WPF调用海康工业相机SDK采集图像并在halcon控件中成像
原参考文章
本篇大部分代码都是原参考文章中的，详情可以看原参考文章。
所需引用的名控件如图所示，前两个原文章有写，后两个需要在右击引用的程序集中自己找，如下2图。
项目目标平台要改成*64（右击你当前的项目，最后有个属性）
完成前期名空间引用后，写一个专门类放海康工业相机需要调用的方法，降低前端代码的代码量，代码复制粘贴了原大佬文章中的内容，这里整合了一下。
using System;
using System.Collections.Generic;
using System.Linq;
using System.Runtime.InteropServices;
using System.Text;
using System.Threading.Tasks;
using System.Windows;
using System.Windows.Controls;
using HalconDotNet;
using MvCamCtrl.NET;
namespace UnionHalcon
{
public class Hikvision
{
private MyCamera m_pMyCamera;
MyCamera.MV_CC_DEVICE_INFO_LIST m_pDeviceList;//设备列表
private MyCamera.MVCC_INTVALUE stParam;//用于接收特定的参数
//为读取、保存图像创建的数组
UInt32 m_nBufSizeForDriver = 3072 * 2048 * 3;
byte[] m_pBufForDriver = new byte[3072 * 2048 * 3];
UInt32 m_nBufSizeForSaveImage = 3072 * 2048 * 3 * 3 + 2048;
byte[] m_pBufForSaveImage = new byte[3072 * 2048 * 3 * 3 + 2048];
//要转成的Halcon图像
HImage image = new HImage();
//查找设备
public void DeviceListAcq(ref ComboBox cbDeviceList)
{
int nRet;
// ch:创建设备列表 en:Create Device List
System.GC.Collect();
cbDeviceList.Items.Clear();
nRet = MyCamera.MV_CC_EnumDevices_NET(MyCamera.MV_GIGE_DEVICE | MyCamera.MV_USB_DEVICE, ref m_pDeviceList);
if (0 != nRet)
{
MessageBox.Show("查找设备失败！");
return;
}
// ch:在窗体列表中显示设备名 | en:Display device name in the form list
for (int i = 0; i < m_pDeviceList.nDeviceNum; i++)
{
MyCamera.MV_CC_DEVICE_INFO device = (MyCamera.MV_CC_DEVICE_INFO)Marshal.PtrToStructure(m_pDeviceList.pDeviceInfo[i], typeof(MyCamera.MV_CC_DEVICE_INFO));
if (device.nTLayerType == MyCamera.MV_GIGE_DEVICE)
{
IntPtr buffer = Marshal.UnsafeAddrOfPinnedArrayElement(device.SpecialInfo.stGigEInfo, 0);
MyCamera.MV_GIGE_DEVICE_INFO gigeInfo = (MyCamera.MV_GIGE_DEVICE_INFO)Marshal.PtrToStructure(buffer, typeof(MyCamera.MV_GIGE_DEVICE_INFO));
if (gigeInfo.chUserDefinedName != "")
{
cbDeviceList.Items.Add("GigE: " + gigeInfo.chUserDefinedName + " (" + gigeInfo.chSerialNumber + ")");
}
else
{
cbDeviceList.Items.Add("GigE: " + gigeInfo.chManufacturerName + " " + gigeInfo.chModelName + " (" + gigeInfo.chSerialNumber + ")");
}
}
else if (device.nTLayerType == MyCamera.MV_USB_DEVICE)
{
IntPtr buffer = Marshal.UnsafeAddrOfPinnedArrayElement(device.SpecialInfo.stUsb3VInfo, 0);
MyCamera.MV_USB3_DEVICE_INFO usbInfo = (MyCamera.MV_USB3_DEVICE_INFO)Marshal.PtrToStructure(buffer, typeof(MyCamera.MV_USB3_DEVICE_INFO));
if (usbInfo.chUserDefinedName != "")
{
cbDeviceList.Items.Add("USB: " + usbInfo.chUserDefinedName + " (" + usbInfo.chSerialNumber + ")");
}
else
{
cbDeviceList.Items.Add("USB: " + usbInfo.chManufacturerName + " " + usbInfo.chModelName + " (" + usbInfo.chSerialNumber + ")");
}
}
}
// ch:选择第一项 | en:Select the first item
if (m_pDeviceList.nDeviceNum != 0)
{
cbDeviceList.SelectedIndex = 0;
}
}
//打开设备
public void OpenDevice(ComboBox cbDeviceList)
{
if (m_pDeviceList.nDeviceNum == 0 || cbDeviceList.SelectedIndex == -1)
{
MessageBox.Show("未发现设备，请选择");
return;
}
int nRet = -1;
// ch:获取选择的设备信息 | en:Get selected device information
MyCamera.MV_CC_DEVICE_INFO device =
(MyCamera.MV_CC_DEVICE_INFO)Marshal.PtrToStructure(m_pDeviceList.pDeviceInfo[cbDeviceList.SelectedIndex],
typeof(MyCamera.MV_CC_DEVICE_INFO));
// ch:打开设备 | en:Open device
if (null == m_pMyCamera)
{
m_pMyCamera = new MyCamera();
if (null == m_pMyCamera)
{
return;
}
}
nRet = m_pMyCamera.MV_CC_CreateDevice_NET(ref device);
if (MyCamera.MV_OK != nRet)
{
return;
}
nRet = m_pMyCamera.MV_CC_OpenDevice_NET();
if (MyCamera.MV_OK != nRet)
{
m_pMyCamera.MV_CC_DestroyDevice_NET();
MessageBox.Show("设备打开失败");
//ShowErrorMsg("Device open fail!", nRet);
return;
}
// ch:探测网络最佳包大小(只对GigE相机有效) | en:Detection network optimal package size(It only works for the GigE camera)
if (device.nTLayerType == MyCamera.MV_GIGE_DEVICE)
{
