华为模拟器ensp-vlan-lacp笔记

vlan端口类型(思维导图)

华为ensp-lacp-vlan试验

*试验目的:
目的:实现pc1经sw1通过lacp链路聚合连接sw2跨vlan访问pc3
pc1:10.42.10.1 网关10.42.10.254/24
sw1:vlan10:g0/0/3接通pc1
sw1:开通vlan10 20 30并设置0/0/23,0/0/24为lacp trunk
sw2:开通vlan10 20 30并设置0/0/23,0/0/24为lacp trunk
sw2：设置vlanif 10接口ip 10.42.10.254/24
vlanif 30接口ip 10.42.30.254/24
sw2：vlan30:g0/0/3接通pc3
pc3:10.42.30.1/24 网关10.42.30.254/24

pc1:10.42.10.1/24 网关10.42.10.254
pc3:10.42.30.1/24 网关10.42.30.254
sw1配置:

sytem-view  （或快捷键 sy）
[Huawei]sysname sw1
[sw1]int Eth-Trunk 1
[sw1-Eth-Trunk1]mode lacp-static 
[sw1-Eth-Trunk1]trunkport g 0/0/23  0/0/24
[sw1-Eth-Trunk1]port link-type trunk 
[sw1-Eth-Trunk1]port trunk allow-pass vlan all （此处的all默认为2-4094）
[sw1-Eth-Trunk1]q
[sw1]vlan batch 10 20 30
[sw1]int g 0/0/3
[sw1-GigabitEthernet0/0/3]port link-type access 
[sw1-GigabitEthernet0/0/3]port default vlan 10
[sw1-GigabitEthernet0/0/3]q
[sw1]q
[sw1]save

sw2交换机配置:

sy  
[Huawei]sysname sw2
[sw2]int Eth-Trunk 1
[sw2-Eth-Trunk1]mode lacp-static 
[sw2-Eth-Trunk1]trunkport g 0/0/23  0/0/24
[sw2-Eth-Trunk1]port link-type trunk 
[sw2-Eth-Trunk1]port trunk allow-pass vlan  all （此处的all默认为2-4094）
[sw2-Eth-Trunk1]q
[sw2]vlan batch 10 20 30
[sw2]int g 0/0/3
[sw2-GigabitEthernet0/0/3]port link-type access 
[sw2-GigabitEthernet0/0/3]port default vlan 30
[sw2-GigabitEthernet0/0/3]q
[sw2]int vlanif 10
[sw2-Vlanif10]ip address 10.42.10.254 24 (此ip为vlanif10虚拟端口ip)
[sw2-Vlanif10]q
[sw2]int vlanif 30
[sw2-Vlanif30]ip address 10.42.30.254 24 (此ip为vlanif10虚拟端口ip)
[sw2-Vlanif30]q
[sw2]q
[sw2]save

补充:单独的vlan trunk配置

int g 0/0/10
port link-type trunk
port trunk allow-pass vlan all （2-4094）