9-a+sve2指令集支持问题一、下载源码到GitHub网站下载https://github.com/lemenkov/libyuv源码，或者用直接用git克隆到本地，如：gitclonehttps://github.com/lemenko
  • Python 实现图片裁剪（附代码） | Python工具 剑客阿良_ALiang
    前言本文提供将图片按照自定义尺寸进行裁剪的工具方法，一如既往的实用主义。环境依赖ffmpeg环境安装，可以参考我的另一篇文章：windowsffmpeg安装部署_阿良的博客-CSDN博客本文主要使用到的不是ffmpeg，而是ffprobe也在上面这篇文章中的zip包中。ffmpy安装：pipinstallffmpy-ihttps://pypi.douban.com/simple代码不废话了，上代码
  • 第六集如何安装CentOS7.0，3分钟学会centos7安装教程 date分享
    从光盘引导系统按回车键继续进入引导程序安装界面，选择语言这里选择简体中文版点击继续选择桌面安装下面给系统分区选择磁盘，点击完成选择基本分区，点击加号swap分区,大小填内存的两倍在选择根分区，使用所有可用的磁盘空间选择文件系统ext4点击完成，点击开始安装设置root密码，点击完成设置普通用户和密码，点击完成整个过程持续八分钟左右根据个人配置不同，时间长短不同好，现在点击重启系统进入重启状态点击本
  • Python爬虫解析工具之xpath使用详解 eqa11 python爬虫开发语言
    文章目录Python爬虫解析工具之xpath使用详解一、引言二、环境准备1、插件安装2、依赖库安装三、xpath语法详解1、路径表达式2、通配符3、谓语4、常用函数四、xpath在Python代码中的使用1、文档树的创建2、使用xpath表达式3、获取元素内容和属性五、总结Python爬虫解析工具之xpath使用详解一、引言在Python爬虫开发中，数据提取是一个至关重要的环节。xpath作为一门
  • ARM驱动学习之5 LEDS驱动 JT灬新一 嵌入式C底层arm开发学习单片机
    ARM驱动学习之5LEDS驱动知识点：•linuxGPIO申请函数和赋值函数–gpio_request–gpio_set_value•三星平台配置GPIO函数–s3c_gpio_cfgpin•GPIO配置输出模式的宏变量–S3C_GPIO_OUTPUT注意点：DRIVER_NAME和DEVICE_NAME匹配。实现步骤：1.加入需要的头文件：//Linux平台的gpio头文件#include//三
  • 【华为OD技术面试真题精选 - 非技术题】 -HR面，综合面_华为od hr面 一个射手座的程序媛 程序员华为od面试职场和发展
    最后的话最近很多小伙伴找我要Linux学习资料，于是我翻箱倒柜，整理了一些优质资源，涵盖视频、电子书、PPT等共享给大家！资料预览给大家整理的视频资料：给大家整理的电子书资料：如果本文对你有帮助，欢迎点赞、收藏、转发给朋友，让我有持续创作的动力！网上学习资料一大堆，但如果学到的知识不成体系，遇到问题时只是浅尝辄止，不再深入研究，那么很难做到真正的技术提升。需要这份系统化的资料的朋友，可以点击这里获
  • 简介Shell、zsh、bash zhaosuningsn Shellzshbashshelllinuxbash
    Shell是Linux和Unix的外壳，类似衣服，负责外界与Linux和Unix内核的交互联系。例如接收终端用户及各种应用程序的命令，把接收的命令翻译成内核能理解的语言，传递给内核，并把内核处理接收的命令的结果返回给外界，即Shell是外界和内核沟通的桥梁或大门。Linux和Unix提供了多种Shell，其中有种bash，当然还有其他好多种。Mac电脑中不但有bash，还有一个zsh，预装的，据说
  • Linux MariaDB使用OpenSSL安装SSL证书 Meta39 MySQLOracleMariaDBLinuxWindowsssllinuxmariadb
    进入到证书存放目录，批量删除.pem证书警告：确保已经进入到证书存放目录find.-typef-iname\*.pem-delete查看是否安装OpenSSLopensslversion没有则安装yuminstallopensslopenssl-devel开启SSL编辑/etc/my.cnf文件（没有的话就创建，但是要注意，在/etc/my.cnf.d/server.cnf配置了datadir的，
  • 【六】阿伟开始搭建Kafka学习环境 能源恒观 中间件学习kafkaspring
    阿伟开始搭建Kafka学习环境概述上一篇文章阿伟学习了Kafka的核心概念，并且把市面上流行的消息中间件特性进行了梳理和对比，方便大家在学习过程中进行对比学习，最后梳理了一些Kafka使用中经常遇到的Kafka难题以及解决思路，经过上一篇的学习我相信大家对Kafka有了初步的认识，本篇将继续学习Kafka。一、安装和配置学习一项技术首先要搭建一套服务，而Kafka的运行主要需要部署jdk、zook
