zookeeper源码(05)数据存储

本文详细分析一下zookeeper的数据存储。

ZKDatabase

维护zookeeper服务器内存数据库,包括session、dataTree和committedlog数据,从磁盘读取日志和快照后启动。

关键字段

// 数据节点树
protected DataTree dataTree;
protected ConcurrentHashMap<Long, Integer> sessionsWithTimeouts;
protected FileTxnSnapLog snapLog; // 用于操作底层数据文件
// committedLog中第一条和最后一条数据的zxid
protected long minCommittedLog, maxCommittedLog;
// committedLog最大容量,默认500
public int commitLogCount;
// 维护最后提交的请求集,可用于快速follower同步
protected Queue<Proposal> committedLog = new ArrayDeque<>();

protected ReentrantReadWriteLock logLock = new ReentrantReadWriteLock();
private volatile boolean initialized = false;

// txnlog计数
private AtomicInteger txnCount = new AtomicInteger(0);

构造方法

public ZKDatabase(FileTxnSnapLog snapLog) {
    dataTree = createDataTree();
    sessionsWithTimeouts = new ConcurrentHashMap<>();
    this.snapLog = snapLog;

    // 初始化snapshotSizeFactor默认0.33
    // 初始化commitLogCount默认500
}

public DataTree createDataTree() {
    return new DataTree();
}

创建DataTree对象:创建/zookeeper/quota、/zookeeper/config节点,创建dataWatches和childWatches对象(使用WatchManager实现类)。

主要方法

// 返回committedLog集
public synchronized Collection<Proposal> getCommittedLog();
// 返回dataTree.lastProcessedZxid的值
public long getDataTreeLastProcessedZxid();
// 返回dataTree.getSessions()集
public Collection<Long> getSessions();
// 返回sessionsWithTimeouts的size
public long getSessionCount();
// 从磁盘加载dataTree并把txnLog加载到committedLog中
public long loadDataBase() throws IOException;
// 从磁盘加载txnLog到committedLog中
public long fastForwardDataBase() throws IOException;
// 使用addCommittedProposal方法添加committedLog
private void addCommittedProposal(TxnHeader hdr, Record txn, TxnDigest digest);
// 添加committedLog
public void addCommittedProposal(Request request);
// 从txnLog加载Proposal
public Iterator<Proposal> getProposalsFromTxnLog(long startZxid, long sizeLimit);
// 使用dataTree.removeCnxn(cnxn)
public void removeCnxn(ServerCnxn cnxn);
// 使用dataTree.killSession(sessionId, zxid)
public void killSession(long sessionId, long zxid);
// 使用dataTree.dumpEphemerals(pwriter)
public void dumpEphemerals(PrintWriter pwriter);
// 使用dataTree.getEphemerals()
public Map<Long, Set<String>> getEphemerals();
// 使用dataTree.getNodeCount()
public int getNodeCount();
// 使用dataTree.getEphemerals(sessionId)
public Set<String> getEphemerals(long sessionId);
// 给dataTree.lastProcessedZxid赋值
public void setlastProcessedZxid(long zxid);
// 使用dataTree.processTxn(hdr, txn, digest)
public ProcessTxnResult processTxn(TxnHeader hdr, Record txn, TxnDigest digest);
// 使用dataTree.statNode(path, serverCnxn)
public Stat statNode(String path, ServerCnxn serverCnxn) throws KeeperException.NoNodeException;
// 使用dataTree.getNode(path)
public DataNode getNode(String path);
// 使用dataTree.getData(path, stat, watcher)
public byte[] getData(String path, Stat stat, Watcher watcher) throws KeeperException.NoNodeException;
// 使用dataTree.setWatches方法实现
public void setWatches(long relativeZxid, List<String> dataWatches,
                       List<String> existWatches, List<String> childWatches,
                       List<String> persistentWatches, List<String> persistentRecursiveWatches,
                       Watcher watcher);
// 使用dataTree.addWatch(basePath, watcher, mode)
public void addWatch(String basePath, Watcher watcher, int mode);
// 使用dataTree.getChildren(path, stat, watcher)
public List<String> getChildren(
    String path, Stat stat, Watcher watcher) throws KeeperException.NoNodeException;
// 使用dataTree.getAllChildrenNumber(path)
public int getAllChildrenNumber(String path) throws KeeperException.NoNodeException;
// Truncate the ZKDatabase to the specified zxid
public boolean truncateLog(long zxid) throws IOException;
// Deserialize a snapshot from an input archive
public void deserializeSnapshot(InputArchive ia) throws IOException;
// Deserialize a snapshot that contains FileHeader from an input archive
// It is used by the admin restore command
public void deserializeSnapshot(final InputArchive ia, final CheckedInputStream is) throws IOException;
// Serialize the snapshot
public void serializeSnapshot(OutputArchive oa) throws IOException, InterruptedException;
// 使用snapLog.append(si)保存数据,txnCount++
public boolean append(Request si) throws IOException;
// 使用snapLog.rollLog()滚动底层txnLog
public void rollLog() throws IOException;
// 使用snapLog.commit()提交底层txnLog
public void commit() throws IOException;
// 初始化/zookeeper/config数据,集群启动时已介绍
public synchronized void initConfigInZKDatabase(QuorumVerifier qv);
// 使用dataTree.containsWatcher(path, type, watcher)
public boolean containsWatcher(String path, WatcherType type, Watcher watcher);
// 使用dataTree.removeWatch(path, type, watcher)
public boolean removeWatch(String path, WatcherType type, Watcher watcher);

loadDataBase方法

从磁盘加载dataTree并把txnLog加载到committedLog中:

public long loadDataBase() throws IOException {
    long startTime = Time.currentElapsedTime();
    // 1. 从snapshot加载dataTree
    // 2. 使用fastForwardFromEdits方法从txnLog加载dataTree和committedlog
    long zxid = snapLog.restore(dataTree, sessionsWithTimeouts, commitProposalPlaybackListener);
    initialized = true;
    // 略
    return zxid;
}

fastForwardDataBase方法

从txnLog加载dataTree和committedlog集:

public long fastForwardDataBase() throws IOException {
    // 会通过commitProposalPlaybackListener调用addCommittedProposal添加committedlog
    long zxid = snapLog.fastForwardFromEdits(
        dataTree, sessionsWithTimeouts, commitProposalPlaybackListener);
    initialized = true;
    return zxid;
}

addCommittedProposal方法

private void addCommittedProposal(TxnHeader hdr, Record txn, TxnDigest digest) {
    Request r = new Request(0, hdr.getCxid(), hdr.getType(), hdr, txn, hdr.getZxid());
    r.setTxnDigest(digest);
    addCommittedProposal(r);
}

