RAID磁盘阵列部署和管理
服务器制作raid磁盘阵列并管理
目标：
（1）掌握 RAID 的构建，挂载和使用。
（2）掌握 RAID 的基础运维。
基础准备
安装CentOS 7操作系统主机，并添加4块20 GB硬盘。
案例实施
创建raid 0
利用磁盘分区新建2个磁盘分区，每个大小为20 GB。用这2个20 GB的分区来模拟1个40 GB的硬盘。
安装mdadm
[root@server ~]# yum install -y mdadm
查看磁盘情况
[root@server ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 20G 0 disk
├─sda1 8:1 0 1G 0 part /boot
└─sda2 8:2 0 19G 0 part
├─centos-root 253:0 0 17G 0 lvm /
└─centos-swap 253:1 0 2G 0 lvm [SWAP]
sdb 8:16 0 20G 0 disk
sdc 8:32 0 20G 0 disk
sdd 8:48 0 20G 0 disk
sr0 11:0 1 4.4G 0 rom
创建raid0
命令解析：
-C v：创建设备，并显示信息。
-l 0：RAID 的等级为 RAID 0。
-n 2：创建 RAID 的设备为 2 块。
[root@server ~]# mdadm -C -v /dev/md0 -l 0 -n 2 /dev/sdb /dev/sdc
mdadm: chunk size defaults to 512K
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md0 started.
[root@server ~]# cat /proc/mdstat
Personalities : [raid0]
md0 : active raid0 sdc[1] sdb[0]
41908224 blocks super 1.2 512k chunks
unused devices:
查看raid详细情况
[root@server ~]# mdadm -Ds
ARRAY /dev/md0 metadata=1.2 name=server:0 UUID=64847141:b25b51ed:782a178f:9234c29a
[root@server ~]# mdadm -D /dev/md0
/dev/md0:
Version : 1.2
Creation Time : Mon Jun 6 21:15:25 2022
Raid Level : raid0
Array Size : 41908224 (39.97 GiB 42.91 GB)
Raid Devices : 2
Total Devices : 2
Persistence : Superblock is persistent
Update Time : Mon Jun 6 21:15:25 2022
State : clean
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
Chunk Size : 512K
Consistency Policy : none
Name : server:0 (local to host server)
UUID : 64847141:b25b51ed:782a178f:9234c29a
Events : 0
Number Major Minor RaidDevice State
0 8 16 0 active sync /dev/sdb
1 8 32 1 active sync /dev/sdc
生成配置文件mdadm.conf
对创建的raid进行文件系统创建并挂载
[root@server ~]# mdadm -Ds > /etc/mdadm.conf
[root@server ~]# mkfs.xfs /dev/md0
meta-data=/dev/md0 isize=512 agcount=16, agsize=654720 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=0, sparse=0
data = bsize=4096 blocks=10475520, imaxpct=25
= sunit=128 swidth=256 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1
log =internal log bsize=4096 blocks=5120, version=2
= sectsz=512 sunit=8 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
[root@server ~]# mkdir /raid0/
[root@server ~]# mount /dev/md0 /raid0/
[root@server ~]# df -Th /raid0/
文件系统 类型 容量 已用 可用 已用% 挂载点
/dev/md0 xfs 40G 33M 40G 1% /raid0
设置开机自动挂载
[root@server ~]# blkid /dev/md0
/dev/md0: UUID="fb70d40a-51f1-43fc-9a72-020acb241ece" TYPE="xfs"
[root@server ~]# echo "UUID=fb70d40a-51f1-43fc-9a72-020acb241ece /raid0 xfs
defaults 0 0" >> /etc/fstab
删除riaid操作
[root@server ~]# umount /raid0/
[root@server ~]# mdadm -S /dev/md0
mdadm: stopped /dev/md0
[root@server ~]# rm -rf /etc/mdadm.conf
[root@server ~]# rm -rf /raid0/
[root@server ~]# mdadm --zero-superblock /dev/sdb
[root@server ~]# mdadm --zero-superblock /dev/sdc
[root@server ~]# vi /etc/fstab
UUID=fb70d40a-51f1-43fc-9a72-020acb241ece /raid0 xfs defaults 0 0（去掉此行）
raid 5运维操作
利用磁盘分区新建4个磁盘分区，每个大小为20 GB。用3个20 GB的分区来模拟raid 5，加一个热备盘。
[root@localhost ~]# mdadm -Cv /dev/md5 -l5 -n3 /dev/sdb /dev/sdc /dev/sdd --spare-devices=1 /dev/sde
mdadm: layout defaults to left-symmetric
mdadm: layout defaults to left-symmetric
mdadm: chunk size defaults to 512K
mdadm: size set to 20954112K
mdadm: Fail create md5 when using /sys/module/md_mod/parameters/new_array
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md5 started.