  • openssl+keepalived安装部署 _小亦_ 项目部署keepalivedopenssl
    文章目录OpenSSL安装下载地址编译安装修改系统配置版本Keepalived安装下载地址安装遇到问题安装完成配置文件keepalived运行检查运行状态查看系统日志修改服务service重新加载systemd检查配置文件语法错误OpenSSL安装下载地址考虑到后面设备可能没法连接到外网，所以采用安装包的方式进行部署，下载地址：https://www.openssl.org/source/old/
  • 1分钟解决 -bash: mvn: command not found，在Centos 7中安装Maven Energet!c 开发语言
    1分钟解决-bash:mvn:commandnotfound，在Centos7中安装Maven检查Java环境1下载Maven2解压Maven3配置环境变量4验证安装5常见问题与注意事项6总结检查Java环境Maven依赖Java环境，请确保系统已经安装了Java并配置了环境变量。可以通过以下命令检查：java-version如果未安装，请先安装Java。1下载Maven从官网下载：前往Apach
  • Python实现简单的机器学习算法 master_chenchengg pythonpython办公效率python开发IT
    Python实现简单的机器学习算法开篇：初探机器学习的奇妙之旅搭建环境：一切从安装开始必备工具箱第一步：安装Anaconda和JupyterNotebook小贴士：如何配置Python环境变量算法初体验：从零开始的Python机器学习线性回归：让数据说话数据准备：从哪里找数据编码实战：Python实现线性回归模型评估：如何判断模型好坏逻辑回归：从分类开始理论入门：什么是逻辑回归代码实现：使用skl
  • 【从浅识到熟知Linux】Linux发展史 Jammingpro 从浅学到熟知Linuxlinux运维服务器
    归属专栏：从浅学到熟知Linux个人主页：Jammingpro每日努力一点点，技术变化看得见文章前言：本篇文章记录Linux发展的历史，因在介绍Linux过程中涉及的其他操作系统及人物，本文对相关内容也有所介绍。文章目录Unix发展史Linux发展史开源Linux官网企业应用情况发行版本在学习Linux前，我们可能都会问Linux从哪里来？它是如何发展的。但在介绍Linux之前，需要先介绍一下Un
  • linux 发展史 种树的猴子 内核java操作系统linux大数据
    linux发展史说明此前对linux认识模糊一知半解，近期通过学习将自己对于linux的发展总结一下方便大家日后的学习。那Linux是目前一款非常火热的开源操作系统，可是linux是什么时候出现的，又是因为什么样的原因被开发出来的呢。以下将对linux的发展历程进行详细的讲解。目录一、Linux发展背景二、UINIX的诞生三、UNIX的重要分支-BSD的诞生四、Minix的诞生五、GNU与Free
  • Linux sh命令 fengyehongWorld Linuxlinux
    目录一.基本语法二.选项2.1-c字符串中读取内容，并执行2.1.1基本用法2.1.2获取当前目录下失效的超链接2.2-x每个命令执行之前，将其打印出来2.3结合Here文档使用一.基本语法⏹Linux和Unix系统中用于执行shell脚本或运行命令的命令。sh[选项][脚本文件][参数...]⏹选项-c：从字符串中读取内容，并执行。-x：在每个命令执行之前，将其打印出来。-s：从标准流中读取内容
  • Linux vi常用命令 fengyehongWorld Linuxlinux
    参考资料viコマンド（vimコマンド）リファレンス目录一.保存系命令二.删除系命令三.移动系命令四.复制粘贴系命令一.保存系命令⏹保存并退出:wq⏹强制保存并退出:wq!⏹退出(文件未编辑):q⏹强制退出(忽略已编辑内容):q!⏹另存为:w新文件名二.删除系命令⏹删除当前行dd⏹清空整个文档gg：移动到文档顶部dG：删除到最后一行ggdG三.移动系命令⏹移动到文档顶部gg⏹移动到文档底部#方式1G
  • CentOS 7官方源停服，配置本机光盘yum源 码哝小鱼 linux运维centoslinux运维
    1、挂载系统光盘mkdir/mnt/isomount-oloop/tools/CentOS-7-x86_64-DVD-1810.iso/mnt/isocd/mnt/iso/Packages/rpm-ivh/mnt/iso/Packages/yum-utils-1.1.31-50.el7.noarch.rpm(图形界面安装，默契已安装）如安装yum-utils依赖错误，按提示安装依赖包rpm-ivh
  • Linux查看服务器日志 TPBoreas 运维linux运维
    一、tail这个是我最常用的一种查看方式用法如下：tail-n10test.log查询日志尾部最后10行的日志;tail-n+10test.log查询10行之后的所有日志;tail-fn10test.log循环实时查看最后1000行记录(最常用的)一般还会配合着grep用，(实时抓包)例如:tail-fn1000test.log|grep'关键字'（动态抓包）tail-fn1000test.log