public void addCommittedProposal(Request request) {
    WriteLock wl = logLock.writeLock();
    try {
        wl.lock();
        if (committedLog.size() > commitLogCount) {
            committedLog.remove();
            minCommittedLog = committedLog.peek().packet.getZxid();
        }
        if (committedLog.isEmpty()) {
            minCommittedLog = request.zxid;
            maxCommittedLog = request.zxid;
        }
        byte[] data = request.getSerializeData();
        QuorumPacket pp = new QuorumPacket(Leader.PROPOSAL, request.zxid, data, null);
        Proposal p = new Proposal();
        p.packet = pp;
        p.request = request;
        committedLog.add(p);
        maxCommittedLog = p.packet.getZxid();
    } finally {
        wl.unlock();
    }
}

getProposalsFromTxnLog方法

从txnlog获取Proposal,只填充packet字段:

public Iterator<Proposal> getProposalsFromTxnLog(long startZxid, long sizeLimit) {
    if (sizeLimit < 0) {
        return TxnLogProposalIterator.EMPTY_ITERATOR;
    }

    TxnIterator itr = null;
    try {
        // 从txnLog文件读取数据
        // 底层通过FileTxnIterator类读取文件流实现
        itr = snapLog.readTxnLog(startZxid, false);

        // If we cannot guarantee that this is strictly the starting txn
        // after a given zxid, we should fail.
        if ((itr.getHeader() != null) && (itr.getHeader().getZxid() > startZxid)) {
            itr.close();
            return TxnLogProposalIterator.EMPTY_ITERATOR;
        }

        if (sizeLimit > 0) {
            long txnSize = itr.getStorageSize();
            if (txnSize > sizeLimit) {
                itr.close();
                return TxnLogProposalIterator.EMPTY_ITERATOR;
            }
        }
    } catch (IOException e) {
        itr.close();
        return TxnLogProposalIterator.EMPTY_ITERATOR;
    }
    return new TxnLogProposalIterator(itr);
}

truncateLog方法

把txnlog数据truncate到指定的zxid位置,然后重新加载DataTree数据:

public boolean truncateLog(long zxid) throws IOException {
    clear();

    // truncate the log
    boolean truncated = snapLog.truncateLog(zxid);

    if (!truncated) {
        return false;
    }

    loadDataBase();
    return true;
}

deserializeSnapshot方法

public void deserializeSnapshot(InputArchive ia) throws IOException {
    clear();
    SerializeUtils.deserializeSnapshot(getDataTree(), ia, getSessionWithTimeOuts());
    initialized = true;
}

public void deserializeSnapshot(final InputArchive ia, final CheckedInputStream is) throws IOException {
    clear();

    // deserialize data tree
    final DataTree dataTree = getDataTree();
    FileSnap.deserialize(dataTree, getSessionWithTimeOuts(), ia);
    SnapStream.checkSealIntegrity(is, ia);

    // deserialize digest and check integrity
    if (dataTree.deserializeZxidDigest(ia, 0)) {
        SnapStream.checkSealIntegrity(is, ia);
    }

    // deserialize lastProcessedZxid and check integrity
    if (dataTree.deserializeLastProcessedZxid(ia)) {
        SnapStream.checkSealIntegrity(is, ia);
    }

    // compare the digest to find inconsistency
    if (dataTree.getDigestFromLoadedSnapshot() != null) {
        dataTree.compareSnapshotDigests(dataTree.lastProcessedZxid);
    }

    initialized = true;
}

serializeSnapshot方法

public void serializeSnapshot(OutputArchive oa) throws IOException, InterruptedException {
    SerializeUtils.serializeSnapshot(getDataTree(), oa, getSessionWithTimeOuts());
}

DataTree

维护树状结构,没有任何网络或客户端连接代码,因此可以以独立的方式进行测试。

维护两个并行的数据结构:一个从完整路径映射到DataNodes的哈希表和一个DataNodes树,对路径的所有访问都是通过哈希表进行的,只有在序列化到磁盘时才遍历DataNodes树。

关键字段

// This map provides a fast lookup to the data nodes
private final NodeHashMap nodes;
// Watcher
private IWatchManager dataWatches;
private IWatchManager childWatches;
// cached total size of paths and data for all DataNodes
private final AtomicLong nodeDataSize = new AtomicLong(0);
// This hashtable lists the paths of the ephemeral nodes of a session
private final Map<Long, HashSet<String>> ephemerals = new ConcurrentHashMap<>();
// This set contains the paths of all container nodes
private final Set<String> containers = Collections.newSetFromMap(new ConcurrentHashMap<>());
// This set contains the paths of all ttl nodes
private final Set<String> ttls = Collections.newSetFromMap(new ConcurrentHashMap<>());
// This is a pointer to the root of the DataTree
private DataNode root = new DataNode(new byte[0], -1L, new StatPersisted());
// create a /zookeeper filesystem that is the proc filesystem of zookeeper
private final DataNode procDataNode = new DataNode(new byte[0], -1L, new StatPersisted());
// create a /zookeeper/quota node for maintaining quota properties for zookeeper
private final DataNode quotaDataNode = new DataNode(new byte[0], -1L, new StatPersisted());
// 最新被处理的zxid
public volatile long lastProcessedZxid = 0;
  • NodeHashMap - NodeHashMapImpl实现类使用ConcurrentHashMap保存path -> DataNode数据
  • IWatchManager和Watcher - 监听器管理
  • DataNode - 封装树节点信息,包括data、children、stat等

构造方法

DataTree(DigestCalculator digestCalculator) {
    this.digestCalculator = digestCalculator;
    nodes = new NodeHashMapImpl(digestCalculator);

    // rather than fight it, let root have an alias
    nodes.put("", root); // "" -> root
    nodes.putWithoutDigest(rootZookeeper, root); // "/" -> root

