Informatica9.6.1在Linux Red Hat 5.8上安装遇到的问题整理

前言：

本文针对Informatica在Linux Red Hat5.8上的安装过程中遇到的问题进行整理。

 

正文：

 

1.  产品安装过程中提示无法创建Domain（[ICMD_10033] Command [defineDomain] failed with error [[INFASETUP_10002]）

 1）错误日志：

[ICMD_10033] Command [defineDomain] failed with error [[INFASETUP_10002] Cannot create the domain because of the following error: [OSGIWRAPPER_00001] Internal error. A repository internal error occurred: '[OSGIWRAPPER_00003] Internal error. A repository internal error occurred while installing the bundle from the following location: '/opt/infa/Informatica/9.6.1/plugins/dynamic/com.informatica.adapter.teradata.connection.modelRegistration_1.0.0.jar': 'An error occurred trying to read the bundle'. Contact Informatica Global Customer Support.'. Contact Informatica Global Customer Support..].

 2）问题分析及解决步骤：

Infa产品在安装时需要nofile参数值至少16K以上，系统参数的限制可以使用ulimit命令进行查看。

步骤如下：

通过扩大nofile参数的限制，至少16K（16000）。 第一步，修改文件 /etc/security/limits.conf。     vi /etc/security/limits.conf     加上：     * soft nofile 8192     * hard nofile 20480 第二步，修改 /etc/pam.d/login 文件，确保存在以下内容         session required /lib/security/pam_limits.so     另外确保/etc/pam.d/system-auth文件有下面内容     session required /lib/security/$ISA/pam_limits.so     这一行确保系统会执行这个限制。 第三步，登录infa用户，执行 #ulimit -n 1024。

 3）参考内容：

1. Re: [ICMD_10033] Command [defineDomain] failed with error  sujata kumari  PC Express Professional   sujata kumari  Aug 4, 2014 1:36 AM  (in response to user144134)    Hi, There can be couple of reasons for this failure: 1. if the installer is corrupt and is not extracted properly. To isolate this, please try downloading and extracting the installer again. But before this, please verify: 1. nofiles/file descriptor value: this value should be more than 16k for 9.6 installation. You can use the command ulimit -a to get this value. 2. We also get this error when there is insufficient disk space. Please verify this using: df -k Regards, Sujata

 

2. 产品安装过程提示Ping Domain Error 

1）错误日志：

Pinging domain... 8:19:22 AM **********************************   Command Executed : /opt/infa/Informatica/9.6.1/isp/bin/infacmd.sh  ping -dn Domain_mdm -dg mdm:6005 -re 300    Exit Code : 255   OutPut : [ICMD_10033] Command [ping] failed with error [[INFACMD_10053] [[JSF_0055] Cannot connect to the domain [Domain_mdm] to look up the service [/coreservices/DomainService]. Check the port number, host name, or service name. Ensure that network connectivity is established.Domain [Domain_mdm] Host:Port [mdm:6005] ] did not ping back. It might be due to one of the following reasons: => Domain might not be running. => Domain name, host name or port number might be incorrect. => If the domain is in TLS mode with non default SSL certificate then environment variables INFA_TRUSTSTORE and INFA_TRUSTSTORE_PASSWORD might be set to incorrect values or Truststore might not have correct domain certificate.].

2）解决办法： 

将Infa安装目录下的Java环境变量添加到Path目录 编辑infa用户下的.bash_profile文件 export PATH=$INFA_HOME/java/jre/bin:$PATH   保存后执行 Source .bash_profile   验证 [infa@mdm ~]$ java -version java version "1.7.0_55" Java(TM) SE Runtime Environment (build 1.7.0_55-b13) Java HotSpot(TM) 64-Bit Server VM (build 24.55-b03, mixed mode)

3）参考: 

Hi John, Thanks for your interest to solve this problem. I am sucessed to solve this problem. Here are the steps i followed to resolve. The Informatica services stops autmatically,  thats why the Installer unable to ping the domain. I go in to the Event Viewer for the services i found java run time environment not found. (Java runtime environment allredy installed in my mechine) I found that the environment variable for this JRE not present in the path. I updated the path Evironment variable by the installed location of the JRE. then bounce the server and I did the installations again. This time Installer ping the domain sucessfully. Thanks, Rajesh

 

 3.Repository Service启动后的页面编码问题

1）错误信息：

2）原因分析及解决步骤

原因分析： informatica产品安装背后AdminConsole的Code page默认为UTF-8，若此时创建存储库服务采用的字符集编码为简体中文，就会导致存储库服务无法正常启动。必须确保两者是一致的。

步骤如下： 

第一步，设置infa的AdminConsole’s Code page为“MS936”。 在安装完infa后，编辑.bash_profile文件，添加以下配置。 export LANG=C export LC_ALL=C export PM_CODEPAGENAME="MS936" export INFA_HOME=/opt/infa/Informatica/9.6.1 export INFA_DOMAINS_FILE=$INFA_HOME/domains.infa export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$INFA_HOME/server/bin: /home/oracle/app/oracle/product/11.2.0/dbhome_1/lib   保存后执行 Source .bash_profile 使其生效 第二步，重启PowerCenter服务。 Cd $INFA_HOME/tomcat/bin ./infaservice.sh shutdown ./infaservice.sh startup 检查服务启动情况 Netstat –an | grep 6005 第三步，删除旧的存储库服务。 第四步，删除并新建存储库服务对应的数据库用户（因为里面已经有内容，必须要重建）。 ---DROP USER DROP USER INFA_REP CASCADE; ---CREATE USER CREATE USER INFA_REP IDENTIFIED BY INFA_REP; GRANT CONNECT,RESOURCE,CREATE VIEW TO INFA_REP; 第五步，新建存储库服务，并指定Code page为Ms Windows Simplified Chinese.

 

 

4.创建Integration Service后无法启动

1）错误日志：

2）解决办法：

进入Repository Service的属性页面，将其运行模式改成Normal。