查看RAID的详细信息，命令如下。
[root@localhost ~]# mdadm -D /dev/md5
/dev/md5:
Version : 1.2
Creation Time : Sat Oct 5 13:17:41 2019
Raid Level : raid5
Array Size : 41908224 (39.97 GiB 42.91 GB)
Used Dev Size : 20954112 (19.98 GiB 21.46 GB)
Raid Devices : 3
Total Devices : 4
Persistence : Superblock is persistent
Update Time : Sat Oct 5 13:19:27 2019
State : clean
Active Devices : 3
Working Devices : 4
Failed Devices : 0
Spare Devices : 1
Layout : left-symmetric
Chunk Size : 512K
Consistency Policy : unknown
Name : localhost.localdomain:5 (local to host localhost.localdomain)
UUID : f51467bd:1199242b:bcb73c7c:160d523a
Events : 18
Number Major Minor RaidDevice State
0 8 16 0 active sync /dev/sdb
1 8 32 1 active sync /dev/sdc
4 8 48 2 active sync /dev/sdd
3 8 64 - spare /dev/sde
模拟硬盘故障
[root@localhost ~]# mdadm -f /dev/md5 /dev/sdb
mdadm: set /dev/sdb faulty in /dev/md5
查看RAID的详细信息，命令如下。
[root@localhost ~]# mdadm -D /dev/md5
/dev/md5:
Version : 1.2
Creation Time : Sat Oct 5 13:17:41 2019
Raid Level : raid5
Array Size : 41908224 (39.97 GiB 42.91 GB)
Used Dev Size : 20954112 (19.98 GiB 21.46 GB)
Raid Devices : 3
Total Devices : 4
Persistence : Superblock is persistent
Update Time : Sat Oct 5 13:28:54 2019
State : clean
Active Devices : 3
Working Devices : 3
Failed Devices : 1
Spare Devices : 0
Layout : left-symmetric
Chunk Size : 512K
Consistency Policy : unknown
Name : localhost.localdomain:5 (local to host localhost.localdomain)
UUID : f51467bd:1199242b:bcb73c7c:160d523a
Events : 37
Number Major Minor RaidDevice State
3 8 64 0 active sync /dev/sde
1 8 32 1 active sync /dev/sdc
4 8 48 2 active sync /dev/sdd
0 8 16 - faulty /dev/sdb
从以上结果可以发现原来的热备盘/dev/sde正在参与RAID 5的重建，而原来的/dev/sdb变成了坏盘。
热移除故障盘，命令如下：
[root@localhost ~]# mdadm -r /dev/md5 /dev/sdb
mdadm: hot removed /dev/sdb from /dev/md5
查看RAID的详细信息，命令如下：
[root@localhost ~]# mdadm -D /dev/md5
/dev/md5:
Version : 1.2
Creation Time : Sat Oct 5 13:17:41 2019
Raid Level : raid5
Array Size : 41908224 (39.97 GiB 42.91 GB)
Used Dev Size : 20954112 (19.98 GiB 21.46 GB)
Raid Devices : 3
Total Devices : 3
Persistence : Superblock is persistent
Update Time : Sat Oct 5 13:35:54 2019
State : clean
Active Devices : 3
Working Devices : 3
Failed Devices : 0
Spare Devices : 0
Layout : left-symmetric
Chunk Size : 512K
Consistency Policy : unknown
Name : localhost.localdomain:5 (local to host localhost.localdomain)
UUID : f51467bd:1199242b:bcb73c7c:160d523a
Events : 38
Number Major Minor RaidDevice State
3 8 64 0 active sync /dev/sde
1 8 32 1 active sync /dev/sdc
4 8 48 2 active sync /dev/sdd
格式化RAID并进行挂载，命令如下：
[root@localhost ~]# mkfs.xfs /dev/md5
meta-data=/dev/md5 isize=256 agcount=16, agsize=654720 blks
= sectsz=512 attr=2, projid32bit=1
= crc=0 finobt=0
data = bsize=4096 blocks=10475520, imaxpct=25
= sunit=128 swidth=256 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=0
log =internal log bsize=4096 blocks=5120, version=2
= sectsz=512 sunit=8 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
[root@localhost ~]# mount /dev/md5 /mnt/
[root@localhost ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/centos-root 18G 906M 17G 6% /
devtmpfs 903M 0 903M 0% /dev
tmpfs 913M 0 913M 0% /dev/shm
tmpfs 913M 8.6M 904M 1% /run
tmpfs 913M 0 913M 0% /sys/fs/cgroup
/dev/sda1 497M 125M 373M 25% /boot
tmpfs 183M 0 183M 0% /run/user/0
/dev/md5 40G 33M 40G 1% /mnt