    // add the proc node and quota node
    root.addChild(procChildZookeeper); // 添加zookeeper子节点
    nodes.put(procZookeeper, procDataNode); // "/zookeeper" -> procDataNode

    procDataNode.addChild(quotaChildZookeeper); // 添加quota子节点
    nodes.put(quotaZookeeper, quotaDataNode); // "/zookeeper/quota" -> quotaDataNode

    addConfigNode(); // 添加/zookeeper/config节点

    nodeDataSize.set(approximateDataSize());
    try {
        // 使用WatchManager实现类
        dataWatches = WatchManagerFactory.createWatchManager();
        childWatches = WatchManagerFactory.createWatchManager();
    } catch (Exception e) {}
}

public void addConfigNode() {
    DataNode zookeeperZnode = nodes.get(procZookeeper); // 找到/zookeeper节点
    if (zookeeperZnode != null) {
        zookeeperZnode.addChild(configChildZookeeper); // 添加config子节点
    }

    nodes.put(configZookeeper, new DataNode(new byte[0], -1L, new StatPersisted()));
    try {
        // Reconfig node is access controlled by default (ZOOKEEPER-2014).
        setACL(configZookeeper, ZooDefs.Ids.READ_ACL_UNSAFE, -1);
    } catch (NoNodeException e) {}
}

主要方法

// Add a new node to the DataTree
public void createNode(final String path, byte[] data, List<ACL> acl, long ephemeralOwner,
                       int parentCVersion, long zxid, long time, Stat outputStat);
// Remove path from the DataTree
public void deleteNode(String path, long zxid);
// 为节点设置数据
public Stat setData(String path, byte[] data, int version, long zxid, long time);
// 1. 获取path的data
// 2. 如果watcher不为null则addWatch
public byte[] getData(String path, Stat stat, Watcher watcher);
// 使用node.copyStat(stat)保存stat数据
public Stat statNode(String path, Watcher watcher);

// 1. copyStat到stat中
// 2. addWatch
// 3. getChildren
public List<String> getChildren(String path, Stat stat, Watcher watcher);

// 设置、获取权限
public Stat setACL(String path, List<ACL> acl, int version);
public List<ACL> getACL(String path, Stat stat);
public List<ACL> getACL(DataNode node);
// 添加Watcher
public void addWatch(String basePath, Watcher watcher, int mode);

// 处理事务请求
public ProcessTxnResult processTxn(TxnHeader header, Record txn, boolean isSubTxn);

// 杀会话,使用deleteNodes删除paths2DeleteLocal和paths2DeleteInTxn集
void killSession(
    long session, long zxid, Set<String> paths2DeleteLocal, List<String> paths2DeleteInTxn);
// 遍历paths2Delete调用deleteNode方法删除节点
void deleteNodes(long session, long zxid, Iterable<String> paths2Delete);
// 递归方式获取path下面的总节点数和总字节数
private void getCounts(String path, Counts counts);

// 序列化
void serializeNode(OutputArchive oa, StringBuilder path);
public void serializeNodeData(OutputArchive oa, String path, DataNode node);
public void serializeAcls(OutputArchive oa);
public void serializeNodes(OutputArchive oa);
public void serialize(OutputArchive oa, String tag);
// 反序列化
public void deserialize(InputArchive ia, String tag);
// 从dataWatches和childWatches移除watcher
public void removeCnxn(Watcher watcher);
// 触发或addWatch
public void setWatches(long relativeZxid, List<String> dataWatches,
                       List<String> existWatches, List<String> childWatches,
                       List<String> persistentWatches, List<String> persistentRecursiveWatches,
                       Watcher watcher);
// 为path设置新的cversion和zxid
public void setCversionPzxid(String path, int newCversion, long zxid);
// Add the digest to the historical list, and update the latest zxid digest
private void logZxidDigest(long zxid, long digest);
// 序列化、反序列化lastProcessedZxidDigest
public boolean serializeZxidDigest(OutputArchive oa);
public boolean deserializeZxidDigest(InputArchive ia, long startZxidOfSnapshot);
// 序列化、反序列化lastProcessedZxid
public boolean serializeLastProcessedZxid(final OutputArchive oa);
public boolean deserializeLastProcessedZxid(final InputArchive ia);
// Compares the actual tree's digest with that in the snapshot.
// Resets digestFromLoadedSnapshot after comparison.
public void compareSnapshotDigests(long zxid);
// Compares the digest of the tree with the digest present in transaction digest.
// If there is any error, logs and alerts the watchers.
public boolean compareDigest(TxnHeader header, Record txn, TxnDigest digest);

createNode方法

processTxn中会使用该方法创建节点:

public void createNode(final String path, byte[] data, List<ACL> acl,
                       long ephemeralOwner, int parentCVersion, long zxid,
                       long time, Stat outputStat) throws NoNodeException, NodeExistsException {
    int lastSlash = path.lastIndexOf('/');
    String parentName = path.substring(0, lastSlash);
    String childName = path.substring(lastSlash + 1);
    StatPersisted stat = createStat(zxid, time, ephemeralOwner); // Create a node stat
    DataNode parent = nodes.get(parentName); // 父节点需要存在
    synchronized (parent) {
        Long acls = aclCache.convertAcls(acl);

        Set<String> children = parent.getChildren(); // path节点不能存在

        nodes.preChange(parentName, parent); // 执行removeDigest
        if (parentCVersion == -1) {
            parentCVersion = parent.stat.getCversion();
            parentCVersion++; // childVersion递增
        }

        if (parentCVersion > parent.stat.getCversion()) {
            parent.stat.setCversion(parentCVersion); // 父节点的childVersion
            parent.stat.setPzxid(zxid); // 父节点processZxid
        }
        DataNode child = new DataNode(data, acls, stat);
        parent.addChild(childName); // 添加节点
        nodes.postChange(parentName, parent);
        nodeDataSize.addAndGet(getNodeSize(path, child.data));
        nodes.put(path, child); // 维护NodeHashMap
        EphemeralType ephemeralType = EphemeralType.get(ephemeralOwner);// 通常是VOID|NORMAL
        if (ephemeralType == EphemeralType.CONTAINER) {
            containers.add(path);
        } else if (ephemeralType == EphemeralType.TTL) {
            ttls.add(path);
        } else if (ephemeralOwner != 0) {
            // 维护临时节点
            HashSet<String> list = ephemerals.computeIfAbsent(ephemeralOwner, k -> new HashSet<>());
            synchronized (list) {
                list.add(path);
            }
        }
        if (outputStat != null) {
            child.copyStat(outputStat); // 把权限保存到outputStat中
        }
    }

    // 略

    // 触发监听器
    dataWatches.triggerWatch(path, Event.EventType.NodeCreated, zxid);
    childWatches.triggerWatch(
        parentName.equals("") ? "/" : parentName, Event.EventType.NodeChildrenChanged, zxid);
}

deleteNode方法

public void deleteNode(String path, long zxid) throws NoNodeException {
    int lastSlash = path.lastIndexOf('/');
    String parentName = path.substring(0, lastSlash);
    String childName = path.substring(lastSlash + 1);