int nPacketSize = m_pMyCamera.MV_CC_GetOptimalPacketSize_NET();
if (nPacketSize > 0)
{
nRet = m_pMyCamera.MV_CC_SetIntValue_NET("GevSCPSPacketSize", (uint)nPacketSize);
if (nRet != MyCamera.MV_OK)
{
Console.WriteLine("Warning: Set Packet Size failed {0:x8}", nRet);
}
}
else
{
Console.WriteLine("Warning: Get Packet Size failed {0:x8}", nPacketSize);
}
}
MessageBox.Show("相机打开成功");
// ch:设置采集连续模式 | en:Set Continues Aquisition Mode
m_pMyCamera.MV_CC_SetEnumValue_NET("AcquisitionMode", 2);// ch:工作在连续模式 | en:Acquisition On Continuous Mode
m_pMyCamera.MV_CC_SetEnumValue_NET("TriggerMode", 0); // ch:连续模式 | en:Continuous
}
//连续采集（也就是实时显示）
public void ContinuesGrab(System.Windows.Forms.PictureBox picBox)
{
int nRet;
// ch:开始采集 | en:Start Grabbing
nRet = m_pMyCamera.MV_CC_StartGrabbing_NET();
if (MyCamera.MV_OK != nRet)
{
MessageBox.Show("采集失败！");
//ShowErrorMsg("Trigger Fail!", nRet);
return;
}
else
{
MessageBox.Show("开始连续采集");
}
//实时采集
m_pMyCamera.MV_CC_SetEnumValue_NET("TriggerMode", 0);
// ch:显示 | en:Display 在PictureBox控件中显示
nRet = m_pMyCamera.MV_CC_Display_NET(picBox.Handle);
if (MyCamera.MV_OK != nRet)
{
MessageBox.Show("显示失败！");
}
}
//读取图片转换成Halcon图像
public HImage ReadImage()
{
int nRet;
//MyCamera.MVCC_INTVALUE stParam = new MyCamera.MVCC_INTVALUE();
UInt32 nPayloadSize = 0;
nRet = m_pMyCamera.MV_CC_GetIntValue_NET("PayloadSize", ref stParam);
if (MyCamera.MV_OK != nRet)
{
return null;
}
nPayloadSize = stParam.nCurValue;
if (nPayloadSize > m_nBufSizeForDriver)
{
m_nBufSizeForDriver = nPayloadSize;
m_pBufForDriver = new byte[m_nBufSizeForDriver];
m_nBufSizeForSaveImage = m_nBufSizeForDriver * 3 + 2048;
m_pBufForSaveImage = new byte[m_nBufSizeForSaveImage];
}
IntPtr pData = Marshal.UnsafeAddrOfPinnedArrayElement(m_pBufForDriver, 0);
MyCamera.MV_FRAME_OUT_INFO_EX stFrameInfo = new MyCamera.MV_FRAME_OUT_INFO_EX();
nRet = m_pMyCamera.MV_CC_GetOneFrameTimeout_NET(pData, m_nBufSizeForDriver, ref stFrameInfo, 1000);//获取一帧图像，超时时间设置为1000
if (MyCamera.MV_OK != nRet)
{
return null;
}
HImage image = new HImage();
//采集的是黑白图像，利用Halcon图像库中的GenImage1算子来构建图像
image.GenImage1("byte", (int)stFrameInfo.nWidth, (int)stFrameInfo.nHeight, pData);
return image;
}
//停止采集
public void StopGrab()
{
int nRet = -1;
// ch:停止采集 | en:Stop Grabbing
nRet = m_pMyCamera.MV_CC_StopGrabbing_NET();
if (nRet != MyCamera.MV_OK)
{
MessageBox.Show("停止采集失败！");
}
}
}
}
界面用wpf简单写了一个，如下图
前端代码如下所示
后台事件单机代码如图所示。
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows;
using System.Windows.Controls;
using System.Windows.Data;
using System.Windows.Documents;
using System.Windows.Input;
using System.Windows.Media;
using System.Windows.Media.Imaging;
using System.Windows.Navigation;
using System.Windows.Shapes;
using HalconDotNet;
namespace UnionHalClassOut
{
///
/// MainWindow.xaml 的交互逻辑
///
public partial class MainWindow : Window
{
public MainWindow()
{
InitializeComponent();
}
Hikvision ucDeviceList1 = new Hikvision();
private void FindDevice_Click(object sender, RoutedEventArgs e)
{
ucDeviceList1.DeviceListAcq(ref cbDeviceList);
}
private void Opendevice_Click(object sender, RoutedEventArgs e)
{
ucDeviceList1.OpenDevice(cbDeviceList);
}
private void Continue_Click(object sender, RoutedEventArgs e)
{
ucDeviceList1.ContinuesGrab(pictureBox1);
}
private void StopDevice_Click(object sender, RoutedEventArgs e)
{
ucDeviceList1.StopGrab();
}
private void SingalGet_Click(object sender, RoutedEventArgs e)
{
HTuple hWind = hwindowWPF.HalconWindow;
HTuple width, height;
HObject hv_image;
HOperatorSet.GenEmptyObj(out hv_image);
hv_image.Dispose();
hv_image = ucDeviceList1.ReadImage();
HOperatorSet.GetImageSize(hv_image, out width, out height);
HOperatorSet.SetPart(hWind, 0, 0, height - 1, width - 1);
HOperatorSet.DispObj(hv_image, hWind);
}
}
}
最后一个简易版工业相机监控拍照就可以了。