NET TIME and w32time
It seems there is a bit of ambiguity out there regarding the relationship between w32time and the NET TIME command. Well, here are the answers, straight from the horse's mouth.
Taking it from the top
As all of you know (or at least should) know by now, w32time is the Windows Time Service, which is an independent service that runs on nearly all Windows computers from Windows 2000 onward. It is comprised of the time service (aka w32time) and the w32tm.exe user-mode application for management and troubleshooting. The service communicates on port 123 via UDP for time synchronization using the NTP protocol. Communication between w32tm.exe and the time service uses a custom RPC interface.
In contrast, NET TIME (or more appropriately, the net.exe application) is a user-mode tool for verifying the time on a remote computer using a totally separate mechanism. The net.exe application lives in the System32 directory and is a jack-of-all-trades tool for changing various configuration elements of the operating system.
How the NET TIME command works
The net.exe application has been around for a long time, perhaps even pre-Windows 2000. All of the functionality in the net.exe application revolves around the Net* functions exposed in the NetApi32.dll library. This includes a number of really powerful functions such as NetUserAdd, NetUserChangePassword, NetJoinDomain, and other such functions. Among the list of functions is the NetRemoteTOD function, which is exposed via NET TIME. This function can be called locally on a computer to get the time on a remote system using RPC. Now, you may be saying "Ryan, why would I use the NET TIME command when I can call 'w32tm.exe /stripchart' and get essentially the same information, but more accurately?" I'm glad you asked!
Let's take a moment and read a sentence from that last paragraph again. The NetRemoteTOD function can be called locally on a computer to get the time on a remote system using RPC. The important part is that this communication occurs using RPC, not NTP, which is why the NET TIME command is still useful today. Let's say that for some reason the time service wasn't running on a particular computer, perhaps because it had (gasp!) crashed or (double-gasp) was mis-configured and was not running. Well, if you need to check the time on that system, you are out of luck with w32tm.exe. Because w32tm.exe uses NTP to check the time on a remote system, the time service needs to be running on that remote system in order for the time check to work. By comparison, since the NetRemoteTOD facility uses RPC, the remote system only needs to have the RPC service running on a remote system in order to check the time. This is the power of NET TIME.
The NET TIME command is however not perfect. In a typical environment, domain controllers (which are the typical target of a NetRemoteTOD call) might not be accessible from every machine on the domain. On the other hand, UDP 123 which is used by the time service is rarely blocked.
How to use the NET TIME command
The net.exe application the following syntax:
C:>net
The syntax of this command is:NET
[ ACCOUNTS | COMPUTER | CONFIG | CONTINUE | FILE | GROUP | HELP |
HELPMSG | LOCALGROUP | PAUSE | SESSION | SHARE | START |
STATISTICS | STOP | TIME | USE | USER | VIEW ]
We are particularly interested in the 'TIME' argument, which has the following syntax (note that this is the output according to Windows7):
C:>net help time
The syntax of this command is:NET TIME
[\computername | /DOMAIN[:domainname] | /RTSDOMAIN[:domainname]] [/SET]
NET TIME synchronizes the computer's clock with that of another computer
or domain, or displays the time for a computer or domain. When used without
options on a Windows Server domain, it displays the current
date and time at the computer designated as the time server for the domain.\computername Is the name of the computer you want to check or
synchronize with./DOMAIN[:domainname] Specifies to synchronize the time from the Primary Domain
Controller of domainname./RTSDOMAIN[:domainname] Specifies to synchronize with a Reliable Time Server
from domainname./SET Synchronizes the computer's time with the time
on the specified computer or domain.The /QUERYSNTP and /SETSNTP options have been deprecated. Please use w32tm.exe
to configure the Windows Time Service.NET HELP command | MORE displays Help one screen at a time.
As you can see, there are a number of options here, all of which deserve some explanation. By default, when you run the NET TIME command without any arguments, it will attempt to locate a domain controller (using DC Locator) and then use NetRemoteTOD to get the time on that DC.
The NET TIME command exposes three switches which can be used to control it's behavior. The /DOMAIN option can be used to specify the name of a domain in which to locate a domain controller to talk to by requesting a domain controller with the TIMESERV flag set in NetLogon. The /RTSDOMAIN option works the same way, except that it requests a domain controller with the GTIMESERV flag set instead. The /SET command can be used to update the clock on the local computer to match the time stamp returned by the remote computer.
Finally, you can call the NET TIME command with the name of a machine on your network to force NET TIME to get the time of that machine, rather than locating a domain controller.
You may also notice that the /QUERYSNTP and /SETSNTP flags are also included with the NET TIME command. Prior to the days of w32tm.exe, these commands were used to configured the server that w32time would synchronize with. Since w32tm.exe handles this work now, the /QUERYSNTP and /SETSNTP arguments have been deprecated.
Putting it in practice
By calling the NET TIME command without any arguments, we will get the time according to a domain controller in the domain. The domain controller that is chosen is completely arbitrary - there is no guarantee that you will get a specific DC, only that it will have the TIMESERV flag set, saying that it is a time server for the domain.
C:>net time
Current time at \DC-01.mydomain.com is 8/7/2009 10:01:42 AM
If we use the /DOMAIN flag, we can specify the domain that we want to query:
C:>net time /DOMAIN:mydomain.com
Current time at \DC-01.mydomain.com is 8/7/2009 10:04:12 AM
Additionally, we can query the domain controller directly:
C:>net time \DC-01.mydomain.com
Current time at \DC-01.mydomain.com is 8/7/2009 10:06:01 AM
In fact, the machine that we query doesn't need to be a domain controller. I could just as easily query my local machine using the NetRemoteTOD facility:
C:>net time \localhost
Current time at \localhost is 8/7/2009 10:12:11 AM
Note: Keep in mind that unless you explicitly specify the name of the machine you want to query, the NET TIME command will locate a time source using DC Locator. If the time service has failed for one reason or another, the TIMESERV flag will likely NOT be set for that machine. However, you can still query the machine explicitly and you will still be able to check the time on that machine.
Conclusion
As always, I try to anticipate any questions you might have regarding the content here. However, if you do have any questions or feel that I have missed something, please post a comment below. If you have a general question about the time service, I encourage you to ask it in the forums.
LINK: https://docs.microsoft.com/zh-cn/archive/blogs/w32time/net-time-and-w32time