    DataNode parent = nodes.get(parentName); // 父节点要存在
    synchronized (parent) {
        nodes.preChange(parentName, parent);
        parent.removeChild(childName); // 移除子节点
        if (zxid > parent.stat.getPzxid()) {
            parent.stat.setPzxid(zxid);
        }
        nodes.postChange(parentName, parent);
    }

    DataNode node = nodes.get(path); // 节点要存在
    nodes.remove(path); // 从NodeHashMap移除
    synchronized (node) {
        aclCache.removeUsage(node.acl);
        nodeDataSize.addAndGet(-getNodeSize(path, node.data));
    }

    synchronized (parent) {
        long owner = node.stat.getEphemeralOwner();
        EphemeralType ephemeralType = EphemeralType.get(owner);
        if (ephemeralType == EphemeralType.CONTAINER) {
            containers.remove(path);
        } else if (ephemeralType == EphemeralType.TTL) {
            ttls.remove(path);
        } else if (owner != 0) { // 移除临时节点
            Set<String> nodes = ephemerals.get(owner);
            if (nodes != null) {
                synchronized (nodes) {
                    nodes.remove(path);
                }
            }
        }
    }

    // 略

    // 触发监听器
    WatcherOrBitSet processed = dataWatches.triggerWatch(path, EventType.NodeDeleted, zxid);
    childWatches.triggerWatch(path, EventType.NodeDeleted, zxid, processed);
    childWatches.triggerWatch(
        "".equals(parentName) ? "/" : parentName, EventType.NodeChildrenChanged, zxid);
}

setData方法

public Stat setData(String path, byte[] data, int version, long zxid, long time) throws NoNodeException {
    Stat s = new Stat();
    DataNode n = nodes.get(path); // 节点要存在
    byte[] lastData;
    synchronized (n) {
        lastData = n.data;
        nodes.preChange(path, n);
        n.data = data; // data赋值
        n.stat.setMtime(time); // 修改时间
        n.stat.setMzxid(zxid); // 修改的zxid
        n.stat.setVersion(version); // 版本
        n.copyStat(s); // 保存stat
        nodes.postChange(path, n);
    }

    // 略
    // 触发监听器
    dataWatches.triggerWatch(path, EventType.NodeDataChanged, zxid);
    return s;
}

setAcl等acl方法

public Stat setACL(String path, List<ACL> acl, int version) throws NoNodeException {
    DataNode n = nodes.get(path);
    synchronized (n) {
        Stat stat = new Stat();
        aclCache.removeUsage(n.acl);
        nodes.preChange(path, n);
        n.stat.setAversion(version); // access时间
        n.acl = aclCache.convertAcls(acl); // 设置权限
        n.copyStat(stat);
        nodes.postChange(path, n);
        return stat;
    }
}

public List<ACL> getACL(String path, Stat stat) throws NoNodeException {
    DataNode n = nodes.get(path);
    synchronized (n) {
        if (stat != null) {
            n.copyStat(stat);
        }
        return new ArrayList<>(aclCache.convertLong(n.acl));
    }
}

public List<ACL> getACL(DataNode node) {
    synchronized (node) {
        return aclCache.convertLong(node.acl);
    }
}

addWatch方法

public void addWatch(String basePath, Watcher watcher, int mode) {
    WatcherMode watcherMode = WatcherMode.fromZooDef(mode); // PERSISTENT_RECURSIVE or PERSISTENT
    dataWatches.addWatch(basePath, watcher, watcherMode); // 只给节点添加Watcher
    if (watcherMode != WatcherMode.PERSISTENT_RECURSIVE) {
        childWatches.addWatch(basePath, watcher, watcherMode); // 递归添加Watcher
    }
}

processTxn方法

public ProcessTxnResult processTxn(TxnHeader header, Record txn, boolean isSubTxn) {
    ProcessTxnResult rc = new ProcessTxnResult();

    try {
        rc.clientId = header.getClientId();
        rc.cxid = header.getCxid();
        rc.zxid = header.getZxid();
        rc.type = header.getType();
        rc.err = 0;
        rc.multiResult = null;
        switch (header.getType()) {
        case OpCode.create: // 创建节点
            CreateTxn createTxn = (CreateTxn) txn;
            rc.path = createTxn.getPath();
            createNode(createTxn.getPath(), createTxn.getData(), createTxn.getAcl(),
                createTxn.getEphemeral() ? header.getClientId() : 0, createTxn.getParentCVersion(),
                header.getZxid(), header.getTime(), null);
            break;
        case OpCode.create2: // 创建节点并保存stat
            CreateTxn create2Txn = (CreateTxn) txn;
            rc.path = create2Txn.getPath();
            Stat stat = new Stat();
            createNode(create2Txn.getPath(), create2Txn.getData(), create2Txn.getAcl(),
                create2Txn.getEphemeral() ? header.getClientId() : 0, create2Txn.getParentCVersion(),
                header.getZxid(), header.getTime(), stat);
            rc.stat = stat;
            break;
        case OpCode.createTTL:
            CreateTTLTxn createTtlTxn = (CreateTTLTxn) txn;
            rc.path = createTtlTxn.getPath();
            stat = new Stat();
            createNode(createTtlTxn.getPath(), createTtlTxn.getData(), createTtlTxn.getAcl(),
                EphemeralType.TTL.toEphemeralOwner(createTtlTxn.getTtl()), // ttl
                createTtlTxn.getParentCVersion(), header.getZxid(), header.getTime(), stat);
            rc.stat = stat;
            break;
        case OpCode.createContainer:
            CreateContainerTxn createContainerTxn = (CreateContainerTxn) txn;
            rc.path = createContainerTxn.getPath();
            stat = new Stat();
            createNode(createContainerTxn.getPath(), createContainerTxn.getData(),
                createContainerTxn.getAcl(), EphemeralType.CONTAINER_EPHEMERAL_OWNER,
                createContainerTxn.getParentCVersion(), header.getZxid(), header.getTime(), stat);
            rc.stat = stat;
            break;
        case OpCode.delete:
        case OpCode.deleteContainer:
            DeleteTxn deleteTxn = (DeleteTxn) txn;
            rc.path = deleteTxn.getPath();
            deleteNode(deleteTxn.getPath(), header.getZxid()); // 删除节点
            break;
        case OpCode.reconfig:
        case OpCode.setData: // 设置节点数据
            SetDataTxn setDataTxn = (SetDataTxn) txn;
            rc.path = setDataTxn.getPath();
            rc.stat = setData(setDataTxn.getPath(), setDataTxn.getData(), setDataTxn.getVersion(),
                header.getZxid(), header.getTime());
            break;
        case OpCode.setACL: // 设置ACL
            SetACLTxn setACLTxn = (SetACLTxn) txn;
            rc.path = setACLTxn.getPath();
            rc.stat = setACL(setACLTxn.getPath(), setACLTxn.getAcl(), setACLTxn.getVersion());
            break;
        case OpCode.closeSession: // 关闭session
            long sessionId = header.getClientId();
            if (txn != null) {
                killSession(sessionId, header.getZxid(), ephemerals.remove(sessionId),
                        ((CloseSessionTxn) txn).getPaths2Delete());
            } else {
                killSession(sessionId, header.getZxid());
            }
            break;
        case OpCode.error:
            ErrorTxn errTxn = (ErrorTxn) txn;
            rc.err = errTxn.getErr();
            break;
        case OpCode.check:
            CheckVersionTxn checkTxn = (CheckVersionTxn) txn;
            rc.path = checkTxn.getPath();
            break;
        case OpCode.multi:
            // 遍历处理每一个Txn
            break;
        }
    } catch (KeeperException e) {
        rc.err = e.code().intValue();
    } catch (IOException e) {}