  • 异常的核心类Throwable 无量 java源码异常处理exception
    java异常的核心是Throwable，其他的如Error和Exception都是继承的这个类 里面有个核心参数是detailMessage，记录异常信息，getMessage核心方法，获取这个参数的值，我们可以自己定义自己的异常类，去继承这个Exception就可以了，方法基本上，用父类的构造方法就OK，所以这么看异常是不是很easy package com.natsu;
  • mongoDB 游标（cursor） 实现分页 迭代 开窍的石头 mongodb
    上篇中我们讲了mongoDB 中的查询函数，现在我们讲mongo中如何做分页查询      如何声明一个游标        var mycursor = db.user.find({_id:{$lte:5}});       迭代显示游标数
  • MySQL数据库INNODB 表损坏修复处理过程 0624chenhong tomcatmysql
    最近mysql数据库经常死掉，用命令net stop mysql命令也无法停掉，关闭Tomcat的时候，出现Waiting for N instance(s) to be deallocated 信息。查了下，大概就是程序没有对数据库连接释放，导致Connection泄露了。因为用的是开元集成的平台，内部程序也不可能一下子给改掉的，就验证一下咯。启动Tomcat,用户登录系统，用netstat -
  • 剖析如何与设计人员沟通 不懂事的小屁孩 工作
    最近做图烦死了，不停的改图，改图……。烦，倒不是因为改，而是反反复复的改，人都会死。很多需求人员不知该如何与设计人员沟通，不明白如何使设计人员知道他所要的效果，结果只能是沟通变成了扯淡，改图变成了应付。 那应该如何与设计人员沟通呢？ 我认为设计人员与需求人员先天就存在语言障碍。对一个合格的设计人员来说，整天玩的都是点、线、面、配色，哪种构图看起来协调；哪种配色看起来合理心里跟明镜似的，
  • qq空间刷评论工具 换个号韩国红果果 JavaScript
    var a=document.getElementsByClassName('textinput'); var b=[]; for(var m=0;m<a.length;m++){ if(a[m].getAttribute('placeholder')!=null) b.push(a[m]) } var l
  • S2SH整合之session 灵静志远 springAOPstrutssession
    错误信息： Caused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'cartService': Scope 'session' is not active for the current thread; consider defining a scoped
  • xmp标签 a-john 标签
    今天在处理数据的显示上遇到一个问题： var html = '<li><div class="pl-nr"><span class="user-name">' + user + '</span>' + text + '</div></li>'; ulComme
  • Ajax的常用技巧（2）---实现Web页面中的级联菜单 aijuans Ajax
    在网络上显示数据，往往只显示数据中的一部分信息，如文章标题，产品名称等。如果浏览器要查看所有信息，只需点击相关链接即可。在web技术中，可以采用级联菜单完成上述操作。根据用户的选择，动态展开，并显示出对应选项子菜单的内容。 在传统的web实现方式中，一般是在页面初始化时动态获取到服务端数据库中对应的所有子菜单中的信息，放置到页面中对应的位置，然后再结合CSS层叠样式表动态控制对应子菜单的显示或者隐
  • 天-安-门，好高 atongyeye 情感
        我是85后，北漂一族，之前房租1100，因为租房合同到期，再续，房租就要涨150。最近网上新闻，地铁也要涨价。算了一下，涨价之后，每次坐地铁由原来2块变成6块。仅坐地铁费用，一个月就要涨200。内心苦痛。     晚上躺在床上一个人想了很久，很久。        我生在农
  • android 动画 百合不是茶 android透明度平移缩放旋转
    android的动画有两种  tween动画和Frame动画   tween动画;,透明度,缩放,旋转,平移效果   Animation   动画 AlphaAnimation 渐变透明度 RotateAnimation 画面旋转 ScaleAnimation 渐变尺寸缩放 TranslateAnimation 位置移动 Animation
  • 查看本机网络信息的cmd脚本 bijian1013 cmd
