1，jmeter
1.新建测试计划-add thread group-add samler http request
2. Add backend listener
这里有两种方式：influxdb和Graphite，两种都可以用，区别是传递到influxdb的数据存储不一样
2，influxdb
1.下载
wget https://dl.influxdata.com/influxdb/releases/influxdb-1.8.0.x86_64.rpm
sudo yum localinstall influxdb-1.8.0.x86_64.rpm
[if !supportLists]l [endif]修改配置文件
Vi /etc/influxdb/influxdb.conf
这里修改是为了打开，jmeter写入数据的配置：
1，influxdb
找到http配置
[http]
# Determines whether HTTP endpoint is enabled.
enabled = true
# Determines whether the Flux query endpoint is enabled.
flux-enabled = true
# Determines whether the Flux query logging is enabled.
flux-log-enabled = true
# The bind address used by the HTTP service.
bind-address = ":8086"
# Determines whether user authentication is enabled over HTTP/HTTPS.
auth-enabled = true
# The default realm sent back when issuing a basic auth challenge.
realm = "InfluxDB"
# Determines whether HTTP request logging is enabled.
log-enabled = true
# Determines whether the HTTP write request logs should be suppressed when the log is enabled.
suppress-write-log = true
# When HTTP request logging is enabled, this option specifies the path where
# log entries should be written. If unspecified, the default is to write to stderr, which
# intermingles HTTP logs with internal InfluxDB logging.
# If influxd is unable to access the specified path, it will log an error and fall back to writing
# the request log to stderr.
# access-log-path = ""
# Filters which requests should be logged. Each filter is of the pattern NNN, NNX, or NXX where N is
# a number and X is a wildcard for any number. To filter all 5xx responses, use the string 5xx.
# If multiple filters are used, then only one has to match. The default is to have no filters which
# will cause every request to be printed.
# access-log-status-filters = []
# Determines whether detailed write logging is enabled.
write-tracing = true
# Determines whether the pprof endpoint is enabled. This endpoint is used for
# troubleshooting and monitoring.
pprof-enabled = true
# Enables authentication on pprof endpoints. Users will need admin permissions
# to access the pprof endpoints when this setting is enabled. This setting has
# no effect if either auth-enabled or pprof-enabled are set to false.
pprof-auth-enabled = true
# Enables a pprof endpoint that binds to localhost:6060 immediately on startup.
# This is only needed to debug startup issues.
# debug-pprof-enabled = false
# Enables authentication on the /ping, /metrics, and deprecated /status
# endpoints. This setting has no effect if auth-enabled is set to false.
ping-auth-enabled = true
# Determines whether HTTPS is enabled.
https-enabled = true
2,graphite
[[graphite]]
# Determines whether the graphite endpoint is enabled.
enabled = true
database = "jmeter"
# retention-policy = ""
bind-address = ":2003"
protocol = "tcp"
consistency-level = "one"
3.数据库启动
sudo service influxdb start
命令行输入influx进入数据库，设置用户和数据库
#创建数据库
create database "jmeter"
create user "xxx" with password 'xxx' with all privileges
#显示所有的数据库
show databases
#删除数据库
drop database "db_name"
#使用数据库
use jmeter
#显示该数据库中所有的表
show measurements
#删除表
drop measurement "measurement_name"
3, grafana
1.下载/安装
#下载、解压、创建软链接
wget https://github.com/prometheus/prometheus/releases/download/v2.22.0/prometheus-2.22.0.linux-amd64.tar.gz
tar -xf prometheus-2.22.0.linux-amd64.tar.gz
mv prometheus-2.22.0.linux-amd64 /usr/local/
ln -s /usr/local/prometheus-2.22.0.linux-amd64/ /usr/local/prometheus
关闭服务
kill -TERM pid
systemctl start grafana-server
systemctl status grafana-server
systemctl enable grafana-server
访问
http://xxx:3000/输入用户密码默认为admin/admin
添加influxdb数据源
添加看板
我们可以去grafana官网找到我们想要的看板，然后导入
大功告成