    //
    if (header.getType() == OpCode.create && rc.err == Code.NODEEXISTS.intValue()) {
        int lastSlash = rc.path.lastIndexOf('/');
        String parentName = rc.path.substring(0, lastSlash);
        CreateTxn cTxn = (CreateTxn) txn;
        try {
            setCversionPzxid(parentName, cTxn.getParentCVersion(), header.getZxid());
        } catch (NoNodeException e) {
            rc.err = e.code().intValue();
        }
    }
    //
    if (!isSubTxn) {
        if (rc.zxid > lastProcessedZxid) {
            lastProcessedZxid = rc.zxid; // 设置最新lastProcessedZxid
        }

        // 略
    }

    return rc;
}

serialize相关方法

void serializeNode(OutputArchive oa, StringBuilder path) throws IOException {
    String pathString = path.toString();
    DataNode node = getNode(pathString); // 查找节点
    String[] children;
    DataNode nodeCopy;
    synchronized (node) {
        StatPersisted statCopy = new StatPersisted();
        copyStatPersisted(node.stat, statCopy);
        // we do not need to make a copy of node.data because the contents are never changed
        nodeCopy = new DataNode(node.data, node.acl, statCopy);
        children = node.getChildren().toArray(new String[0]);
    }
    serializeNodeData(oa, pathString, nodeCopy); // 把节点写入到oa中
    path.append('/');
    int off = path.length();
    // 遍历子节点,将子节点写入oa中
    for (String child : children) {
        path.delete(off, Integer.MAX_VALUE);
        path.append(child);
        serializeNode(oa, path);
    }
}

// visible for test
public void serializeNodeData(OutputArchive oa, String path, DataNode node) throws IOException {
    oa.writeString(path, "path");
    oa.writeRecord(node, "node");
}

public void serializeAcls(OutputArchive oa) throws IOException {
    aclCache.serialize(oa);
}

// 序列化整个NodeHashMap对象
public void serializeNodes(OutputArchive oa) throws IOException {
    serializeNode(oa, new StringBuilder());
    // / marks end of stream
    // we need to check if clear had been called in between the snapshot.
    if (root != null) {
        oa.writeString("/", "path");
    }
}

// 完整序列化
public void serialize(OutputArchive oa, String tag) throws IOException {
    serializeAcls(oa);
    serializeNodes(oa);
}

deserialize相关方法

public void deserialize(InputArchive ia, String tag) throws IOException {
    aclCache.deserialize(ia);
    nodes.clear();
    pTrie.clear();
    nodeDataSize.set(0);
    String path = ia.readString("path");
    while (!"/".equals(path)) {
        DataNode node = new DataNode();
        ia.readRecord(node, "node");
        nodes.put(path, node);
        synchronized (node) {
            aclCache.addUsage(node.acl);
        }
        int lastSlash = path.lastIndexOf('/');
        if (lastSlash == -1) {
            root = node;
        } else {
            String parentPath = path.substring(0, lastSlash);
            DataNode parent = nodes.get(parentPath);
            if (parent == null) {
                throw new IOException(
                        "Invalid Datatree, unable to find parent " + parentPath + " of path " + path);
            }
            parent.addChild(path.substring(lastSlash + 1));
            long owner = node.stat.getEphemeralOwner();
            EphemeralType ephemeralType = EphemeralType.get(owner);
            if (ephemeralType == EphemeralType.CONTAINER) {
                containers.add(path);
            } else if (ephemeralType == EphemeralType.TTL) {
                ttls.add(path);
            } else if (owner != 0) {
                HashSet<String> list = ephemerals.computeIfAbsent(owner, k -> new HashSet<>());
                list.add(path);
            }
        }
        path = ia.readString("path");
    }
    // have counted digest for root node with "", ignore here to avoid counting twice for root node
    nodes.putWithoutDigest("/", root);

    nodeDataSize.set(approximateDataSize());

    // we are done with deserializing the datatree update the quotas - create path trie
    // and also update the stat nodes
    setupQuota();

    aclCache.purgeUnused();
}

FileTxnSnapLog

操作TxnLog和SnapShot的入口类。

构造方法会创建dataDir和snapDir目录,判断数据目录可写,创建txnLog和snapLog对象访问数据文件。

主要方法

// 从snapshots和transaction logs加载数据库
public long restore(DataTree dt, Map<Long, Integer> sessions, PlayBackListener listener);

// fast forward the server database to have the latest transactions in it
// This is the same as restore, but only reads from the transaction logs and not restores from a snapshot
public long fastForwardFromEdits(DataTree dt, Map<Long, Integer> sessions, PlayBackListener listener);

// 使用txnLog.read(zxid, fastForward)方法从指定zxid加载TxnIterator
public TxnIterator readTxnLog(long zxid, boolean fastForward);

// process the transaction on the datatree
public void processTransaction(TxnHeader hdr, DataTree dt, Map<Long, Integer> sessions, Record txn);

// 使用txnLog.getLastLoggedZxid()方法获取last logged zxid
public long getLastLoggedZxid();

// 把datatree和sessions保存到snapshot中
public File save(
    DataTree dataTree, ConcurrentHashMap<Long, Integer> sessionsWithTimeouts, boolean syncSnap);

// 把txnLog truncate到指定的zxid
public boolean truncateLog(long zxid);