    @echo 您的用户名是：%USERDOMAIN%\%username%>"%userprofile%\网络参数.txt" @echo 您的机器名是：%COMPUTERNAME%>>"%userprofile%\网络参数.txt" @echo ___________________>>"%userprofile%\
  • plsql 清除登录过的用户 征客丶 plsql
    tools---preferences----logon history---history  把你想要删除的删除 -------------------------------------------------------------------- 若有其他凝问或文中有错误，请及时向我指出， 我好及时改正，同时也让我们一起进步。 email ： binary_spac
  • 【Pig一】Pig入门 bit1129 pig
    Pig安装 1.下载pig   wget http://mirror.bit.edu.cn/apache/pig/pig-0.14.0/pig-0.14.0.tar.gz   2. 解压配置环境变量      如果Pig使用Map/Reduce模式，那么需要在环境变量中，配置HADOOP_HOME环境变量   expor
  • Java 线程同步几种方式 BlueSkator volatilesynchronizedThredLocalReenTranLockConcurrent
    为何要使用同步？      java允许多线程并发控制，当多个线程同时操作一个可共享的资源变量时（如数据的增删改查），      将会导致数据不准确，相互之间产生冲突，因此加入同步锁以避免在该线程没有完成操作之前，被其他线程的调用，      从而保证了该变量的唯一性和准确性。 1.同步方法&
  • StringUtils判断字符串是否为空的方法（转帖） BreakingBad nullStringUtils“”
    转帖地址：http://www.cnblogs.com/shangxiaofei/p/4313111.html   public static boolean isEmpty(String str)   　　判断某字符串是否为空，为空的标准是 str== null  或 str.length()== 0  
  • 编程之美-分层遍历二叉树 bylijinnan java数据结构算法编程之美
    import java.util.ArrayList; import java.util.LinkedList; import java.util.List; public class LevelTraverseBinaryTree { /** * 编程之美 分层遍历二叉树 * 之前已经用队列实现过二叉树的层次遍历，但这次要求输出换行，因此要
  • jquery取值和ajax提交复习记录 chengxuyuancsdn jquery取值ajax提交
    // 取值 // alert($("input[name='username']").val()); // alert($("input[name='password']").val()); // alert($("input[name='sex']:checked").val()); // alert($("
  • 推荐国产工作流引擎嵌入式公式语法解析器-IK Expression comsci java应用服务器工作Excel嵌入式
    这个开源软件包是国内的一位高手自行研制开发的，正如他所说的一样，我觉得它可以使一个工作流引擎上一个台阶。。。。。。欢迎大家使用，并提出意见和建议。。。 ----------转帖--------------------------------------------------- IK Expression是一个开源的（OpenSource），可扩展的（Extensible），基于java语言
  • 关于系统中使用多个PropertyPlaceholderConfigurer的配置及PropertyOverrideConfigurer daizj spring
    1、PropertyPlaceholderConfigurer Spring中PropertyPlaceholderConfigurer这个类，它是用来解析Java Properties属性文件值，并提供在spring配置期间替换使用属性值。接下来让我们逐渐的深入其配置。 基本的使用方法是：(1) <bean id="propertyConfigurerForWZ&q
  • 二叉树:二叉搜索树 dieslrae 二叉树
        所谓二叉树,就是一个节点最多只能有两个子节点,而二叉搜索树就是一个经典并简单的二叉树.规则是一个节点的左子节点一定比自己小,右子节点一定大于等于自己(当然也可以反过来).在树基本平衡的时候插入,搜索和删除速度都很快,时间复杂度为O(logN).但是,如果插入的是有序的数据,那效率就会变成O(N),在这个时候,树其实变成了一个链表. tree代码:
  • C语言字符串函数大全 dcj3sjt126com cfunction
    C语言字符串函数大全     函数名: stpcpy 功 能: 拷贝一个字符串到另一个 用 法: char *stpcpy(char *destin, char *source); 程序例:   #include <stdio.h> #include <string.h>   int main
  • 友盟统计页面技巧 dcj3sjt126com 技巧
    在基类调用就可以了, 基类ViewController示例代码 -(void)viewWillAppear:(BOOL)animated { [super viewWillAppear:animated]; [MobClick beginLogPageView:[NSString stringWithFormat:@"%@",self.class]];
  • window下在同一台机器上安装多个版本jdk，修改环境变量不生效问题处理办法 flyvszhb javajdk
    window下在同一台机器上安装多个版本jdk，修改环境变量不生效问题处理办法 本机已经安装了jdk1.7，而比较早期的项目需要依赖jdk1.6，于是同时在本机安装了jdk1.6和jdk1.7. 安装jdk1.6前，执行java -version得到 C:\Users\liuxiang2>java -version java version "1.7.0_21&quo
  • Java在创建子类对象的同时会不会创建父类对象 happyqing java创建子类对象父类对象
      1.在thingking in java 的第四版第六章中明确的说了，子类对象中封装了父类对象，   2."When you create an object of the derived class, it contains within it a subobject of the base class. This subobject is the sam
  • 跟我学spring3 目录贴及电子书下载 jinnianshilongnian spring
        一、《跟我学spring3》电子书下载地址： 《跟我学spring3》  （1-7 和 8-13） http://jinnianshilongnian.iteye.com/blog/pdf     跟我学spring3系列 word原版 下载     二、 源代码下载 最新依
  • 第12章 Ajax（上） onestopweb Ajax
    index.html <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/
  • BI and EIM 4.0 at a glance blueoxygen BO
    http://www.sap.com/corporate-en/press.epx?PressID=14787   有机会研究下EIM家族的两个新产品~~~~   New features of the 4.0 releases of BI and EIM solutions include: Real-time in-memory computing –
  • Java线程中yield与join方法的区别 tomcat_oracle java
    长期以来，多线程问题颇为受到面试官的青睐。虽然我个人认为我们当中很少有人能真正获得机会开发复杂的多线程应用(在过去的七年中，我得到了一个机会)，但是理解多线程对增加你的信心很有用。之前，我讨论了一个wait()和sleep()方法区别的问题，这一次，我将会讨论join()和yield()方法的区别。坦白的说，实际上我并没有用过其中任何一个方法，所以，如果你感觉有不恰当的地方，请提出讨论。 &nb
  • android Manifest.xml选项 阿尔萨斯 Manifest
    结构 继承关系 public final class Manifest extends Objectjava.lang.Objectandroid.Manifest 内部类 class Manifest.permission权限 class Manifest.permission_group权限组 构造函数 public Manifest () 详细 androi
  • Oracle实现类split函数的方 zhaoshijie oracle
    关键字：Oracle实现类split函数的方 项目里需要保存结构数据，批量传到后他进行保存，为了减小数据量，子集拼装的格式，使用存储过程进行保存。保存的过程中需要对数据解析。但是oracle没有Java中split类似的函数。从网上找了一个，也补全了一下。 CREATE OR REPLACE TYPE t_split_100 IS TABLE OF VARCHAR2(100); cr
按字母分类： ABCDEFGHIJKLMNOPQRSTUVWXYZ其他