HP-UX磁带备份错误收集
磁带备份命令：
make_tape_recovery -Av 默认备份至/dev/rmt/0mn。
如果有多个磁带机，那么需要使用下面命令
make_tape_recovery -Av -a /dev/rmt/1mn
lsdb#[/tmp]ioscan -fnC tape ----扫描磁带机
lsdb#[/tmp]make_tape_recovery -Av -a /dev/rmt/2mn -这个通过ioscan -fnC 查看磁带机的路径
* Creating local directories for configuration files and archive.
======= 12/21/12 18:07:42 EAT Started make_tape_recovery. (Fri Dec 21 18:07:42 EAT 2012)
@(#)Ignite-UX Revision C.7.13.240
@(#)ignite/net_recovery (opt) Revision: /branches/IUX_RA1109/ignite/src@83765 Last Modified: 2011-06-14 10:28:20 +0530 (Tue, 14 Jun 2011)
* Recovery Archive Description = Recovery Archive
* Recovery Archive Location = /dev/rmt/2mn
........
错误实例一：
备份最后报错：（PA的CPU，安腾的就没有这个错）
ERROR: System Error, /opt/ignite/bin/make_medialif failed creating boot LIF file.
ERROR: Failed to generate LIF on tape.
解决办法：
solution:In /opt/ignite/bin/make_medialif
change LIFVolSize='500000000' to LIFVolSize='750000000'.
there is obviously not enough space in the defined LIF area to hold all the files
错误实例二：多个的备份进程在执行，备份时速度很慢的，需要耐心等待，不能马上就KILL掉，容易出现这种问题。
ERROR: The make_sys_image command failed. The system recovery archive will
not be created.
* Creating local directories for configuration files and archive.
======= 09/17/13 16:39:18 EAT Started make_tape_recovery. (Tue Sep 17
16:39:18 EAT 2013)
@(#) Ignite-UX Revision C.6.0.115
@(#) net_recovery (opt) $Revision: 10.655 $
NOTE: Another make_sys_image process appears to be running.
Please wait for its completion or remove lockfile(s):
/var/tmp/ign_configure/make_sys_image_flag16491
NOTE: The other make_sys_image process still has not stopped.
NOTE: The other make_sys_image process still has not stopped.
解决办法：
#ps -ef |grep make
Kill any make_sys_image processes you find.
Kill -9 if you need to. (sometimes you need to)
Remove files from /var/tmp/ign_configure.
Try it again.
查看/var/tmp/ign_configure
把下面的文件删除，或者MV掉，重新执行make_tape_recovery -Av
http://h30499.www3.hp.com/t5/Ignite-UX/ERROR-previous-make-sys-image-process-hung/td-p/4057549
错误实例三 http://www.itpub.net/thread-529815-1-1.html
make_recovery -ACv后出现下列问题
make_recovery(466): Call to /opt/ignite/bin/make_medialif failed.
Check the /var/opt/ignite/logs/makrec.log1 file.
Cleanup
察看文件
********
Started - Wed Apr 19 03:34:01 2006
********
make_recovery -A -C -v
/opt/ignite/lbin/list_expander -d
/opt/ignite/lbin/list_expander -d
/opt/ignite/lbin/list_expander -d -v
"/opt/ignite/bin/save_config" -f "/var/opt/ignite/recovery/config.recover" "vg00
" >> "/var/opt/ignite/logs/makrec.log1" 2>&1
/usr/sbin/vgcfgbackup "vg00" >> /var/opt/ignite/logs/makrec.log1 2>&1
Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.con
f
/usr/sbin/swlist -X /opt/ignite/lib/sd_opts -l product > "/var/tmp/makrec.lasttm
p"
"/opt/ignite/bin/instl_adm" -T -f "/var/opt/ignite/recovery/config.recover" >> /
var/opt/ignite/logs/makrec.log1 2>&1
"/opt/ignite/bin/make_medialif" -v -a -f "/var/opt/ignite/recovery/config.recov
er" -l "/var/tmp/uxinstlf.recovery" -C "HP-UX System Recovery" >> /var/opt/ignit
e/logs/makrec.log1 2>&1
lifcp: Cannot create SYSCMDS ; no space on the LIF volume
make_medialif: error - lifcp SYSCMDS failed, probable insufficient size for /var
/tmp/uxinstlf.recovery
磁带是好的，磁带机是测试的
tar没有问题
stm没有问题
单单make_recovery有问题
/dev/vg00/lvol6 2072576 258304 1800320 13% /var
回答一：
这个问题我以前也碰到过，修改/opt/iignite/bin/make_medialif
修改这一段：
# Create lif volume using ipl_options
把 $ipl_options -v72000000 修改成 $ipl_options -v102000000 （把参数适当调大一点）
回答二：
是ignite的问题
错误实例四：
ERROR: Not Enough Disk Space. At least 33556500 bytes is needed for boot LIF
file.
* Creating local directories for configuration files and archive.
解决办法：
方法一：指定uxinstlf.recovery 生成目录
To resolve this problem, it is necessary to increase the disk space in
/var. In the meantime, use the -B option to specify a location other
than /var/tmp/uxinstlf.recovery where more space exists.
For example, suppose /opt has lots of space, then use:
# make_tape_recovery -Av -B /opt/uxinstlf.recovery
方法二：增加/var目录大小
因为默认路径为：The default file is /var/tmp/uxinstlf.recovery.