// 使用snaplog.findMostRecentSnapshot()方法加载最近snapshot文件
public File findMostRecentSnapshot();
// 使用snaplog.findNRecentSnapshots(n)方法加载n个最近snapshot文件
public List<File> findNRecentSnapshots(int n);
// 使用snaplog.findNValidSnapshots(n)方法加载n个合法snapshot文件
public List<File> findNValidSnapshots(int n);

// 获取快照文件,可能包含比给定zxid更新的事务。
// 包括起始zxid大于给定zxid的日志,以及起始zxid小于给定zxid的最新事务日志。
// 后一个日志文件可能包含超出给定zxid的事务。
public File[] getSnapshotLogs(long zxid);

// 使用txnLog.append(si)追加数据
public boolean append(Request si);
// txnLog.commit()提交数据
public void commit();

restore方法

  1. 从snapshot加载dataTree数据
  2. 从txnlog加载dataTree和committedlog数据
  3. 如果没有加载到dataTree数据,将空的dataTree数据保存到snapshot.0文件中

fastForwardFromEdits方法

从txnlog加载dataTree和committedlog数据。

processTransaction方法

public void processTransaction(TxnHeader hdr, DataTree dt, Map<Long, Integer> sessions,
        Record txn) throws KeeperException.NoNodeException {
    ProcessTxnResult rc;
    switch (hdr.getType()) {
    case OpCode.createSession:
        sessions.put(hdr.getClientId(), ((CreateSessionTxn) txn).getTimeOut());
        // give dataTree a chance to sync its lastProcessedZxid
        rc = dt.processTxn(hdr, txn);
        break;
    case OpCode.closeSession:
        sessions.remove(hdr.getClientId());
        rc = dt.processTxn(hdr, txn);
        break;
    default:
        rc = dt.processTxn(hdr, txn);
    }
}

save方法

public File save(DataTree dataTree, ConcurrentHashMap<Long, Integer> sessionsWithTimeouts,
        boolean syncSnap) throws IOException {
    long lastZxid = dataTree.lastProcessedZxid;
    // 文件名snapshot.${lastZxid}
    File snapshotFile = new File(snapDir, Util.makeSnapshotName(lastZxid));
    try {
        snapLog.serialize(dataTree, sessionsWithTimeouts, snapshotFile, syncSnap);
        return snapshotFile;
    } catch (IOException e) {
        throw e;
    }
}

truncateLog方法

public boolean truncateLog(long zxid) {
    try {
        // close the existing txnLog and snapLog
        close();

        // truncate it
        try (FileTxnLog truncLog = new FileTxnLog(dataDir)) {
            boolean truncated = truncLog.truncate(zxid);

            // re-open the txnLog and snapLog
            // I'd rather just close/reopen this object itself, however that
            // would have a big impact outside ZKDatabase as there are other
            // objects holding a reference to this object.
            txnLog = new FileTxnLog(dataDir);
            snapLog = new FileSnap(snapDir);

            return truncated;
        }
    } catch (IOException e) {
        return false;
    }
}

TxnLog接口和FileTxnLog实现类

txnlog

使用文件保存所有的事务操作,客户端的写操作会先写入txnlog文件,在follower达到quorum状态后提交到dataTree中,在ZKDatabase启动阶段,如果txnlog的zxid大于snapshot的zxid时,会加载txnlog文件数据回放事务,提交到dataTree中。

TxnLog接口

Interface for reading transaction logs.

public interface TxnLog extends Closeable {

    // Setter for ServerStats to monitor fsync threshold exceed
    void setServerStats(ServerStats serverStats);

    // roll the current log being appended to
    void rollLog() throws IOException;

    // Append a request to the transaction log with a digset
    boolean append(Request request) throws IOException;

    // Start reading the transaction logs from a given zxid
    TxnIterator read(long zxid) throws IOException;

    // the last zxid of the logged transactions
    long getLastLoggedZxid() throws IOException;

    // truncate the log to get in sync with the leader
    boolean truncate(long zxid) throws IOException;

    // the dbid for this transaction log
    long getDbId() throws IOException;

    // commit the transaction and make sure they are persisted
    void commit() throws IOException;

    // return transaction log's elapsed sync time in milliseconds
    long getTxnLogSyncElapsedTime();

    void close() throws IOException;
    void setTotalLogSize(long size);
    long getTotalLogSize();
}

FileTxnLog实现类

This class implements the TxnLog interface. It provides api's to access the txnlogs and add entries to it.
The format of a Transactional log is as follows:

   LogFile:
       FileHeader TxnList ZeroPad

   FileHeader: {
       magic 4bytes (ZKLG)
       version 4bytes
       dbid 8bytes
   }

   TxnList:
       Txn || Txn TxnList

   Txn:
       checksum Txnlen TxnHeader Record 0x42

   checksum: 8bytes Adler32 is currently used
     calculated across payload -- Txnlen, TxnHeader, Record and 0x42

   Txnlen:
       len 4bytes

   TxnHeader: {
       sessionid 8bytes
       cxid 4bytes
       zxid 8bytes
       time 8bytes
       type 4bytes
   }

   Record:
       See Jute definition file for details on the various record types

   ZeroPad:
       0 padded to EOF (filled during preallocation stage)

FileTxnLog主要方法实现

public synchronized boolean append(Request request) throws IOException {
    TxnHeader hdr = request.getHdr();
    if (hdr == null) { // 不是事务请求
        return false;
    }
    if (hdr.getZxid() <= lastZxidSeen) {
        LOG.warn("...");
    } else {
        lastZxidSeen = hdr.getZxid();
    }
    if (logStream == null) {
        // 创建新log.${hdr.zxid}文件
        logFileWrite = new File(logDir, Util.makeLogName(hdr.getZxid()));
        fos = new FileOutputStream(logFileWrite);
        logStream = new BufferedOutputStream(fos);
        oa = BinaryOutputArchive.getArchive(logStream);
        FileHeader fhdr = new FileHeader(TXNLOG_MAGIC, VERSION, dbId); // 文件头
        long dataSize = oa.getDataSize();
        fhdr.serialize(oa, "fileheader"); // 写文件头
        logStream.flush();
        // 文件偏移量
        filePosition += oa.getDataSize() - dataSize;
        filePadding.setCurrentSize(filePosition);
        streamsToFlush.add(fos);
    }
    fileSize = filePadding.padFile(fos.getChannel(), filePosition);
    byte[] buf = request.getSerializeData();
    long dataSize = oa.getDataSize();
    Checksum crc = makeChecksumAlgorithm();
    crc.update(buf, 0, buf.length);
    oa.writeLong(crc.getValue(), "txnEntryCRC"); // checksum
    Util.writeTxnBytes(oa, buf); // 写len, hdr, txn, digest, 0x42
    unFlushedSize += oa.getDataSize() - dataSize; // 计算未flush字节数
    return true;
}

public long getLastLoggedZxid() {
    File[] files = getLogFiles(logDir.listFiles(), 0);
    long maxLog = files.length > 0 ?
        Util.getZxidFromName(files[files.length - 1].getName(), LOG_FILE_PREFIX) : -1;
    // 最新的log文件的后缀作为zxid
    long zxid = maxLog;
    // 从文件解析最新zxid
    try (FileTxnLog txn = new FileTxnLog(logDir); TxnIterator itr = txn.read(maxLog)) {
        while (true) {
            if (!itr.next()) {
                break;
            }
            TxnHeader hdr = itr.getHeader();
            zxid = hdr.getZxid();
        }
    } catch (IOException e) {
    }
    return zxid;
}

public synchronized void rollLog() throws IOException {
    if (logStream != null) {
        this.logStream.flush(); // 把当前文件刷写出去
        prevLogsRunningTotal += getCurrentLogSize();
        this.logStream = null; // 重置相关变量,后续append时会创建新的文件
        oa = null;
        fileSize = 0;
        filePosition = 0;
        unFlushedSize = 0;
    }
}

public synchronized void commit() throws IOException {
    if (logStream != null) {
        logStream.flush(); // 刷写文件
        filePosition += unFlushedSize;
        // If we have written more than we have previously preallocated,
        // we should override the fileSize by filePosition.
        if (filePosition > fileSize) {
            fileSize = filePosition;
        }
        unFlushedSize = 0;
    }
    for (FileOutputStream log : streamsToFlush) {
        log.flush(); // 刷写文件
        if (forceSync) {
            long startSyncNS = System.nanoTime();

            FileChannel channel = log.getChannel();
            channel.force(false);

            // 略
        }
    }
    // 关闭文件流
    while (streamsToFlush.size() > 1) {
        streamsToFlush.poll().close();
    }

    // Roll the log file if we exceed the size limit
    if (txnLogSizeLimit > 0) { // 默认-1分支进不来
        long logSize = getCurrentLogSize();
        if (logSize > txnLogSizeLimit) {
            rollLog();
        }
    }
}

// FileTxnIterator封装logFile和输入流对象,可以按照协议从文件流读取txnLog数据
public TxnIterator read(long zxid) throws IOException {
    return read(zxid, true);
}
public TxnIterator read(long zxid, boolean fastForward) throws IOException {
    return new FileTxnIterator(logDir, zxid, fastForward);
}

// 将log文件truncate到指定zxid位置
public boolean truncate(long zxid) throws IOException {
    try (FileTxnIterator itr = new FileTxnIterator(this.logDir, zxid)) {
        PositionInputStream input = itr.inputStream;
        if (input == null) {
            throw new IOException("No log files found to truncate");
        }
        long pos = input.getPosition();
        // now, truncate at the current position
        RandomAccessFile raf = new RandomAccessFile(itr.logFile, "rw");
        raf.setLength(pos);
        raf.close(); // 把最小的文件truncate到指定zxid位置
        while (itr.goToNextLog()) { // 删除所有>zxid的log文件
            if (!itr.logFile.delete()) {
            }
        }
    }
    return true;
}

private static FileHeader readHeader(File file) throws IOException {
    InputStream is = null;
    try {
        is = new BufferedInputStream(new FileInputStream(file));
        InputArchive ia = BinaryInputArchive.getArchive(is);
        FileHeader hdr = new FileHeader();
        hdr.deserialize(ia, "fileheader"); // 反序列化
        return hdr;
    } finally {
        // is.close();
    }
}

FileTxnIterator类

this class implements the txnlog iterator interface which is used for reading the transaction logs.

内部使用List保存着比指定zxid大或者含有指定zxid数据的log文件,初始化阶段会定位到参数zxid指定的位置,这样在后续访问时就可以从参数指定的zxid开始读取数据了。

public FileTxnIterator(File logDir, long zxid, boolean fastForward) throws IOException {
    this.logDir = logDir;
    this.zxid = zxid;
    init();

    if (fastForward && hdr != null) {
        while (hdr.getZxid() < zxid) { // 这里将数据移动到zxid位置
            if (!next()) {
                break;
            }
        }
    }
}

void init() throws IOException {
    storedFiles = new ArrayList<>();
    // 倒序查找log文件
    List<File> files = Util.sortDataDir(
        FileTxnLog.getLogFiles(logDir.listFiles(), 0),
        LOG_FILE_PREFIX,
        false);
    for (File f : files) {
        if (Util.getZxidFromName(f.getName(), LOG_FILE_PREFIX) >= zxid) {
            storedFiles.add(f);
        } else if (Util.getZxidFromName(f.getName(), LOG_FILE_PREFIX) < zxid) {
            // add the last logfile that is less than the zxid
            storedFiles.add(f);
            break;
        }
    }
    goToNextLog(); // 定位到下一个文件
    next(); // 定位到下一个log数据
}

SnapShot接口和FileSnap实现类

SnapShot接口

snapshot interface for the persistence layer. implement this interface for implementing snapshots.

public interface SnapShot {

    // deserialize a data tree from the last valid snapshot and return the last zxid that was deserialized
    long deserialize(DataTree dt, Map<Long, Integer> sessions) throws IOException;

    // persist the datatree and the sessions into a persistence storage
    void serialize(DataTree dt, Map<Long, Integer> sessions, File name, boolean fsync) throws IOException;

    // find the most recent snapshot file
    File findMostRecentSnapshot() throws IOException;

    // get information of the last saved/restored snapshot
    SnapshotInfo getLastSnapshotInfo();

    // free resources from this snapshot immediately
    void close() throws IOException;
}

FileSnap实现类

负责存储、序列化和反序列化正确的快照。并提供对快照的访问:

public long deserialize(DataTree dt, Map<Long, Integer> sessions) throws IOException {
    // 在snapDir下查找合法的快照文件,倒序,所以最新的在前面
    List<File> snapList = findNValidSnapshots(100);
    File snap = null;
    long snapZxid = -1;
    boolean foundValid = false;
    for (int i = 0, snapListSize = snapList.size(); i < snapListSize; i++) {
        snap = snapList.get(i);
        snapZxid = Util.getZxidFromName(snap.getName(), SNAPSHOT_FILE_PREFIX);
        try (CheckedInputStream snapIS = SnapStream.getInputStream(snap)) {
            InputArchive ia = BinaryInputArchive.getArchive(snapIS);
            deserialize(dt, sessions, ia); // 将数据反序列到dt
            SnapStream.checkSealIntegrity(snapIS, ia);

            // Deserializing the zxid digest from the input
            // stream and update the digestFromLoadedSnapshot.
            // 格式: zxid digestVersion digest
            if (dt.deserializeZxidDigest(ia, snapZxid)) {
                SnapStream.checkSealIntegrity(snapIS, ia);
            }

            // deserialize lastProcessedZxid and check inconsistency
            // 读lastZxid字段得到
            if (dt.deserializeLastProcessedZxid(ia)) {
                SnapStream.checkSealIntegrity(snapIS, ia);
            }

            foundValid = true;
            break;
        } catch (IOException e) {}
    }
    // 验证foundValid
    // 上次处理到的zxid
    dt.lastProcessedZxid = snapZxid;
    lastSnapshotInfo = new SnapshotInfo(dt.lastProcessedZxid, snap.lastModified() / 1000);

    // compare the digest if this is not a fuzzy snapshot, we want to compare and find inconsistent asap
    if (dt.getDigestFromLoadedSnapshot() != null) {
        dt.compareSnapshotDigests(dt.lastProcessedZxid);
    }
    return dt.lastProcessedZxid;
}

public static void deserialize(
        DataTree dt, Map<Long, Integer> sessions, InputArchive ia) throws IOException {
    FileHeader header = new FileHeader(); // magic, version, dbid
    header.deserialize(ia, "fileheader"); // 解析文件头并验证magic
    if (header.getMagic() != SNAP_MAGIC) {
        throw new IOException("mismatching magic headers");
    }
    // 反序列化
    // 会话:
    //   Count Session(s)
    //   Session {id, timeout}
    // 节点:
    //   AclCache PathNode(s)
    //   PathNode {path, node}
    //   node {data, acl, stat}
    SerializeUtils.deserializeSnapshot(dt, ia, sessions);
}

protected List<File> findNValidSnapshots(int n) {
    // 在snapDir下查找快照文件,倒序,最新的在前面
    List<File> files = Util.sortDataDir(snapDir.listFiles(), SNAPSHOT_FILE_PREFIX, false);
    int count = 0;
    List<File> list = new ArrayList<>();
    for (File f : files) {
        try {
            if (SnapStream.isValidSnapshot(f)) { // 验证文件合法
                list.add(f);
                count++;
                if (count == n) {
                    break;
                }
            }
        } catch (IOException e) {}
    }
    return list;
}

public List<File> findNRecentSnapshots(int n) throws IOException {
    // 在snapDir下查找快照文件,倒序,最新的在前面
    List<File> files = Util.sortDataDir(snapDir.listFiles(), SNAPSHOT_FILE_PREFIX, false);
    int count = 0;
    List<File> list = new ArrayList<>();
    for (File f : files) {
        if (count == n) {
            break;
        }
        if (Util.getZxidFromName(f.getName(), SNAPSHOT_FILE_PREFIX) != -1) {
            count++;
            list.add(f);
        }
    }
    return list;
}

protected void serialize(
        DataTree dt, Map<Long, Integer> sessions, OutputArchive oa, FileHeader header) throws IOException {
    // 验证header!=null
    header.serialize(oa, "fileheader"); // 序列化文件头
    SerializeUtils.serializeSnapshot(dt, oa, sessions); // 序列化dataTree
}

public synchronized void serialize(
        DataTree dt, Map<Long, Integer> sessions, File snapShot, boolean fsync) throws IOException {
    if (!close) {
        try (CheckedOutputStream snapOS = SnapStream.getOutputStream(snapShot, fsync)) {
            OutputArchive oa = BinaryOutputArchive.getArchive(snapOS);
            FileHeader header = new FileHeader(SNAP_MAGIC, VERSION, dbId);
            serialize(dt, sessions, oa, header);
            SnapStream.sealStream(snapOS, oa);

            // 序列化digest
            if (dt.serializeZxidDigest(oa)) {
                SnapStream.sealStream(snapOS, oa);
            }

            // 序列化lastProcessZxid
            if (dt.serializeLastProcessedZxid(oa)) {
                SnapStream.sealStream(snapOS, oa);
            }

            lastSnapshotInfo = new SnapshotInfo(
                Util.getZxidFromName(snapShot.getName(), SNAPSHOT_FILE_PREFIX),
                snapShot.lastModified() / 1000);
        }
    } else {
        throw new IOException("FileSnap has already been closed");
    }
}

DatadirCleanupManager

启动周期任务

清理过期文件,保留最新的snapRetainCount个snapshot文件和对应的txnlog文件,将其余过期的文件删除掉。

purgeInterval参数指定执行周期(小时),默认0不开启清理功能。

public void start() {
    if (PurgeTaskStatus.STARTED == purgeTaskStatus) {
        return;
    }
    // Don't schedule the purge task with zero or negative purge interval.
    if (purgeInterval <= 0) {
        return;
    }

    timer = new Timer("PurgeTask", true);
    TimerTask task = new PurgeTask(dataLogDir, snapDir, snapRetainCount);
    timer.scheduleAtFixedRate(task, 0, TimeUnit.HOURS.toMillis(purgeInterval));

    purgeTaskStatus = PurgeTaskStatus.STARTED;
}

PurgeTask

public void run() {
    try {
        PurgeTxnLog.purge(logsDir, snapsDir, snapRetainCount);
    } catch (Exception e) {}
}

PurgeTxnLog.purge方法:

public static void purge(File dataDir, File snapDir, int num) throws IOException {
    if (num < 3) {
        throw new IllegalArgumentException(COUNT_ERR_MSG);
    }

    FileTxnSnapLog txnLog = new FileTxnSnapLog(dataDir, snapDir);

    // 倒序查找最新的num个snapshot文件
    List<File> snaps = txnLog.findNValidSnapshots(num);
    int numSnaps = snaps.size();
    if (numSnaps > 0) {
        // 删除掉zxid比snaps小的txnlog和snapshot文件
        purgeOlderSnapshots(txnLog, snaps.get(numSnaps - 1));
    }
}

ContainerManager

负责清理container节点,只能有leader管理。启动后,定期检查cversion>0且没有子级的container节点和ttl节点。尝试删除节点,删除的结果并不重要。如果提议失败或容器节点不为空,则没有任何危害。

你可能感兴趣的:(zookeeper,分布式组件,Spring,Cloud,zookeeper,spring,cloud,分布式)